Zinc-Catalyzed Cyclization of Alkynyl Derivatives: Substrate Scope and Mechanistic Insights.

Novel alkyl zinc complexes supported by acetamidate/thioacetamidate heteroscorpionate ligands have been successfully synthesized and characterized. These complexes exhibited different coordination modes depending on the electronic and steric effects of the acetamidate/thioacetamidate moiety. Their catalytic activity has been tested toward the hydroelementation reactions of alkynyl alcohol/acid substrates, affording the corresponding enol ether/unsaturated lactone products under mild reaction conditions. Kinetic studies have been performed and confirmed that reactions are first-order in [catalyst] and zero-order in [alkynyl substrate]. DFT calculations supported a reaction mechanism through the formation of the catalytically active species, an alkoxide-zinc intermediate, by a protonolysis reaction of the Zn-alkyl bond with the alcohol group of the substrate. Based on the experimental and theoretical results, a catalytic cycle has been proposed.

Development of Heterobimetallic Al/Mg Complexes for the Very Rapid Ring-Opening Polymerization of Lactides.

The successful architecture of active catalytic species with enhanced efficiencies is critical for the optimal exploitation of sustainable resources in industrially demanded processes. In this work, we describe the preparation of novel helical heterobimetallic Al/Mg-based complexes of the type [AlMe2(pbpamd-)MgR{κ1-O-(OC4H8O)}] [R = Et (1a), tBu (2a)] as potential catalysts. The design was performed through the sequential addition of the Al fragment to the ligand, followed by the Mg platform, resulting in a planar π-C2N2(sp2)-Al/Mg bridging core between metals. The new heterobimetallic species have been unambiguously characterized by single-crystal X-ray analysis. NOESY, DOSY, and EXSY NMR studies as well as density functional theory calculations corroborate both a rearrangement in solution to scorpionate complexes containing an unprecedented apical carbanion with a direct σ-C(sp3)-Al covalent bond named [{Mg(R)(pbpamd-) Al(Me)2}] [R = Et (1b), tBu (2b)] and an interconversion equilibrium between both isomers. We verified their utility and high efficiency as catalysts in the well-controlled ring-opening polymerization of the biorenewable l- and rac-lactide (LA) at 23 °C, reaching a remarkable turnover frequency value close to 25000 h-1 for rac-LA at this temperature and exerting a significant level of heteroselectivity (Pr = 0.80). Very interestingly, the kinetics demonstrate apparent first-order with respect to the catalyst and LA, which supports a synergic intramolecular cooperation between centers with electronic modulation among them.

Zinc-Catalyzed Hydroalkoxylation/Cyclization of Alkynyl Alcohols.

Despite the great interest in zinc catalysis for hydroelementation reactions, the use of zinc complexes as catalysts for the hydroalkoxylation of alkynyl alcohols has not been reported to date. Scorpionate zinc complexes have been successfully designed as precatalysts for the hydroalkoxylation reaction of alkynyl alcohols under mild reaction conditions. Zinc amide complex 8 has been shown to be an excellent precatalyst for the highly selective intramolecular hydroalkoxylation process to yield the corresponding exocyclic enol ethers. Kinetic studies have been performed and confirmed that reactions are first-order in [catalyst] and zero-order in [alkynyl alcohol]. NMR spectroscopy and X-ray diffraction analysis provided evidence for the formation of an alkynyl zinc compound which has been shown to be a key intermediate in the hydroalkoxylation process. On the basis of the experimental results, a catalytic cycle is proposed.

NNC-Scorpionate Zirconium-Based Bicomponent Systems for the Efficient CO2 Fixation into a Variety of Cyclic Carbonates.

Two new derivatives of the bis(3,5-dimethylpyrazol-1-yl)methane modified by introduction of organosilyl groups on the central carbon atom, one of which bearing a chiral fragment, have been easily prepared. We verified the potential utility of these compounds through the reaction with [Zr(NMe2)4] for the preparation of novel zirconium complexes in which an ancillary bis(pyrazol-1-yl)methanide acts as a robust monoanionic tridentate scorpionate in a κ3-NNC chelating mode, forming strained four-membered heterometallacycles. These κ3-NNC-scorpionate zirconium amides were investigated as catalysts in combination with tetra-n-butylammonium bromide as cocatalyst for CO2 fixation into five-membered cyclic carbonate products. The study has led to the development of an efficient zirconium-based bicomponent system for the selective cycloaddition reaction of CO2 with epoxides. Kinetics investigations confirmed apparent first-order dependence on the catalyst and cocatalyst concentrations. In addition, this system displays very broad substrate scope, including mono- and disubstituted substrates, as well as the challenging biorenewable terpene derived limonene oxide, under mild and solvent-free conditions.

