Rich Landscape of Colloidal Semiconductor-Metal Hybrid Nanostructures: Synthesis, Synergetic Characteristics, and Emerging Applications.

Nanochemistry provides powerful synthetic tools allowing one to combine different materials on a single nanostructure, thus unfolding numerous possibilities to tailor their properties toward diverse functionalities. Herein, we review the progress in the field of semiconductor-metal hybrid nanoparticles (HNPs) focusing on metal-chalcogenides-metal combined systems. The fundamental principles of their synthesis are discussed, leading to a myriad of possible hybrid architectures including Janus zero-dimensional quantum dot-based systems and anisotropic quasi 1D nanorods and quasi-2D platelets. The properties of HNPs are described with particular focus on emergent synergetic characteristics. Of these, the light-induced charge-separation effect across the semiconductor-metal nanojunction is of particular interest as a basis for the utilization of HNPs in photocatalytic applications. The extensive studies on the charge-separation behavior and its dependence on the HNPs structural characteristics, environmental and chemical conditions, and light excitation regime are surveyed. Combining the advanced synthetic control with the charge-separation effect has led to demonstration of various applications of HNPs in different fields. A particular promise lies in their functionality as photocatalysts for a variety of uses, including solar-to-fuel conversion, as a new type of photoinitiator for photopolymerization and 3D printing, and in novel chemical and biomedical uses.

Electric-field-induced colour switching in colloidal quantum dot molecules at room temperature.

Colloidal semiconductor quantum dots are robust emitters implemented in numerous prototype and commercial optoelectronic devices. However, active fluorescence colour tuning, achieved so far by electric-field-induced Stark effect, has been limited to a small spectral range, and accompanied by intensity reduction due to the electron-hole charge separation effect. Utilizing quantum dot molecules that manifest two coupled emission centres, we present a unique electric-field-induced instantaneous colour-switching effect. Reversible emission colour switching without intensity loss is achieved on a single-particle level, as corroborated by correlated electron microscopy imaging. Simulations establish that this is due to the electron wavefunction toggling between the two centres, induced by the electric field, and affected by the coupling strength. Quantum dot molecules manifesting two coupled emission centres may be tailored to emit distinct colours, opening the path for sensitive field sensing and colour-switchable devices such as a novel pixel design for displays or an electric-field-induced colour-tunable single-photon source.

Seeing is believing: Correlating optoelectronic functionality with atomic scale imaging of single semiconductor nanocrystals.

A unique on-chip method for the direct correlation of optical properties, with atomic-scale chemical-structural characteristics for a single quantum dot (QD), is developed and utilized in various examples. This is based on performing single QD optical characterization on a modified glass substrate, followed by the extraction of the relevant region of interest by focused-ion-beam-scanning electron microscope processing into a lamella for high resolution scanning transmission electron microscopy (STEM) characterization with atomic scale resolution. The direct correlation of the optical response under an electric field with STEM analysis of the same particle allows addressing several single particle phenomena: first, the direct correlation of single QD photoluminescence (PL) polarization and its response to the external field with the QD crystal lattice alignment, so far inferred indirectly; second, the identification of unique yet rare few-QD assemblies, correlated directly with their special spectroscopic optical characteristics, serving as a guide for future designed assemblies; and third, the study on the effect of metal island growth on the PL behavior of hybrid semiconductor-metal nanoparticles, with relevance for their possible functionality in photocatalysis. This work, therefore, establishes the use of the direct on-chip optical-structural correlation method for numerous scenarios and timely questions in the field of QD research.

The Effect of Monomer Size on Fusion and Coupling in Colloidal Quantum Dot Molecules.

