Dynamically guided transantral piezoelectric endodontic microsurgery: A case report with technical considerations.

AIM: Endodontic microsurgery (EMS) of maxillary molars may represent a complex challenge to the clinician due to the location of the roots and the proximity of the maxillary sinus floor. This report aimed to describe the simultaneous use of a computer-assisted dynamic navigation (C-ADN) system and piezoelectric bony-window osteotomy for the transantral microsurgical approach of a maxillary left first molar with adequate root canal filling and symptomatic apical periodontitis. SUMMARY: This case report highlights the importance of C-ADN to carry out a minimally invasive buccal surgical access to palatal roots affected by apical periodontitis and provides a practical example to help clinicians make treatment decisions based on the available evidence. Clinical and tomographic evaluations were performed before the surgical procedure and at 24-month follow-up. This case was treated using a C-ADN system fitted to a piezotome for the buccal approach of the buccal roots, maxillary sinus membrane lifting, and for transantral location, root-end resection, cavity preparation, and filling of the palatal root. The navigation system allowed to achieve an accurate apical canal terminus location and root-end filling of the three roots with a minimally invasive piezoelectric crypt approach. At the 24-month follow-up examination, the patient remains asymptomatic, with normal periapical structures, and regeneration of maxillary sinus walls. It was concluded that the combination of dynamic navigation with piezoelectric bony-window osteotomy offers enhanced accuracy, tissue preservation, diminished risk of iatrogenic complications, and could maximize success and survival rates in transantral EMS.

The impact of bone grafting with/without barrier membrane placement on the outcome of apical surgery: A systematic review and meta-analysis.

BACKGROUND: Regenerative techniques are increasingly being advocated in endodontic apical surgery (AS) to enhance the healing of periapical lesions. Various grafting and membrane materials are employed as adjuncts to modern AS. OBJECTIVES: This systematic review aimed to answer the following PICO question: In patients with apical periodontitis (P) what is the impact of bone grafting with/without barrier membrane materials (I) compared with surgery without grafting materials (C) on the outcome of AS evaluated clinically and radiographically (O). METHODS: A systematic search was conducted in four databases (Embase, Web of Science, PubMed and Cochrane Central Register of Controlled Trials) until 1 August 2023. Google Scholar was also manually searched. Studies with a prospective randomized design were included. Cochrane risk-of-bias (RoB) tool 2.0 assessed bias. Two independent reviewers performed the study selection, data extraction and appraisal of studies. Meta-analysis was performed using R3.5.1 software. RESULTS: From the identified 2582 studies, eight randomized clinical trials were included for meta-analysis. Two studies had low RoB, while six had some concerns. Analysis revealed significantly better outcomes when surgery involved bone regeneration techniques than conventional surgery (OR = 2.18, 95% CI: 1.32-4.31, p = .004). Subgroup analyses on individual grafts (OR = 0.22, 95% CI: -0.99 to 1.44, p = .720) (OR = -0.09, 95% CI: -1.42 to 1.23, p = .885) and membranes (OR = -1.09, 95% CI: -2.94 to 0.76, p = .247) and their combinations (OR = 0.03, 95% CI: -1.50 to 1.55, p = .970) did not yield any significant results. The type of membrane used did not significantly impact the outcome (OR = -1.09, 95% CI: -2.94 to 0.76, p = .247) nor did altering the combination of graft/membrane. DISCUSSION: This systematic review examined the effects of bone grafting with/without membrane placement on the outcome of AS. It highlights the potential advantages of regenerative techniques and the need for further research in this area. CONCLUSIONS: Based on current evidence, bone grafting with/without barrier membrane placement significantly improves healing after AS. Subgroup analysis of resorbable membranes or grafting did not significantly influence the outcome. The combination of membrane and graft was also not significant. Future well-designed, randomized controlled trials in this area are essential before these materials can be recommended for routine use to enhance healing outcomes in AS. REGISTRATION: PROSPERO (CRD42021255171).

Clinical outcomes of endodontic microsurgery in complicated cases with large or through-and-through lesions: a retrospective longitudinal study.