Organo-Aluminum and Zinc Acetamidinates: Preparation, Coordination Ability, and Ring-Opening Polymerization Processes of Cyclic Esters.

The reaction of the highly sterically demanding NNN'-heteroscorpionate protioligands pbptamd-H, tbptamd-H, and phbptamd-H (a) and the low sterically hindered analogs pbpamd-H, tbpamd-H, and phbpamd-H (b), with 1 equiv of AlR3 (R = Me, Et) proceed in high yields to give two families of complexes: the mononuclear dialkyl aluminum bidentate-acetamidinates [AlR2(κ2- N' N')] (κ2- N' N' = pbptamd, R = Me 1, Et 2; tbptamd, R = Me 3, Et 4; phbptamd, R = Me 5, Et 6) and the monodentate-acetamidinates [AlR2(κ2- NN')] (κ2- NN' = tbpamd, R = Me 7; phbpamd, R = Me 8, Et 9). In complexes 7-9, the presence of two possible CH-NH tautomers as low extended π-N-C-N'(sp2)-Al and high extended π-HN-C2-N'(sp2)-Al complexes, respectively, could be identified. Moreover, the reaction of aluminum dimethyls 7 and 8 with ZnMe2 afforded the isolation of the more stable scorpionate zinc monoalkyls [Zn(Me)(κ3- NNN')] ( NNN' = tbpamd 10 and phbpamd 11), through a very unusual ligand exchange process, involving a zinc-to-aluminum transmetalation of an alkyl group. The X-ray crystal structures of 1, 3, 7, and 8, as well as that of 11, confirmed unambiguously the different κ2-arrangements proposed for bi- or monodentate acetamidinate dialkyls 1-6 and 7-9, respectively, the presence of NH tautomer in 7 and 8, and a κ3- NNN' coordination in monoalkyl 11. Density functional theory calculations were used to explore the three different favored κ2-arrangements found in acetamidinate aluminum dialkyls 1-9, the relative stability of both CH-NH tautomers, and the ligand transfer reaction leading to the formation of κ3- NNN' zinc monoalkyls 10 and 11. Interestingly, dialkyls 1, 5, 7, and 8 can act as highly efficient single-component living initiators for the ring-opening polymerization of ε-caprolactone and rac-lactide in mild conditions after hours. These initiators efficiently mediated the immortal polymerization in the presence of excess of benzyl alcohol (up to 20 equiv), as evidenced by the narrow dispersity values and the good agreement between the experimental Mn values and monomer/benzyl alcohol ratios. In addition, the most sterically hindered initiator, 5, exhibits enhanced levels of heteroselectivity on the produced PLAs, reaching Ps values up to 0.70.

Single-centre study of 628 adult, primary kidney transplant recipients showing no unfavourable effect of new-onset diabetes after transplant.

AIMS/HYPOTHESIS: To better understand the implications of new-onset diabetes after transplant (NODAT), we used our prospectively followed cohort of 628 adult primary kidney transplant recipients to determine the prognostic impact of pretransplant diabetes and NODAT. METHODS: The study cohort consisted of all participants in four randomised immunosuppression trials performed at our centre since May 2000. For each cause-specific hazard analysed, Cox stepwise regression was used to determine a multivariable model of significant baseline predictors; the multivariable influence of having pretransplant diabetes and NODAT (t) (the latter defined as a zero-one, time-dependent covariate) was subsequently tested. Similar analyses of estimated glomerular filtration rate (eGFR) at 36 and 60 months post transplant were performed using stepwise linear regression. Finally, a repeated measures analysis of mean HbA1c as a function of diabetes category (pretransplant diabetes vs NODAT) and randomised trial (first to fourth) was performed. RESULTS: Median follow-up was 56 months post transplant. Patients with pretransplant diabetes comprised 23.4% (147/628), and 22.5% (108/481) of the remaining patients developed NODAT. Pretransplant diabetes had no prognostic influence on first biopsy-proven acute rejection and death-censored graft failure hazard rates, nor on eGFR, but was associated with significantly higher rates of death with a functioning graft (DWFG) (p = 0.003), DWFG due to a cardiovascular event (p = 0.005) and infection that required hospitalisation (p = 0.03). NODAT (t) had no unfavourable impact on any of these hazard rates nor on eGFR, with actuarial freedom from DWFG remaining at over 90% among patients in pre- and post-NODAT states at 72 months post transplant/NODAT. Mean HbA1c for patients in the first to fourth randomised trials, averaged across diabetes category, decreased by trial (7.28%, 6.92%, 6.87% and 6.64% [56.1, 52.1, 51.6 and 49.1 mmol/mol], respectively; p = 0.02). CONCLUSIONS/INTERPRETATION: Less-than-expected post-NODAT risk for graft loss and death may exist in the current climate of tighter glucose monitoring post transplant.

