Biopharmaceutical characterization of a novel sustained-release formulation of allopurinol with reduced nephrotoxicity.

The present study was aimed to develop a novel sustained-release formulation for allopurinol (ALP/SR) with the use of a pH-sensitive polymer, hydroxypropyl methylcellulose acetate succinate, to reduce nephrotoxicity. ALP/SR was evaluated in terms of crystallinity, the dissolution profile, pharmacokinetic behavior, and nephrotoxicity in a rat model of nephropathy. Under acidic conditions (pH1.2), sustained release behavior was seen for ALP/SR, although both crystalline ALP and ALP/SR exhibited rapid dissolution at neutral condition. After multiple oral administrations of ALP samples (10 mg-ALP/kg) for 4 days in a rat model of nephropathy, ALP/SR led to a low and sustained plasma concentration of ALP, as evidenced by half the maximum concentration of ALP and a 2.5-fold increase in the half-life of ALP compared with crystalline ALP, possibly due to suppressed dissolution behavior under acidic conditions. Repeated-dosing of ALP/SR resulted in significant reductions in plasma creatinine and blood urea nitrogen levels by 73% and 69%, respectively, in comparison with crystalline ALP, suggesting the low nephrotoxic risk of ALP/SR. From these findings, a strategic SR formulation approach might be an efficacious dosage option for ALP to avoid severe nephrotoxicity in patients with nephropathy.

Preparation and Characterization of a Lutein Solid Dispersion to Improve Its Solubility and Stability.

Lutein has been used as a dietary supplement for the treatment of eye diseases, especially age-related macular degeneration. For oral formulations, we investigated lutein stability in artificial set-ups mimicking different physiological conditions and found that lutein was degraded over time under acidic conditions. To enhance the stability of lutein upon oral intake, we developed enteric-coated lutein solid dispersions (SD) by applying a polymer, hydroxypropyl methylcellulose acetate succinate (HPMCAS-LF), through a solvent-controlled precipitation method. The SD were characterized in crystallinity, morphology, and drug entrapment. In the dissolution profile of lutein SD, a F80 formulation showed resistance toward the acidic environment under simulated gastric conditions while exhibiting a bursting drug release under simulated intestinal conditions. Our results highlight the potential use of HPMCAS-LF as an effective matrix to enhance lutein bioavailability during oral delivery and to provide novel insights into the eye-care supplement industry, with direct benefits for the health of patients.

Correlation between the viscoelastic properties of the gel layer of swollen HPMC matrix tablets and their in vitro drug release.

Drug release from hydroxypropyl methylcellulose (HPMC) hydrophilic matrix tablets is controlled by drug diffusion through the gel layer of the matrix-forming polymer upon hydration, matrix erosion or combination of diffusion and erosion mechanisms. In this study, the relationship between viscoelastic properties of the gel layer of swollen intact matrix tablets and drug release was investigated. Two sets of quetiapine fumarate (QF) matrix tablets were prepared using the high viscosity grade HPMC K4M at low (70 mg/tablet) and high (170 mg/tablet) polymer concentrations. Viscoelastic studies using a controlled stress rheometer were performed on swollen matrices following hydration in the dissolution medium for predetermined time intervals. The gel layer of swollen tablets exhibited predominantly elastic behavior. Results from the in vitro release study showed that drug release was strongly influenced by the viscoelastic properties of the gel layer of K4M tablets, which was further corroborated by results from water uptake studies conducted on intact tablets. The results provide evidence that the viscoelastic properties of the gel layer can be exploited to guide the selection of an appropriate matrix-forming polymer, to better understand the rate of drug release from matrix tablets in vitro and to develop hydrophilic controlled-release formulations.

Influence of Polymers on the Physical and Chemical Stability of Spray-dried Amorphous Solid Dispersion: Dipyridamole Degradation Induced by Enteric Polymers.