OBJECTIVES: To investigate the clinical outcomes of endodontic microsurgery in complicated cases presenting with large or through-and-through lesions. MATERIALS AND METHODS: We retrospectively collected and analyzed preoperative, intraoperative, and follow-up data from 143 complicated cases that underwent endodontic microsurgery. Clinical outcomes were assessed in terms of tooth survival and surgery success. Cox regression analysis was used to evaluate the survival rate and identify associated risk factors. Additionally, the success rate was compared across different postoperative periods, and potential factors contributing to surgical failure were identified through binary logistic regression. RESULTS: The overall survival and success rates were 93.0% and 91.7%, respectively. The Cox regression model identified four risk factors affecting tooth survival, including apicoectomy of four teeth (HR = 35.488; P = 0.0002), an open apex observed on preoperative radiographs (HR = 6.300; P = 0.025), the performance of guided tissue regeneration technique (HR = 8.846; P = 0.028), and a palatal surgical approach (HR = 8.685; P = 0.030). The success rate demonstrated an initial increase in the early postoperative period (from 0.5 to 2 years; P = 5.8124e-30), followed by stabilization (from 2 to 9 years; P = 0.298). Surgery success rate significantly declined when apicoectomy involved four teeth (OR = 109.412; P = 0.002). CONCLUSIONS: Endodontic microsurgery demonstrates satisfactory outcomes in complicated cases, maintaining a stable success rate after two years. However, tooth survival and surgery success are significantly compromised when apicoectomy involves four teeth. Factors such as guided tissue regeneration, an open apex, and the palatal surgical approach are associated with an increased risk of tooth extraction. CLINICAL RELEVANCE: Despite achieving acceptable outcomes in complicated cases, endodontic microsurgery is adversely affected by the apicoectomy of four teeth.

Accuracy and efficiency of dynamic navigated root-end resection in endodontic surgery: a pilot in vitro study.

BACKGROUND: The operation accuracy and efficiency of dynamic navigated endodontic surgery were evaluated through in vitro experiments. This study provides a reference for future clinical application of dynamic navigation systems in endodontic surgery. MATERIALS AND METHODS: 3D-printed maxillary anterior teeth were used in the preparation of models for endodontic surgery. Endodontic surgery was performed with and without dynamic navigation by an operator who was proficient in dynamic navigation technology but had no experience in endodontic surgery. Optical scanning data were applied to evaluate the length and angle deviations of root-end resection. And the operation time was recorded. T tests were used to analyze the effect of dynamic navigation technology on the accuracy and duration of endodontic surgery. RESULTS: With dynamic navigation, the root-end resection length deviation was 0.46 ± 0.06 mm, the angle deviation was 2.45 ± 0.96°, and the operation time was 187 ± 22.97 s. Without dynamic navigation, the root-end resection length deviation was 1.20 ± 0.92 mm, the angle deviation was 16.20 ± 9.59°, and the operation time was 247 ± 61.47 s. Less deviation was achieved and less operation time was spent with than without dynamic navigation (P < 0.01). CONCLUSION: The application of a dynamic navigation system in endodontic surgery can improve the accuracy and efficiency significantly for operators without surgical experience and reduce the operation time.

A novel simplified approach for endodontic retrograde surgery in short single-rooted teeth.

BACKGROUND: High technical thresholds, long operative times, and the need for expensive and specialized equipment impede the widespread adoption of endodontic microsurgery in many developing countries. This study aimed to compare the effects of a simplified, cost-effective, and time-efficient surgical approach involving orthograde obturation using biological ceramic material greater than 6 mm combined with apicoectomy for single-rooted teeth with short lengths with those of the conventional and current standard methods. MATERIALS AND METHODS: Forty-five premolars equally categorized into three groups: conventional surgery group, standard surgery group, and modified surgery group. A µCT scan was used to calculate the volume of voids. A micro-leakage test and scanning electron microscope (SEM) were performed to assess the sealing effect. Additionally, four cases of chronic periapical periodontitis in the anterior region were selected, and the patients received either the modified approach or the standard surgery for endodontic microsurgery. RESULTS: The volumes of voids in the apical 0-3 mm of the modified group and the standard group were comparable. The micro-leakage test and SEM examination demonstrated closely bonded fillings in the dentinal walls in both the modified surgery group and standard surgery group. The outcomes of the preliminary application of this modified procedure on patients were successful at the time of the follow-up cutoff. CONCLUSIONS: The modified surgery group exhibited similar root canal filling and apical sealing abilities with the standard procedure for single-rooted teeth with short lengths (< 20 mm). The preliminary application of this modified surgical procedure achieved favorable results.

