Stretchable and Compressible Si3 N4 Nanofiber Sponge with Aligned Microstructure for Highly Efficient Particulate Matter Filtration under High-Velocity Airflow.

Particulate matter (PM) is one of the most severe air pollutants and poses a threat to human health. Air filters with high filtration efficiency applied to the source of PM are an effective way to reduce pollution. However, many of the present filtration materials usually fail because of their high pressure drop under high-velocity airflow and poor thermal stability at high temperatures. Herein, a highly porous Si3 N4 nanofiber sponge (Si3 N4 NFS) assembled by aligned and well-interconnected Si3 N4 nanofibers is designed and fabricated via chemical vapor deposition (CVD). The resulting ultralight Si3 N4 NFS (2.69 mg cm-3 ) processes temperature-invariant reversible strechability (10% strain) and compressibility (50% strain), which enables its mechanical robustness under high-velocity airflow. The highly porous and aligned microstructure result in a Si3 N4 NFS with high filtration efficiency for PM2.5 (99.97%) and simultaneous low pressure drop (340 Pa, only <0.33% of atmospheric pressure) even under a high gas flow velocity (8.72 m s-1 ) at a high temperature (1000 °C). Furthermore, the Si3 N4 NFS air filter exhibits good long-term service ability and recyclability. Such Si3 N4 NFS with aligned microstructures for highly efficient gas filters provides new perspectives for the design and preparation of high-performance filtration materials.

TGF-ß Signaling Induces the Expression of OPN in Blood Vessel Endothelial Cells.

BACKGROUND: The mechanism of blood vessel formation and degeneration still remains unclear. Transforming growth factor-ß1 (TGF-ß1) signaling is a critical pathway in this progression and can induce multiple biological effects. Osteopontin (OPN) is involved in mineral metabolism and the inflammatory response associated with vascular calcification. METHODS: To identify the relationship between TGF-ß signaling pathway and OPN, we stimulated human vascular endothelial cells (HVECs) and human aortic endothelial cells (HAECs) using various concentration of TGF-ß1 in vitro. RESULTS: As assessed by flow cytometry and western blots, apoptosis levels were significantly increased with TGF-ß1 treatment. We also demonstrated that OPN increased in vitro with TGF-ß signaling by western blot and quantitative real time polymerase chain reaction (qRT-PCR) analyses. The inhibitory phosphorylation of endothelial nitric-oxide synthase (eNOS) (Thr495) was also up-regulated by TGF-ß signaling. Meanwhile, the anti-inflammatory factor Nrf2 and the activating phosphorylation of eNOS (Ser1177) were down-regulated. CONCLUSIONS: Taken together, our findings demonstrate that TGF-ß signaling can induce the expression of OPN, which may play an important role in the dysfunction of the vascular wall.

iTRAQ-MS/MS Proteomic Analysis Reveals Differentially Expressed Proteins During Post-harvest Maturation of the White Button Mushroom Agaricus bisporus.

Agaricus bisporus (J. E. Lange) Imbach, well known as the common cultivated mushroom or white button mushroom, is widely cultivated all over the world. We used iTRAQ-MS/MS (i.e., isobaric tags for relative and absolute quantification-coupled two-dimensional liquid chromatography-tandem mass spectrometry) to identify protein expression changes that occur during the post-harvest maturation of Agaricus bisporus fruitbodies at 0, 6, 12, and 48 h after harvest. A total of 5878 unique peptides, representing 1063 proteins, were identified. Quantitative data were obtained from 1012 out of the 1063 proteins. A total of 102, 106, and 160 differentially expressed proteins (>twofolds differences) were identified from samples collected at 6, 12, and 48 h compared to sample from 0 h post harvest, accounting for 10.1, 10.5, and 15.8% of the total proteins identified, respectively. All identified proteins including the differentially expressed proteins among different post-harvest stages were subjected to bioinformatic analysis. Furthermore, seven representative proteins either up or down-regulated at different post-harvest stages were analyzed by real-time PCR. Three out of the seven proteins, the mismatched base pair and cruciform DNA recognition protein, hydrophobin-B and protein transporter, exhibited similar expression patterns as their corresponding proteins. The 260 differentially expressed proteins identified from our study laid a foundation for future studies aiming to understand the post-harvest maturation process of A. bisporus and eventually, might help in the development of breeding program to identify strains with extended shelf life.

From SARS to COVID-19: the role of experience and experts in Hong Kong's initial policy response to an emerging pandemic.

