Halide Anions Tuning of Lead-Free Perovskite-Type Ferroelectric Semiconductors with Inverse High-Temperature Symmetry Breaking.

There is a noticeable gap in the literature regarding research on halogen-substitution-regulated ferroelectric semiconductors featuring multiple phase transitions. Here, a new category of 1D perovskite ferroelectrics (DFP)2 SbX5 (DFP+ = 3,3-difluoropyrrolidium, X- = I- , Br- , abbreviated as I-1 and Br-2) with twophase transitions (PTs) is reported. The first low-temperature PT is a mmmFmm2 ferroelectric PT, while the high-temperature PT is a counterintuitive inverse temperature symmetry-breaking PT. By the substitution of iodine with bromine, the Curie temperature (Tc) significantly increases from 348 K of I-1 to 374 K of Br-2. Their ferroelectricity and pyroelectricity are improved (Ps value from 1.3 to 4.0 µC cm-2 , pe value from 0.2 to 0.48 µC cm-2  K-1 for I-1 and Br-2), while their optical bandgaps increased from 2.1 to 2.7 eV. A critical slowing down phenomenon is observed in the dielectric measurement of I-1 while Br-2 exhibits the ferroelastic domain. Structural and computational analyses elucidate that the order-disorder movement of cations and the distortion of the chain perovskite [SbX5 ]2- anions skeleton lead to PT. The semiconductor properties are determined by [SbX5 ]2- anions. The findings contribute to the development of ferroelectric semiconductors and materials with multiple PTs and provide materials for potential applications in the optoelectronic field.

Piezo-Activated Atomic-Thin Molybdenum Disulfide/MXene Nanoenzyme for Integrated and Efficient Tumor Therapy via Ultrasound-Triggered Schottky Electric Field.

Monolayer molybdenum disulfide (MoS2 ) nanoenzymes exhibit a piezoelectric polarization, which generates reactive oxygen species to inactivate tumors under ultrasonic strain. However, its therapeutic efficiency is far away from satisfactory, due to stackable MoS2 , quenching of piezo-generated charges, and monotherapy. Herein, chitosan-exfoliated monolayer MoS2 (Ch-MS) is composited with atomic-thin MXene, Ti3 C2 (TC), to self-assemble a multimodal nanoplatform, Ti3 C2 -Chitosan-MoS2 (TC@Ch-MS), for tumor inactivation. TC@Ch-MS not only inherits piezoelectricity from monolayer MoS2 , but also maintains remarkable stability. Intrinsic metallic MXene combines with MoS2 to construct an interfacial Schottky heterojunction, facilitating the separation of electron-hole pairs and endowing TC@Ch-MS increase-sensitivity magnetic resonance imaging responding. Schottky interface also leads to peroxidase mimetics with excellent catalytic performance toward H2 O2 in the tumor microenvironment under mechanical vibration. TC@Ch-MS possesses the superior photothermal conversion efficiency than pristine TC under near-infrared ray illumination, attributed to its enhanced interlaminar conductivity. Meanwhile, TC@Ch-MS realizes optimized efficiency on tumor apoptosis with immunotherapy. Therefore, TC@Ch-MS achieves an integrated diagnosis and multimodal treatment nanoplatform, whereas the toxicity to normal tissue cells is negligible. This work may shed fresh light on optimizing the piezoelectric materials in biological applications, and also give prominence to the significance of intrinsic metallicity in MXene.

NIR-Activated Multimodal Photothermal/Chemodynamic/Magnetic Resonance Imaging Nanoplatform for Anticancer Therapy by Fe(II) Ions Doped MXenes (Fe-Ti3 C2 ).

2D MXene, Ti3 C2 (TC), has displayed enormous potential in applications in photothermal therapy (PTT), attributing to its biocompatibility and outstanding photothermal conversion capability. However, some tumor ablations are difficult to be realized completely by monotherapy due to the essential defects of monotherapy and intricate tumor microenvironment (TME). In this work, the appropriate doped Fe2+ ions are anchored into the layers of 2D ultrathin TC nanosheets (TC NSs) to synthesize a novel multifunctional nanoshell of Fe(II)-Ti3 C2 (FTC) through interlayer electrostatic adsorption. FTC possesses superior photothermal conversion efficiency (PTCE) than TC NSs, attributing to the enhanced conductivity promoted by interlaminar ferrous ion-channels. Moreover, Fenton reaction based on ferrous ions endows FTC the abilities of reactive oxide species (ROS) releasing and glutathione (GSH) suppression triggered by near-infrared (NIR) laser, featuring splendid biocompatibility and curative effect in hypoxic TME. Meanwhile, magnetic resonance imaging (MRI) responding in FTC reveals the potential as an integrated diagnosis and treatment nanoplatform. FTC could provide new insights into the development of multimoded synergistic nanoplatform for biological applications, especially breaking the shackles of MXenes merely used as a photo-thermal agent (PTA), adopting it to bioimaging sensor and drug loading.