Bacterial sealing ability of calcium silicate-based sealer for endodontic surgery: an in-vitro study.

BACKGROUND: Apical surgery with standard retrograde maneuvers may be challenging in certain cases. Simplifying apical surgery to reduce operating time and streamline retrograde manipulation is an emerging need in clinical endodontics. AIM OF THE STUDY: The aim of the study was to compare the bacterial sealing ability of a calcium silicate-based sealer with the single cone technique combined with root end resection only, and calcium silicate-based sealer as a retrograde filling versus MTA retrofilling, and to analyze bacterial viability using confocal laser scanning microscope (CLSM). MATERIALS AND METHODS: In this in vitro experimental study, 50 extracted human maxillary incisor teeth were instrumented and randomly divided into five groups: three experimental groups, a positive control group, and a negative control group (n = 10/group). In the experimental groups, the roots were obturated using the single cone technique (SCT) and a calcium silicate-based sealer. In group 1, the roots were resected 3 mm from the apex with no further retrograde preparation or filling. In groups 2 and 3, the roots were resected, retroprepared, and retrofilled with either a calcium silicate-based sealer or MTA, respectively. Group 4 (positive control) was filled with a single gutta-percha cone without any sealer. In group 5 (negative control), the canals were left empty, and the roots were sealed with wax and nail varnish. A bacterial leakage model using Enterococcus faecalis was employed to assess the sealing ability over a 30-day period, checking for turbidity and analyzing colony forming units (CFUs) per milliliter. Five specimens from each group were examined using CLSM for bacterial viability. Data for the bacterial sealing ability were statistically analyzed using chi-squared and Kruskal-Wallis tests. RESULTS: The three experimental groups did not show significant differences in terms of bacterial leakage, or bacterial counts (CFUs) (P > 0.05). However, significant differences were observed when comparing the experimental groups to the positive control group. Notably, the calcium silicate-based sealer, when used as a retrofilling, yielded the best sealing ability. CLSM imaging revealed viable bacterial penetration in all the positive control group specimens while for the experimental groups, dead bacteria was the prominent feature seen. CONCLUSION: Within the limitations of this study, it could be concluded that the bacterial sealing ability of calcium silicate-based sealer with the single cone technique combined with root end resection only and calcium silicate-based sealer as a retrograde filling were comparable with MTA retrofilling during endodontic surgical procedures.

Present status and future directions: Surgical endodontics.

Endodontic surgery encompasses several procedures for the treatment of teeth with a history of failed root canal treatment, such as root-end surgery, crown and root resections, surgical perforation repair and intentional replantation. Endodontic microsurgery is the evolution of the traditional apicoectomy techniques and incorporates high magnification, ultrasonic root-end preparation and root-end filling with biocompatible filling materials. Modern endodontic surgery uses the dental operating microscope, incorporates cone-beam computed tomography (CBCT) for preoperative diagnosis and treatment planning, and has adopted piezoelectric approaches to osteotomy and root manipulation. Crown and root resection techniques have benefitted from the same technological advances. This review focuses on the current state of root-end surgery by comparing the techniques and materials applied during endodontic microsurgery to the most widely used earlier methods and materials. The most recent additions to the clinical protocol and technical improvements are discussed, and an outlook on future directions is given. Whilst nonsurgical retreatment remains the first choice to address most cases with a history of endodontic failure, modern endodontic microsurgery has become a predictable and minimally invasive alternative for the retention of natural teeth.

Spectrophotometric analysis evaluating apical microleakage in retrograde filling using GIC, MTA and biodentine: an in-vitro study.

