Influence of Dissolution Vessel Geometry and Dissolution Medium on In Vitro Dissolution Behaviour of Triamterene-Coated Model Stents in Different Test Setups.

The aim of this study was to investigate if the geometry of the dissolution vessel, the dissolution medium volume and composition might contribute to the variation in drug release from drug-eluting stents (DES) in different test setups, which has been observed in previous in vitro studies. Therefore, DES containing triamterene as model substance were produced via fluidised-bed technology. Dissolution testing was carried out using different incubation setups, the reciprocating holder (USP Apparatus 7) and two flow-through methods, a method similar to the USP Apparatus 4 (FTC) and the vessel-simulating flow-through cell (vFTC) equipped with a hydrogel as a second compartment simulating the blood vessel wall. The results indicate that dissolution vessel geometry and medium volume had no influence on the release behaviour and only the flow-through cell methods yielded a lower dissolution rate than the incubation setups (80.6 ± 2.0% released in the FTC after 14 days compared to > 90% for all incubation setups). The composition of the hydrogel used in the vFTC also affected the dissolution rate (53.9 ± 4.5% within 14 days with a hydrogel based on phosphate-buffered saline compared to 78.2 ± 1.2% obtained with a hydrogel based on water) possibly due to different solubility of triamterene in the release media as well as interactions between the coating polymer and the release medium. Hence, the introduction of a hydrogel as a second compartment might lead to a more biorelevant test setup.

The delivery of triamterene by cucurbit[7]uril: synthesis, structures and pharmacokinetics study.

In recent years, cucurbit[7]uril (CB[7]) has attracted great attention in drug delivery. Though the effect of CB[7] in enhancing the solubility of water insoluble drugs has been validated, the underlying mechanism remains poorly understood, particularly at a molecular level. This study is designed to evaluate a CB[7]-based pharmaceutical formulation to improve solubility and bioavailability of triamterene (a mild potassium-sparing diuretic). Two polymorphs of triamterene@CB[7] were obtained, and their crystal structures were determined by single crystal X-ray diffraction. The CB[7] molecule forms a stable host-guest complex with triamterene (Ka = 1.69 ± 0.34 × 10(4) M(-1)) in aqueous solution (pH = 1.0). The results of dissolution study demonstrate that the apparent solubility value of triamterene@CB[7] complex in 0.1 M HCl is 1.6 times as large as that of triamterene, while free triamterene was released from triamterene@CB[7] complex in phosphate buffer of pH 6.8. Pharmacokinetic studies in rats reveal that the AUC0-∞ value of triamterene@CB[7] complex increases 2.8-fold compared with that of free triamterene, and t1/2 is prolonged from 1.42 to 2.61 h (P < 0.05) after oral administration. The increased solubility and oral bioavailability are attributed to the formation of a hydrophilic capsule composed of two CB[7] molecules, in which two insoluble triamterene molecules are encapsulated. These results demonstrate that triamterene@CB[7] complex is a stable and effective pharmaceutical formulation.

Bioequivalence evaluation of a triamterene-hydrochlorothiazide generic product: a new bioequivalence index for fixed-dose combinations.

In this study, an open, double-blind, randomized, two-period, two-group crossover design was conducted in 14 healthy volunteers to study the bioequivalence of a fixed-dose generic product. After administration of test or reference products to each volunteer, both active ingredients were determined simultaneously in plasma samples using a developed and validated HPLC-UV method, and pharmacokinetic parameters, including C(max), T(max), AUC(0-t) , AUC(0∞), terminal elimination rate constant (λz), volume of distribution in steady state (Vd(ss)), mean residence time (MRT), clearance (Cl), terminal elimination rate constant (Kel) were determined in each subject using the standard non-compartmental approach. Statistical comparison showed that the test and reference products were bioequivalent in terms of both the rate and extent of bioavailability of both active ingredients. Finally, a new parameter named range overlap index (ROI) was introduced for the first time in this study in order to judge about the overall bioequivalence of the combination products. This parameter indicates the extent in which the two CI90% ranges of each parameter for two active ingredients overlap with each other. The ROI is suggested to be equal or more than 50% for two combination products in order to be known as bioequivalent. The ROI values of the bioequivalence-indicating parameters were 61.90%, 84.6%, and 76.0% for C(max), AUC(0--->12), and AUC(0--->∞), respectively, which are indicative for bioequivalence in all the cases.

