RESUMEN
Lithium-sulfur batteries show fascinating potential for advanced energy storage systems due to their high specific capacity, low-cost, and environmental benignity. However, the shuttle effect and the uncontrollable deposition of lithium sulfide species result in poor cycling performance and low Coulombic efficiency. Despite the recent success in trapping soluble polysulfides via porous matrix and chemical binding, the important mechanism of such controllable deposition of sulfur species has not been well understood. Herein, we discovered that conductive Magnéli phase Ti4O7 is highly effective matrix to bind with sulfur species. Compared with the TiO2-S, the Ti4O7-S cathodes exhibit higher reversible capacity and improved cycling performance. It delivers high specific capacities at various C-rates (1342, 1044, and 623 mAh g(-1) at 0.02, 0.1, and 0.5 C, respectively) and remarkable capacity retention of 99% (100 cycles at 0.1 C). The superior properties of Ti4O7-S are attributed to the strong adsorption of sulfur species on the low-coordinated Ti sites of Ti4O7 as revealed by density functional theory calculations and confirmed through experimental characterizations. Our study demonstrates the importance of surface coordination environment for strongly influencing the S-species binding. These findings can be also applicable to numerous other metal oxide materials.
RESUMEN
Using first-principles spin polarized density functional theory (DFT) calculations, we investigated structures and electronic properties of "external" nitrogen-containing group (pyridine derivatives) modified graphene via a single or a double bonding mode. Our results show that in the most stable structures, the bonding between pyridine derivatives and graphene involves the ortho-carbon of pyridine derivatives, as confirmed by the Bader charge analysis. The enhanced stability of pyridine derivatives on graphene by [2+2] cycloaddition, e.g., a double bonding mode (DBPyNG), is caused by the matches between frontier orbitals of pyridine derivatives and those of graphene, which leads to the formation of stronger chemical bonds. Interestingly, electronic structure density of states (DOS) analysis of SBPyNG reveals that the spin-up and spin-down parts are clearly split while it is not the case for the double bonding pyridine derivative modified graphene (DBPyNG).
RESUMEN
Photoacoustic microscopy (PAM), whose image quality largely depends on the optical absorption of samples, provides endogenous information for structural and functional imaging. However, PAM technology in general can not provide edge enhancement imaging for absorbing objects. Therefore, PAM and differential microscopy are integrated for the first time in a single technique to obtain an edge enhancement image. The resolution test target RTA-07 and red blood cells are used as samples to achieve the desired spatial differential photoacoustic imaging. The feasible biomedical application of edge enhancement from the improved differential PAM was demonstrated.
RESUMEN
Lithium-sulfur batteries have attracted attention due to their six-fold specific energy compared with conventional lithium-ion batteries. Dissolution of lithium polysulfides, volume expansion of sulfur and uncontrollable deposition of lithium sulfide are three of the main challenges for this technology. State-of-the-art sulfur cathodes based on metal-oxide nanostructures can suppress the shuttle-effect and enable controlled lithium sulfide deposition. However, a clear mechanistic understanding and corresponding selection criteria for the oxides are still lacking. Herein, various nonconductive metal-oxide nanoparticle-decorated carbon flakes are synthesized via a facile biotemplating method. The cathodes based on magnesium oxide, cerium oxide and lanthanum oxide show enhanced cycling performance. Adsorption experiments and theoretical calculations reveal that polysulfide capture by the oxides is via monolayered chemisorption. Moreover, we show that better surface diffusion leads to higher deposition efficiency of sulfide species on electrodes. Hence, oxide selection is proposed to balance optimization between sulfide-adsorption and diffusion on the oxides.
RESUMEN
Direct biomass conversion into chemicals remains a great challenge because of the complexity of the compounds; hence, this process has attracted less attention than conversion into fuel. In this study, we propose a simple one-step method for converting bagasse into furfural (FF) and acetic acid (AC). In this method, bagasse pyrolysis over ZnCl2/HZSM-5 achieved a high FF and AC yield (58.10%) and a 1.01 FF/AC ratio, but a very low yield of medium-boiling point components. However, bagasse pyrolysis using HZSM-5 alone or ZnCl2 alone still remained large amounts of medium-boiling point components or high-boiling point components. The synergistic effect of HZSM-5 and ZnCl2, which combines pyrolysis, zeolite cracking, and Lewis acid-selective catalysis results in highly efficient bagasse conversion into FF and AC. Therefore, our study provides a novel, simple method for directly converting biomass into high-yield useful chemical.