The fusion step in the formation of colloidal quantum dot molecules, constructed from two core/shell quantum dots, dictates the coupling strength and hence their properties and enriched functionalities compared to monomers. Herein, studying the monomer size effect on fusion and coupling, we observe a linear relation of the fusion temperature with the inverse nanocrystal radius. This trend, similar to that in nanocrystal melting, emphasizes the role of the surface energy. The suggested fusion mechanism involves intraparticle ripening where atoms diffuse to the reactive connecting neck region. Moreover, the effect of monomer size and neck filling on the degree of electronic coupling is studied by combined atomistic-pseudopotential calculations and optical measurements, uncovering strong coupling effects in small QD dimers, leading to significant optical changes. Understanding and controlling the fusion and hence coupling effect allows tailoring the optical properties of these nanoscale structures, with potential applications in photonic and quantum technologies.

Controlling the Surface of Aluminum Nanocrystals: From Aluminum Oxide to Aluminum Fluoride.

Aluminum nanocrystals are emerging as a promising alternative to silver and gold for various applications ranging from plasmonic functionalities to photocatalysis and as energetic materials. Such nanocrystals often exhibit an inherent surface oxidation layer, as aluminum is highly reactive. Its controlled removal is challenging but required, as it can hinder the properties of the encaged metal. Herein, two wet-chemical colloidal approaches toward the surface coating of Al nanocrystals, which afford control over the surface chemistry of the nanocrystals and the oxide thickness, are presented. The first approach utilizes oleic acid as a surface ligand by its addition toward the end of the Al nanocrystals synthesis, and the second approach is the post-synthesis treatment of Al nanocrystals with NOBF4 , in a "wet" colloidal-based approach, which is found to etch and fluorinate the surface oxides. As surface chemistry is an important handle for controlling materials' properties, this research paves a path for manipulating Al nanocrystals while promoting their utilization in diverse applications.

Ligands Mediate Anion Exchange between Colloidal Lead-Halide Perovskite Nanocrystals.

The soft lattice of lead-halide perovskite nanocrystals (NCs) allows tuning their optoelectronic characteristics via anion exchange by introducing halide salts to a solution of perovskite NCs. Similarly, cross-anion exchange can occur upon mixing NCs of different perovskite halides. This process, though, is detrimental for applications requiring perovskite NCs with different halides in close proximity. We study the effects of various stabilizing surface ligands on the kinetics of the cross-anion exchange reaction, comparing zwitterionic and ionic ligands. The kinetic analysis, inspired by the "cage effect" for solution reactions, showcases a mechanism where the surface capping ligands act as anion carriers that diffuse to the NC surface, forming an encounter pair enclosed by the surrounding ligands that initiates the anion exchange process. The zwitterionic ligands considerably slow down the cross-anion exchange process, and while they do not fully inhibit it, they confer improved stability alongside enhanced solubility relevant for various applications.

Coupled Colloidal Quantum Dot Molecules.

ConspectusElectronic coupling and hence hybridization of atoms serves as the basis for the rich properties for the endless library of naturally occurring molecules. Colloidal quantum dots (CQDs) manifesting quantum strong confinement possess atomic-like characteristics with s and p electronic levels, which popularized the notion of CQDs as artificial atoms. Continuing this analogy, when two atoms are close enough to form a molecule so that their orbitals start overlapping, the orbitals energies start to split into bonding and antibonding states made out of hybridized orbitals. The same concept is also applicable for two fused core-shell nanocrystals in close proximity. Their band edge states, which dictate the emitted photon energy, start to hybridize, changing their electronic and optical properties. Thus, an exciting direction of "artificial molecules" emerges, leading to a multitude of possibilities for creating a library of new hybrid nanostructures with novel optoelectronic properties with relevance toward diverse applications including quantum technologies.The controlled separation and the barrier height between two adjacent quantum dots are key variables for dictating the magnitude of the coupling energy of the confined wave functions. In the past, coupled double quantum dot architectures prepared by molecular beam epitaxy revealed a coupling energy of few millielectron volts, which limits the applications to mostly cryogenic operation. The realization of artificial quantum molecules with sufficient coupling energy detectable at room temperature calls for the use of colloidal semiconductor nanocrystal building blocks. Moreover, the tunable surface chemistry widely opens the predesigned attachment strategies as well as the solution processing ability of the prepared artificial molecules, making the colloidal nanocrystals as an ideal candidate for this purpose. Despite several approaches that demonstrated enabling of the coupled structures, a general and reproducible method applicable to a broad range of colloidal quantum materials is needed for systematic tailoring of the coupling strength based on a dictated barrierThis Account addresses the development of nanocrystal chemistry to create coupled colloidal quantum dot molecules and to study the controlled electronic coupling and their emergent properties. The simplest nanocrystal molecule, a homodimer formed from two core/shell nanocrystal monomers, in analogy to homonuclear diatomic molecules, serves as a model system. The shell material of the two CQDs is structurally fused, resulting in a continuous crystal. This lowers the potential energy barrier, enabling the hybridization of the electronic wave functions. The direct manifestation of the hybridization reflects on the band edge transition shifting toward lower energy and is clearly resolved at room temperature. The hybridization energy within the single homodimer molecule is strongly correlated with the extent of structural continuity, the delocalization of the exciton wave function, and the barrier thickness as calculated numerically. The hybridization impacts the emitted photon statistics manifesting faster radiative decay rate, photon bunching effect, and modified Auger recombination pathway compared to the monomer artificial atoms. Future perspectives for the nanocrystals chemistry paradigm are also highlighted.