Amorphous solid dispersions (ASDs) are inherently unstable because of high internal energy. Evaluating physical and chemical stability during the process and storage is essential. Numerous researches have demonstrated how polymers influence the drug precipitation and physical stability of ASDs, while the influence of polymers on the chemical stability of ASDs is often overlooked. Therefore, this study aimed to investigate the effect of polymers on the physical and chemical stability of spray-dried ASDs using dipyridamole (DP) as a model drug. Proper polymers were selected by assessing their abilities to inhibit drug recrystallization in supersaturated solutions. HPMC E5, Soluplus®, HPMCP-55, and HPMCAS-LP were shown to be effective stabilizers. The optimized formulations were further stored at a high temperature (60 °C) and high humidity (40 °C, 75% RH) for 2 months, and their physical and chemical stability was evaluated using polarizing optical microscopy, FTIR, HPLC, and mass spectrometry (MS). In general, crystallization was observed in all samples, which indicated the physical instability under stressed storage conditions. Also, it was noted that the polymers in ASDs rather than physical mixtures, induced a dramatic drug degradation after being exposed to a high temperature (HPMCP-55 > 80% and HPMCAS-LP > 50%) and high humidity (HPMCP-55 > 40% and HPMCAS-LP > 10%). The MS analysis further confirmed the degradation products, which might be generated from the reaction between dipyridamole and phthalic anhydride decomposed from HPMCP-55 and HPMCAS-LP. Overall, the exposure of ASDs to stressed conditions resulted in recrystallization and even the chemical degradation induced by polymers.

The effect of HPMC particle size on the drug release rate and the percolation threshold in extended-release mini-tablets.

The particle size of HPMC is a critical factor that can influence drug release rate from hydrophilic matrix systems. Percolation theory is a statistical tool which is used to study the disorder of particles in a lattice of a sample. The percolation threshold is the point at which a component is dominant in a cluster resulting in significant changes in drug release rates. Mini-tablets are compact dosage forms of 1.5-4 mm diameter, which have potential benefits in the delivery of drug to some patient groups such as pediatrics. In this study, the effect of HPMC particle size on hydrocortisone release and its associated percolation threshold for mini-tablets and tablets was assessed. For both mini-tablets and tablets, large polymer particles reduced tensile strength, but increased the drug release rate and the percolation threshold. Upon hydration, compacts with 45-125 µm HPMC particles formed a strong gel layer with low porosity, reducing hydrocortisone release rates. In comparison, faster drug release rates were obtained when 125-355 µm HPMC particles were used, due to the greater pore sizes that resulted in the formation of a weaker gel. Using 125-355 µm HPMC particles increased the percolation threshold for tablets and to a greater extent for mini-tablets. This work has demonstrated the importance of HPMC particle size in ER matrices, the effects of which are even more obvious for mini-tablets.

Formulation of bi-layer matrix tablets of tramadol hydrochloride: Comparison of rate retarding ability of the incorporated hydrophilic polymers.

Bi-layer tablets of tramadol hydrochloride were prepared by direct compression technique. Each tablet contains an instant release layer with a sustained release layer. The instant release layer was found to release the initial dose immediately within minutes. The instant release layer was combined with sustained release matrix made of varying quantity of Methocel K4M, Methocel K15MCR and Carbomer 974P. Bi-layer tablets were evaluated for various physical tests including weight variation, thickness and diameter, hardness and percent friability. Drug release from bi-layer tablet was studied in acidic medium and buffer medium for two and six hours respectively. Sustained release of tramadol hydrochloride was observed with a controlled fashion that was characteristic to the type and extent of polymer used. % Drug release from eight-hour dissolution study was fitted with several kinetic models. Mean dissolution time (MDT) and fractional dissolution values (T25%, T50% and T80%) were also calculated as well, to compare the retarding ability of the polymers. Methocel K15MCR was found to be the most effective in rate retardation of freely water-soluble tramadol hydrochloride compared to Methocel K4M and Capbomer 974P, when incorporated at equal ratio in the formulation.

Study the effect of formulation variables on drug release from hydrophilic matrix tablets of milnacipran and prediction of in-vivo plasma profile.

The objective of this study was to design oral controlled release (CR) matrix tablets of Milnacipran using hydroxypropyl methylcellulose (HPMC) as the retardant polymer and to study the effect of various formulation factors such as polymer proportion, polymer viscosity, compression force and also the pH of dissolution medium on the in-vitro release of drug. Two viscosity grade of HPMC (15 K and 100 K) were used in the proportion of 50, 100, 150 and 200 mg per CR tablet. In-vitro release rate was characterized using various model dependent approaches and model independent dissolution parameters [T50% and T80% dissolution time, mean dissolution time (MDT), mean residence time (MRT), dissolution efficiency (DE)]. The statistical analysis was performed on all the model independent approaches using student t test and ANOVA. Results were found that as polymer concentration (50 mg to 200 mg) and viscosity (15 K to 100 K) increases, the MDT, MRT, T50% and T80% extended significantly. Drug release rate was found to be significantly different at different hardness. In-vivo human plasma concentration--time profile was predicted from in-vitro release data using convolution method. Predicted human pharmacokinetic parameters shows that the design CR formulation has capability to sustained the plasma drug level of milnacipran.