Evaluation of the suitability of a fluidized bed process for the coating of drug-eluting stents.

Drug-eluting stents are often coated using single-stent coating techniques. In pharmaceutical industry, single-tablet coating is unthinkable. Instead large batches of tablets are coated in fluidized bed apparatuses or pan coaters. Therefore, it was the aim of this work to evaluate whether stents can be coated using a fluidized bed process. For this purpose stents were coated with the model fluorescent drug triamterene embedded in ammonium methacrylate copolymer. Different stent lengths as well as different coating yields were assessed and also a drug-free topcoat was evaluated. The coated stents were analysed regarded coating layer mass, drug content, surface structure, coating thickness and drug release. Furthermore, coating yield and stent defect rate were examined. Except for one stent configuration good results were obtained without optimization of process parameters which indicates the suitability of the method to coat large amounts of stents simultaneously in principle. Drug release was tuneable over a wide range of time spans and a wide range of drug loadings was produced. Further work will be necessary to transform the results of this study from a model stent to a clinically relevant product.

Dose doubling, relative potency, and dose equivalence of potassium-sparing diuretics affecting blood pressure and serum potassium: systematic review and meta-analyses.

BACKGROUND: Potassium-sparing diuretics (PSDs) are valuable antihypertensives with additional benefits unrelated to control of systolic blood pressure (SBP). However, their key parameters affecting SBP and serum potassium are poorly defined, fostering underutilization. METHOD: Consequently, we conducted systematic reviews and meta-analyses, yielding 3668 articles and ultimately 84 randomized comparisons. RESULTS: For office SBP, overall placebo-adjusted changes were triamterene -1.9 (low dose only), amiloride -9.9, spironolactone -13.2, and eplerenone -9.2. Differences in antihypertensive effect were due to potency rather than efficacy. Doubling amiloride, eplerenone, and spironolactone doses reduced SBP (95% confidence limits) on average by -2.3 (-3.1, -1.5). Relative antihypertensive potencies were spironolactone>amiloride>eplerenone. Spironolactone had significantly greater antihypertensive potency than amiloride, -4.0 (-7.4, -0.6), and eplerenone, -5.5 (-7.4, -3.6). Dose equivalencies were eplerenone-spironolactone 4.5-to-1 (e.g., eplerenone 125∼spironolactone 25), amiloride-spironolactone 3.3-to-1, and eplerenone-amiloride 1.4-to-1. Increases in serum potassium from amiloride and spironolactone at commonly used doses averaged 0.14-0.29 mEq/l; the dose doubling effect was 0.16 (0.10, 0.22). Spironolactone caused greater hyperkalemia than amiloride across their dose ranges: 0.14, P = 0.043. Seven features make important bias unlikely: a comprehensive literature search, adjustment for covariates, all models explaining 95-100% of the between-study variability, similar dose doubling effects among PSDs, two different methods giving the same potency sequence, similar results from double blind comparisons, and similar results for eplerenone versus spironolactone from analysing direct comparison data (i.e., no meta-regression) for office and 24-h SBP. CONCLUSION: This synthesis accomplishes for PSDs what has already been achieved for thiazide-type diuretics and other antihypertensives and can guide the application of these underutilized medicines.

A comparison of the anti-hypertensive effectiveness of two triameterene/hydrochlorothiazide combinations: Maxzide versus Dyazide.

The hydrochlorothiazide component of Maxzide (Lederle Laboratories, Pearl River, NY) has been shown to be more bioavailable than the hydrochlorothiazide component of Dyazide (Smith, Kline and French Laboratories, Philadelphia, PA). The authors compared the antihypertensive effectiveness of a half-tablet of Maxzide (25 mg of hydrochlorothiazide and 37.5 mg of triamterene) to one capsule of Dyazide (25 mg of hydrochlorothiazide and 50 mg of triamterene) to determine if the difference in bioavailability would be reflected in differences in blood pressure control and metabolic changes. Thirty patients were studied in a randomized open-label crossover design study. There was a significant reduction in systolic blood pressure for both treatments although there was no difference in blood pressures at any time during the study between the two agents. There were no statistically significant differences between Maxzide and Dyazide in terms of metabolic changes for potassium, magnesium, glucose, cholesterol, triglycerides, uric acid, or calcium. Although the hydrochlorothiazide component of Maxzide is more bioavailable than that of Dyazide this did not translate into enhanced hypotensive efficacy.