Hybridization and deconfinement in colloidal quantum dot molecules.

The structural, electronic, and optical properties of CdSe/CdS core-shell colloidal quantum dot molecules, a new class of coupled quantum dot dimers, are explored using atomistic approaches. Unlike the case of dimers grown by molecular beam epitaxy, simulated strain profile maps of free-standing colloidal dimers show negligible additional strain resulting from the attachment. The electronic properties of the relaxed dimers are described within a semiempirical pseudopotential model combined with the Bethe-Salpeter equation within the static screening approximation to account for electron-hole correlations. The interplay of strain, hybridization (tunneling splitting), quantum confinement, and electron-hole binding energies on the optical properties is analyzed and discussed. The effects of the dimensions of the neck connecting the two quantum dot building blocks, as well as the shell thickness, are studied.

Luminescent Anisotropic Wurtzite InP Nanocrystals.

Indium phosphide (InP) nanocrystals are emerging as an alternative to heavy metal containing nanocrystals for optoelectronic applications but lag behind in terms of synthetic control. Herein, luminescent wurtzite InP nanocrystals with narrow size distribution were synthesized via a cation exchange reaction from hexagonal Cu3P nanocrystals. A comprehensive surface treatment with NOBF4 was performed, which removes excess copper while generating stoichiometric In/P nanocrystals with fluoride surface passivation. The attained InP nanocrystals manifest a highly resolved absorption spectrum with a narrow emission line of 80 meV, and photoluminescence quantum yield of up to 40%. Optical anisotropy measurements on ensemble and single particle bases show the occurrence of polarized transitions directly mirroring the anisotropic wurtzite lattice, as also manifested from modeling of the quantum confined electronic levels. This shows a green synthesis path for achieving wurtzite InP nanocrystals with desired optoelectronic properties including color purity and light polarization with potential for diverse optoelectronic applications.

Visualizing Ultrafast Electron Transfer Processes in Semiconductor-Metal Hybrid Nanoparticles: Toward Excitonic-Plasmonic Light Harvesting.

Recently, it was demonstrated that charge separation in hybrid metal-semiconductor nanoparticles (HNPs) can be obtained following photoexcitation of either the semiconductor or of the localized surface plasmon resonance (LSPR) of the metal. This suggests the intriguing possibility of photocatalytic systems benefiting from both plasmon and exciton excitation, the main challenge being to outcompete other ultrafast relaxation processes. Here we study CdSe-Au HNPs using ultrafast spectroscopy with high temporal resolution. We describe the complete pathways of electron transfer for both semiconductor and LSPR excitation. In the former, we distinguish hot and band gap electron transfer processes in the first few hundred fs. Excitation of the LSPR reveals an ultrafast (<30 fs) electron transfer to CdSe, followed by back-transfer from the semiconductor to the metal within 210 fs. This study establishes the requirements for utilization of the combined excitonic-plasmonic contribution in HNPs for diverse photocatalytic applications.