BACKGROUND: The present study compares the apical microleakage of three different root-end filling materials in which the retrograde cavity is prepared by two different burs. METHODS: Eighty extracted single rooted maxillary and mandibular premolars were taken. Root canal treatment was completed. Apical 3 mm of all the teeth were resected with diamond disk. The tooth were divided into four groups with two subgroups for each group containing 10 tooth (N = 10) as: Group IA (Negative Control and IB (Positive Control); Group IIA and IIB: Prepared with round carbide bur and round diamond bur respectively, filled with GIC; Group IIIA and IIIB: Prepared with round carbide bur and round diamond bur respectively, filled with MTA; Group IVA and IVB: Prepared with round carbide bur and round diamond bur, filled with Biodentine. After applying two coats of nail varnish leaving apical 3 mm (except for negative control group) all teeth were immersed in 2% methylene blue for 3 days and again in 65% nitric acid for next 3 days for extraction of dye. The obtained solution was then transferred to eppendorf tube and centrifuged in microcentrifuges at 14,000 revolution per minutes (RPM) for 5 min. Optical density or absorbance of the supernatant solution was measured with UV spectrophotometer at 550 nm. RESULTS: The absorbance of the supernatant solution after dye extraction is decreasing in the order of positive control> GIC > MTA > Biodentine> negative control group. The significant difference was observed between GIC and MTA (p = 0.0001) and GIC and Biodentine (p = 0.0001) with two different burs but statistically non-significant difference was observed between MTA and Biodentine with Carbide bur (p = 0.127) and Diamond bur (p = 0.496) respectively. CONCLUSIONS: Within the limitations of the present study, it can be concluded that Biodentine and MTA showed less microleakage as compared to GIC. There is no significant difference between mean microleakage of MTA and Biodentine. However, the mean OD of the Biodentine was least of all evaluated materials. Preparation of the root-end using round carbide bur as well as round diamond burs showed comparable microleakage for all three filling materials.

Assessment of Simultaneous Surgery for Odontogenic Sinusitis: Endoscopic Sinus Surgery With Endoscopic Apicoectomy.

Odontogenic sinusitis (OS) is a disease commonly encountered by otolaryngologists and oral surgeons. There is currently no standard consensus for the management of the causative teeth of OS, and the therapeutic outcomes of endodontic surgery remain unclear. The authors herein report the outcomes of simultaneous surgery for OS, endoscopic sinus surgery (ESS) with endoscopic apicoectomy. Twenty-one OS patients who underwent ESS were included in the intent-to-treat population. Eleven patients who simultaneously underwent endoscopic apicoectomy were included as the study group, and another 10 patients who were subjected to the extraction of the causative teeth preceding or during surgery were included as the control group. The postoperative tooth course after surgery in the study group was assessed as the primary outcome by periodic radiographs. The postoperative sinus course was compared between the 2 groups as the secondary outcome. Seventeen teeth were subjected to endoscopic apicoectomy concurrently with ESS, and the treatment success rate for periapical lesions was 94.1% (16 out of 17 teeth), which was consistent with previously reported outcomes for endodontic microsurgery. Ten of 11 patients (90.9%) had good postoperative sinus courses, and the mean wound-healing period of the sinus mucosa was 6.9 ±â€Š3.5 weeks. These results were not significantly different from those obtained for the control group (90% and 6.1 ±â€Š3.2 weeks). This surgical procedure may contribute to the preservation of causative teeth without having an impact on the successful treatment of sinusitis. A comprehensive surgical approach by otolaryngologists and oral surgeons is desirable for the treatment of OS.

Contemporary CBCT diagnostics-discovery of a new artery with possible impact on surgical planning: the anterior superior palatal alveolar artery.

PURPOSE: An ongoing clinical trial regarding intra- and post-surgical morbidity in maxillary apicoectomies showed significant higher morbidity for upper canines and palatal roots of upper 1st premolars. Analysis of available presurgical cone beam computed tomography (CBCT)-scans revealed the existence of an unknown bone-canal branching off from the bone-canal or groove of the anterior superior alveolar artery (asaa). Aim of the study was the determination of the contents of this newly found bone canal in human cadaver heads, its prevalence as possible standard anatomical structure and its automatized detection with a contemporary high-resolution TRIUM-CBCT-device in vivo. METHODS: 35 human cadaver heads were dissected, the prevalence of the bone-canal determined and its contents analyzed by histology. 835 consecutive routine high-resolution TRIUM-CBCT-scans from routine patients were analyzed by an automatized detection- and tracing-algorithm for in vivo-determination of prevalence of this bone canal. Automatized detection and additional manual tracing were statistically evaluated by SSPS 20.0 software. RESULTS: The bone-canal was found in 96% of the anatomical specimens, its content identified as artery not described until now and named after the first finder "Arteria Kurrekii". Automatized tracing of TRIUM-CBCT-scans with additional manual tracing revealed an in vivo prevalence of this newly found artery of 95% (p ≤ 0.05). CONCLUSIONS: The newly found anterior superior palatal alveolar artery (aspaa-"Arteria Kurrekii") might have the same clinical impact for surgical procedures in the maxilla as the posterior superior alveolar artery (psaa). Its first detection was enabled by high-resolution TRIUM-CBCT devices and prevalence as standard anatomical structure proven in vivo by automatized CBCT-scan analysis.