Multivariable risk of developing new onset diabetes after transplant-results from a single-center study of 481 adult, primary kidney transplant recipients.

BACKGROUND: Understanding the relative contributions of baseline demographics and immunosuppressive therapy on NODAT risk may help in developing preventive strategies. METHODS: Using our prospectively followed cohort of 481 adult, primary kidney transplant recipients without pre-transplant diabetes, we determined the significant baseline predictors for the hazard rate of developing NODAT via Cox stepwise regression. The multivariable influence of first BPAR (defined as a time-dependent covariate) was also tested. RESULTS: Median follow-up was 57 mo post-transplant; the overall percentage who developed NODAT was 22.5% (108/481). Four baseline predictors of a greater NODAT hazard rate were found (by order of selection): higher BMI (p < 0.000001), planned maintenance with SRL (p = 0.0003), non-white recipient (p = 0.0004), and older recipient age (p = 0.0004). Approximately one-half of the 106 patients in the highest demographic risk category (BMI ≥25 kg/m(2) , non-white race, and age at transplant ≥40 yr) developed NODAT; actuarial NODAT risk ranged from 10% to 30% in the lower demographic risk categories. First BPAR was also associated with significantly higher NODAT in multivariable analysis (p = 0.02)-the highly elevated NODAT rate observed during the first few months post-transplant and following first BPAR appears to demonstrate the diabetogenic effect of using high-dose (intravenous) corticosteroids. CONCLUSIONS: The disturbingly high NODAT rate found among patients having multiple demographic risk factors is still an important problem that awaits a better solution.

Heteroscorpionate magnesium alkyls bearing unprecedented apical σ-C(sp3)-mg bonds: heteroselective ring-opening polymerization of rac-lactide.

The previously described reaction of the low sterically hindered heteroscorpionate lithium acetamidinates [Li(κ(3)-pbpamd)(THF)] and [Li(κ(3)-tbpamd)(THF)] with a series of commercially available Grignard reagents RMgCl in an equimolecular ratio yielded the magnesium monoalkyls [Mg(R)(κ(3)-NNN)] (NNN = pbpamd, R = CH2SiMe3, Et (1), Bn (2); NNN = tbpamd, R = CH2SiMe3, Et (3), Bn (4)). However, subsequent reaction of these monoalkyls [Mg(R)(κ(3)-NNN)] with two additional equivalents of the same RMgCl in tetrahydrofuran gave rise to dinuclear dialkyls of the type [RMg(κ(3)-N,N,N;κ(2)-C,N)MgR(thf)] (κ(3)-N,N,N;κ(2)-C,N = pbpamd(-), R = CH2SiMe3 (5), Et (6); κ(3)-N,N,N;κ(2)-C,N = tbpamd(-), R = CH2SiMe3 (7), Et (8)). Furthermore, when the reaction was carried out in a mixture of tetrahydrofuran/dioxane with the same stoichiometry, a new family of tetranuclear tetraalkyl magnesium complexes [{RMg(κ(3)-N,N,N;κ(2)-C,N)MgR}2{µ-O,O-(C4H8)}] (κ(3)-N,N,N;κ(2)-C,N = pbpamd(-), R = CH2SiMe3 (9), Et (10), Bn (11); κ(3)-N,N,N;κ(2)-C,N = tbpamd(-), R = CH2SiMe3 (12), Et (13), Bn (14)) was obtained. In both families, an apical methine C-H activation process on the heteroscorpionate takes place. The single-crystal X-ray structures of 4, 8, 9, and 12 confirm the nuclearity of each family, with 4-coordinative arrangements for all magnesium atoms. More importantly, the presence in the di- and tetranuclear complexes of unprecedented apical carbanions with a direct σ-C(sp(3))-Mg covalent bond, and as a result, the existence of stereogenic magnesium centers, have been unambiguously confirmed. Interestingly, the dinuclear dialkyls 5 and 7, as well as the tetranuclear tetraalkyls 9, 10, and 12, can act as highly efficient single-component living initiators for the ring-opening polymerization of ε-caprolactone and lactides. Lactide (LA) polymerizations afforded polylactide (PLA) materials with medium molecular weights in only a few minutes even at 20 °C for L-LA and in a few hours at 50 °C for rac-LA propagations. More importantly, microstructural analysis of the poly(rac-lactide) materials revealed that the tetranuclear tetra-alkyl 12 exerts enhanced levels of heteroselectivity on the PLAs under mild conditions, with Ps values up to 0.78.

