Vaccination in a humanized mouse model elicits highly protective PfCSP-targeting anti-malarial antibodies.

Repeat antigens, such as the Plasmodium falciparum circumsporozoite protein (PfCSP), use both sequence degeneracy and structural diversity to evade the immune response. A few PfCSP-directed antibodies have been identified that are effective at preventing malaria infection, including CIS43, but how these repeat-targeting antibodies might be improved has been unclear. Here, we engineered a humanized mouse model in which B cells expressed inferred human germline CIS43 (iGL-CIS43) B cell receptors and used both vaccination and bioinformatic analysis to obtain variant CIS43 antibodies with improved protective capacity. One such antibody, iGL-CIS43.D3, was significantly more potent than the current best-in-class PfCSP-directed antibody. We found that vaccination with a junctional epitope peptide was more effective than full-length PfCSP at recruiting iGL-CIS43 B cells to germinal centers. Structure-function analysis revealed multiple somatic hypermutations that combinatorically improved protection. This mouse model can thus be used to understand vaccine immunogens and to develop highly potent anti-malarial antibodies.

Protective effects of combining monoclonal antibodies and vaccines against the Plasmodium falciparum circumsporozoite protein.

Combinations of monoclonal antibodies (mAbs) against different epitopes on the same antigen synergistically neutralize many viruses. However, there are limited studies assessing whether combining human mAbs against distinct regions of the Plasmodium falciparum (Pf) circumsporozoite protein (CSP) enhances in vivo protection against malaria compared to each mAb alone or whether passive transfer of PfCSP mAbs would improve protection following vaccination against PfCSP. Here, we isolated a panel of human mAbs against the subdominant C-terminal domain of PfCSP (C-CSP) from a volunteer immunized with radiation-attenuated Pf sporozoites. These C-CSP-specific mAbs had limited binding to sporozoites in vitro that was increased by combination with neutralizing human "repeat" mAbs against the NPDP/NVDP/NANP tetrapeptides in the central repeat region of PfCSP. Nevertheless, passive transfer of repeat- and C-CSP-specific mAb combinations did not provide enhanced protection against in vivo sporozoite challenge compared to repeat mAbs alone. Furthermore, combining potent repeat-specific mAbs (CIS43, L9, and 317) that respectively target the three tetrapeptides (NPDP/NVDP/NANP) did not provide additional protection against in vivo sporozoite challenge. However, administration of either CIS43, L9, or 317 (but not C-CSP-specific mAbs) to mice that had been immunized with R21, a PfCSP-based virus-like particle vaccine that induces polyclonal antibodies against the repeat region and C-CSP, provided enhanced protection against sporozoite challenge when compared to vaccine or mAbs alone. Collectively, this study shows that while combining mAbs against the repeat and C-terminal regions of PfCSP provide no additional protection in vivo, repeat mAbs do provide increased protection when combined with vaccine-induced polyclonal antibodies. These data should inform the implementation of PfCSP human mAbs alone or following vaccination to prevent malaria infection.

Aedes aegypti SGS1 is critical for Plasmodium gallinaceum infection of both the mosquito midgut and salivary glands.

BACKGROUND: The invasion of the mosquito salivary glands by Plasmodium sporozoites is a critical step that defines the success of malaria transmission and a detailed understanding of the molecules responsible for salivary gland invasion could be leveraged towards control of vector-borne pathogens. Antibodies directed against the mosquito salivary gland protein SGS1 have been shown to reduce Plasmodium gallinaceum sporozoite invasion of Aedes aegypti salivary glands, but the specific role of this protein in sporozoite invasion and in other stages of the Plasmodium life cycle remains unknown. METHODS: RNA interference and CRISPR/Cas9 were used to evaluate the role of A. aegypti SGS1 in the P. gallinaceum life cycle. RESULTS: Knockdown and knockout of SGS1 disrupted sporozoite invasion of the salivary gland. Interestingly, mosquitoes lacking SGS1 also displayed fewer oocysts. Proteomic analyses confirmed the abolishment of SGS1 in the salivary gland of SGS1 knockout mosquitoes and revealed that the C-terminus of the protein is absent in the salivary gland of control mosquitoes. In silico analyses indicated that SGS1 contains two potential internal cleavage sites and thus might generate three proteins. CONCLUSION: SGS1 facilitates, but is not essential for, invasion of A. aegypti salivary glands by P. gallinaceum and has a dual role as a facilitator of parasite development in the mosquito midgut. SGS1 could, therefore, be part of a strategy to decrease malaria transmission by the mosquito vector, for example in a transgenic mosquito that blocks its interaction with the parasite.