[Computer aided design and three-dimensional printing for apicoectomy guide template].

OBJECTIVE: To establish an apicoectomy guide template design and manufacturing method, based on multi-source data fusion, computer aided design (CAD) and fused deposition modeling (FDM). The feasibility of the guide template was preliminary evaluated by the in vitro model experiment. METHODS: An extracted upper anterior tooth, after root canal treatment, was optical scanned, after which the extracted upper anterior tooth was poured in an apicoectomy plaster model. Cone-beam computed tomography (CBCT) scanning of the apicoectomy plaster model was performed, after which optical scanning of the plaster model for apical resection surgery was carried out. All of the relevant CBCT and optical scanning data of the extracted upper anterior tooth and the apicoectomy plaster model were introduced into the Geomagic Studio 2012 software. The multi-source data fusion technology was used to virtually simulate the three-dimensional positional relationship of the extracted tooth, the dentition, the alveolar bone and the gingival, based on which, the three-dimensional design of the apicoectomy guide template was completed in the Geomagic Studio 2012 software. With the technology of fused deposition modeling, the apical resection surgical guide template was three-dimensionally printed with the material of polylactic acid (PLA). Under the guidance of the surgical guide template, the root apical resection was performed on the plaster model. After the apicoectomy, the extracted upper anterior tooth was taken off from the apicoectomy plaster model and then was given the optical scanning. The apical resection length and angle were calculated by the function of distance measurement and angle measurement, and the results were compared with the preset values. RESULTS: The length of the apical resection was 2.88 mm along the direction of the long axis of the tooth, which was 0.12 mm lower than the preset 3 mm. The included angle between the apical resection plane and the long axis of the tooth was 77.9°, 12.1° lower than the preset 90°. CONCLUSION: This study successfully established a digital design and production method of apicoectomy guide template by combing the multi-source data fusion, CAD and FDM technology. The design route and the production method are feasible. The study will provide a technology and methodology reference for the development of domestic special software for the digital design of apicoectomy guide template.

Enlargement of the apical foramen of mature teeth by instrumentation and apicoectomy. A study of effectiveness and the formation of dentinal cracks.

OBJECTIVE: In the last few years there have been attempts to revascularize mature necrotic teeth instead of performing a standard root canal treatment. Apical foramen enlargement (AFE) would be necessary for regenerative treatments of mature teeth. In the literature, AFE has been made through apicoectomy and instrumentation. However, no standardized methods have been described yet, which may affect the success of the therapy. Our aim was to describe the effectiveness and damage to dental structures of five methods for AFE. METHODS: Two hundred and ten human teeth were assigned to one control group (n = 10) and four treatment groups (n = 50 each): instrumentation was up to file #80 0.5 mm coronal to the apex (I), at apex level (II), 0.5 mm beyond the apex (III) and apicoectomy at 2 and 4 mm from the apex (IV). The apical foramen diameter was measured before and after treatment. The formation of clinically visible fractures (CVF) and microcracks was analysed clinically and with ESEM, respectively. Thirty-two in situ sheep's teeth were also instrumented, to compare damage in in situ and ex vivo teeth. RESULTS: The foramen diameter was augmented by 0.15, 0.47, 0.54 0.06 and 0.32 mm in human teeth of groups I, II, III, apicoectomy at 2 and 4 mm, respectively. CVF were more frequent as the working length was augmented. No statistical differences were found for microcrack formation. In situ teeth showed significantly less damage. CONCLUSIONS: Instrumentation at apex level seems to be the most effective and least harmful technique for AFE, while apicoectomy is not a useful method.

Lasers in Apicoectomy: A Brief Review.