Very efficient organo-zinc scorpionates for CO2 fixation into a variety of cyclic carbonates: synthesis, coordination ability and catalytic studies.

The fixation of CO2 mediated by metal-based catalysts for the production of organic molecules of industrial interest such as cyclic carbonates is urgently required under green and eco-friendly conditions. Herein, we describe the easy preparation of sterically demanding scorpionate ligands bearing different electron-withdrawing groups, and their coordination ability for the preparation of robust zinc-based mononuclear complexes of the type [ZnMe(κ3-NNN')] (4-6). These complexes, in combination with co-catalysts comprising larger ionic radius-based halides such as tetra-n-butylammonium, functioned as very active and selective catalysts for CO2 fixation into five-membered cyclic carbonates. These studies have led to the development of sustainable, inexpensive, and low-toxicity systems formed by 4-5 and Bu4NBr for the cycloaddition of CO2 into epoxides under very mild and solvent-free conditions, reaching very good to excellent conversions (TOF = 260 h-1). Moreover, these bicomponent systems show a broad substrate scope and functional group tolerance, including mono- and di-substituted epoxides, as well as bio-renewable diepoxides. Very interestingly, these are the first zinc-based systems reported to date for the successful transformation of the very challenging tri-substituted terpene-derived cis/trans-limonene oxide, whose reaction proceeds with high stereoselectivity to the formation of the bicyclic trans-limonene carbonate. Additionally, these bicomponents can be efficiently used up to six times without significant loss of activity. Kinetic investigations confirmed that the reaction shows an apparent first-order dependence on the catalyst and co-catalyst concentrations, which indicates an intramolecular monometallic mechanism.

One-pot terpolymerization of CHO, CO2 and L-lactide using chloride indium catalysts.

Ring-opening copolymerization reactions of epoxides, carbon dioxide and cyclic esters to produce copolymers is a promising strategy to prepare CO2-based polymeric materials. In this contribution, bimetallic chloride indium complexes have been developed as catalysts for the copolymerization processes of cyclohexene oxide, carbon dioxide and L-lactide under mild reaction conditions. The catalysts displayed good catalytic activity and excellent selectivity towards the preparation of poly(cyclohexene carbonate) (PCHC) at one bar CO2 pressure in the absence of a co-catalyst. Additionally, polyester-polycarbonate copolymers poly(lactide-co-cyclohexene carbonate) (PLA-co-PCHC) were obtained via an one-pot one-step route without the use of a co-catalyst. The degree of incorporation of carbon dioxide can be easily modulated by changing the CO2 pressure and the monomer feed, resulting in copolymers with different thermal properties.

High-speed identification of suspended carbon nanotubes using Raman spectroscopy and deep learning.

The identification of nanomaterials with the properties required for energy-efficient electronic systems is usually a tedious human task. A workflow to rapidly localize and characterize nanomaterials at the various stages of their integration into large-scale fabrication processes is essential for quality control and, ultimately, their industrial adoption. In this work, we develop a high-throughput approach to rapidly identify suspended carbon nanotubes (CNTs) by using high-speed Raman imaging and deep learning analysis. Even for Raman spectra with extremely low signal-to-noise ratios (SNRs) of 0.9, we achieve a classification accuracy that exceeds 90%, while it reaches 98% for an SNR of 2.2. By applying a threshold on the output of the softmax layer of an optimized convolutional neural network (CNN), we further increase the accuracy of the classification. Moreover, we propose an optimized Raman scanning strategy to minimize the acquisition time while simultaneously identifying the position, amount, and metallicity of CNTs on each sample. Our approach can readily be extended to other types of nanomaterials and has the potential to be integrated into a production line to monitor the quality and properties of nanomaterials during fabrication.

Synthesis of Nonisocyanate Poly(hydroxy)urethanes from Bis(cyclic carbonates) and Polyamines.