Comparison of two encapsulated curcumin particular systems contained in different formulations with regard to in vitro skin penetration.

BACKGROUND: Curcumin is known for its anti-inflammatory, antioxidative, and anticarcinogenic properties. However, the strong lipophilic compound is not easily applicable, neither in water, nor directly in o/w formulations. So far, loading of nano or micro scaled carriers has enabled only an uptake up to 30% of curcumin. METHOD: In the present article, curcumin was successfully encapsulated into two different safe and inexpensive polymers, ethyl cellulose and methyl cellulose blended ethyl cellulose with a loading capacity of ~ 46-48%. In addition, the in vitro skin penetration of the two curcumin encapsulated particular systems, which were applied each in three different formulations, an o/w, w/o lotion, and water suspension, was investigated on porcine ear skin using Laser scanning microscopy. RESULTS: It was found that in comparison to water suspensions, o/w and w/o lotions enhanced, especially the follicular penetration of the encapsulated curcumin particles into porcine skin, whereas the w/o enhanced the penetration better than the o/w lotion. Furthermore, the application of ethyl cellulose blended with methyl cellulose improved the penetration of curcumin in all formulations. CONCLUSION: High loaded encapsulated curcumin systems, prepared from a simple and highly efficient encapsulation system can be used to transport curcumin effectively into the skin.

Pharmacokinetic and pharmacodynamic evaluation of the anti-cataract effect of eye drops containing disulfiram and low-substituted methylcellulose using ICR/f rats as a hereditary cataract model.

We attempted to develop anti-cataract eye drops using disulfiram (DSF) and low-substituted methylcellulose (MC), and evaluated their anti-cataract effect in terms of the lens opacification vs. age-profile curves using a one-exponential equation. The eye drops were prepared using 0.5% DSF and 2% MC (DSF eye drops), and ICR/f rats, a recessive-type hereditary cataractous strain, were used as the experimental model. Gelation of DSF eye drops containing MC was first observed at about 35°C, close to body temperature. In in vivo transcorneal penetration experiments using rabbit corneas, only diethyldithiocarbamate (DDC) was detected in the aqueous humor, while DSF was not detected. The DDC penetration level of DSF eye drops containing MC was approximately 1.3-fold higher than that of DSF eye drops. The opacification rate constant (k) of ICR/f rat instilled with DSF eye drops with or without MC was lower, and the initial time of opacification (τ) was longer than those of ICR/f rats instilled with saline. Furthermore, the k of ICR/f rats instilled with DSF eye drops with MC was lower than that of ICR/f rats instilled with DSF eye drops without MC. In conclusion, the analysis of kinetic parameters including k and τ using a one-exponential equation provided useful information for clarifying the anti-cataract effect of eye drops. ICR/f rats instilled with DSF eye drops using a low-substituted MC-based drug delivery system demonstrated a delay in cataract development, probably resulting from an increase in the retention of DSF eye drops on the cornea.

Development of controlled-release matrix tablet of risperidone: influence of Methocel®- and Ethocel®-based novel polymeric blend on in vitro drug release and bioavailability.

Controlled-release (CR) matrix tablet of 4 mg risperidone was developed using flow bound dry granulation-slugging method to improve its safety profile and compliance. Model formulations F1, F2, and F3, consisting of distinct blends of Methocel® K100 LV-CR and Ethocel® standard 7FP premium, were slugged. Each batch of granules (250-1,000 µm), obtained by crushing the slugs, was divided into three portions after lubrication and then compressed to 9-, 12-, and 15-kg hard tablets. In vitro drug release studies were carried out in 0.1 N HCl (pH 1.2) and phosphate buffer (pH 6.8) using a paddle dissolution apparatus run at 50 rpm. The CR test tablet, containing 30% Methocel® and 60% Ethocel® (F3) with 12-kg hardness, exhibited pH-independent zero-order release kinetics for 24 h. The drug release rate was inversely proportional to the content of Ethocel®, while the gel layer formed of Methocel® helped in maintaining the integrity of the matrix. Changes in the hardness of tablet did not affect the release kinetics. The tablets were reproducible and stable for 6 months at 40 ± 2°C/75 ± 5% relative humidity. Risperidone and its active metabolite, 9-hydroxyrisperidone, present in the pooled rabbit's serum, were analyzed with HPLC-UV at λ(max) 280 nm. The CR test tablet exhibited bioequivalence to reference conventional tablet in addition to the significantly (p < 0.05) optimized peak concentration, C(max), and extended peak time, T (max), of the active moiety. There was a good association between drug absorption in vivo and drug release in vitro (R(2) = 0.7293). The successfully developed CR test tablet may be used for better therapeutic outcomes of risperidone.