Since the invention of laser, various applications for lasers in endodontics have been proposed, such as disinfection of the root canal system, canal shaping, pulp diagnosis, and apico-ectomy. One of the major applications of laser in endodontics is apicoectomy. The aim of this article is to review the benefits and drawbacks of laser applications in apicoectomy, including effect on apical seal, effect on dentin permeability, effect on postsurgery pain, effect on crack formation, effect on root-end morphology, effect on treatment outcome, and connective tissue response to laser-treated dentin.

The resection angle in apical surgery: a CBCT assessment.

OBJECTIVES: The primary objective of the present radiographic study was to analyse the resection angle in apical surgery and its correlation with treatment outcome, type of treated tooth, surgical depth and level of root-end filling. MATERIALS AND METHODS: In the context of a prospective clinical study, cone beam computed tomography (CBCT) scans were taken before and 1 year after apical surgery to measure the angle of the resection plane relative to the longitudinal axis of the root. Further, the surgical depth (distance from the buccal cortex to the most lingual/palatal point of the resection plane) as well as the level of the root-end filling relative to the most coronal point of the cut root face was determined. Treated teeth were categorized into four groups (maxillary and mandibular anterior and posterior teeth). The final material comprised 62 treated roots in 55 teeth. RESULTS: The mean calculated resection angle of all roots was 17.7° ± 11.4° (range -9.6° to 43.4°). Anterior maxillary roots presented the highest mean angle (25.8° ± 10.3°) that was significantly different from the mean angle in posterior maxillary roots (10.7° ± 9.4°; p < 0.001) and from the mean angle in posterior mandibular roots (15.1 ± 9.8°; p < 0.05). In roots with a shallow resection angle (≤20°), the rate of healed cases was higher than in roots with an acute resection angle (>20°), however without reaching statistical significance (p = 0.0905). Angles did not correlate either with the surgical depth or with the retrofilling length. CONCLUSIONS: Statistically significant differences were observed comparing resection angles of different tooth groups. However, the angle had no significant effect on treatment outcome. CLINICAL RELEVANCE: Contrary to common belief, the resection angle in maxillary anterior teeth was greater than in the other teeth. The surgeon is advised to pay attention to the resection angle when bevelling maxillary anterior teeth in apical surgery.

Effect of Nd: YAG laser on the apical seal after root-end resection and MTA retrofill: a bacterial leakage study.

Laser irradiation has been investigated in terms of preventing leakage in retrofilled root canals. The aim of the present study was to evaluate the effect of neodymium-doped yttrium aluminum garnet (Nd: YAG) laser on the bacterial leakage of mineral trioxide aggregate (MTA)-retrofilled roots. In this ex vivo experimental study, 90 single-rooted incisor teeth were filled with gutta-percha and AH26 sealer. The apical 3 mm of all the roots were resected and 3-mm retrocavities were prepared by an ultrasonic device. The specimens were randomly divided into two experimental (n = 25), one positive control (n = 10), and two negative control (n = 10) groups. In the laser + MTA group, the cavity walls were irradiated by Nd: YAG laser prior to MTA placement. In the MTA group, MTA was placed without laser irradiation. The root surfaces were covered with two layers of nail varnish except for the apical 2 mm. The specimens were then embedded in a bacterial leakage test system and examined daily for 90 days. Contamination periods were recorded. Data were analyzed by Kaplan-Meier and Mann-Whitney U tests (α = 0.05). Five teeth with and five teeth without laser irradiation underwent scanning electron microscopic evaluation. The specimens in the laser + MTA group were contaminated earlier than those in the MTA group (p < 0.05). Comparison of survival times between the two groups showed significant differences (p < 0.05). Nd: YAG laser irradiation can decrease the sealing capacity of MTA in comparison to the apical seal achieved by MTA without laser irradiation. Further studies are recommended to provide a better seal for the MTA-retrofilled teeth after laser irradiation.

Orthodontic treatment of a mandibular incisor fenestration resulting from a broken retainer.

This article describes the orthodontic relapse with mandibular incisor fenestration in a 36-year-old man who had undergone orthodontic treatment 21 years previously. The patient reported that his mandibular 3 × 3 bonded retainer had been partially debonded and broken 4 years earlier. The mandibular left lateral incisor remained bonded to the retainer and received the entire load of the incisors; consequently, there was extreme labial movement of the root, resulting in dental avulsion. As part of the treatment, the root was repositioned lingually using a titanium-molybdenum segmented archwire for 8 months, followed by endodontic treatment, an apicoectomy, and 4 months of alignment and leveling of both arches. The treatment outcomes were excellent, and the tooth remained stable, with good integrity of the mesial, distal, and lingual alveolar bones and periodontal ligament. The 1-year follow-up showed good stability of the results.