Nonisocyanate polyurethane materials with pending alcohol groups in the polymeric chain were synthesized by polyaddition reaction of bis(cyclic carbonates) onto diamines. For the platform molecule, 1,4-butanediol bis(glycidyl ether carbonate) (BGBC, 1) was used. The polyaddition reaction of 1 onto a wide range of diamines with different electronic and physical properties was explored. All PHUs were obtained quantitatively after 16 h at 80 °C temperature in MeCN as solvent. The low nucleophilicity of L-lysine has proven unable to ring-open the cyclic carbonate and, thus, no reaction occurred. The addition of DBU or TBD as the catalyst was tested and allows the obtention of the desired PHU. However, the presence of strong bases also led to the formation of polyurea fragments in the new PHU. The different poly(hydroxyurethane) materials were characterized using a wide range of spectroscopic techniques such as NMR, IR, MALDI-ToF, and using GPC studies. The thermal properties of the NIPUs were investigated by DSC and TGA analyses. Moreover, reactions employing different monomer ratios were performed, obtaining novel hydroxycarbamate compounds. Finally, sequential and one-pot experiments were also carried out to synthesize the PHUs polymers in one-step reaction.

Direct synthesis of NNN-donor enantiopure scorpionate ligands by an efficient diastereoselective nucleophilic addition to imines.

New enantiopure imines (1-9) with a chiral substrate to control the stereochemistry of a newly created stereogenic center have been synthesized by reaction of the commercially available (1R)-(-)-myrtenal and different primary amines. The diastereomerically enriched lithium-scorpionate compounds [Li(κ(3)-mobpza)(THF)] (10) (mobpza = N-p-methylphenyl-(1R and 1S)-1-[(1R)-6,6-dimethylbicyclo[3.1.1]-2-hepten-2-yl]-2,2-bis(3,5-dimethylpyrazol-1-yl)ethylamide), [Li(κ(3)-mobpza)(THF)] (11) (mobpza = N-p-methoxyphenyl-(1R and 1S)-1-[(1R)-6,6-dimethylbicyclo[3.1.1]-2-hepten-2-yl]-2,2-bis(3,5-dimethylpyrazol-1-yl)ethylamide), [Li(κ(3)-fbpza)(THF)] (12) (fbpza = N-p-fluorophenyl-(1R and 1S)-1-[(1R)-6,6-dimethylbicyclo[3.1.1]-2-hepten-2-yl]-2,2-bis(3,5-dimethylpyrazol-1-yl)ethylamide), and [Li(κ(3)-clbpza)(THF)] (13) (clbpza = N-p-chlorophenyl-(1R and 1S)-1-[(1R)-6,6-dimethylbicyclo[3.1.1]-2-hepten-2-yl]-2,2-bis(3,5-dimethylpyrazol-1-yl)ethylamide) were obtained by a diastereoselective 1,2-addition of an organolithium reagent to imines in good yield and with good diastereomeric excess (ca. 80%). The complexes [LiCl(κ(2)-R,R-fbpzaH)(THF)] (14) and [LiCl(κ(2)-R,R-clbpzaH)(THF)] (15) were obtained in enantiomerically pure form by the treatment of THF solutions of 12 or 13 with NH(4)Cl. The enantiomerically pure amines (R,R-mbpzaH) (16), (R,R-mobpzaH) (17), (R,R-fbpzaH) (18), and (R,R-clbpzaH) (19) were obtained by hydrolysis of the lithium-scorpionate compounds 10-13 with H(2)O. The lithium compound 12 was reacted with [TiCl(4)(THF)(2)] or [ZrCl(4)] to give the enantiopure complexes [MCl(3)(κ(3)-R,R-fbpza)] [M = Ti (20), Zr (21)]. The amine compound 18 reacted with [MX(4)] (M = Ti, X = O(i)Pr, OEt; M = Zr; X = NMe(2)) to give the complexes [MX(3)(κ(3)-R,R-fbpza)] (22-24). The reaction of Me(3)SiCl with [Zr(NMe(2))(3)(κ(3)-R,R-fbpza)] (24) in different molar ratios led to the halide-amide-containing complexes [ZrCl(NMe(2))(2)(κ(3)-R,R-fbpza)] (25) and [ZrCl(2)(NMe(2))(κ(3)-R,R-fbpza)] (26) and the halide complex 21. The isolation of only one of the three possible diastereoisomers of complexes 25 and 26 revealed that chiral induction from the ligand to the zirconium center took place. The structures of these compounds were elucidated by (1)H and (13)C{(1)H} NMR spectroscopy, and the X-ray crystal structures of 5, 12, 14, 15, and 24 were also established.