Development of methylcellulose-based sustained-release dosage by semisolid extrusion additive manufacturing in drug delivery system.

The objective of this study is to fabricate customized dosage forms using extrusion-based 3D printing for the sustained delivery of theophylline. The therapeutic paste was prepared by combining various doses of theophylline (0, 75, 100, and 125 mg) with different concentrations of methylcellulose (MC) A4M (8, 10, and 12%). The paste was then 3D printed into semisolid tablets under optimized printing conditions. The rheological properties of printing pastes were related to the 3D printability. Our results indicated that to be 3D printed using the current platform, the storage modulus (G') of the printing paste should be higher than the loss modulus (G″) during the frequency sweep (0.1-600 rad/s), and the tan δ should fall in the range of 0.25-0.27 at 0.63 rad/s. The printed tablets formulated with 10% MC showed the highest overall quality, considering the aspects of resolution, texture, and shape retention regardless of the dosage. The scanning electron microscopy images indicated that the cross-linked structure of MC A4M formed the microscale porous microstructure, which has the potential to embed the theophylline, thus delayed the release through the barrier effect. The in vitro dissolution test revealed that the 3D printed tablets exhibited a sustained release during the first 12 hr. The findings in this study will support the development of customized, personalized medicine with improved efficacy.

Impact of co-administered stabilizers on the biopharmaceutical performance of regorafenib amorphous solid dispersions.

Poor solubility of drug candidates is a well-known and thoroughly studied challenge in the development of oral dosage forms. One important approach to tackle this challenge is the formulation as an amorphous solid dispersion (ASD). To reach the desired biopharmaceutical improvement a high supersaturation has to be reached quickly and then be conserved long enough for absorption to take place. In the presented study, various formulations of regorafenib have been produced and characterized in biorelevant in-vitro experiments. Povidone-based formulations, which are equivalent to the marketed product Stivarga®, showed a fast drug release but limited stability and robustness after that. In contrast, HPMCAS-based formulations exhibited excellent stability of the supersaturated solution, but unacceptably slow drug release. The attempt to combine the desired attributes of both formulations by producing a ternary ASD failed. Only co-administration of HPMCAS as an external stabilizer to the rapidly releasing Povidone-based ASDs led to the desired dissolution profile and high robustness. This optimized formulation was tested in a pharmacokinetic animal model using Wistar rats. Despite the promising in-vitro results, the new formulation did not perform better in the animal model. No differences in AUC could be detected when compared to the conventional (marketed) formulation. These data represent to first in-vivo study of the new concept of external stabilization of ASDs. Subsequent in-vitro studies revealed that temporary exposure of the ASD to gastric medium had a significant and long-lasting effect on the dissolution performance and externally administered stabilizer could not prevent this sufficiently. By applying the co-administered HPMCAS as an enteric coating onto Stivarga tablets, a new bi-functional approach was realized. This approach achieved the desired tailoring of the dissolution profile and high robustness against gastric medium as well as against seeding.

Kinetic studies of a composite carbon nanotube-hydrogel for tissue engineering by rheological methods.

Here we used rheological methods to study the gelation kinetics of silanized hydroxypropylmethylcellulose (HPMC-Si) hydrogel for tissue engineering. Firstly, the gelation time was determined from the independence of tan delta on frequency, and the Arrhenius law was applied to obtain the apparent activation energy of gelation, which was found to be about 109.0 kJ/mol. Secondly, the gelation process was monitored by measuring the sample storage modulus. The results showed that the gelation process could be well classified as a second-order reaction. In addition, a composite HPMC-Si/MWNTs hydrogel system for potential cartilage tissue engineering was investigated. The comparison of pure HPMC-Si hydrogel and composite HPMC-Si/MWNTs systems indicated that the addition of MWNTs could increase the mechanical strength of hydrogel without changing the gelation mechanism of the system.

An enhanced charge-driven intranasal delivery of nicardipine attenuates brain injury after intracerebral hemorrhage.