An Organic-Inorganic Hybrid Pyrrolidinium Ferroelectric Based on Solvent Selective Effect.

Organic-inorganic hybrid ferroelectrics (OIHFs) have fueled enormous interest benefiting from their less environmental pollution, performance-tailored functionality, low product costs as well as tunability of structures. However, the lack of material synthesis approaches and diverse targeted molecular design is a stumbling block for designing novel OIHFs rationally. Here, we report a unique organic-inorganic hybrid ferroelectric (3,3-difluoropyrrolidine)2CdCl4 1 and another novel nonferroelectric crystal (3,3-difluoropyrrolidine)2Cd2Cl6 2 by changing various crystallization solvents. Significantly, 1 presents a ferroelectric phase transition behavior at ∼367 K, and the distinct symmetry breaking, i.e., mmmFm, sets up a biaxial ferroelectric with four equivalent directions of polarization, which has a Pr ∼ 0.77 µC/cm2. Systematic studies prove that ferroelectricity can be ascribed to the synergistic effects of the distortion of the inorganic anion skeleton and the ordering of organic cations. This work reveals the potential of constructing novel ferroelectrics based on the solvent selective effect and pyrrolidinium as organic cations.

Ferroelectric switching of elastin.

Ferroelectricity has long been speculated to have important biological functions, although its very existence in biology has never been firmly established. Here, we present compelling evidence that elastin, the key ECM protein found in connective tissues, is ferroelectric, and we elucidate the molecular mechanism of its switching. Nanoscale piezoresponse force microscopy and macroscopic pyroelectric measurements both show that elastin retains ferroelectricity at 473 K, with polarization on the order of 1 µC/cm(2), whereas coarse-grained molecular dynamics simulations predict similar polarization with a Curie temperature of 580 K, which is higher than most synthetic molecular ferroelectrics. The polarization of elastin is found to be intrinsic in tropoelastin at the monomer level, analogous to the unit cell level polarization in classical perovskite ferroelectrics, and it switches via thermally activated cooperative rotation of dipoles. Our study sheds light onto a long-standing question on ferroelectric switching in biology and establishes ferroelectricity as an important biophysical property of proteins. This is a critical first step toward resolving its physiological significance and pathological implications.

Above Room Temperature Organic Ferroelectrics: Diprotonated 1,4-Diazabicyclo[2.2.2]octane Shifts between Two 2-Chlorobenzoates.

A pure organic single crystal, [H2dabco]·[2CB]2 ([H2dabco](2+) = diprotonated 1,4-diazabicyclo[2.2.2]octane, 2CB(-) = 2-chlorobenzoate), which undergoes a ferroelectric-to-paraelectric phase transition above room temperature (∼323 K upon heating), was prepared and characterized. This ferroelectric crystal possesses a distinctive supramolecular architecture composed of discrete H-bonded trimeric units (two 2CB(-) anions bridged by one [H2dabco](2+) cation through N-H···O hydrogen bond interactions). In the paraelectric phase, the [H2dabco](2+) cation is rotationally disordered and lies at the symmetric center of the trimer. Upon cooling, it is frozen in an ordered state and deviates toward a 2CB(-) anion at one end along the H-bond. The collective displacement of the cations leads to a polarization of the single crystal along the crystallographic c axis, which is confirmed by the temperature dependence of the second harmonic generation and spontaneous polarization. A significant increase in the phase transition temperature of the deuterated analogue suggests that the proton plays an important role in the ferroelectric phase transition.

The growth mechanism and ferroelectric domains of diisopropylammonium bromide films synthesized via 12-crown-4 addition at room temperature.

Diisopropylammonium bromide (DIPAB) has attracted great attention as a molecular ferroelectric with large spontaneous polarization and high Curie temperature. It is hard to grow the ferroelectric phase DIPAB because of the appearance of the non-ferroelectric phase DIPAB at room temperature. Here, a ferroelectric thin film of DIPAB was successfully fabricated on a Si substrate using a spin coating method from aqueous solution via 12-crown-4 addition at room temperature. The ferroelectric DIPAB film with a thickness of hundreds of nanometers is distributed discontinuously on the substrate in narrow strips. The direction of polarization is along the narrow strip. Piezoresponse force microscopy (PFM) shows that the ferroelectric films have two kinds of domain structures: noncharged antiparallel stripe domains and charged head-to-head (H-H)/tail-to-tail (T-T) type domains. 12-crown-4 has been proved to play important roles in forming the H-H/T-T type domains. The Chynoweth method shows that the DIPAB films synthesized in this way show a better pyroelectric effect than DIPAB crystals.