Efficient Bulky Organo-Zinc Scorpionates for the Stereoselective Production of Poly(rac-lactide)s.

The direct reaction of the highly sterically demanding acetamidinate-based NNN'-scorpionate protioligand Hphbptamd [Hphbptamd = N,N'-di-p-tolylbis(3,5-di-tertbutylpyrazole-1-yl)acetamidine] with one equiv. of ZnMe2 proceeds in high yield to the mononuclear alkyl zinc complex [ZnMe(κ3-phbptamd)] (1). Alternatively, the treatment of the corresponding lithium precursor [Li(phbptamd)(THF)] with ZnCl2 yielded the halide complex [ZnCl(κ3-phbptamd)] (2). The X-ray crystal structure of 1 confirmed unambiguously a mononuclear entity in these complexes, with the zinc centre arranged with a pseudotetrahedral environment and the scorpionate ligand in a κ3-coordination mode. Interestingly, the inexpensive, low-toxic and easily prepared complexes 1 and 2 resulted in highly efficient catalysts for the ring-opening polymerisation of lactides, a sustainable bio-resourced process industrially demanded. Thus, complex 1 behaved as a single-component robust initiator for the living and immortal ROP of rac-lactide under very mild conditions after a few hours, reaching a TOF value up to 5520 h-1 under bulk conditions. Preliminary kinetic studies revealed apparent zero-order dependence on monomer concentration in the absence of a cocatalyst. The PLA materials produced exhibited narrow dispersity values, good agreement between the experimental Mn values and monomer/benzyl alcohol ratios, as well as enhanced levels of heteroselectivity, reaching Ps values up to 0.74.

Plasma-enhanced modification of polysaccharides for wastewater treatment: A review.

In this work, novel polysaccharide-based sorbents modified with plasma technologies are discussed. Plasma selectively modifies the surface properties by generating specific moieties, enhancing adsorption performance, and the physical-chemical properties of the material without modifying its bulk properties. Among plasma technologies, cold plasma is more suitable and energy-efficient, since thermal-sensitive materials could be modified using this technology. Besides, atmospheric-pressure plasma systems possess the required features to scale-up plasma technologies for surface modification of sorbents. Moreover, a big challenge is the semi-continuous operation to modify sorbents as it would decrease overall process costs. Due to its low-cost and extensive availability, polysaccharide-based sorbents are promising substrates for plasma-enhanced modification to develop highly efficient adsorbents. The development of polysaccharide-based materials includes modified cellulose, chitosan, or lignocellulosic materials with functionalities that increase adsorption capacity and selectivity towards a specific organic or inorganic pollutant.

Ring-Opening Copolymerization of Cyclohexene Oxide and Cyclic Anhydrides Catalyzed by Bimetallic Scorpionate Zinc Catalysts.

The catalytic activity and high selectivity reported by bimetallic heteroscorpionate acetate zinc complexes in ring-opening copolymerization (ROCOP) reactions involving CO2 as substrate encouraged us to expand their use as catalysts for ROCOP of cyclohexene oxide (CHO) and cyclic anhydrides. Among the catalysts tested for the ROCOP of CHO and phthalic anhydride at different reaction conditions, the most active catalytic system was the combination of complex 3 with bis(triphenylphosphine)iminium as cocatalyst in toluene at 80 °C. Once the optimal catalytic system was determined, the scope in terms of other cyclic anhydrides was broadened. The catalytic system was capable of copolymerizing selectively and efficiently CHO with phthalic, maleic, succinic and naphthalic anhydrides to afford the corresponding polyester materials. The polyesters obtained were characterized by spectroscopic, spectrometric, and calorimetric techniques. Finally, the reaction mechanism of the catalytic system was proposed based on stoichiometric reactions.

Efficient Synthesis of Cyclic Carbonates from Unsaturated Acids and Carbon Dioxide and their Application in the Synthesis of Biobased Polyurethanes.

Bio-derived furan- and diacid-derived cyclic carbonates have been synthesized in high yields from terminal epoxides and CO2 . Furthermore, four highly substituted terpene-derived cyclic carbonates were isolated in good yields with excellent diastereoselectivity in some cases. Eleven new cyclic carbonates derived from 10-undecenoic acid under mild reaction conditions were prepared, providing the corresponding carbonate products in excellent yields. The catalyst system also performed the conversion of an epoxidized fatty acid n-pentyl ester into a cyclic carbonate under relatively mild reaction conditions (80 °C, 20 bar, 24 h). This bis(cyclic carbonate) was obtained in high yields and with different cis/trans ratios depending on the co-catalyst used. An allyl alcohol by-product was only observed as a minor product when bis(triphenylphosphine)iminium chloride was used as co-catalyst. Finally, two cyclic carbonates were used as building blocks for the preparation of non-isocyanate poly(hydroxy)urethanes by reaction with 1,4-diaminobutane.