Modeling of drug release from swellable polymers.

The water Swelling and drug diffusion from initially hydrophilic, glassy polymer matrices were modeled using concentration-dependent diffusion equations for water and drug. The transport equation for water incorporated a relaxation-dependent mechanism. These equations were solved with an appropriate boundary condition incorporating a relaxation-dependent Deborah number. Experimental results from drug release from PVA and PHEMA samples were used to determine the validity of the model.

The application of solid dispersion technique with D-mannitol to the improvement in oral absorption of triamterene.

Present paper proposes a new system to administer triamterene, a sparing potassium diuretic which presents absorption problems when administered as a free powder, due to its low solubility in water. To increase the dissolution rate and subsequent oral bioavailability of this drug, it has been formulated as solid dispersion. This method involves preparation by the melting carrier method using D-mannitol as matrix. These systems were subjected to USP XXII dissolution rate determination. The results revealed a marked dissolution rate increase of included triamterene in solid dispersions when compared with micronized drug. Further in vivo assays have demonstrated the absorption efficiency for the proposed systems when referred to pure drug. In vitro-in vivo correlation between the parameter T80% (from dissolution rate studies) and the pharmacokinetic one Ke, has found to be acceptable. All the results obtained make this system suited for further formulation in the pharmaceutical industry.

Kinetic modeling of triamterene intestinal absorption and its inhibition by folic acid and methotrexate.

The aim of this work was to study the intestinal absorption process of triamterene in situ in rats in order to gain insight on its absorption mechanism. The study shows an example of application of a pharmacokinetic model for drug disappearance from a compartment by simultaneous first order and Michaelis-Menten processes to the intestinal drug disappearance by absorption in a non-steady state system. The parameter used to quantify absorption was the absorption rate constant, determined in situ by means of a loop perfusion technique, performed in colon and in whole small intestine of rat at three pHs (5.00, 7.00 and 8.00) and in the presence of folic acid and methotrexate. Different concentrations of the drug were perfused in each condition. The concentrations versus time data were modeled with different kinetic absorption and inhibition differential equations to obtain the passive and active transport components and to elucidate the inhibition mechanisms. The results obtained confirm that triamterene is absorbed by means of passive diffusion and by a transporter or transporters related to folates. Folic acid and methotrexate are able to inhibit triamterene absorption. The results do not allow the selection of a competitive or non-competitive model for inhibition and this fact could be due to the presence of different carriers. The possibility of the existence of a secretion process sensitive to verapamil is also discussed.

Application of a fluorescence sensor for miniscale on-line monitoring of powder mixing kinetics.

A portable system using light-induced fluorescence technology (LIF) was development as an analytical tool for on-line monitoring of various manufacturing process applications. The LIF system was verified in several laboratory scale process applications specifically in noninvasive real-time observations of blend kinetics in tumbler blenders. This technology, through careful selection of filters for specific formulations, can provide clean and unadulterated raw data that shows the actual blend characteristic behavior of powder mixtures such as homogeneity end point and blend stability. Consistent blend homogeneity end point was demonstrated for all runs with LIF where data were verified by thief sampling and UV spectrophotometric assays. A correlation between LIF signal and drug powder concentration was established with limits of detection below 0.02% w/w for the API, Triamterene.

Pharmacokinetics and pharmacodynamics of triamterene and hydrochlorothiazide and their combination in healthy volunteers.