Relaxation of ferroelectric thin films of diisopropylammonium perchlorate.

Molecular ferroelectric thin films are highly desirable for their easy and environmentally friendly processing, light weight, and mechanical flexibility. A thin film of diisopropylammonium perchlorate (DIPAP) processed by a spin-coating method shows a good roughness and textured structure with (101) orientation in the ferroelectric phase with a space group of P1. Simultaneously, the thin film shows ferroelectricity and ferroelectric relaxivity above room temperature, which is completely different from crystals. These properties make DIPAP a candidate in sensing, data storage, electro-optics, and molecular/flexible electronics.

4-Methoxyanilinium perrhenate 18-crown-6: a new ferroelectric with order originating in swinglike motion slowing down.

A supramolecular adduct 4-methoxyanilinium perrhenate 18-crown-6 was synthesized, which undergoes a disorder-order structural phase transition at about 153 K (T(c)) due to slowing down of a pendulumlike motion of the 4-methoxyanilinium group upon cooling. Ferroelectric hysteresis loop measurements give a spontaneous polarization of 1.2 µC/cm2. Temperature-dependent solid-state nuclear magnetic resonance measurements reveal three kinds of molecular motions existing in the compound: pendulumlike swing of 4-methoxyanilinium cation, rotation of 18-crown-6 ring, and rotation of the methoxyl group. When the temperature decreases, the first two motions are frozen at about 153 K and the methoxyl group becomes rigid at around 126 K. The slowing down or freezing of pendulumlike motion of the cation triggered by temperature decreasing corresponds to the centrosymmetric-to-noncentrosymmetric arrangement of the compound, resulting in the formation of ferroelectricity.

Molecular ferroelectrics: where electronics meet biology.

In the last several years, we have witnessed significant advances in molecular ferroelectrics, with the ferroelectric properties of molecular crystals approaching those of barium titanate. In addition, ferroelectricity has been observed in biological systems, filling an important missing link in bioelectric phenomena. In this perspective, we will present short historical notes on ferroelectrics, followed by an overview of the fundamentals of ferroelectricity. The latest developments in molecular ferroelectrics and biological ferroelectricity will then be highlighted, and their implications and potential applications will be discussed. We close by noting molecular ferroelectric as an exciting frontier between electronics and biology, and a number of challenges ahead are also described.

A room temperature ferroelectric material with photoluminescence: (1,3-dicyclohexylimidazole)2MnCl4.

Molecular ferroelectric materials have been widely used in capacitors and sensors due to their low cost, light weight, flexibility and good biocompatibility. Organic-inorganic hybrid complexes, on the other hand, have received a great deal of attention in the luminescence field due to their low cost and simple preparation. The combination of ferroelectricity and photoluminescence in organic-inorganic hybrid materials not only leads to tunable optical properties, but also enriches potential applications of multifunctional ferroelectrics in optoelectronic devices. Here, we report a new luminescent ferroelectric material (1,3-dicyclohexylimidazole)2MnCl4 (DHIMC). Thermogravimetric analysis (TGA) was used to measure the mass change of the material at a measurement rate of 20 K min-1 from room temperature to 900 K, and we found that this material has good thermostability, which is up to 383 K. Meanwhile, UV-vis measurements showed that it is also a fluorescent material emitting a strong green fluorescence at the wavelength of 525 nm. The ferroelectricity of the crystal was determined by two different methods: the Sawyer-Tower method and the double-wave method (DWM). Particularly, the single crystal experiences a phase transition from the ferroelectric phase to the paraelectric phase during the heating/cooling process at 318 K/313 K and the space group changes from P1̄ (centrosymmetric) to P1 (non-centrosymmetric). This work will enrich multifunctional luminescent ferroelectric materials and their application in display and sensing.

Enhanced Electrocaloric Effect of Lead Scandium Tantalate by Zirconium Doping.