Hybrid scorpionate/cyclopentadienyl magnesium and zinc complexes: synthesis, coordination chemistry, and ring-opening polymerization studies on cyclic esters.

The reaction of the hybrid scorpionate/cyclopentadienyl lithium salt [Li(bpzcp)(THF)] [bpzcp = 2,2-bis(3,5-dimethylpyrazol-1-yl)-1,1-diphenylethylcyclopentadienyl] with 1 equiv of RMgCl proceeds cleanly to give very high yields of the corresponding monoalkyl kappa(2)-NN-eta(5)-C(5)H(4) magnesium complexes [Mg(R)(kappa(2)-eta(5)-bpzcp)] (R = Me 1, Et 2, (n)Bu 3, (t)Bu 4, CH(2)SiMe(3) 5, CH(2)Ph 6). Hydrolysis of the hybrid lithium salt [Li(bpzcp)(THF)] with NH(4)Cl/H(2)O in ether cleanly affords the two previously described regioisomers: (bpzcpH) 1-[2,2-bis(3,5-dimethylpyrazol-1-yl)-1,1-diphenylethyl]-1,3-cyclopentadiene (a) and 2-[2,2-bis(3,5-dimethylpyrazol-1-yl)-1,1-diphenylethyl]-1,3-cyclopentadiene (b). Subsequent reaction of the bpzcpH hybrid ligand with ZnR(2) quantitatively yields the monoalkyl kappa(2)-NN-eta(1)(pi)-C(5)H(4) zinc complexes [Zn(R){kappa(2)-eta(1)(pi)-bpzcp}] (R = Me 7, Et 8, (t)Bu 9, CH(2)SiMe(3) 10). Additionally, magnesium alkyls 1, 2, 4, and 5 can act as excellent cyclopentadienyl and alkyl transfers to the zinc metal center and yield zinc alkyls 7-10 in good yields. The single-crystal X-ray structures of the derivatives 4, 5, 7, and 10 confirm a 4-coordinative structure with the metal center in a distorted tetrahedral geometry. Interestingly, whereas alkyl magnesium derivatives 4 and 5 present a eta(5) coordination mode for the cyclopentadienyl fragment, zinc derivatives 7 and 10 feature a peripheral eta(1)(pi) arrangement in the solid state. Furthermore, the reaction of the hybrid lithium salt [Li(bpzcp)(THF)] with 1 equiv of ZnCl(2) in tetrahydrofuran (THF) affords very high yields of the chloride complex [ZnCl{kappa(2)-eta(1)(pi)-bpzcp}] (11). Compound 11 was used as a convenient starting material for the synthesis of the aromatic amide zinc compound [Zn(NH-4-MeC(6)H(4)){kappa(2)-eta(1)(pi)-bpzcp}] (12), by reaction with the corresponding aromatic primary amide lithium salt. Alternatively, aliphatic amide and alkoxide derivatives were only accessible by protonolysis of the bis(amide) complexes [M{N(SiMe(3))(2)}(2)] (M = Mg, Zn) and the mixed ligand complex [EtZnOAr)] with the hybrid ligand bpzcpH to afford [Zn(R){kappa(2)-eta(1)(pi)-bpzcp}] (R = N(SiMe(3))(2) 13, R = 2,4,6-Me(3)C(6)H(2)O 14) and [Mg{N(SiMe(3))(2)}(kappa(2)-eta(5)-bpzcp)] (15). Finally, alkyl and alkoxide-containing complexes 1-10 and 14 can act as highly effective single-component living initiators for the ring-opening polymerization of epsilon-caprolactone and lactides over a wide range of temperatures. Epsilon-caprolactone is polymerized within minutes to give high molecular weight polymers with medium-broad polydispersities (M(n) > 10(5), M(w)/M(n) = 1.45). Lactide afforded poly(lactide) materials with medium molecular weights and polydispersities as narrow as M(w)/M(n) = 1.02. Additionally, polymerization of L-lactide occurred without racemization in the propagation process and offered highly crystalline, isotactic poly(L-lactides) with very high melting temperatures (T(m) = 165 degrees C). Microstructural analysis of poly(rac-lactide) by (1)H NMR spectroscopy revealed that propagations occur without appreciable levels of stereoselectivity. Polymer end group analysis showed that the polymerization process is initiated by alkyl transfer to the monomer.

