Irreversible coherent matching bonding of van der Waals heterostructure lattice by pressure.

The key of heterostructure is the combinations created by stacking various vdW materials, which can modify interlayer coupling and electronic properties, providing exciting opportunities for designer devices. However, this simple stacking does not create chemical bonds, making it difficult to fundamentally alter the electronic structure. Here, we demonstrate that interlayer interactions in heterostructures can be fundamentally controlled using hydrostatic pressure, providing a bonding method to modify electronic structures. By covering graphene with boron nitride and inducing an irreversible phase transition, the conditions for graphene lattice-matching bonding (IMB) were created. We demonstrate that the increased bandgap of graphene under pressure is well maintained in ambient due to the IMB in the interface. Comparison to theoretical modeling emphasizes the process of pressure-induced interfacial bonding, systematically generalizes, and predicts this model. Our results demonstrate that pressure can irreversibly control interlayer bonding, providing opportunities for high-pressure technology in ambient applications and IMB engineering in heterostructures.

Constructing the Fulde-Ferrell-Larkin-Ovchinnikov State in a CrOCl/NbSe2 van der Waals Heterostructure.

Time reversal symmetry breaking in superconductors, resulting from external magnetic fields or spontaneous magnetization, often leads to unconventional superconducting properties. In this way, an intrinsic phenomenon called the Fulde-Ferrell-Larkin-Ovchinnikov (FFLO) state may be realized by the Zeeman effect. Here, we construct the FFLO state in an artificial CrOCl/NbSe2 van der Waals (vdW) heterostructure by utilizing the superconducting proximity effect of NbSe2 flakes. The proximity-induced superconductivity demonstrates a considerably weak gap of about 0.12 meV, and the in-plane upper critical field reveals the behavior of the FFLO state. First-principles calculations uncover the origin of the proximitized superconductivity, which indicates the importance of Cr vacancies or line defects in CrOCl. Moreover, the FFLO state could be induced by the inherent large spin splitting in CrOCl. Our findings not only provide a practical scheme for constructing the FFLO state but also inspire the discovery of an exotic FFLO state in other two-dimensional vdW heterostructures.

Twisted MoSe2 Homobilayer Behaving as a Heterobilayer.

Heterostructures (HSs) formed by the transition-metal dichalcogenide materials have shown great promise in next-generation (opto)electronic applications. An artificially twisted HS allows us to manipulate the optical and electronic properties. In this work, we introduce the understanding of the energy transfer (ET) process governed by the dipolar interaction in a twisted molybdenum diselenide (MoSe2) homobilayer without any charge-blocking interlayer. We fabricated an unconventional homobilayer (i.e., HS) with a large twist angle (∼57°) by combining the chemical vapor deposition (CVD) and mechanical exfoliation (Exf.) techniques to fully exploit the lattice parameter mismatch and indirect/direct (CVD/Exf.) bandgap nature. These effectively weaken the interlayer charge transfer and allow the ET to control the carrier recombination channels. Our experimental and theoretical results explain a massive HS photoluminescence enhancement due to an efficient ET process. This work shows that the electronically decoupled MoSe2 homobilayer is coupled by the ET process, mimicking a "true" heterobilayer nature.

Interface Engineering of the Cu1.5Mn1.5O4/CeO2 Heterostructure for Highly Efficient Electrocatalytic Nitrate Reduction to Ammonia.

The electrochemical nitrate reduction reaction (NO3RR) is considered a sustainable technology to convert the nitrate pollutants to ammonia. However, developing highly efficient electrocatalysts is necessary and challenging given the slow kinetics of the NO3RR with an eight-electron transfer process. Here, a Cu1.5Mn1.5O4 (CMO)/CeO2 heterostructure with rich interfaces is designed and fabricated through an electrospinning and postprocessing technique. Benefiting from the strong coupling between CMO and CeO2, the optimized CMO/CeO2-2 catalyst presents excellent NO3RR performance, with NH3 Faraday efficiency (FE) up to 93.07 ± 1.45% at -0.481 V vs reversible hydrogen electrode (RHE) and NH3 yield rate up to 48.06 ± 1.32 mg cm-2 h-1 at -0.681 V vs RHE. Theoretical calculations demonstrate that the integration of CeO2 with CMO modulates the adsorption/desorption process of the reactants and intermediates, showing a reduced energy barrier in the rate determination step of NO* to N* and achieving an outstanding NO3RR performance.