The electrocaloric effect (ECE) is a novel technology that offers high efficiency and environmental friendliness, making it suitable for solid-state refrigeration applications. Among the extensively studied ECE materials, lead scandium tantalate (PST) stands out for its excellent performance. However, its applications are restricted by its narrow working temperature range. To overcome this limitation, we explore the enhancement of the ECE through zirconium ion doping. We synthesized PbSc0.5-0.5xTa0.5-0.5xZrxO3 samples (x = 0, 0.025, 0.05, 0.075). The introduction of zirconium ions led to an increase in the Curie temperature from 28.9 °C (x = 0) to 55.5 °C (x = 0.075). Additionally, the relaxation factor γ of the ceramics increased from 1.40 (x = 0) to 1.59 (x = 0.075). The temperature span (Tspan) exhibited a rising trend with increasing x, reaching 10.9 K at x = 0.075. The maximum temperature change (ΔTmax) was observed at x = 0.025, with a value of 1.94 K. X-ray diffraction (XRD) patterns revealed that zirconium ion doping influenced the B-site ordering degree, thereby regulating the ECE. To further validate the results, we employed direct measurements and thermodynamic calculations. Overall, the regulation of ionic ordering through zirconium doping effectively enhances the ECE performance. These findings contribute to the development of advanced materials for solid-state refrigeration technologies.

Above-room-temperature magnetodielectric coupling in a possible molecule-based multiferroic: triethylmethylammonium tetrabromoferrate(III).

A possible above-room-temperature molecular multiferroic, triethylmethylammonium tetrabromoferrate(III) (1), has been discovered. Its ferroelectric and magnetic phase transitions take place at almost the same temperature (∼360 K), resulting in strong magnetodielectric (MD) coupling, with a MD ratio of 18% at 0.6 MHz. Interestingly, 1 also undergoes a low-temperature ferroelectric-ferroelectric phase transition with an Aizu notation of 6mmF6 and small magnetic and dielectric anomalies at 171 K.

Ferroelectricity induced by ordering of twisting motion in a molecular rotor.

A novel mononuclear metal-organic compound, [Cu(Hdabco)(H(2)O)Cl(3)] (1, dabco = 1,4-diazabicyclo[2.2.2]octane) in which the Cu(II) cation adopts a slightly distorted bipyramidal geometry where the three Cl anions constitute the equatorial plane and the Hdabco cation and H(2)O molecule occupy the two axial positions, was synthesized. Its paraelectric-to-ferroelectric phase transition at 235 K (T(c)) and dynamic behaviors were characterized by single crystal X-ray diffraction analysis, thermal analysis, dielectric and ferroelectric measurements, second harmonic generation experiments, and solid-state nuclear magnetic resonance measurements. Compound 1 behaves as a molecular rotor above room temperature in which the (Hdabco) part rotates around the N···N axis as a rotator and the [Cu(H(2)O)Cl(3)] part acts as a stator. In the temperature range 235-301 K, a twisting motion of the rotator is confirmed. Below the T(c), the motions of the rotor are frozen and the molecules become ordered, corresponding to a ferroelectric phase. Origin of the ferroelectricity was ascribed to relative movements of the anions and cations from the equilibrium position, which is induced by the order-disorder transformation of the twisting motion of the molecule between the ferroelectric and paraelectric phases. Study of the deuterated analogue [Cu(Ddabco)(D(2)O)Cl(3)] (2) excludes the possibility of proton ordering as the origin of the ferroelectricity in 1.

Effect of positive airway pressure on cardiac troponins in patients with sleep-disordered breathing: A meta-analysis.

BACKGROUND: Cardiac troponins are highly sensitive and specific biomarkers for cardiac injury. Previous studies evaluating the effect of positive airway pressure (PAP) on cardiac troponins in patients with sleep-disordered breathing (SDB) have yielded conflicting results. The meta-analysis was performed to examine the effect of PAP on cardiac troponins in SDB patients. METHODS: PubMed, Web of Science, and EMBASE before September 2021 on original English language studies were searched. The data on cardiac troponins in both baseline and post-PAP treatment were extracted from all studies. The data on the change of cardiac troponins in both PAP and control group were extracted from randomized controlled trials. Standardized mean difference (SMD) was used to synthesize quantitative results. RESULTS: A total of 11 studies were included. PAP treatment was not associated with a significant change in cardiac troponin T between the baseline and post-PAP treatment (SMD = -0.163, 95% confidence interval [CI] = -0.652 to 0.326, z = 0.65, p = .514). The pooled estimate of SMD of cardiac troponin I between the pre- and post-PAP treatment was 0.287, and the 95% CI was -0.586 to 1.160 (z = 0.64, p = .519). The pooled SMD of change of cardiac troponin T between the PAP group and control group was -0.473 (95% CI = -1.198 to 0.252, z = 1.28, p = .201). CONCLUSIONS: This meta-analysis revealed that PAP treatment was not associated with any change of cardiac troponin in SDB patients.