Quantum Photoinitiators: Toward Emerging Photocuring Applications.

Semiconductor nanocrystals are promising photocatalysts for a wide range of applications, ranging from alternative fuel generation to biomedical and environmental applications. This stems from their diverse properties, including flexible spectral tunability, stability, and photocatalytic efficiencies. Their functionality depends on the complex influence of multiple parameters, including their composition, dimensions, architecture, surface coating, and environmental conditions. A particularly promising direction for rapid adoption of these nanoparticles as photocatalysts is their ability to act as photoinitiators (PIs) for radical polymerization. Previous studies served to demonstrate the proof of concept for the use of quantum confined semiconductor nanocrystals as photoinitiators, coining the term Quantum PIs, and provided insights for their photocatalytic mechanism of action. However, these early reports suffered from low efficiencies while requiring purging with inert gases, use of additives, and irradiation by high light intensities with very long excitation durations, which limited their potential for real-life applications. The progress in nanocrystal syntheses and surface engineering has opened the way to the introduction of the next generation of Quantum PIs. Herein, we introduce the research area of nanocrystal photocatalysts, review their studies as Quantum PIs for radical polymerization, from suspension polymerization to novel printing, as well as in a new family of polymerization techniques, of reversible deactivation radical polymerization, and provide a forward-looking view for the challenges and prospects of this field.

Neck Barrier Engineering in Quantum Dot Dimer Molecules via Intraparticle Ripening.

Coupled colloidal quantum dot (CQD) dimers represent a new class of artificial molecules composed of fused core/shell semiconductor nanocrystals. The electronic coupling and wave function hybridization are enabled by the formation of an epitaxial connection with a coherent lattice between the shells of the two neighboring quantum dots where the shell material and its dimensions dictate the quantum barrier characteristics for the charge carriers. Herein we introduce a colloidal approach to control the neck formation at the interface between the two CQDs in such artificial molecular constructs. This allows the tailoring of the neck barrier in prelinked homodimers formed via fusion of multifaceted wurtzite CdSe/CdS CQDs. The effects of reaction time, temperature, and excess ligands are studied. The neck filling process follows an intraparticle ripening mechanism at relatively mild reaction conditions while avoiding interparticle ripening. The degree of surface ligand passivation plays a key role in activating the surface atom diffusion to the neck region. The degree of neck filling strongly depends also on the initial relative orientation of the two CQDs, where homonymous plane attachment allows for facile neck growth, unlike the case of heteronymous plane attachment. Upon neck filling, the observed red-shift of the absorption and fluorescence measured both for ensemble and single dimers is assigned to enhanced hybridization of the confined wave function in CQD dimer molecules, as supported by quantum calculations. The fine-tuning of the particle interface introduced herein provides therefore a powerful tool to further control the extent of hybridization and coupling in CQD molecules.

A Tale of Tails: Thermodynamics of CdSe Nanocrystal Surface Ligand Exchange.

The surface ligands of semiconductor nanocrystals (NCs) are central for determining their properties and for their flexible implementation in diverse applications. Thus far, the thermodynamic characteristics of ligand exchange reactions were attained by indirect methods. Isothermal titration calorimetry is utilized to directly and independently measure both the equilibrium constant and the reaction enthalpy of a model ligand exchange reaction from oleate-capped CdSe NCs to a series of alkylthiols. Increased reaction exothermicity for longer chains, accompanied by a decrease in reaction entropy with an overall enthalpy-entropy compensation behavior is observed, explained by the length-dependent interchain interactions and the organization of the bound ligands on the NCs' surface. An increase in the spontaneity of the reaction with decreasing NC size is also revealed, due to their enhanced surface reactivity. This work provides a fundamental understanding of the physicochemical properties of the NC surface with implications for NC surface ligand design.

