Water-responsive supercontractile polymer films for bioelectronic interfaces.

Connecting different electronic devices is usually straightforward because they have paired, standardized interfaces, in which the shapes and sizes match each other perfectly. Tissue-electronics interfaces, however, cannot be standardized, because tissues are soft1-3 and have arbitrary shapes and sizes4-6. Shape-adaptive wrapping and covering around irregularly sized and shaped objects have been achieved using heat-shrink films because they can contract largely and rapidly when heated7. However, these materials are unsuitable for biological applications because they are usually much harder than tissues and contract at temperatures higher than 90 °C (refs. 8,9). Therefore, it is challenging to prepare stimuli-responsive films with large and rapid contractions for which the stimuli and mechanical properties are compatible with vulnerable tissues and electronic integration processes. Here, inspired by spider silk10-12, we designed water-responsive supercontractile polymer films composed of poly(ethylene oxide) and poly(ethylene glycol)-α-cyclodextrin inclusion complex, which are initially dry, flexible and stable under ambient conditions, contract by more than 50% of their original length within seconds (about 30% per second) after wetting and become soft (about 100 kPa) and stretchable (around 600%) hydrogel thin films thereafter. This supercontraction is attributed to the aligned microporous hierarchical structures of the films, which also facilitate electronic integration. We used this film to fabricate shape-adaptive electrode arrays that simplify the implantation procedure through supercontraction and conformally wrap around nerves, muscles and hearts of different sizes when wetted for in vivo nerve stimulation and electrophysiological signal recording. This study demonstrates that this water-responsive material can play an important part in shaping the next-generation tissue-electronics interfaces as well as broadening the biomedical application of shape-adaptive materials.

Pharmacists' Perceptions of the Benefits and Challenges of Electronic Product Information System Implementation in Hong Kong: Mixed-Method Study.

BACKGROUND: With the advancement of technology, more countries are now adopting the use of electronic product information (ePI), which refer to an electronic version of physical product inserts in a semistructured format optimized for electronic manipulation. The successful implementation of ePI has led to advantages and convenience to patients, health care professionals, and pharmaceutical companies in many regions and countries. In the Hong Kong Special Administrative Region (SAR), there is currently no citywide implementation of ePI. The SAR exhibits conditions that would favor the implementation of an ePI system, as well as existing barriers hindering its implementation. However, no study has been performed to examine the specific situation in Hong Kong. OBJECTIVE: The objective of this study is to explore working pharmacists' overall perception of ePI and to identify potential challenges to the implementation of an ePI system in Hong Kong. METHODS: This mixed-method study involved a structured survey and interview with practicing pharmacists in Hong Kong. Pharmacists were eligible if they were licensed to practice in Hong Kong, and currently working locally in any pharmacy-related sectors and institutions. Respondents completed a survey to indicate their level of agreement with statements regarding the potential advantages of ePI over paper PI. A structured interview was conducted to gather respondents' perceived advantages of ePI over paper PI in different aspects, such as professionalism, usability, presentation, and environment, as well as challenges of citywide ePI implementation in Hong Kong. Thematic analysis was adopted to analyze the qualitative data. Grounded theory was used to generate themes and identify specific outcomes. RESULTS: A total of 16 pharmacists were recruited, comprising 4 community pharmacists, 5 hospital pharmacists, and 7 industrial pharmacists. All of them used electronic platforms at least once per month on average. Respondents identified many flaws in physical package inserts that can potentially be mitigated using ePI. The speed with which drug information can be retrieved and the degree to which the drug information can be readily updated and disseminated were considered the greatest strengths of ePI. The clarity with which ePI present drug information to patients was considered as the weakest aspect of ePI. Many respondents highlighted concerns about the security risks and high cost associated with system maintenance and that certain subpopulations may not be sufficiently computer literate to navigate the ePI system. Respondents also voiced many concerns about the implementation and maintenance of a local ePI system. CONCLUSIONS: We conclude that an ePI system is generally supported by pharmacists but concerns about implementation process and maintenance of the system has been raised. The perceived benefits of ePI gathered from this study, as well as collective evidence from other countries with mature ePI systems, confirm that more efforts should be made to promote optimized development and implementation of an ePI system in Hong Kong.

Peripherally Metalated Porphyrins with Applications in Catalysis, Molecular Electronics and Biomedicine.

Porphyrins are conjugated, stable chromophores with a central core that binds a variety of metal ions and an easily functionalized peripheral framework. By combining the catalytic, electronic or cytotoxic properties of selected transition metal complexes with the binding and electronic properties of porphyrins, enhanced characteristics of the ensemble are generated. This review article focuses on porphyrins bearing one or more peripheral transition metal complexes and discusses their potential applications in catalysis or biomedicine. Modulation of the electronic properties and intramolecular communication through coordination bond linkages in bis-porphyrin scaffolds is also presented.

Organic Bioelectronics: Bridging the Signaling Gap between Biology and Technology.