Efficient Production of Poly(Cyclohexene Carbonate) via ROCOP of Cyclohexene Oxide and CO2 Mediated by NNO-Scorpionate Zinc Complexes.

New mono- and dinuclear chiral alkoxide/thioalkoxide NNO-scorpinate zinc complexes were easily synthesized in very high yields, and characterized by spectroscopic methods. X-ray diffraction analysis unambiguously confirmed the different nuclearity of the new complexes as well as the variety of coordination modes of the scorpionate ligands. Scorpionate zinc complexes 2, 4 and 6 were assessed as catalysts for polycarbonate production from epoxide and carbon dioxide with no need for a co-catalyst or activator under mild conditions. Interestingly, at 70 °C, 10 bar of CO2 pressure and 1 mol % of loading, the dinuclear thioaryloxide [Zn(bpzaepe)2{Zn(SAr)2}] (4) behaves as an efficient and selective one-component initiator for the synthesis of poly(cyclohexene carbonate) via ring-opening copolymerization of cyclohexene oxide (CHO) and CO2, affording polycarbonate materials with narrow dispersity values.

On the search for NNO-donor enantiopure scorpionate ligands and their coordination to group 4 metals.

The preparation of new chiral bis(pyrazol-1-yl)methane-based NNO-donor scorpionate ligands in the form of the lithium derivatives [Li(bpzb)(THF)] [1; bpzb = 1,1-bis(3,5-dimethylpyrazol-1-yl)-3,3-dimethyl-2-butoxide] and [Li(bpzte)(THF)] [2; bpzte = 2,2-bis(3,5-dimethylpyrazol-1-yl)-1-p-tolylethoxide] or the alcohol ligands (bpzbH) (3) and (bpzteH) (4) has been carried out by 1,2-addition reactions with trimethylacetaldehyde or p-tolualdehyde. The separation of a racemic mixture of the alcohol ligand 3 has been achieved and gave an enantiopure NNO alcohol-scorpionate ligand in three synthetic steps: (i) 1,2-addition of the appropriate lithium derivative to trimethylacetaldehyde, (ii) esterification and separation of diastereoisomers 5, (iii) saponification. Subsequently, the enantiopure scorpionate ligand (R,R)-bpzmmH {6; R,R-bpzmmH = (1R)-1-[(1R)-6,6-dimethylbicyclo[3.1.1]2-hepten-2-yl]-2,2-bis(3,5-dimethylpyrazol-1-yl)ethanol} was obtained with an excellent diastereomeric excess (>99% de) in a one-pot process utilizing the aldehyde (1R)-(-)-myrtenal as a chiral substrate to control the stereochemistry of the newly created asymmetric center. These new chiral heteroscorpionate ligands reacted with [MX(4)] (M = Ti, Zr; X = NMe(2), O(i)Pr, OEt, O(t)Bu) in a 1:1 molar ratio in toluene to give, after the appropriate workup, the complexes [MX(3)(kappa(3)-NNO)] (7-18). The reaction of Me(3)SiCl with [Ti(NMe(2))(3)(bpzb)] (7) or [Ti(NMe(2))(3)(R,R-bpzmm)] (11) in different molar ratios gave the halide-amide-containing complexes [TiCl(NMe(2))(2)(kappa(3)-NNO)] (19 and 20) and [TiCl(2)(NMe(2))(kappa(3)-NNO)] (21 and 22) and the halide complex [TiCl(3)(kappa(3)-NNO)] (23 and 24). The latter complexes can also be obtained by reaction of the lithium compound 1 with TiCl(4)(THF)(2) and deprotonation of the alcohol group of 6 with NaH, followed by reaction with TiCl(4)(THF)(2) in a 1:1 molar ratio, respectively. Isolation of only one of the three possible diastereoisomers of the complexes 19 and 22 revealed that chiral induction from the ligand to the titanium center took place. The structures of these complexes were elucidated by (1)H and (13)C{(1)H} NMR spectroscopy, and the X-ray crystal structures of 3-7, 12, and 24 were also established. Finally, we evaluated the influence that the chiral center of the new heteroscorpionate complexes has on the enantioselectivity of the asymmetric epoxidation of allylic alcohols.