Influence of carrier materials and coatings on retinal pigment epithelium cultivation and functions.

Properties of retinal pigment epithelium (RPE) are relevant for the development of cell culture models concerning an exact reproduction of the ocular cell biology. Here, we want to investigate how different carrier materials and coatings influence proliferation, differentiation and functions of RPE in regard to development of a three-dimensional cell culture model based on primary porcine RPE. Human RPE cell line ARPE-19 and primary porcine RPE were used. Cells were cultivated on plates which were coated with collagen I, collagen IV, laminin or fibronectin, respectively, and cell numbers were assessed after different time periods via trypan blue staining. Also, the ARPE-19 were cultivated on polydimethylsiloxane (PDMS), alginate, gelatin methacrylate (GelMA), poly-N-isopropylacrylamide (PNIPAM) and cells number were assessed. Primary RPE were cultured on PDMS material. Supernatants were collected and analyzed via ELISA for their vascular endothelial growth factor (VEGF) and transforming growth factor ß (TGF-ß) content. After day 14 cells were lysed and retinal pigment epithelium-specific 65 kDa protein (RPE65) and bestrophin-1 (BEST1) expression was investigated via Western blot. Cellular functions were tested on collagen I, collagen IV, laminin and fibronectin with and without PDMS. Scratch assay was performed to detect wound healing 24 and 48 h after scratch application. Immunolabeling was used to highlight tight junctions in concert with Hoechst staining and phalloidin to label cell nuclei and actin filaments, respectively. Phagocytosis of fluorescently labeled latex beads opsonized with photoreceptor outer segments (POS) was assessed via fluorescence microscopy. Transepithelial electrical resistance was measured for detection of cellular barrier. Gene expression of RDH11 (retinol dehydrogenase 11), BEST1 (bestrophin 1) and TGFB1 (transforming growth factor beta 1) was investigated via real-time PCR. Only PDMS carrier material was appropriate for primary RPE and ARPE-19 cell cultivation. Coating of PDMS with laminin led to increased proliferation. In primary RPE, VEGF secretion was increased if PDMS was coated with laminin or fibronectin compared to uncoated PDMS. No significant changes in phagocytic ability and generation of tight junctions were detected between different coatings, but RPE65 expression was reduced on fibronectin coated PDMS. Laminin coating decreased TGF-ß and increased BEST1 protein expression. Also, RPE on collagen IV showed highest TEER on transwell plates. The genes RDH11 and TGFB1 were decreased when coated with collagen IV without PDMS as well as coated PDMS. Laminin and collagen IV coating led to an increased wound healing. Cultivation of RPE and ARPE-1 on PDMS is a possible alternative for cell culture models whereas alginate, GelMA and PNIPAM were not suitable. Coating with laminin increased the proliferation, wound healing and VEGF secretion of the cells. The results suggest that laminin coated PDMS as carrier material is suitable for the development of 3D culture model systems.

Microengineered Hollow Graphene Tube Systems Generate Conductive Hydrogels with Extremely Low Filler Concentration.

The fabrication of electrically conductive hydrogels is challenging as the introduction of an electrically conductive filler often changes mechanical hydrogel matrix properties. Here, we present an approach for the preparation of hydrogel composites with outstanding electrical conductivity at extremely low filler loadings (0.34 S m-1, 0.16 vol %). Exfoliated graphene and polyacrylamide are microengineered to 3D composites such that conductive graphene pathways pervade the hydrogel matrix similar to an artificial nervous system. This makes it possible to combine both the exceptional conductivity of exfoliated graphene and the adaptable mechanical properties of polyacrylamide. The demonstrated approach is highly versatile regarding porosity, filler material, as well as hydrogel system. The important difference to other approaches is that we keep the original properties of the matrix, while ensuring conductivity through graphene-coated microchannels. This novel approach of generating conductive hydrogels is very promising, with particular applications in the fields of bioelectronics and biohybrid robotics.

The selective prolyl hydroxylase inhibitor IOX5 stabilizes HIF-1α and compromises development and progression of acute myeloid leukemia.