Perovskite Quantum Dots Lasing in Double-Heterostructure through Energy Transfer.

Planar double heterostructures were initially investigated and have been successfully applied in III-V semiconductor lasers due to their excellent roles in confining both the photons and carriers. Here, we design and fabricate a (PEA)2Csn-1PbnX3n+1 (quasi-2D)/CsPbBr3 QD/quasi-2D double-heterostructure sandwiched in a 3/2 λ DBR microcavity, and then demonstrate a single-mode pure-green lasing with a threshold of 53.7 µJ/cm2 under nanosecond-pulsed optical pumping. The thresholds of these heterostructure devices decrease statistically by about 50% compared to the control group with no energy donor layers, PMMA/QD/PMMA in an identical microcavity. We show that there is efficient energy transfer from the barrier regions of the quasi-2D phases to the QD layer by transient absorption and luminescence lifetime spectra and that such energy transfer leads to marked threshold reduction. This work indicates that the double-heterostructure configurations should play a significant role in the future perovskite electrically pumped laser.

Resonant Tunneling-Enhanced Photoresponsivity in a Twisted Graphene van der Waals Heterostructure.

Leveraging its ultrahigh carrier mobility, zero-bandgap linear dispersion, and extremely short response time, graphene exhibits remarkable potential in ultrafast broad-band photodetection. Nonetheless, the inherently low responsivity of graphene photodetectors, due to the low photogenerated carrier density, significantly impedes the development of practical devices. In this study, we present an improved photoresponse within a graphene-hexagonal boron nitride-graphene vertical tunnel junction device, where the crystallographic orientation of the two graphene electrodes is aligned. Through meticulous device structure design and the adjustment of bias and gate voltages, we observe a 2 orders of magnitude increase in tunneling photocurrent, which is attributed to the momentum-conserving resonant electron tunneling. The enhanced external photoresponsivity is evident across a wide temperature and spectral range and achieves 0.7 A/W for visible light excitation. This characteristic, coupled with the device's negative differential conductance, suggests a novel avenue for highly efficient photodetection and high-frequency, logic-based optoelectronics using van der Waals heterostructures.

Light-Triggerable and Gate-Tunable Negative Differential Resistance in Small Molecules Heterojunction.

Negative differential resistance (NDR), a phenomenon in which the current decreases when the applied voltage is increased, is attracting attention as a unique electrical property. Here, we propose a broad spectral photo/gate cotunable channel switching NDR (CS-NDR) device. The proposed CS-NDR device has superior linear gate-tunable NDR behavior and highly reproducible properties compared to the previously reported NDR devices, as the fundamental mechanism of the CS-NDR device is directly related to a charge transport channel switching by the linear increase of the applied drain voltage. We also experimentally demonstrate that the photoinduced NDR behavior of the CS-NDR device was derived from the grain boundaries of dinaphtho[2;3-b:2',3'-f]-thieno[3,2-b]thiophene. Furthermore, this work produces a 9 × 9 CS-NDR device array composed of 81 devices, providing the reproducibility and uniformity of the CS-NDR device. Finally, we successfully demonstrate the detection of text images with 81 CS-NDR devices using the proposed photo/gate cotunable NDR behavior.

Altermagnetism Induced by Sliding Ferroelectricity via Lattice Symmetry-Mediated Magnetoelectric Coupling.

Altermagnets, distinct from conventional ferromagnets or antiferromagnets, have recently attracted attention as the third category of collinear magnets, which exhibit the coexistence of zero net magnetization and spin polarization due to their unique lattice symmetries. Meanwhile, the additional layer degrees of freedom in multilayer sliding ferroelectrics offer opportunities for coupling with lattice symmetries, paving the way for an innovative approach to constructing multiferroic lattices. In this study, altermagnetic tuning in SnS2/MnPSe3/SnS2 heterostructures is achieved by breaking and restoration of lattice inversion symmetry through sliding ferroelectric switching. First-principles calculations reveal that the spin density and corresponding time-reversal symmetry of MnPSe3 can be manipulated by lattice symmetry, triggering phase transitions between antiferromagnetism and altermagnetism. This research establishes a novel form of magnetoelectric coupling mediated by lattice symmetry and provides a theoretical basis for the design of miniature information processing and memory devices based on altermagnetism.