The electronics surrounding us in our daily lives rely almost exclusively on electrons as the dominant charge carrier. In stark contrast, biological systems rarely use electrons but rather use ions and molecules of varying size. Due to the unique combination of both electronic and ionic/molecular conductivity in conducting and semiconducting organic polymers and small molecules, these materials have emerged in recent decades as excellent tools for translating signals between these two realms and, therefore, providing a means to effectively interface biology with conventional electronics-thus, the field of organic bioelectronics. Today, organic bioelectronics defines a generic platform with unprecedented biological recording and regulation tools and is maturing toward applications ranging from life sciences to the clinic. In this Review, we introduce the field, from its early breakthroughs to its current results and future challenges.

Direct transfer of graphene onto flexible substrates.

In this paper we explore the direct transfer via lamination of chemical vapor deposition graphene onto different flexible substrates. The transfer method investigated here is fast, simple, and does not require an intermediate transfer membrane, such as polymethylmethacrylate, which needs to be removed afterward. Various substrates of general interest in research and industry were studied in this work, including polytetrafluoroethylene filter membranes, PVC, cellulose nitrate/cellulose acetate filter membranes, polycarbonate, paraffin, polyethylene terephthalate, paper, and cloth. By comparing the properties of these substrates, two critical factors to ensure a successful transfer on bare substrates were identified: the substrate's hydrophobicity and good contact between the substrate and graphene. For substrates that do not satisfy those requirements, polymethylmethacrylate can be used as a surface modifier or glue to ensure successful transfer. Our results can be applied to facilitate current processes and open up directions for applications of chemical vapor deposition graphene on flexible substrates. A broad range of applications can be envisioned, including fabrication of graphene devices for opto/organic electronics, graphene membranes for gas/liquid separation, and ubiquitous electronics with graphene.

Compact ultra wide band microstrip bandpass filter based on multiple-mode resonator and modified complementary split ring resonator.

A new class of broadband microstrip filters for Ultra Wide Band (UWB) applications is proposed. In the design, different stages of parallel-coupled microstrip line and other stages with a Modified Complementary Split Ring Resonator (MCSRR)-a concept proposed here for the first time-are adjusted to obtain the desired response with broadband, sharp rejection, low insertion loss, and low return loss. Full wave simulation results as well as measurement results from fabricated prototypes are presented, showing good agreement. The proposed technique offers a new alternative to implement low-cost high-performance filter devices, applicable to a wide range of communication systems.

Moore's Law revisited through Intel chip density.

Gordon Moore famously observed that the number of transistors in state-of-the-art integrated circuits (units per chip) increases exponentially, doubling every 12-24 months. Analysts have debated whether simple exponential growth describes the dynamics of computer processor evolution. We note that the increase encompasses two related phenomena, integration of larger numbers of transistors and transistor miniaturization. Growth in the number of transistors per unit area, or chip density, allows examination of the evolution with a single measure. Density of Intel processors between 1959 and 2013 are consistent with a biphasic sigmoidal curve with characteristic times of 9.5 years. During each stage, transistor density increased at least tenfold within approximately six years, followed by at least three years with negligible growth rates. The six waves of transistor density increase account for and give insight into the underlying processes driving advances in processor manufacturing and point to future limits that might be overcome.

Intrinsically Conductive Microbial Nanowires for 'Green' Electronics with Novel Functions.

Intrinsically conductive protein nanowires, microbially produced from inexpensive, renewable feedstocks, are a sustainable alternative to traditional nanowire electronic materials, which require high energy inputs and hazardous conditions/chemicals for fabrication and can be highly toxic. Pilin-based nanowires can be tailored for specific functions via the design of synthetic pilin genes to tune wire conductivity or introduce novel functionalities. Other microbially produced nanowire options for electronics may include cytochrome wires, curli fibers, and the conductive fibers of cable bacteria. Proof-of-concept protein nanowire electronics that have been successfully demonstrated include biomedical sensors, neuromorphic devices, and a device that generates electricity from ambient humidity. Further development of applications will require interdisciplinary teams of engineers, biophysicists, and synthetic biologists.

Use of live interactive webcasting for an international postgraduate module in ehealth: case study evaluation.

