RESUMEN
In colloidal nanoparticle (NPs) devices, trap state densities at their surface exert a profound impact on the rate of charge carrier recombination and, consequently, on the deterioration of the device performance. Here, we report on the successful application of a ligand exchange strategy to effectively passivate the surface of cuprite (Cu2O) NPs. Cu2O NPs were prepared by means of a novel synthetic route based on flame spray pyrolysis. FTIR, XRD, XPS, and HRTEM measurements corroborate the formation of cubic cuprite Cu2O nanocrystals, excluding the possible presence of undesired CuO or Cu phases. Most importantly, steady-state emission and transient absorption assays document that surface passivation results in substantial changes in the intensity of emissive excitonic states--centered at copper and oxygen vacancies--and in the lifetime of excitons near the band edge. To shed light onto ultrafast processes in Cu2O nanocrystals additional pump probe experiments on the femtosecond and nanosecond time scales were carried out. Two discernible species were observed: on one hand, an ultrafast component (~ps) that relates to the excitons; on the other hand, a long-lived component (~µs) that originates from the defects/trap states.
RESUMEN
The effect of the additive 1,8-octanedithiol (ODT) on the nanometer-scale morphology and local photophysical properties of low-bandgap polymer blends of poly[2,6-(4,4-bis(2-ethylhexyl)-4H-cyclopenta[2,1-b;3,4-b'] dithiophene)- alt-4,7(2,1,3-benzothiadiazole)] (PCPDTBT) and [6,6]-phenyl C(61) -butyric acid methyl ester (PCBM) is investigated. Phase separations of the PCPDTBT:PCBM blend film induced by ODT are visualized by the morphological changes from fibril-shaped features to spherical bumps, by the dramatically increased photoluminescence emission from PCPDTBT that was originally largely quenched, and by the fluctuations of spectral features at different locations of the sample surface. The correlations between the morphology and the local photophysical properties of the blend film with/without ODT at both the micrometer and nanometer scales are revealed by confocal and high-resolution near-field spectroscopic mapping techniques.
Asunto(s)
Fulerenos/química , Luz , Nanopartículas/química , Transición de Fase/efectos de la radiación , Polímeros/química , Análisis Espectral/métodos , Microscopía Confocal , Óptica y Fotónica , Espectrometría Raman , Compuestos de Sulfhidrilo/química , Tiadiazoles/químicaRESUMEN
With mortality rates of liver cancer doubling in the last 20 years, this disease is on the rise and has become the fifth most common cancer in men and the seventh most common cancer in women. Hepatocellular carcinoma (HCC) represents approximately 90% of all primary liver cancers and is a major global health concern. Patients with HCC can be managed curatively with surgical resection or with liver transplantation, if they are diagnosed at an early stage. Unfortunately, most patients with HCC present with advanced stages of the disease and have underlying liver dysfunction, which allows only 15% of patients to be eligible for curative treatment. Several different treatment modalities are available, including locoregional therapy radiofrequency ablation, microwave ablation, percutaneous ethanol injection, trans-arterial chemoembolization, transarterial radio-embolization, cryoablation, radiation therapy, stereotactic radiotherapy, systemic chemotherapy, molecularly targeted therapies, and immunotherapy. Immunotherapy has recently become a promising method for inhibiting HCC tumor progression, recurrence, and metastasis. The term "Immunotherapy" is a catch-all, encompassing a wide range of applications and targets, including HCC vaccines, adoptive cell therapy, immune checkpoint inhibitors, and use of oncolytic viruses to treat HCC. Immunotherapy in HCC is a relatively safe option for treating patients with advanced disease in the USA who are either unable to receive or failed sorafenib/lenvatinib therapy and thus may offer an additional survival benefit for these patients. The purpose of this review is to elaborate on some of the most recent advancements in immunotherapy.
