RESUMEN
In this paper, we demonstrate a 70 Gbit/s photonic-based wireless link at 60 GHz using a single RF carrier and a single polarization. This high capacity is achieved by using 32QAM modulation with a symbol rate of 14 GBd. We show a novel pre-equalization technique that enables usage of such very high bandwidths at 60 GHz. Our work indicates that the consumer oriented 60 GHz band could be a viable alternative to more expensive E-band or sub-THz links for high capacity photonic wireless transmission, mobile backhauling and last-mile high-capacity connections.
RESUMEN
In this paper, we demonstrate an integrated microwave phoneeded for beamtonics phased array antenna feeder at 60 GHz with a record-low footprint. Our design is based on ultra-compact plasmonic phase modulators (active area <2.5µm2) that not only provide small size but also ultra-fast tuning speed. In our design, the integrated circuit footprint is in fact only limited by the contact pads of the electrodes and by the optical feeding waveguides. Using the high speed of the plasmonic modulators, we demonstrate beam steering with less than 1 ns reconfiguration time, i.e. the beam direction is reconfigured in-between 1 GBd transmitted symbols.
RESUMEN
Plasmonic modulators might pave the way for a new generation of compact low-power high-speed optoelectronic devices. We introduce an extremely compact transmitter based on plasmonic Mach-Zehnder modulators offering a capacity of 4 × 36 Gbit/s on a footprint that is only limited by the size of the high-speed contact pads. The transmitter array is contacted through a multicore fiber with a channel spacing of 50 µm.
RESUMEN
The concept and performance of the first multiwavelength deep UV light-emitting-diode-based high-performance liquid chromatography (HPLC) absorbance detector are presented. In single-wavelength mode and with optical reference, the limit of detection (LOD) is comparable to conventional state-of-the-art HPLC absorbance detectors. In multiwavelength mode--at present up to eight wavelengths without optical reference--the LOD is about 10 times higher than in single-wavelength mode. Multiplexing and demultiplexing methods are used to separate chromatographic signals in multiwavelength mode and keeps the detector configuration simple and yet flexible. Depending on the operation mode, stray light is either totally negligible or controlled electronically and digitally.
Asunto(s)
Antracenos/análisis , Cafeína/análisis , Cromatografía Líquida de Alta Presión/instrumentación , Tolueno/análisis , Cromatografía Líquida de Alta Presión/métodos , Límite de Detección , Rayos UltravioletaRESUMEN
To cope with the high bandwidth requirements of wireless applications1, carrier frequencies are shifting towards the millimetre-wave and terahertz bands2-5. Conversely, data is normally transported to remote wireless antennas by optical fibres. Therefore, full transparency and flexibility to switch between optical and wireless domains would be desirable6,7. Here, we demonstrate for the first time a direct wireless-to-optical receiver in a transparent optical link. We successfully transmit 20 and 10 Gbit/s over wireless distances of 1 and 5 m at a carrier frequency of 60 GHz, respectively. Key to the breakthrough was a plasmonic mixer directly mapping the wireless information onto optical signals. The plasmonic scheme with its subwavelength feature and pronounced field confinement provides a built-in field enhancement of up to 90'000 over the incident field in an ultra-compact and CMOS compatible structure. The plasmonic mixer is not limited by electronic speed and thus compatible with future terahertz technologies.
RESUMEN
Sludges from sixteen municipal and eleven industrial Swiss sewage treatment plants were analysed for adsorbable organic compounds (AOX), chlorinated pesticides, polychlorinated biphenyls and polycyclic aromatic hydrocarbons. Except for the AOX values, which were significantly higher (p < 0.05) in industrial sludges, there was no significant difference between industrial and municipal sludges. The AOX values did not correlate with any of the measured pollutants. The methods employed (capillary GC-MS and GC-electron-capture detection) proved to be suitable for monitoring organic micropollutants in industrial and municipal sewage sludges.