ZnSe/ZnS Core/Shell Quantum Dots with Superior Optical Properties through Thermodynamic Shell Growth.

Epitaxial growth of a protective semiconductor shell on a colloidal quantum dot (QD) core is the key strategy for achieving high fluorescence quantum efficiency and essential stability for optoelectronic applications and biotagging with emissive QDs. Herein we investigate the effect of shell growth rate on the structure and optical properties in blue-emitting ZnSe/ZnS QDs with narrow emission line width. Tuning the precursor reactivity modifies the growth mode of ZnS shells on ZnSe cores transforming from kinetic (fast) to thermodynamic (slow) growth regimes. In the thermodynamic growth regime, enhanced fluorescence quantum yields and reduced on-off blinking are achieved. This high performance is ascribed to the effective avoidance of traps at the interface between the core and the shell, which are detrimental to the emission properties. Our study points to a general strategy to obtain high-quality core/shell QDs with enhanced optical properties through controlled reactivity yielding shell growth in the thermodynamic limit.

Semiconductor Bow-Tie Nanoantenna from Coupled Colloidal Quantum Dot Molecules.

Top-down fabricated nanoantenna architectures of both metallic and dielectric materials show powerful functionalities for Raman and fluorescence enhancement with relevance to single molecule sensing while inducing directionality of chromophore emission with implications for single photon sources. We synthesize the smallest bow-tie nanoantenna by selective tip-to-tip fusion of two tetrahedral colloidal quantum dots (CQDs) forming a dimer. While the tetrahedral monomers emit non-polarized light, the bow-tie architecture manifests nanoantenna functionality of enhanced emission polarization along the bow-tie axis, as predicted theoretically and revealed by single-particle spectroscopy. Theory also predicts the formation of an electric-field hotspot at the bow-tie epicenter. This is utilized for selective light-induced photocatalytic metal growth at that location, unlike growth on the free tips in dark conditions, thus demonstrating bow-tie dimer functionality as a photochemical reaction center.

Liposomes of Quantum Dots Configured for Passive and Active Delivery to Tumor Tissue.

The majority of developed and approved anticancer nanomedicines have been designed to exploit the dogma of the enhanced permeability and retention (EPR) effect, which is based on the leakiness of the tumor's blood vessels accompanied by impeded lymphatic drainage. However, the EPR effect has been under scrutiny recently because of its variable manifestation across tumor types and animal species and its poor translation to human cancer therapy. To facilitate the EPR effect, systemically injected NPs should overcome the obstacle of rapid recognition and elimination by the mononuclear phagocyte system (MPS). We hypothesized that circulating monocytes, major cells of the MPS that infiltrate the tumor, may serve as an alternative method for achieving increased tumor accumulation of NPs, independent of the EPR effect. We describe here the accumulation of liposomal quantum dots (LipQDs) designed for active delivery via monocytes, in comparison to LipQDs designed for passive delivery (via the EPR effect), following IV administration in a mammary carcinoma model. Hydrophilic QDs were synthesized and entrapped in functionalized liposomes, conferring passive ("stealth" NPs; PEGylated, neutral charge) and active (monocyte-mediated delivery; positively charged) properties by differing in their lipid composition, membrane PEGylation, and charge (positively, negatively, and neutrally charged). The various physicochemical parameters affecting the entrapment yield and optical stability were examined in vitro and in vivo. Biodistribution in the blood, various organs, and in the tumor was determined by the fluorescence intensity and Cd analyses. Following the treatment of animals (intact and mammary-carcinoma-bearing mice) with disparate formulations of LipQDs (differing by their lipid composition, neutrally and positively charged surfaces, and hydrophilic membrane), we demonstrate comparable tumor uptake of QDs delivered by the passive and the active routes (mainly by Ly-6Chi monocytes). Our findings suggest that entrapping QDs in nanosized liposomal formulations, prepared by a new facile method, imparts superior structural and optical stability and a suitable biodistribution profile leading to increased tumor uptake of fluorescently stable QDs.