Epitaxial Growth of Two-Dimensional MoO2-MoSe2 Metal-Semiconductor Heterostructures for Schottky Diodes.

The metal-semiconductor interface fabricated by conventional methods often suffers from contamination, degrading transport performance. Herein, we propose a one-pot chemical vapor deposition (CVD) process to create a two-dimensional (2D) MoO2-MoSe2 heterostructure by growing MoO2 seeds under a hydrogen environment, followed by depositing MoSe2 on the surface and periphery. The ultraclean interface is verified by cross-sectional scanning transmission electron microscopy and photoluminescence. Along with the high work function of semimetallic MoO2 (Ef = -5.6 eV), a high-rectification Schottky diode is fabricated based on this heterostructure. Furthermore, the Schottky diode exhibits an excellent photovoltaic effect with a high open-circuit voltage of 0.26 eV and ultrafast photoresponse, owing to the naturally formed metal-semiconductor contact with suppressed pinning effect. Our method paves the way for the fabrication of an ultraclean 2D metal-semiconductor interface, without defects or contamination, offering promising prospects for future nanoelectronics.

Heterostructured Pt-PbS Nanobelt Achieves Remarkable Direct Formic Acid Oxidation Catalysis.

Developing efficient and CO-tolerant platinum (Pt)-based anodic catalysts is challenging for a direct formic acid fuel cell (DFAFC). Herein, we report heterostructured Pt-lead-sulfur (PtPbS)-based nanomaterials with gradual phase regulation as efficient formic acid oxidation reaction (FAOR) catalysts. The optimized Pt-PbS nanobelts (Pt-PbS NBs/C) display the mass and specific activities of 5.90 A mgPt-1 and 21.4 mA cm-2, 2.2/1.2, 1.5/1.1, and 36.9/79.3 times greater than those of PtPb-PbS NBs/C, Pt-PbSO4 NBs/C, and commercial Pt/C, respectively. Simultaneously, it exhibits a higher membrane electrode assembly (MEA) power density (183.5 mW cm-2) than commercial Pt/C (40.3 mW cm-2). This MEA stably operates at 0.4 V for 25 h, demonstrating a competitive potential of device application. The distinctive heterostructure endows the Pt-PbS NBs/C with optimized dehydrogenation steps and resisting the CO poisoning, thus presenting the remarkable FAOR performance. This work paves an effective avenue for creating high-performance anodic catalysts for fuel cells and beyond.

Electrically Controlled High Sensitivity Strain Modulation in MoS2 Field-Effect Transistors via a Piezoelectric Thin Film on Silicon Substrates.

Strain can modulate bandgap and carrier mobilities in two-dimensional (2D) materials. Conventional strain-application methodologies relying on flexible/patterned/nanoindented substrates are limited by low thermal tolerance, poor tunability, and/or scalability. Here, we leverage the converse piezoelectric effect to electrically generate and control strain transfer from a piezoelectric thin film to electromechanically coupled 2D MoS2. Electrical bias polarity change across the piezo film tunes the nature of strain transferred to MoS2 from compressive (∼0.23%) to tensile (∼0.14%) as verified through Raman and photoluminescence spectroscopies and substantiated by density functional theory calculations. The device architecture, on silicon substrate, integrates an MoS2 field-effect transistor on a metal-piezoelectric-metal stack enabling strain modulation of transistor drain current (130×), on/off ratio (150×), and mobility (1.19×) with high precision, reversibility, and resolution. Large, tunable tensile (1056) and compressive (-1498) strain gauge factors, electrical strain modulation, and high thermal tolerance promise facile integration with silicon-based CMOS and micro-electromechanical systems.

Spatial Filtering of Interlayer Exciton Ground State in WSe2/MoS2 Heterobilayer.

Long-life interlayer excitons (IXs) in transition metal dichalcogenide (TMD) heterostructure are promising for realizing excitonic condensates at high temperatures. Critical to this objective is to separate the IX ground state (the lowest energy of IX state) emission from other states' emissions. Filtering the IX ground state is also essential in uncovering the dynamics of correlated excitonic states, such as the excitonic Mott insulator. Here, we show that the IX ground state in the WSe2/MoS2 heterobilayer can be separated from other states by its spatial profile. The emissions from different moiré IX modes are identified by their different energies and spatial distributions, which fits well with the rate-diffusion model for cascading emission. Our results show spatial filtering of the ground state mode and enrich the toolbox to realize correlated states at elevated temperatures.