Although triamterene has been in clinical use for over 30 years, the linearity of triamterene kinetics was not systematically tested. Moreover, although triamterene is mostly applied concomitantly with thiazide-type diuretics the interaction of triamterene (TA) with hydrochlorothiazide (HCT) is subject to a controversial discussion. Therefore, the aim of this study was to examine the dose linearity of TA and the pharmacokinetic and pharmacodynamic interaction of triamterene and hydrochlorothiazide. In the first study 10 healthy volunteers received 0, 12.5, 25, 50, and 100 mg triamterene orally in a balanced crossover design. In the second study 0, 25, and 50 mg TA with 12.5, and 25 mg HCT, respectively, were administered to 12 healthy volunteers. Urine volume and concentration of sodium, TA, hydroxytriamterene sulfate (OH-TA ester), and HCT were measured by flame photometry and thin-layer chromatography, respectively. The observation period for each treatment was 3 days and the drug was given on the second day. Sodium excretion was increased by both drugs. Renal excretion of both TA and OH-TA ester seemed to be reduced at higher doses. However, statistical evaluation revealed no significant (p = 0.37, and p = 0.20, respectively) deviation from linearity. Renal excretion of HCT was not affected by TA and vice versa. However, renal excretion of OH-TA ester is significantly reduced when HCT is administered concomitantly. The renal excretion rate of sodium can be described by a common Emax model when the effects of the excretion rates of both TA and HCT are additive. It is concluded that the pharmacokinetics of TA is linear within the tested dose range and that pharmacodynamic additivity of HCT and TA is not due to a pharmacokinetic interaction. The results support the hypothesis of a sequential nephron blockade for both drugs acting on different tubular segments.

Direct determination of triamterene by potentiometry using a coated wire selective electrode.

A coated wire triamterene-selective electrode based on the incorporation of a triamterene-tetraphenylborate ion-pair in a poly(vinylchloride) coating membrane was constructed. The influence of membrane composition, temperature, pH of the test solution, and foreign ions on the electrode performance were investigated. The electrode showed a Nernstian response over a triamterene concentration range from 1.0 x 10(-6) to 3.5 x 10(-2) M, at 25 degrees C, and was found to be very selective, precise, and usable within the pH range 4.5-7.5. The standard electrode potentials, E degrees, were determined at 15, 20, 25, 30, 35, 40 and 45 degrees C and used to calculate the isothermal temperature coefficient (dE degrees /dt) of the electrode. Temperatures higher than 45 degrees C seriously affected the electrode performance. The electrode was successfully applied to the potentiometric determination of triamterene hydrochloride both in pure solutions and in pharmaceutical preparations.

Triamterene measurements in the aqueous humor of rabbits.

The kinetics of topical triamterene penetration were estimated from the time-course measurements of triamterene (in Dyazide) concentrations in the anterior chamber of six rabbits (n=12, left and right eyes). The two-compartment model of Jones and Maurice (1) was fitted to the measurements. We found the apparent elimination rate constant oftriamterene A = 0.33 +/- 0.12 hr(-1), the apparent absorption rate constant of triamterene B = 2.68 +/- 0.55 hr(-1), the cornea-aqueous transfer coefficient in reference to the corneal volume of triamterene kc.ca = 0.28 +/- 0.05 hr(-1), the loss coefficient of triamterene from the anterior chamber ko = 0.43 +/- 0.16 hr(-1) and the amount of triamterene in the cornea at time zero Mo = 483 +/- 125 ng/ml. The mean of ko = 0.43 hr(-1) is significantly lower (p = 0.04% using ZTEST) than the lower limit of aqueous loss coefficient = 0.58 hr(-1) usually found in rabbits (2). We conclude that Dyazide lowers the aqueous flow rate in the positive direction, considering glaucoma treatment. Peak triamterene concentration in the anterior chamber was P = 120 +/- 32 ng/ml. Half-life for elimination from the aqueous humor was T1/2 = 1.84 +/- 0.65 hr (Mean +/- SD).

Pharmacokinetics of diuretics in geriatric patients.

Pharmacokinetics of three diuretics (furosemide, spironolactone, and triamterene) were investigated in 70 geriatric patients. Comparing the data with the corresponding values of young healthy volunteers, mean plasma concentrations of furosemide and spironolactone (and peak concentrations of triamterene) were markedly higher in the geriatric patients. Different concomitant diuretic therapy (hydrochlorothiazide vs. piretanide) seems to influence the kinetic parameters of triamterene and its active metabolite in the geriatric patients. In elderly patients reduction or correction of the dosage seems to be necessary for all three diuretics investigated in our studies.

Pharmacokinetics of triamterene in geriatric patients--influence of piretanide and hydrochlorothiazide.