Structural and functional comparisons of salivary α-glucosidases from the mosquito vectors Aedes aegypti, Anopheles gambiae, and Culex quinquefasciatus.

Mosquito vectors of medical importance both blood and sugar feed, and their saliva contains bioactive molecules that aid in both processes. Although it has been shown that the salivary glands of several mosquito species exhibit α-glucosidase activities, the specific enzymes responsible for sugar digestion remain understudied. We therefore expressed and purified three recombinant salivary α-glucosidases from the mosquito vectors Aedes aegypti, Anopheles gambiae, and Culex quinquefasciatus and compared their functions and structures. We found that all three enzymes were expressed in the salivary glands of their respective vectors and were secreted into the saliva. The proteins, as well as mosquito salivary gland extracts, exhibited α-glucosidase activity, and the recombinant enzymes displayed preference for sucrose compared to p-nitrophenyl-α-D-glucopyranoside. Finally, we solved the crystal structure of the Ae. aegypti α-glucosidase bound to two calcium ions at a 2.3 Ångstrom resolution. Molecular docking suggested that the Ae. aegypti α-glucosidase preferred di- or polysaccharides compared to monosaccharides, consistent with enzymatic activity assays. Comparing structural models between the three species revealed a high degree of similarity, suggesting similar functional properties. We conclude that the α-glucosidases studied herein are important enzymes for sugar digestion in three mosquito species.

Disentangling detrimental sand fly-mite interactions in a closed laboratory sand fly colony: implications for vector-borne disease studies and guidelines for overcoming severe mite infestations.

BACKGROUND: Vector sand fly colonies are a critical component of studies aimed at improving the understanding of the neglected tropical disease leishmaniasis and alleviating its global impact. However, among laboratory-colonized arthropod vectors of infectious diseases, the labor-intensive nature of sand fly rearing coupled with the low number of colonies worldwide has generally discouraged the widespread use of sand flies in laboratory settings. Among the different factors associated with the low productivity of sand fly colonies, mite infestations are a significant factor. Sand fly colonies are prone to infestation by mites, and the physical interactions between sand flies and mites and metabolites have a negative impact on sand fly larval development. METHODS: Mites were collected from sand fly larval rearing pots and morphologically identified using taxonomic keys. Upon identification, they were photographed with a scanning electron microscope. Several mite control measures were adopted in two different laboratories, one at the Laboratory of Malaria and Vector Research, National Institute of Allergy and Infectious Diseases-National Institutes of Health (Rockville, MD, USA), and the other at the University of Calgary (Calgary, AB, Canada). RESULTS: The mite species associated with sand fly colonies in the two laboratories were morphologically identified as Tyrophagus sp. and Stratiolaelaps scimitus. While complete eradication of mites in sand fly colonies is considered unrealistic, drastically reducing their population has been associated with higher sand fly productivity. CONCLUSIONS: We report a case of detrimental interaction between sand flies and Tyrophagus sp. and S. scimitus in a closed laboratory sand fly colony, discuss their impact on sand fly production and provide guidelines for limiting the mite population size in a closed laboratory colony leading to improved sand fly yields.

Cryo-EM structures of anti-malarial antibody L9 with circumsporozoite protein reveal trimeric L9 association and complete 27-residue epitope.