Electronic and Transport Properties of InSe/PtTe2 van der Waals Heterostructure.

Two-dimensional (2D) InSe and PtTe2 have drawn extensive attention due to their intriguing properties. However, the InSe monolayer is an indirect bandgap semiconductor with a low hole mobility. van der Waals (vdW) heterostructures produce interesting electronic and optoelectronic properties beyond the existing 2D materials and endow totally new device functions. Herein, we theoretically investigated the electronic structures, transport behaviors, and electric field tuning effects of the InSe/PtTe2 vdW heterostructures. The calculated results show that the direct bandgap type-II vdW heterostructures can be realized by regulating the stacking configurations of heterostructures. By applying an external electric field, the band alignment and bandgap of the heterostructures can also be flexibly modulated. Particularly, the hole mobility of the heterostructures is improved by 2 orders of magnitude to ∼103 cm2 V-1 s-1, which overcomes the intrinsic disadvantage of the InSe monolayer. The InSe/PtTe2 vdW heterostructures have great potential applications in developing novel optoelectronic devices.

Surface-Diffusion-Induced Amorphization of Pt Nanoparticles over Ru Oxide Boost Acidic Oxygen Evolution.

Phase transformation offers an alternative strategy for the synthesis of nanomaterials with unconventional phases, allowing us to further explore their unique properties and promising applications. Herein, we first observed the amorphization of Pt nanoparticles on the RuO2 surface by in situ scanning transmission electron microscopy. Density functional theory calculations demonstrate the low energy barrier and thermodynamic driving force for Pt atoms transferring from the Pt cluster to the RuO2 surface to form amorphous Pt. Remarkably, the as-synthesized amorphous Pt/RuO2 exhibits 14.2 times enhanced mass activity compared to commercial RuO2 catalysts for the oxygen evolution reaction (OER). Water electrolyzer with amorphous Pt/RuO2 achieves 1.0 A cm-2 at 1.70 V and remains stable at 200 mA cm-2 for over 80 h. The amorphous Pt layer not only optimized the *O binding but also enhanced the antioxidation ability of amorphous Pt/RuO2, thereby boosting the activity and stability for the OER.

Constructing ZnTe Spherical Quantum Well for Efficient Light Emission.

ZnTe colloidal semiconductor nanocrystals (NCs) have shown promise for light-emitting diodes (LEDs) and displays, because they are free from toxic heavy metals (Cd). However, so far, their low photoluminescence (PL) efficiency (∼30%) has hindered their applications. Herein, we devised a novel structure of ZnTe NCs with the configuration of ZnSe (core)/ZnTe (spherical quantum well, SQW)/ZnSe (shell). The inner layer ZnTe was grown at the surface of ZnSe core with avoiding using highly active and high-risk Zn sources. Due to the formation of coherently strained heterostructure which reduced the lattice mismatch, and the thermodynamic growth of ZnTe, the surface or interface defects were suppressed. A high PL efficiency of >60% was obtained for the green light-emitting ZnSe/ZnTe/ZnSe SQWs after ZnS outer layer passivation, which is the highest value for colloidal ZnTe-based NCs. This work paves the way for the development of novel semiconductor NCs for luminescent and display applications.

High-Temperature Superlubricity in MoS2/Graphene van der Waals Heterostructures.

Achieving high-temperature superlubricity is essential for modern extreme tribosystems. Solid lubrication is the sole viable alternative due to the degradation of liquid ones but currently suffers from notable wear, instability, and high friction coefficient. Here, we report robust superlubricity in MoS2/graphene van der Waals heterostructures at high temperatures up to ∼850 K, achieved through localized heating to enable reliable friction testing. The ultralow friction of the MoS2/graphene heterostructure is found to be notably further reduced at elevated temperature and dominantly contributed by the MoS2 edge. The observation can be well described by a multi-contact model, wherein the thermally activated rupture of edge-contacts facilitates the sliding. Our results should be applicable to other van der Waals heterostructures and shed light on their applications for superlubricity at elevated temperature.

Epitaxial Heterostructures of CsPbBr3 Perovskite Nanocrystals with Post-transition Metal Bismuth.