Dye leakage and modification of fast-setting mineral trioxide aggregate.

The objective of this investigation was to determine and decrease dye leakage of fast-setting mineral trioxide aggregate (FSMTA). Specimens using differing setting times or concentrations of calcium sulfate modified FSMTA were assessed for dye penetration. Based on the results, no statistical difference was found in the dye leakage of FSMTA compared with regular mineral trioxide aggregate (MTA). The addition of 10 percent calcium sulfate resulted in a statistical reduction in dye leakage compared to both unmodified FSMTA and regular MTA.

Multidisciplinary Treatment of a Fenestration-type Defect.

The case report aimed at treating a fenestration-type defect with multidisciplinary conventional and advanced surgical techniques. Fenestrations are isolated areas in which the exposed root surface is covered only by the periosteum and gingiva, but the remaining cortical bone remains intact. Root coverage is indicated in cases of root hypersensitivity, treatment of shallow caries lesions, cervical abrasions, and esthetic and cosmetic needs. In this case report, after proper hygiene instruction and dental biofilm control, a fenestration-type defect was treated using guided tissue regeneration (anorganic bovine matrix and resorbable membrane) and a connective tissue grafts, associated to an endodontic apicoectomy. After reevaluation, the remaining gingival recession was treated with a second gingival connective tissue graft covered with q double papillae type in order to reconstruct the periodontal tissues of the involved tooth. In this clinical case, the interaction between the different areas of dentistry has made it possible to correct a fenestration-type defect, following procedures based on scientific evidence, restoring periodontal health, esthetics, self-esteem, and meeting the patient's expectations regarding her initial complaint. This case report shows the important role of interdisciplinary approach to treating a patient with a complex periodontal defect that required different types of knowledge and abilities to achieve the best results based on the current status of dentistry possibilities.

Adhesive Approach Using Internal Coping for Vertical Root Fractured Teeth with Flared Root Canals.

Vertical root fractures are often observed in teeth with endodontic treatment and post space preparation. Frequently, because such teeth have flared root canals with thin dentin walls, conventional treatments are disadvantageous in terms of adhesiveness, sealability and risk of refracture. Here we devised an intentional replantation method that uses internal resin coping, with a reinforcing effect on thin root canal dentin. In two patients treated with this method, satisfactory conditions have been maintained. This report suggests that an intentional replantation method in which an internal resin coping is employed may be a useful therapy for fractured teeth with flared root canals.

Assessment of root surfaces of apicected teeth: a scanning electron microscopy evaluation.

OBJECTIVES: The aim of this study was to determine the apical surface characteristics and presence of dental cracks in single-rooted premolars, resected 3.0 mm from the root apex, using the Er: YAG laser, tungsten carbide bur, and diamond-coated tip, by scanning electron microscopy (SEM). EXPERIMENTAL DESIGN: Thirty single-rooted premolar teeth were collected. The instrumented and obturated teeth were divided into three groups according to the root resection method (2.94 µm, 100 mj, 20-Hz Er: YAG laser, plain tapered fissure tungsten carbide bur at a low speed of 40,000 rpm, or a diamond-coated SG6D tip coupled to the handpiece of a conventional ultrasound device). The specimens were prepared for SEM and analyzed by the Kruskal-Wallis and Mann-Whitney statistical tests. RESULTS: The SEM images showed that tungsten carbide burs produced significantly smoother resected root surfaces than the diamond-coated tip. There was no statistically significant difference between the Er: YAG and tungsten carbide bur groups. The analysis of scores obtained for the cut quality by the Kruskal-Wallis test revealed no significant differences among the groups. In our study, five teeth had no cracks after the apical resection. The mean number of cracks per tooth was 3.5 ± 1.780 (Er: YAG laser group), 2.5 ± 1.716 (tungsten carbide bur group), and 4.5 ± 2.593 (diamond-coated tip group). CONCLUSIONS: Under the tested conditions smoother surfaces were observed in the groups treated with the tungsten carbide bur and Er: YAG laser when compared with the diamond-coated tips.