RESUMEN
BACKGROUND: Colorectal cancer (CRC) is the third leading cause of cancer-related deaths in the United States. African Americans are disproportionately affected by CRC. Our hypothesis is that driver genes with known and novel mutations have an impact on CRC outcome in this population. Therefore, we investigated the variants' profiles in a panel of 15 CRC genes. PATIENTS & METHODS: Colorectal specimens (n=140) were analyzed by targeted exome sequencing using an Ion Torrent platform. Detected variants were validated in 36 samples by Illumina sequencing. The novel status of the validated variants was determined by comparison to publicly available databases. Annotated using ANNOVAR and in-silico functional analysis of these variants were performed to determine likely pathogenic variants. RESULTS: Overall, 121 known and novel variants were validated: APC (27%), AMER1 (3%), ARID1 (7%), MSH3 (12%), MSH6 (10%), BRAF (4%), KRAS (6%), FBXW7 (4%), PIK3CA (6%), SMAD4 (5%), SOX9 (2%), TCF7L2 (2%), TGFBR2 (5%), TP53 (7%). From these validated variants, 12% were novel in 8 genes (AMER1, APC, ARID1A, BRAF, MSH6, PIK3CA, SMAD4, and TCF7L2). Of the validated variants, 23% were non-synonymous, 14% were stopgains, 24% were synonymous and 39% were intronic variants. CONCLUSION: We here report the specifics of variants' profiles of African Americans with colorectal lesions. Validated variants showed that Tumor Suppressor Genes (TSGs) APC and ARID1 and DNA Mismatch repair (MMR) genes MSH3 and MSH6 are the genes with the highest numbers of validated variants. Oncogenes KRAS and PIK3CA are also altered and likely participate in the increased proliferative potential of the mutated colonic epithelial cells in this population.
RESUMEN
PURPOSE: African Americans have a higher incidence and mortality from colorectal cancer. This disparity might be due, in part, to the type of mutations in driver genes. In this study, we examined alterations specific to APC, MSH3, and MSH6 genes using targeted exome sequencing to determine distinctive variants in the course of neoplastic transformation. EXPERIMENTAL DESIGN: A total of 140 African American colon samples (30 normal, 21 adenomas, 33 advanced adenomas and 56 cancers) were used as our discovery set on an Ion Torrent platform. A 36 samples subset was resequenced on an Illumina platform for variants' validation. Bioinformatics analyses were performed and novel validated variants are reported. RESULTS: Two novel MSH6 variants were validated and mapped to the MutS-V region near the MSH2 binding site. For MSH3, 4 known variants were validated and were located in exon 10 (3 non-synonymous) and exon 18 (1 synonymous). As for APC, 20 variants were validated with 4 novel variants: 3 stopgain and 1 non-synonymous. These variants mapped prior to and on the Armadillo repeats region, to the 15-amino acid repeat region, and to the 20-amino acid repeats region, respectively. CONCLUSION: We defined novel variants that target DNA mismatch repair and APC genes in African Americans with colorectal lesions. A greater frequency of variants in genes encoding DNA mismatch repair functions and APC likely plays major roles in colorectal cancer initiation and higher incidence of the disease in African Americans.
RESUMEN
PURPOSE: Next Generation Sequencing (NGS) is currently used to establish mutational profiles in many multigene diseases such as colorectal cancer (CRC), which is on the rise in many parts of the developing World including, Iran. Little is known about its genetic hallmarks in these populations. AIM: To identify variants in 15 CRC-associated genes in patients of Iranian descent. RESULTS: There were 51 validated variants distributed on 12 genes: 22% MSH3 (n = 11/51), 10% MSH6 (n = 5/51), 8% AMER1 (n = 4/51), 20% APC (n = 10/51), 2% BRAF (n = 1/51), 2% KRAS (n = 1/51), 12% PIK3CA (n = 6/51), 8% TGFßR2A (n = 4/51), 2% SMAD4 (n = 1/51), 4% SOX9 (n = 2/51), 6% TCF7L2 (n = 3/51), and 6% TP53 (n = 3/51). Most known and distinct variants were in mismatch repair genes (MMR, 32%) and APC (20%). Among oncogenes, PIK3CA was the top target (12%). MATERIALS AND METHODS: CRC specimens from 63 Shirazi patients were used to establish the variant' profile on an Ion Torrent platform by targeted exome sequencing. To rule-out technical artifacts, the variants were validated in 13 of these samples using an Illumina NGS platform. Validated variants were annotated and compared to variants from publically available databases. An in-silico functional analysis was performed. MSI status of the analyzed samples was established. CONCLUSION: These results illustrate for the first time CRC mutational profile in Iranian patients. MSH3, MSH6, APC and PIK3CA genes seem to play a bigger role in the path to cancer in this population. These findings will potentially lead to informed genetic diagnosis protocol and targeted therapeutic strategies.