The facet chemistry of halide perovskite nanocrystals plays a key role in designing nanoscale epitaxial heterostructures. However, despite significant successes achieved in designing these nanocrystals, their heterostructures with several leading transition metals could not be established yet. Herein, the possible heterostructures of metals beyond transition metals are explored and the epitaxial combinations of soft CsPbBr3 nanocrystals with the post-transition metal Bi(0) are reported. These heterostructures are built with interfacing facets having hexagonal atomic configurations of both the rhombicuboctahedron CsPbBr3 and octahedral Bi(0). A high reaction temperature and the presence of alkylamine kept Bi(III) in reduced form and helped in sustaining these CsPbBr3-Bi(0) heteronanocrystals. Since understanding of and synthesis optimization of metal-halide perovskite heterostructures are limited, this finding adds a new fundamental insight in designing ionic and nonionic materials heterojunctions. Furthermore, oxidation and sulfidation of Bi(0) are studied, and the possible oxide/sulfide heterostructures with CsPbBr3 are discussed.

Multistate Ferroelectric Diodes with High Electroresistance Based on van der Waals Heterostructures.

Some van der Waals (vdW) materials exhibit ferroelectricity, making them promising for novel nonvolatile memories (NVMs) such as ferroelectric diodes (FeDs). CuInP2S6 (CIPS) is a well-known vdW ferroelectric that has been integrated with graphene for memory devices. Here we demonstrate FeDs with self-rectifying, hysteretic current-voltage characteristics based on vertical heterostructures of 10 nm thick CIPS and graphene. By using vdW indium-cobalt top electrodes and graphene bottom electrodes, we achieve a high electroresistance (on- and off-state resistance ratios) of ∼106, an on-state rectification ratio of 2500 for read/write voltages of 2 V/0.5 V, and a maximum output current density of 100 A/cm2. These metrics compare favorably with state-of-the-art FeDs. Piezoresponse force microscopy measurements show that stabilization of intermediate net polarization states in CIPS leads to stable multibit data retention at room temperature. The combination of two-terminal design, multibit memory, and low-power operation in CIPS-based FeDs is potentially interesting for compute-in-memory and neuromorphic computing applications.

Tuning Exciton Emission via Ferroelectric Polarization at a Heterogeneous Interface between a Monolayer Transition Metal Dichalcogenide and a Perovskite Oxide Membrane.

We demonstrate the integration of a thin BaTiO3 (BTO) membrane with monolayer MoSe2 in a dual-gate device that enables in situ manipulation of the BTO ferroelectric polarization with a voltage pulse. While two-dimensional (2D) transition metal dichalcogenides (TMDs) offer remarkable adaptability, their hybrid integration with other families of functional materials beyond the realm of 2D materials has been challenging. Released functional oxide membranes offer a solution for 2D/3D integration via stacking. 2D TMD excitons can serve as a local probe of the ferroelectric polarization in BTO at a heterogeneous interface. Using photoluminescence (PL) of MoSe2 excitons to optically read out the doping level, we find that the relative population of charge carriers in MoSe2 depends sensitively on the ferroelectric polarization. This finding points to a promising avenue for future-generation versatile sensing devices with high sensitivity, fast readout, and diverse applicability for advanced signal processing.

Engineering 2D Material Exciton Line Shape with Graphene/h-BN Encapsulation.

Control over the optical properties of atomically thin two-dimensional (2D) layers, including those of transition metal dichalcogenides (TMDs), is needed for future optoelectronic applications. Here, the near-field coupling between TMDs and graphene/graphite is used to engineer the exciton line shape and charge state. Fano-like asymmetric spectral features are produced in WS2, MoSe2, and WSe2 van der Waals heterostructures combined with graphene, graphite, or jointly with hexagonal boron nitride (h-BN) as supporting or encapsulating layers. Furthermore, trion emission is suppressed in h-BN encapsulated WSe2/graphene with a neutral exciton red shift (44 meV) and binding energy reduction (30 meV). The response of these systems to electron beam and light probes is well-described in terms of 2D optical conductivities of the involved materials. Beyond fundamental insights into the interaction of TMD excitons with structured environments, this study opens an unexplored avenue toward shaping the spectral profile of narrow optical modes for application in nanophotonic devices.