Monoclonal antibody L9 recognizes the Plasmodium falciparum circumsporozoite protein (PfCSP) and is highly protective following controlled human malaria challenge. To gain insight into its function, we determined cryoelectron microscopy (cryo-EM) structures of L9 in complex with full-length PfCSP and assessed how this recognition influenced protection by wild-type and mutant L9s. Cryo-EM reconstructions at 3.6- and 3.7-Å resolution revealed L9 to recognize PfCSP as an atypical trimer. Each of the three L9s in the trimer directly recognized an Asn-Pro-Asn-Val (NPNV) tetrapeptide on PfCSP and interacted homotypically to facilitate L9-trimer assembly. We analyzed peptides containing different repeat tetrapeptides for binding to wild-type and mutant L9s to delineate epitope and homotypic components of L9 recognition; we found both components necessary for potent malaria protection. Last, we found the 27-residue stretch recognized by L9 to be highly conserved in P. falciparum isolates, suggesting the newly revealed complete L9 epitope to be an attractive vaccine target.

The light chain of the L9 antibody is critical for binding circumsporozoite protein minor repeats and preventing malaria.

L9 is a potent human monoclonal antibody (mAb) that preferentially binds two adjacent NVDP minor repeats and cross-reacts with NANP major repeats of the Plasmodium falciparum circumsporozoite protein (PfCSP) on malaria-infective sporozoites. Understanding this mAb's ontogeny and mechanisms of binding PfCSP will facilitate vaccine development. Here, we isolate mAbs clonally related to L9 and show that this B cell lineage has baseline NVDP affinity and evolves to acquire NANP reactivity. Pairing the L9 kappa light chain (L9κ) with clonally related heavy chains results in chimeric mAbs that cross-link two NVDPs, cross-react with NANP, and more potently neutralize sporozoites in vivo compared with their original light chain. Structural analyses reveal that the chimeric mAbs bound minor repeats in a type-1 ß-turn seen in other repeat-specific antibodies. These data highlight the importance of L9κ in binding NVDP on PfCSP to neutralize sporozoites and suggest that PfCSP-based immunogens might be improved by presenting ≥2 NVDPs.

Highly protective antimalarial antibodies via precision library generation and yeast display screening.

The monoclonal antibody CIS43 targets the Plasmodium falciparum circumsporozoite protein (PfCSP) and prevents malaria infection in humans for up to 9 mo following a single intravenous administration. To enhance the potency and clinical utility of CIS43, we used iterative site-saturation mutagenesis and DNA shuffling to screen precise gene-variant yeast display libraries for improved PfCSP antigen recognition. We identified several mutations that improved recognition, predominately in framework regions, and combined these to produce a panel of antibody variants. The most improved antibody, CIS43_Var10, had three mutations and showed approximately sixfold enhanced protective potency in vivo compared to CIS43. Co-crystal and cryo-electron microscopy structures of CIS43_Var10 with the peptide epitope or with PfCSP, respectively, revealed functional roles for each of these mutations. The unbiased site-directed mutagenesis and screening pipeline described here represent a powerful approach to enhance protective potency and to enable broader clinical use of antimalarial antibodies.

Biochemical characterization of AeD7L2 and its physiological relevance in blood feeding in the dengue mosquito vector, Aedes aegypti.

Aedes aegypti saliva facilitates blood meal acquisition through pharmacologically active compounds that prevent host hemostasis. Among these salivary proteins are the D7s, which are highly abundant and have been shown to act as scavengers of biogenic amines and eicosanoids. In this work, we performed comparative structural modeling, characterized the binding capabilities, and assessed the physiological functions of the Ae. aegypti salivary protein AeD7L2 compared to the well-characterized AeD7L1. AeD7L1 and AeD7L2 show different binding affinities to several biogenic amines and biolipids involved in host hemostasis. Interestingly, AeD7L2 tightly binds U-46619, the stable analog of thromboxane A2 (KD  = 69.4 nm), which is an important platelet aggregation mediator, while AeD7L1 shows no binding. We tested the ability of these proteins to interfere with the three branches of hemostasis: vasoconstriction, platelet aggregation, and blood coagulation. Pressure myography experiments showed these two proteins reversed isolated resistance artery vasoconstriction induced by either norepinephrine or U-46619. These proteins also inhibited platelet aggregation induced by low doses of collagen or U-46619. However, D7 long proteins did not affect blood coagulation. The different ligand specificity and affinities of AeD7L1 and AeD7L2 matched our experimental observations from studying their effects on vasoconstriction and platelet aggregation, which confirm their role in preventing host hemostasis. This work highlights the complex yet highly specific biological activities of mosquito salivary proteins and serves as another example of the sophisticated biology underlying arthropod blood feeding.