Pharmacokinetics of triamterene (single oral dose of 50 mg) and its pharmacologically active metabolite (OH-TA-ester) were determined in 20 geriatric patients with multiple diseases. Mean peak concentration of triamterene was increased in the elderly patients compared with the data of young healthy volunteers. Coadministration of piretanide seems to lower the mean plasma concentration (AUC) and the mean concentration after 24 h of triamterene as compared with the coadministration of hydrochlorothiazide.

The effect of diflunisal on the elimination of triamterene in human volunteers.

A major metabolic pathway for triamterene (a potassium sparing diuretic) is aromatic hydroxylation followed by sulphate conjugation. Diflunisal (a salicylate anti-inflammatory agent) also undergoes sulphate conjugation of its phenolic group as a major pathway. We investigated the possible effect of diflunisal on the elimination of triamterene (competition for phenolic sulphonation) in six healthy volunteers by studying the disposition of single doses of triamterene (100 mg) taken alone and in the presence of steady-state levels of diflunisal. Diflunisal coadministration (500 mg b.i.d.) had no effect on the pharmacokinetics of triamterene itself. However, plasma AUC of p-hydroxytriamterene sulphate was greater (4.6 times), and its renal clearance lower (0.24 times), in the presence of diflunisal. There was no change in the formation clearance or protein binding of p-hydroxytriamterene sulphate in the presence of diflunisal. The data point to competition for renal excretory pathways rather than sulphonation capacity. This interaction could have clinical relevance since p-hydroxytriamterene sulphate is pharmacologically active.

Pharmacodynamics and pharmacokinetics of furosemide-retard and furosemide-retard/triamterene.

In a randomized cross-over study the saluretic effect of furosemide-retard was compared with the combination of furosemide-retard/triamterene in 10 healthy male volunteers. The combination led to a significantly stronger excretion of sodium and a significantly lower excretion of potassium than furosemide-retard. The interaction of the saluretic with the antikaliuretic was even more distinctly expressed regarding sodium related quotients. The combination furosemide-retard/triamterene differs significantly from furosemide-retard in the main considering Na+/Cl-, Na+/K+ and Na+/Mg2+ quotients. The concentration time curves for furosemide and OH-TA-sulphate in the plasma are nearly similar. Maximal plasma levels for furosemide are reached after 3.9h and for OH-TA-sulphate after 2.2h. The 'apparent' elimination half-life time for furosemide is 2.1h and the elimination half-life time for OH-TA-sulphate is 2.0h.

Improvement of the diuretic effect of triamterene via solid dispersion technique with PEG 4000.

The present investigation was designed and undertaken in order to substantiate further contention concerning the universality of the utilization of PEG polymers as matrix carriers. This study could then be considered an attempt to enhance the dissolution rate of triamterene, with the subsequent enhancement in its absorption rate, via solid dispersion using PEG 4000. The approach of solid dispersions was found useful for optimizing the pharmacokinetic of triamterene in rats.

[The pharmacodynamic and pharmacokinetic characteristics of furosemide and furesis]. / Osobennosti farmakodinamiki i farmakokinetiki furosemida i furezisa.

The object of the work was comparative study of the special features of the pharmacodynamic and pharmacokinetic properties of the diuretics furosemide and furesis in an ambulant regimen with the subject lying in an antiorthostatic position. Six practically healthy males were examined. They were given per os either 40 mg furosemide or one tablet of furesis (49 mg furosemide and 50 mg triamterine). Blood from the vein and urine were repeatedly tested.

[A pharmacokinetic study of korinfar-retard in monotherapy and in combination with cordanum and triampur in patients with arterial hypertension]. / Izuchenie farmakokinetiki korinfara-retard v monoterapii i v sochetanii s kordanumom i triampurom u bol'nykh s arterial'noi gipertenziei.

The long-acting corinfar formulation, corinfar-retard tablets, 20 mg (AWD, Germany), was studied for pharmacokinetics in single and course use in 40 patients with arterial hypertension, as well as for its effects of cordanum and triampur. Patients' plasma corinfar was measured by high performance liquid chromatography. There were no changes in the pharmacokinetics of the agent when it was used in its course use. Cordanum and triampur was demonstrated to have no effects on the pharmacokinetics of corinfar during their application.