BACKGROUND: Producing "traditional" e-learning can be time consuming, and in a topic such as eHealth, it may have a short shelf-life. Students sometimes report feeling isolated and lacking in motivation. Synchronous methods can play an important part in any blended approach to learning. OBJECTIVE: The aim was to develop, deliver, and evaluate an international postgraduate module in eHealth using live interactive webcasting. METHODS: We developed a hybrid solution for live interactive webcasting using a scan converter, mixer, and digitizer, and video server to embed a presenter-controlled talking head or copy of the presenter's computer screen (normally a PowerPoint slide) in a student chat room. We recruited 16 students from six countries and ran weekly 2.5-hour live sessions for 10 weeks. The content included the use of computers by patients, patient access to records, different forms of e-learning for patients and professionals, research methods in eHealth, geographic information systems, and telehealth. All sessions were recorded-presentations as video files and the student interaction as text files. Students were sent an email questionnaire of mostly open questions seeking their views of this form of learning. Responses were collated and anonymized by a colleague who was not part of the teaching team. RESULTS: Sessions were generally very interactive, with most students participating actively in breakout or full-class discussions. In a typical 2.5-hour session, students posted about 50 messages each. Two students did not complete all sessions; one withdrew from the pressure of work after session 6, and one from illness after session 7. Fourteen of the 16 responded to the feedback questionnaire. Most students (12/14) found the module useful or very useful, and all would recommend the module to others. All liked the method of delivery, in particular the interactivity, the variety of students, and the "closeness" of the group. Most (11/14) felt "connected" with the other students on the course. Many students (11/14) had previous experience with asynchronous e-learning, two as teachers; 12/14 students suggested advantages of synchronous methods, mostly associated with the interaction and feedback from teachers and peers. CONCLUSIONS: This model of synchronous e-learning based on interactive live webcasting was a successful method of delivering an international postgraduate module. Students found it engaging over a 10-week course. Although this is a small study, given that synchronous methods such as interactive webcasting are a much easier transition for lecturers used to face-to-face teaching than are asynchronous methods, they should be considered as part of the blend of e-learning methods. Further research and development is needed on interfaces and methods that are robust and accessible, on the most appropriate blend of synchronous and asynchronous work for different student groups, and on learning outcomes and effectiveness.

Hybrid carbon nanostructured fibers: stepping stone for intelligent textile-based electronics.

The journey of smart textile-based wearable technologies first started with the attachment of sensors to fabrics, followed by embedding sensors in apparels. Presently, garments themselves can be transformed into sensors, which demonstrates the tremendous growth in the field of smart textiles. Wearable applications demand flexible materials that can withstand deformation for their practical use on par with conventional textiles. To address this, we explore the potential reasons for the enhanced performance of wearable devices realized from the fabrication of carbon nanostructured fibers with the use of graphene, carbon nanotubes and other two-dimensional materials. This review presents a brief introduction on the fabrication strategies to form carbon-based fibers and the relationship between their properties and characteristics of the resulting materials. The likely mechanisms of fiber-based electronic and storage devices, focusing mainly on transistors, nano-generators, solar cells, supercapacitors, batteries, sensors and therapeutic devices are also presented. Finally, the future perspectives of this research field of flexible and wearable electronics are discussed. The present study supplements novel ideas not only for beginners aiming to work in this booming area, but also for researchers actively engaged in the field of fiber-based electronics, dealing with advanced electronics and wide range of functionalities integrated into textile fibers.

[The role of electronic techniques for advanced neuroelectrophysiology].

The rapid development in the fields of electroscience, computer science, and biomedical engineering are propelling the electrophysiologyical techniques. Recent technological advances have made it possible to simultaneously record the activity of large numbers of neurons in awake and behaving animals using implanted extracellular electrodes. Several laboratories use chronically implanted electrode arrays in freely moving animals because they allow stable recordings of discriminated single neurons and/or field potentials from up to hundreds of electrodes over long time periods. In this review, we focus on the new technologies for neuroelectrophysiology.

Integrated electronic detection of biomolecules.

Electronics offers several unique opportunities for the detection and characterization of biomolecules such as oligonucleotides and proteins. Solid-state microfabrication technology, similar to that used to make integrated circuits, can be employed to make integrated electronic sensing systems that are capable of simultaneously detecting multiple molecules. Here, we review some of the capabilities afforded by electronics for rapid and sensitive detection of biomolecules and discuss a recent demonstration of a multi-marker electronic sensing system for detection of uropathogens in clinical samples.

"Smart dust": nanostructured devices in a grain of sand.

The term "smart dust" originally referred to miniature wireless semiconductor devices made using fabrication techniques derived from the microelectronics industry. These devices incorporate sensing, computing and communications in a centimetre-sized package. This article discusses the construction of much smaller silicon-based systems, using the tools of nanotechnology. The synthesis of millimetre- to micron-sized functional photonic crystals made from porous silicon is described. It is shown how the various optical, chemical, and mechanical properties can be harnessed to perform sensing, signal processing, communication and motive functions.

[Trends of electronic publishing in medicine and life sciences].

Scientific publication in the electronic media is gaining popularity in academic libraries, research institutions and commercial organizations. The electronic journal may shorten the processes of writing and publication, decrease publication and distribution costs, and enable access from any location in the world. Electronic publications have unique advantages: it is possible to search them, to create hyperlinks to references and footnotes, as well as to information on the web and to include graphics and photographs at a very low cost. Audio, video and tri-dimensional images may also be included. Electronic publishing may also speed up review and publication processes and enable the writer to receive immediate feedback through the web. However, in spite of the advantages, there are certain points that must be considered: accessibility to previously published material is not guaranteed as databases are not always stable and coverage may change without notice. In addition, the price that commercial publishers charge for their services may be very high or be subject to the purchase of a packaged deal that may include unwanted databases. Many issues of copyright and the use of published material are not yet finalized. In this review we discuss the advantages and disadvantages of the electronic scientific publication, the feasibility of keeping appropriate quality and peer-review process, the stability and accessibility of databases managed by the publishers and the acceptance of the electronic format by scientists and clinicians.