The structures of two salivary proteins from the West Nile vector Culex quinquefasciatus reveal a beta-trefoil fold with putative sugar binding properties.

Female mosquitoes require blood meals for egg development. The saliva of blood feeding arthropods contains biochemically active molecules, whose anti-hemostatic and anti-inflammatory properties facilitate blood feeding on vertebrate hosts. While transcriptomics has presented new opportunities to investigate the diversity of salivary proteins from hematophagous arthropods, many of these proteins remain functionally undescribed. Previous transcriptomic analysis of female salivary glands from Culex quinquefasciatus, an important vector of parasitic and viral infections, uncovered a 12-member family of putatively secreted proteins of unknown function, named the Cysteine and Tryptophan-Rich (CWRC) proteins. Here, we present advances in the characterization of two C. quinquefasciatus CWRC family members, CqDVP-2 and CqDVP-4, including their enrichment in female salivary glands, their specific localization within salivary gland tissues, evidence that these proteins are secreted into the saliva, and their native crystal structures, at 2.3 â€‹Å and 1.87 â€‹Å, respectively. The ß-trefoil fold common to CqDVP-2 and CqDVP-4 is similar to carbohydrate-binding proteins, including the B subunit of the AB toxin, ricin, from the castor bean Ricinus communis. Further, we used a glycan array approach, which identifies carbohydrate ligands associated with inflammatory processes and signal transduction. Glycan array 300 testing identified 100 carbohydrate moieties with positive binding to CqDVP-2, and 77 glycans with positive binding to CqDVP-4. The glycan with the highest relative fluorescence intensities, which exhibited binding to both CqDVP-2 and CqDVP-4, was used for molecular docking experiments. We hypothesize that these proteins bind to carbohydrates on the surface of cells important to host immunology. Given that saliva is deposited into the skin during a mosquito bite, and acts as the vehicle for arbovirus inoculation, understanding the role of these proteins in pathogen transmission is of critical importance. This work presents the first solved crystal structures of C. quinquefasciatus salivary proteins with unknown function. These two molecules are the second and third structures reported from salivary proteins from C. quinquefasciatus, an important, yet understudied disease vector.

ADP binding by the Culex quinquefasciatus mosquito D7 salivary protein enhances blood feeding on mammals.

During blood-feeding, mosquito saliva is injected into the skin to facilitate blood meal acquisition. D7 proteins are among the most abundant components of the mosquito saliva. Here we report the ligand binding specificity and physiological relevance of two D7 long proteins from Culex quinquefasciatus mosquito, the vector of filaria parasites or West Nile viruses. CxD7L2 binds biogenic amines and eicosanoids. CxD7L1 exhibits high affinity for ADP and ATP, a binding capacity not reported in any D7. We solve the crystal structure of CxD7L1 in complex with ADP to 1.97 Å resolution. The binding pocket lies between the two protein domains, whereas all known D7s bind ligands either within the N- or the C-terminal domains. We demonstrate that these proteins inhibit hemostasis in ex vivo and in vivo experiments. Our results suggest that the ADP-binding function acquired by CxD7L1 evolved to enhance blood-feeding in mammals, where ADP plays a key role in platelet aggregation.

Influence of a Retentive Shoulder Design to Prevent Early Failure of Three Core Build-Ups.