Large dielectric switch effects induced by an order-disorder transformation in cyclopropylamine perchlorate crystals.

Solid-state crystals with two distinct dielectric states can be a physical practice in binary-based technologies. A large dielectric switch effect up to 103 caused by an order-disorder structural phase transition is found in cyclopropylamine perchlorate (CPA-ClO4) crystals at temperatures around 230 K (Tc) and 220 K (T'c). Large dielectric switch effects here can be compared to that of the famous ceramic oxide dielectrics. As far as we know, this is the highest dielectric switch effect in simple organic salt crystals and organic-metal compounds so far. If the phase transition temperature can be adjusted by molecular manipulation, one of the most promising candidates for technological applications may emerge in the future.

Niobium carbide (MXene) reduces UHMWPE particle-induced osteolysis.

Joint replacement surgery is one of the orthopedic surgeries with high successful rates; however, wear debris generated from prostheses can ultimately lead to periprosthetic osteolysis and failure of the implant. The implant-derived particulate debris such as ultrahigh molecular weight polyethylene (UHMWPE) can initiate the local immune response and recruit monocytic cells to phagocytose particles for generating reactive oxygen species (ROS). ROS induces osteoclastogenesis and macrophages to secrete cytokines which ultimately promote the development of osteolysis. In this work, we develop the few-layered Nb2C (FNC) as an antioxidant which possesses the feature of decreasing the production of cytokines and inhibiting osteoclastogenesis by its ROS adsorption. Moreover, local injection of FNC attenuates the UHMWPE-induced osteolysis in a mouse calvarial model. In sum, our results suggest that FNC can be used for treating osteolytic bone disease caused by excessive osteoclastogenesis.

Supramolecular bola-like ferroelectric: 4-methoxyanilinium tetrafluoroborate-18-crown-6.

Molecular motion is one of the structural foundations for the development of functional molecular materials such as artificial motors and molecular ferroelectrics. Herein, we show that pendulum-like motion of the terminal group of a molecule causes a ferroelectric phase transition. Complex 4-methoxyanilinium tetrafluoroborate-18-crown-6 ([C(7)H(10)NO(18-crown-6)](+)[BF(4)](-), 1) shows a second-order ferroelectric phase transition at 127 K, together with an abrupt dielectric anomaly, Debye-type relaxation behavior, and the symmetry breaking confirmed by temperature dependence of second harmonic generation effect. The origin of the polarization is due to the order-disorder transition of the pendulum-like motions of the terminal para-methyl group of the 4-methoxyanilinium guest cation; that is, the freezing of pendulum motion at low temperature forces significant orientational motions of the guest molecules and thus induces the formation of the ferroelectric phase. The supramolecular bola-like ferroelectric is distinct from the precedent ferroelectrics and will open a new avenue for the design of polar functional materials.

Coexistence of magnetic and electric orderings in the metal-formate frameworks of [NH4][M(HCOO)3].

A family of three-dimensional chiral metal-formate frameworks of [NH(4)][M(HCOO)(3)] (M = Mn, Fe, Co, Ni, and Zn) displays paraelectric to ferroelectric phase transitions between 191 and 254 K, triggered by disorder-order transitions of NH(4)(+) cations and their displacement within the framework channels, combined with spin-canted antiferromagnetic ordering within 8-30 K for the magnetic members, providing a new class of metal-organic frameworks showing the coexistence of magnetic and electric orderings.

4-(cyanomethyl)anilinium perchlorate: a new displacive-type molecular ferroelectric.

A new organic ferroelectric compound, 4-(cyanomethyl)anilinium perchlorate, proceeds a second-order phase transition from a paraelectric phase (P2(1)/m) to a ferroelectric phase (P2(1)) at 184 K. A perfect ferroelectric hysteresis loop was observed even at 10 KHz. It is the first example of a molecule-based organic ferroelectric whose polarization can be switched at such a high frequency. The temperature dependent second harmonic generation effect shows that the second-order nonlinear coefficient is nearly zero above T(c) and proportional to the spontaneous polarization below T(c), suggesting the occurrence of symmetry breaking, in good agreement with crystal structural determination. The origin of ferroelectricity was ascribed to the displacements of -NH(3)(+) cations and ClO(4)(-) anions from the symmetric positions including a small part of the order-disorder behaviors of the ClO(4)(-) anions.