Intranasal drug delivery provided an alternative and effective approach for the intervention of an intracerebral hemorrhage (ICH). However, the short retention time at the absorption site and slow drug transport in intranasal gel influence the drug bioavailability and outcome of ICH. Herein, we fabricated a novel intranasal gel with oriented drug migration utilizing a charge-driven strategy to attenuate brain injury after ICH. Nicardipine hydrochloride (NCD) was entrapped in chitosan nanoparticles (CS NPs) and dispersed in an HAMC gel. Subsequently, one side of the gel was coated with a positively charged film. The oriented migration of CS NPs in the HAMC gel was determined, and the drug bioavailability was also enhanced. Furthermore, a blood-induced ICH rat model was established to evaluate the therapeutic effect of CS NPs + HAMC composites. Intranasal administration of the CS NPs + HAMC (+) composite showed a stronger neuroprotective effect in terms of brain edema reduction and neural apoptosis inhibition compared to the CS NPs + HAMC composite. These results suggested that the oriented and rapid drug transport from nose to brain can be achieved using the charge-driven strategy, and this intranasal drug delivery system has the potential to provide a new therapeutic strategy for the treatment of ICH.

Highly Soluble Drugs Directly Granulated by Water Dispersions of Insoluble Eudragit® Polymers as a Part of Hypromellose K100M Matrix Systems.

The aim of the present study was to investigate the suitability of insoluble Eudragit® water dispersions (NE, NM, RL, and RS) for direct high-shear granulation of very soluble levetiracetam in order to decrease its burst effect from HPMC K100M matrices. The process characteristics, ss-NMR analysis, in vitro dissolution behavior, drug release mechanism and kinetics, texture profile analysis of the gel layer, and PCA analysis were explored. An application of water dispersions directly on levetiracetam was feasible only in a multistep process. All prepared formulations exhibited a 12-hour sustained release profile characterized by a reduced burst effect in a concentration-dependent manner. No effect on swelling extent of HPMC K100M was observed in the presence of Eudragit®. Contrary, higher rigidity of formed gel layer was observed using combination of HPMC and Eudragit®. Not only the type and concentration of Eudragit®, but also the presence of the surfactant in water dispersions played a key role in the dissolution characteristics. The dissolution profile close to zero-order kinetic was achieved from the sample containing levetiracetam directly granulated by the water dispersion of Eudragit® NE (5% of solid polymer per tablet) with a relatively high amount of surfactant nonoxynol 100 (1.5%). The initial burst release of drug was reduced to 8.04% in 30 min (a 64.2% decrease) while the total amount of the released drug was retained (97.02%).

An integrated system for dissolution studies and magnetic resonance imaging of controlled release, polymer-based dosage forms-a tool for quantitative assessment of hydrogel formation processes.

Controlled release (CR) dosage forms are often based on polymeric matrices, e.g., sustained-release tablets and capsules. It is crucial to visualise and quantify processes of the hydrogel formation during the standard dissolution study. A method for imaging of CR, polymer-based dosage forms during dissolution study in vitro is presented. Imaging was performed in a non-invasive way by means of the magnetic resonance imaging (MRI). This study was designed to simulate in vivo conditions regarding temperature, volume, state and composition of dissolution media. Two formulations of hydrodynamically balanced systems (HBS) were chosen as model CR dosage forms. HBS release active substance in stomach while floating on the surface of the gastric content. Time evolutions of the diffusion region, hydrogel formation region and "dry core" region were obtained during a dissolution study of L-dopa as a model drug in two simulated gastric fluids (i.e. in fed and fasted state). This method seems to be a very promising tool for examining properties of new formulations of CR, polymer-based dosage forms or for comparison of generic and originator dosage forms before carrying out bioequivalence studies.

Dry coating of soft gelatin capsules with HPMCAS.

Dry coating is an innovative powder-layering technique that enables the formation of coatings on solid dosage forms with no need for using water or organic solvents. This technique envisages the distribution of polymer powder blends onto substrate cores and the concurrent or alternate nebulization of liquid plasticizers. In this work, a dry coating process based on hydroxypropyl methylcellulose acetate succinate (HPMCAS) was set up in a rotary fluid bed equipment to prepare enteric-coated soft gelatin capsules. Promising results were obtained in terms of process feasibility and product characteristics, thus suggesting the possibility of advantageous applications for the investigated technique when dealing with gelatin capsule substrates.