This study evaluated the influence of a retentive shoulder design to prevent early failure of three resin composite build-ups on molars. Ninety-six intact extracted human maxillary third molars were assigned to two groups (n=48) based on occlusal, buccal cusps only and all cusps reduction. The groups were divided into two subgroups: pin retained and non-pin retained build-ups resulting in four groups (n=24), according the cusps reduction: pin retained/partial, pin retained/complete, non-pin retained/partial, non-pin retained/complete. Occlusal reduction was 3 mm with a semi-lunar retentive shoulder of 3 mm and an axial wall height of 1.5 mm. Groups were restored using a microhybrid, flowable or titanium reinforced resin composite. Modified self-curing acrylic resin provisional crowns were fabricated, cemented with non-eugenol temporary cement and thermal cycled. An instron machine applied tension to the provisional crowns parallel to the long axis of the tooth until dislodgement. A three-way analysis of variance was conducted on the influence of the variables on the retention of the core build-up. Ninety-three build-ups were retained under tensile load, while three core build-ups without pins were dislodged. Three-way analysis of variance showed no statistically significant difference between core build-ups using a retentive shoulder and pin retained core build-ups when tested under tensile load. With the advent of adhesive systems, increased surface area and retentive shoulder design can provide a retentive core foundation to prevent early failures of core build-ups during indirect restoration fabrication which will contribute to the longevity of final restorations.

Influence of a retentive shoulder design to prevent early failure of three core build-ups

Abstract This study evaluated the influence of a retentive shoulder design to prevent early failure of three resin composite build-ups on molars. Ninety-six intact extracted human maxillary third molars were assigned to two groups (n=48) based on occlusal, buccal cusps only and all cusps reduction. The groups were divided into two subgroups: pin retained and non-pin retained build-ups resulting in four groups (n=24), according the cusps reduction: pin retained/partial, pin retained/complete, non-pin retained/partial, non-pin retained/complete. Occlusal reduction was 3 mm with a semi-lunar retentive shoulder of 3 mm and an axial wall height of 1.5 mm. Groups were restored using a microhybrid, flowable or titanium reinforced resin composite. Modified self-curing acrylic resin provisional crowns were fabricated, cemented with non-eugenol temporary cement and thermal cycled. An instron machine applied tension to the provisional crowns parallel to the long axis of the tooth until dislodgement. A three-way analysis of variance was conducted on the influence of the variables on the retention of the core build-up. Ninety-three build-ups were retained under tensile load, while three core build-ups without pins were dislodged. Three-way analysis of variance showed no statistically significant difference between core build-ups using a retentive shoulder and pin retained core build-ups when tested under tensile load. With the advent of adhesive systems, increased surface area and retentive shoulder design can provide a retentive core foundation to prevent early failures of core build-ups during indirect restoration fabrication which will contribute to the longevity of final restorations.

Resumo Este estudo avaliou a influência de um preparo retentivo em forma de ombro para prevenir a falha precoce de núcleos de preenchimento realizados em molares com 3 diferentes tipos de resina composta. Noventa e seis terceiros molares superiores hígidos extraídos de humanos, foram divididos em dois grupos (n=48) de acordo com o tipo de redução oclusal: em todas as cúspides (total) ou nas cúspides vestibulares (parcial). Os grupos foram divididos em dois subgrupos: núcleos retidos a pinos e não retidos a pinos, resultando em quatro grupos (n=24): redução oclusal total/retido a pino, redução oclusal parcial/retido a pino, redução oclusal total/não retido a pino, redução oclusal parcial/não retido a pino. A redução oclusal foi de 3 mm com um ombro retentivo semilunar de 3 mm e uma altura de parede axial de 1,5 mm. Os grupos foram restaurados utilizando resina composta microhíbrida, fluível ou reforçada com titânio. Foram confeccionadas coroas provisórias de resina acrílica autopolimerizável modificada, cimentadas com cimento provisório sem eugenol e termocicladas. Uma máquina universal de ensaios foi utilizada para tracionar as coroas provisórias paralelamente ao longo eixo do dente até o seu deslocamento. Análise de variância de 3 fatores foi aplicada para avaliar o efeito dos fatores na retenção do núcleo. Noventa e três núcleos de preenchimento permaneceram retidos sob a carga de tração, enquanto três núcleos de preenchimento sem pinos foram deslocados. A análise de variância não mostrou diferença significante entre os núcleos de preenchimento com desenho retentivo e os núcleos de preenchimento retidos a pinos. Com o advento dos sistemas adesivos, o aumento da área de superfície e o desenho retentivo dos ombros podem fornecer um preparo retentivo para evitar falhas precoces nos núcleos de preenchimento durante a fabricação de restaurações indiretas, o que contribuirá para a longevidade das restaurações finais.