DNA-Mediated Self-Assembly and Metallization of Semiconductor Nanorods for the Fabrication of Nanoelectronic Interfaces.

DNA nanostructures provide a powerful platform for the programmable assembly of nanomaterials. Here, this approach is extended to semiconductor nanorods that possess interesting electrical properties and could be utilized for the bottom-up fabrication of nanoelectronic building blocks. The assembly scheme is based on an efficient DNA functionalization of the nanorods. A complete coverage of the rod surface with DNA ensures a high colloidal stability while maintaining the rod size and shape. It furthermore supports the assembly of the nanorods at defined docking positions of a DNA origami platform with binding efficiencies of up to 90 % as well as the formation of nanorod dimers with defined relative orientations. By incorporating orthogonal binding sites for gold nanoparticles, defined metal-semiconductor heterostructures can be fabricated. Subsequent application of a seeded growth procedure onto the gold nanoparticles (AuNPs) allows for to establish a direct metal-semiconductor interface as a crucial basis for the integration of semiconductors in self-assembled nanoelectronic devices.

Electronic coupling in colloidal quantum dot molecules; the case of CdSe/CdS core/shell homodimers.

Coupled colloidal quantum dot molecules composed of two fused CdSe/CdS core/shell sphere monomers were recently presented. Upon fusion, the potential energy landscape changes into two quantum dots separated by a pretuned potential barrier with energetics dictated by the conduction and valence band offsets of the core/shell semiconductors and the width controlled by the shell thickness and the fusion reaction conditions. In close proximity of the two nanocrystals, orbital hybridization occurs, forming bonding and antibonding states in analogy to the hydrogen molecule. In this study, we examine theoretically the electronic and optical signatures of such a quantum dot dimer compared to its monomer core/shell building-blocks. We examine the effects of different core sizes, barrier widths, different band offsets, and neck sizes at the interface of the fused facets on the system wave-functions and energetics. Due to the higher effective mass of the hole and the large valence band offset, the hole still essentially resides in either of the cores, breaking the symmetry of the potential for the electron as well. We found that the dimer signature is well expressed in a red shift of the band gap both in absorption and emission, in slower radiative lifetimes and in an absorption cross section which is significantly enhanced relative to the monomers at energies above the shell absorption onset, while remains essentially at the same level near the band-edge. This study provides essential guidance to predesign of coupled quantum dot molecules with specific attributes which can be utilized for various new opto-electronic applications.

Charge Carrier Dynamics in Photocatalytic Hybrid Semiconductor-Metal Nanorods: Crossover from Auger Recombination to Charge Transfer.

Hybrid semiconductor-metal nanoparticles (HNPs) manifest unique, synergistic electronic and optical properties as a result of combining semiconductor and metal physics via a controlled interface. These structures can exhibit spatial charge separation across the semiconductor-metal junction upon light absorption, enabling their use as photocatalysts. The combination of the photocatalytic activity of the metal domain with the ability to generate and accommodate multiple excitons in the semiconducting domain can lead to improved photocatalytic performance because injecting multiple charge carriers into the active catalytic sites can increase the quantum yield. Herein, we show a significant metal domain size dependence of the charge carrier dynamics as well as the photocatalytic hydrogen generation efficiencies under nonlinear excitation conditions. An understanding of this size dependence allows one to control the charge carrier dynamics following the absorption of light. Using a model hybrid semiconductor-metal CdS-Au nanorod system and combining transient absorption and hydrogen evolution kinetics, we reveal faster and more efficient charge separation and transfer under multiexciton excitation conditions for large metal domains compared to small ones. Theoretical modeling uncovers a competition between the kinetics of Auger recombination and charge separation. A crossover in the dominant process from Auger recombination to charge separation as the metal domain size increases allows for effective multiexciton dissociation and harvesting in large metal domain HNPs. This was also found to lead to relative improvement of their photocatalytic activity under nonlinear excitation conditions.