Asunto(s)
Biomarcadores de Tumor/genética , Neoplasias Colorrectales/genética , Secuenciación del Exoma/métodos , Exoma , Perfilación de la Expresión Génica/métodos , Variación Genética , Secuenciación de Nucleótidos de Alto Rendimiento , Neoplasias Colorrectales/etnología , Neoplasias Colorrectales/patología , Neoplasias Colorrectales/terapia , Biología Computacional , Bases de Datos Genéticas , Predisposición Genética a la Enfermedad , Irán , Fenotipo , Valor Predictivo de las Pruebas , Pronóstico , TranscriptomaRESUMEN
BACKGROUND AND AIM: Next generation sequencing (NGS) has quickly the tool of choice for genome and exome data generation. The multitude of sequencing platforms as well as the variabilities within each platform need to be assessed. In this paper we used two platforms (ION TORRENT AND ILLUMINA) to assess single nucleotides variants in colorectal cancer (CRC) specimens. METHODS: CRC specimens (n = 13) collected from 6 CRC (cancer and matched normal) patients were used to establish the mutational profile using ION TORRENT AND ILLUMINA sequencing platforms. We analyzed a set of samples from Formalin Fixed Paraffin Embedded and FF (FF) samples on both platforms to assess the effect of sample nature (FFPE vs. FF) on sequencing outcome and to evaluate the similarity/differences of SNVs across the two platforms. In addition, duplicates of FF samples were sequenced on each platform to assess variability within platform. RESULTS: The comparison of FF replicates to each other gave a concordance of 77% (± 15.3%) in Ion Torrent and 70% (± 3.7%) in Illumina. FFPE vs. FF replicates gave a concordance of 40% (± 32%) in Ion Torrent and 49% (± 19%) in Illumina. For the cross platform concordance were FFPE compared to FF (Average of 75% (± 9.8%) for FFPE samples and 67% (± 32%) for FF and 70% (± 26.8%) overall average). CONCLUSION: Our data show a significant variability within and across platforms. Also the number of detected variants depend on the nature of the specimen; FF vs. FFPE. Validation of NGS discovered mutations is a must to rule-out false positive mutants. This validation might either be performed through a second NGS platform or through Sanger sequencing.
RESUMEN
In this work, we report efficient semitransparent perovskite solar cells using solution-processed silver nanowires (AgNWs) as top electrodes. A thin layer of zinc oxide nanoparticles is introduced beneath the AgNWs, which fulfills two essential functionalities: it ensures ohmic contact between the PC60BM and the AgNWs and it serves as a physical foundation that enables the solution-deposition of AgNWs without causing damage to the underlying perovskite. The as-fabricated semitransparent perovskite cells show a high fill factor of 66.8%, Voc = 0.964 V, Jsc = 13.18 mA cm(-2), yielding an overall efficiency of 8.49% which corresponds to 80% of the reference devices with reflective opaque electrodes.
RESUMEN
The evolution of real-time medical diagnostic tools such as angiography and computer tomography from radiography based on photographic plates was enabled by the development of integrated solid-state X-ray photon detectors, based on conventional solid-state semiconductors. Recently, for optoelectronic devices operating in the visible and near infrared spectral regions, solution-processed organic and inorganic semiconductors have also attracted immense attention. Here we demonstrate a possibility to use such inexpensive semiconductors for sensitive detection of X-ray photons by direct photon-to-current conversion. In particular, methylammonium lead iodide perovskite (CH3NH3PbI3) offers a compelling combination of fast photoresponse and a high absorption cross-section for X-rays, owing to the heavy Pb and I atoms. Solution processed photodiodes as well as photoconductors are presented, exhibiting high values of X-ray sensitivity (up to 25 µC mGyair-1 cm-3) and responsivity (1.9×104 carriers/photon), which are commensurate with those obtained by the current solid-state technology.
RESUMEN
The production of high-performance, solution-processed kesterite Cu2ZnSn(Sx,Se1-x)4 (CZTSSe) solar cells typically relies on high-temperature crystallization processes in chalcogen-containing atmosphere and often on the use of environmentally harmful solvents, which could hinder the widespread adoption of this technology. We report a method for processing selenium free Cu2ZnSnS4 (CZTS) solar cells based on a short annealing step at temperatures as low as 350 °C using a molecular based precursor, fully avoiding highly toxic solvents and high-temperature sulfurization. We show that a simple device structure consisting of ITO/CZTS/CdS/Al and comprising an extremely thin absorber layer (â¼110 nm) achieves a current density of 8.6 mA/cm(2). Over the course of 400 days under ambient conditions encapsulated devices retain close to 100% of their original efficiency. Using impedance spectroscopy and photoinduced charge carrier extraction by linearly increasing voltage (photo-CELIV), we demonstrate that reduced charge carrier mobility is one limiting parameter of low-temperature CZTS photovoltaics. These results may inform less energy demanding strategies for the production of CZTS optoelectronic layers compatible with large-scale processing techniques.