Using the internal stress concept to assess the importance of moisture sorption-induced swelling on the moisture transport through the glassy HPMC films.

The purpose of this research was to elucidate the significance of the changes in the mechanical and the volumetric properties on the moisture diffusivity through the polymer films. The internal stress concept was adapted and applied to estimate the relative impact of these property changes on the total stress experienced by a polymer film during storage. Hydroxypropyl Methylcellulose free films were used as a model material prepared at various conditions and stored at different relative humidities. The changes in the internal stress of these films due to the moisture sorption were studied. It was demonstrated that the stress-relaxation of the films increases at increasing moisture content. At the point when there is a definite loss of stress in the film, which is at moisture content higher than 6%, was shown to correlate with the significant increase of the moisture diffusivity. Further investigations revealed that the loss of stress is especially due to the swelling of the polymer rather than the changes in the inherent strain (the quotient between the tensile strength and the modulus of elasticity) of the HPMC films. This implies that the impact of the moisture sorption on the diffusivity is predominantly via volume addition rather than via altering the mechanical properties. Additionally, the approach presented here also brings up a new application of the internal stress concept, which in essence suggests the possibility to estimate the diffusion coefficient from the sorption isotherm and the mechanical analysis data.

Effect of a pharmaceutical cationic exchange resin on the properties of controlled release diphenhydramine hydrochloride matrices using Methocel K4M or Ethocel 7cP as matrix formers.

This work was aimed at evaluating the effect of a pharmaceutical cationic exchange resin (Amberlite IRP-69) on the properties of controlled release matrices using Methocel K4M (HPMC) or Ethocel 7cP (EC) as matrix formers. Diphenhydramine hydrochloride (DPH), which was cationic and water soluble, was chosen as a model drug. HPMC- and EC-based matrices with varying amounts (0-40%w/w) of resin incorporation were prepared by a direct compression. Matrix properties including diameter, thickness, hardness, friability, surface morphology and drug release were evaluated. The obtained matrices were comparable in diameter and thickness regardless of the amount of resin incorporation. Increasing the incorporated resin decreased the hardness of HPMC- and EC-based matrices, correlating with the degree of rupturing on the matrix surfaces. The friability of HPMC-based matrices increased with increasing the incorporated resin, corresponding to their decreased hardness. In contrast, the EC-based matrices showed no significant change in friability in spite of decreasing hardness. The incorporated resin differently influenced DPH release from HPMC- and EC-based matrices in deionized water. The resin further retarded DPH release from HPMC-based matrices due to the gelling property of HPMC and the ion exchange property of the resin. In contrast, the release from EC-based matrices initially increased because of the disintegrating property of the resin, but thereafter declined due to the complex formation between released drug and dispersed resin via the ion exchange process. The release in ionic solutions was also described. In conclusion, the incorporated resin could alter the release and physical properties of matrices.

Drug release from tableted wet granulations comprising cellulosic (HPMC or HPC) and hydrophobic component.

The effects of component nature, proportion and processing on the release rate and mechanism were investigated for tablets comprising drug, cellulosic polymer and hydrophobic components. Four drugs differing in solubility (diclofenac sodium, ibuprofen, naproxen and indomethacin), two cellulosic polymers (HPC and HPMC) and hydrophobic Emvelop were used in two levels of mass fraction and weight ratio of drug:carrier and of cellulosic-hydrophobic component. Compression was applied after granulation or physical mixing. Drug release was evaluated in pH 6.5 phosphate buffer BP and elucidation of the release mechanism was attempted by fitting kinetic models. Statistical significance of the effects of formulation variables on the release rate and mechanism expressed by the coefficient, k, and exponent, n, of the power law kinetic model, respectively, was evaluated by ANOVA. It was found that for the release mechanism most significant is the effect of drug solubility followed by cellulosic polymer type, mixing procedure and drug mass fraction. Significant interaction between drug solubility and type of cellulosic polymer indicated that alteration in the swelling of HPMC and HPC is caused by the drug solubility. Weight ratio of cellulosic-hydrophobic component does not affect the release mechanism, but only the release rate. Similarly, for the release rate most significant was found the effect of drug solubility, followed by cellulosic polymer type, weight ratio of cellulosic-hydrophobic component, mixing method and drug mass fraction. Also significant were the interactions of drug solubility with the type and proportion of the cellulosic polymer and the processing applied. Depending on the drug solubility and type of polymer present, wet granulation can increase or decrease the release rate.