Acute myeloid leukemia (AML) is a largely incurable disease, for which new treatments are urgently needed. While leukemogenesis occurs in the hypoxic bone marrow, the therapeutic tractability of the hypoxia-inducible factor (HIF) system remains undefined. Given that inactivation of HIF-1α/HIF-2α promotes AML, a possible clinical strategy is to target the HIF-prolyl hydroxylases (PHDs), which promote HIF-1α/HIF-2α degradation. Here, we reveal that genetic inactivation of Phd1/Phd2 hinders AML initiation and progression, without impacting normal hematopoiesis. We investigated clinically used PHD inhibitors and a new selective PHD inhibitor (IOX5), to stabilize HIF-α in AML cells. PHD inhibition compromises AML in a HIF-1α-dependent manner to disable pro-leukemogenic pathways, re-program metabolism and induce apoptosis, in part via upregulation of BNIP3. Notably, concurrent inhibition of BCL-2 by venetoclax potentiates the anti-leukemic effect of PHD inhibition. Thus, PHD inhibition, with consequent HIF-1α stabilization, is a promising nontoxic strategy for AML, including in combination with venetoclax.

One-Pot Synthesis of Cereblon Proteolysis Targeting Chimeras via Photoinduced C(sp2)-C(sp3) Cross Coupling and Amide Formation for Proteolysis Targeting Chimera Library Synthesis.

In this study, a one-pot synthesis via photoinduced C(sp2)-C(sp3) coupling followed by amide formation to access proteolysis targeting chimeras (PROTACs) was developed. The described protocol was studied on cereblon (CRBN)-based E3-ligase binders and (+)-JQ-1, a bromodomain inhibitor, to generate BET (bromodomain and extra terminal domain) targeting protein degraders. The generated PROTACs were profiled in vitro and tested for their degradation ability with several potent candidates identified. Upfront, the individual reactions of the one-pot transformation were carefully optimized for CRBN binder functionalization and multiple heterobifunctional linker moieties were designed and synthesized. Separate scopes detailing the C(sp2)-C(sp3) coupling and one-pot PROTAC synthesis are described in this report as well as a library miniaturization study showing the high-throughput compatibility. Overall, the developed protocol provides rapid access to PROTACs in a single process, thereby allowing efficient generation of CRBN-based PROTAC libraries.

Tetrapodal ZnO-Based Composite Stents for Minimally Invasive Glaucoma Surgery.

The glaucoma burden increases continuously and is estimated to affect more than 100 million people by 2040. As there is currently no cure to restore the optic nerve damage caused by glaucoma, the only controllable parameter is the intraocular pressure (IOP). In recent years, minimally invasive glaucoma surgery (MIGS) has emerged as an alternative to traditional treatments. It uses micro-sized drainage stents that are inserted through a small incision, minimizing the trauma to the tissue and reducing surgical and postoperative recovery time. However, a major challenge for MIGS devices is foreign body reaction and fibrosis, which can lead to a complete failure of the device. In this work, the antifibrotic potential of tetrapodal ZnO (t-ZnO) microparticles used as an additive is elucidated by using rat embryonic fibroblasts as a model. A simple, direct solvent-free process for the fabrication of stents with an outer diameter of 200-400 µm is presented, in which a high amount of t-ZnO particles (45-75 wt %) is mixed into polydimethylsiloxane (PDMS) and a highly viscous polymer/particle mixture is extruded. The fabricated stents possess increased elastic modulus compared to pure PDMS while remaining flexible to adapt to the curvature of an eye. In vitro experiments showed that the fibroblast cell viability was inhibited to 43 ± 3% when stents with 75 wt % t-ZnO were used. The results indicate that cell inhibiting properties can be attributed to an increased amount of protruding t-ZnO particles on the stent surface, leading to an increase in local contacts with cells and a disruption of the cell membrane. As a secondary mechanism, the released Zn ions could also contribute to the cell-inhibiting properties in the close vicinity of the stent surface. Overall, the fabrication method and the antifibrotic and mechanical properties of developed stents make them promising for application in MIGS.

Living Materials Herald a New Era in Soft Robotics.

Living beings have an unsurpassed range of ways to manipulate objects and interact with them. They can make autonomous decisions and can heal themselves. So far, a conventional robot cannot mimic this complexity even remotely. Classical robots are often used to help with lifting and gripping and thus to alleviate the effects of menial tasks. Sensors can render robots responsive, and artificial intelligence aims at enabling autonomous responses. Inanimate soft robots are a step in this direction, but it will only be in combination with living systems that full complexity will be achievable. The field of biohybrid soft robotics provides entirely new concepts to address current challenges, for example the ability to self-heal, enable a soft touch, or to show situational versatility. Therefore, "living materials" are at the heart of this review. Similarly to biological taxonomy, there is a recent effort for taxonomy of biohybrid soft robotics. Here, an expansion is proposed to take into account not only function and origin of biohybrid soft robotic components, but also the materials. This materials taxonomy key demonstrates visually that materials science will drive the development of the field of soft biohybrid robotics.