Evaluation of the force required to move a coalesced liquid droplet along a fiber.

This work presents a theoretical model describing the force required to move a coalesced liquid droplet along an oleophilic filter fiber. Measurements have been made using the atomic force microscope (AFM) to examine these forces over a range of fiber and droplet diameters as well as oil properties. Good agreement between measured and modeled forces was found. The influence of droplet displacement perpendicular to the fiber on the force required to move the droplet has also been determined experimentally and theoretically. It was found that fiber surface inhomogeneities are likely to influence results. This work has also established empirical relationships that can be used to predict the force, based on a known droplet volume, for the liquid types used.

Detachment of liquid droplets from fibres--experimental and theoretical evaluation of detachment force due to interfacial tension effects.

The detachment of barrel-shaped oil droplets from metal, glass and polymer fibres was examined using an atomic force microscope (AFM). The AFM was used to detach the droplets from the fibres while measuring the force-distance relationship. A novel fibre-droplet interfacial tension model was applied to predict the force required to draw the droplet away from its preferential axisymmetric position on the fibre, and also to predict the maximal force required to detach the droplet. The model assumes that the droplet retains a spherical shape during detachment, i.e., that droplet distortion is negligible. This assumption was found to be reasonably accurate for small radius oil droplets (<10 microm), however less accurate for larger droplets (>25 microm). However, it was found that the model produced a good agreement with the maximal detachment force measured experimentally--regardless of droplet size and degree of deformation--even though the model could not predict droplet extension beyond a length of one droplet radius.

Observation and modelling of barrel droplets on vertical fibres subjected to gravitational and drag forces.

Extensive experimental investigation of the wetting processes of fibre/liquid systems during air filtration (when drag and gravitational forces are acting) has shown many important features, including droplet extension, oscillatory motion, and detachment or flow of drops from fibres as airflow velocity increases. A detailed experimental study of the aforementioned processes was conducted using glass filter fibres and H(2)O aerosol, which coalesce on the fibre to form barrel droplets with small contact angles. The droplets were predominantly observed in the Reynolds transition (or unsteady laminar) flow region. The droplet oscillation appears to be induced by the onset of vortexes in the flow field around the droplet as the increasing droplet size increases the Reynolds number. Flow in this region is usually modelled using the classical two-dimensional Karman vortex street, and there exist no 3D equivalents. Therefore to model such oscillation it was necessary to create a new conceptual model to account for the forces both inducing and inhibiting such oscillation. The agreement between the model and experimental results is acceptable for both the radial and transverse oscillations.

Observation and modelling of clamshell droplets on vertical fibres subjected to gravitational and drag forces.

Extensive experimental investigation of the wetting processes of fibre-liquid systems during air filtration (when drag and gravitational forces are acting) has shown many important features, including droplet extension, oscillatory motion, and detachment of drops from fibres as airflow velocity increases, and also movement or flow of droplets along fibres. A detailed experimental study of the processes was conducted using stainless steel filter fibres and H2O aerosol, which coalesce on the fibre to form clamshell droplets. The droplets were predominantly observed in the Reynolds transition flow region, since this is the region where most of the above features occur. The droplet oscillation is believed to be induced by the onset of the transition from laminar to turbulent flow as the increasing droplet size increases Reynolds number for the flow around the droplet. Two-dimensional flow in this region is usually modelled using the classical Karman vortex street, however there exist no 3D equivalents. Therefore to model such oscillation it was necessary to create a new conceptual model to account for the forces both inducing and preventing such oscillation. The agreement between the model and experimental results is very good for both the radial and transverse oscillations.

Particle capture processes and evaporation on a microscopic scale in wet filters.

This paper details results of an experimental study of the capture of solid and liquid aerosols on fibrous filters wetted with water. A microscopic cell containing a single fibre (made from a variety of materials) was observed via a microscope, with a high speed CCD camera used to dynamically image the interactions between liquid droplets, zeolite and PSL particles and fibres. Variable quantities of liquid irrigation were used, and the possibility for subsequent fibre regeneration after clogging or drying was also studied. It was found that drainage of the wetting liquid (water) from the fibres occurred, even at very low irrigation rates when the droplet consisted almost completely of captured particles. It was also found that the fibre was rapidly loaded with captured particles when the irrigation was not supplied. However, almost complete regeneration (removal of the collected cake) by the liquid droplets occurred shortly after recommencement of the water supply. The study also examined the capture of oily liquid aerosols on fibres wetted with water. A predominance of the barrel shaped droplet on the fibre was observed, with oil droplets displacing water droplets (if the oil and fibre combination created a barrel shaped droplet), creating various compound droplets of oil and water not previously reported in literature. This preferential droplet shape implies that whatever the initial substance wetting a filter, a substance with a greater preferential adherence to the fibre will displace the former one.

Effect of fiber orientation on fiber wetting processes.

The current work incorporates a microscopic study of the effect of fiber orientation on the fiber wetting process and flow of liquid droplets along filter fibers when subjected to airflow and gravity forces. Glass filter fibers in various combinations were oriented at various angles within a plane defined by the airflow direction and were supplied with distilled water in aerosol form. The behavior and flow of the liquid collected by the fibers were observed and measured using a specially developed microscope cell, detailed in the paper. The experimental results were compared to a theoretical model developed to describe the behavior. The theory and experimental results showed good agreement. The developed theory allows an optimum angle to be determined for the internal filter fiber structure in the design of wet filters. A sensitivity analysis of the model was conducted to determine the most important parameters. This will aid design of wet filtration systems such that maximal self-cleaning can be accomplished with minimal water use.