In vitro testing of a funnel-shaped tip catheter model to decrease clot migration during mechanical thrombectomy.
Sci Rep
; 10(1): 633, 2020 01 20.
Article
in En
| MEDLINE
| ID: mdl-31959777
ABSTRACT
One limitation of mechanical thrombectomy (MT) is clot migration during procedure. This might be caused by abruption of the trapped thrombus at the distal access catheter (DAC) tip during stent-retriever retraction due to the cylindrical shaped tip of the DAC. Aiming to solve this problem, this study evaluates the proof-of-concept of a new designed funnel-shaped tip, in an experimental in vitro setting. Two catheter models, one with a funnel-shaped tip and one with a cylindrical-shaped tip, were compared in an experimental setup. For MT a self-made vessel model and thrombi generated from pig's blood were used. MT was performed 20 times for each device using two different stent-retrievers, 10 times respectively. For the funnel-shaped model for both stent-retrievers (Trevo XP ProVue 3/20 mm; Trevo XP ProVue 4/20 mm) MT was successful at first pass in 9/10 (90%), respectively. For the cylindrical-shaped model MT was successful at first pass in 5/10 (50%) with the smaller stent-retriever and in 6/10 (60%) with the larger stent-retriever. The experiments show a better recanalization rate for funnel-shaped tips, than for cylindrical-shaped tips. These results are indicating a good feasibility for this new approach, thus the development of a prototype catheter seems reasonable.
Full text:
1
Collection:
01-internacional
Database:
MEDLINE
Main subject:
Thrombosis
/
Thrombectomy
/
Equipment Design
/
Catheters
Limits:
Animals
Language:
En
Journal:
Sci Rep
Year:
2020
Type:
Article
Affiliation country:
Germany