As one of the most densely populated places in the world, Hong Kong fared relatively well in the first year of the COVID-19 pandemic, with a very low number of cases and fatalities per capita. This was mostly due to the Hong Kong government, healthcare workers, and the general public's institutional and individual memory after they successfully overcame the deadly severe acute respiratory syndrome (SARS) epidemic in 2003. However, while Hong Kong was well accustomed to measures such as wearing masks and social distancing, the cooperation of the Hong Kong public to government restrictions was highly affected by its local political context, especially after widespread anti-government protests began mid-2019. This brought the public's trust in government to an all-time low, creating a political 'new normal', which underpinned how COVID-19 policies would be proposed, accepted, and implemented, if at all. To understand how science advice was offered and how public health decisions were made, this research investigates the evolution of Hong Kong's science advisory mechanisms for public health from before SARS, after SARS, and during COVID-19 in 2020, including the roles of key organisations and departments, the establishment of new centres and committees, and the creation of workgroups and expert advisory panels. This paper compares and analyses the reasons behind these differences in science advisory mechanisms between SARS and COVID-19. The findings from this research reinforce the unquestionable need for robust science advisory structures and knowledgeable scientific experts to solve health-related crises, though more research is required to understand the ways in which science advice influences both policy decisions and public acceptance of these policies.

Strong yet flexible ceramic aerogel.

Ceramic aerogels are highly efficient, lightweight, and chemically stable thermal insulation materials but their application is hindered by their brittleness and low strength. Flexible nanostructure-assembled compressible aerogels have been developed to overcome the brittleness but they still show low strength, leading to insufficient load-bearing capacity. Here we designed and fabricated a laminated SiC-SiOx nanowire aerogel that exhibits reversible compressibility, recoverable buckling deformation, ductile tensile deformation, and simultaneous high strength of up to an order of magnitude larger than other ceramic aerogels. The aerogel also shows good thermal stability ranging from -196 °C in liquid nitrogen to above 1200 °C in butane blow torch, and good thermal insulation performance with a thermal conductivity of 39.3 ± 0.4 mW m-1 K-1. These integrated properties make the aerogel a promising candidate for mechanically robust and highly efficient flexible thermal insulation materials.

Influencing factors of coking coal dust explosion pressure and flame and effect of inert dust on its explosion suppression.

Coking coal is a precious resource in the world and an important raw material for the production of steel, but it is easy to cause explosion accidents in the process of coking coal mining, which is very detrimental to safe production. In order to reveal the influencing factors of coking coal dust explosion intensity and the suppression effect of inert dust on coking coal dust explosion, an experimental study was carried out in this paper. The results show that the particle size and the mass concentration of coal dust have a great influence on the explosion pressure and flame. By analyzing the suppression effects of NaCl, KCl, and NH4H2PO4 on coking coal dust explosion, it is got that NH4H2PO4 has the best explosion suppression effect. When the mass percentage of NH4H2PO4 mixed into coking coal dust increases to 60%, the maximum explosion pressure decreases by 0.47 MPa, and the maximum flame length decreases by 0.50 m. As the particle size of NH4H2PO4 decreases, the explosion intensity continue to decrease. When the particle size of NH4H2PO4 is 0 ~ 25 µm, and the mass percentage of NH4H2PO4 mixed into coking coal dust is 50%, the explosion doesn't occur anymore.

Experimental Research on the Suppression Effect of Different Types of Inert Dust on Micron-Sized Lignite Dust Explosion Pressure in a Confined Space.

Coal is an important strategic resource in the world; coal production safety has always been widely concerned. In coal mine production, inert dust can effectively reduce coal dust explosion accidents in mine tunnels. To reveal the suppression effect of inert dust on lignite dust explosion, CaCO3, SiO2, and NH4H2PO4 are selected for suppression experiments. It is found that the lignite dust explosion pressure decreases continuously as the mass percentages of inert dust mixed into lignite dust increase. By calculating the molar mass, the suppression effects of CaCO3 and SiO2 on lignite dust explosion are compared. The lignite dust no longer explodes when the mass percentage of NH4H2PO4 dust mixed into lignite dust is 70%, indicating that NH4H2PO4 is more effective than that of CaCO3 and SiO2. The smaller the particle size of NH4H2PO4, the better the suppression effect on explosion. The lignite dust does not explode when the mass percentage of NH4H2PO4 is 60% and the particle size of NH4H2PO4 is 25-38 µm, which proves that decreasing the particle size of NH4H2PO4 is important to suppress explosion. The research results are of great significance for grasping the explosion suppression effect of inert dust on lignite dust.

Transcriptome Analysis Explored the Differential Genes' Expression During the Development of the Stropharia rugosoannulata Fruiting Body.

Stropharia rugosoannulata (S. rugosoannulata) is a fungus with great edible and nutritional values; however, the development mechanism of its fruiting body has not been studied. Thus, this study aimed to analyze the differentially expressed genes (DEGs) in four stages; primordia stage (Sra1), young mushroom stage (Sra2), picking stage (Sra3), and opening umbrella stage (Sra4). Therefore, total RNA was extracted for further RNA-sequencing analysis. In three pairwise comparison groups (PCGs), Sra1 vs. Sra2, Sra2 vs. Sra3, and Sra3 vs. Sra4, a total of 3,112 DEGs were identified among the three PCGs. A GO analysis of the DEGs showed that there were 21 terms significantly enriched in Sra1 vs. Sra2 PCG. There was no significantly enriched GO term in the other two PCGs. Furthermore, KEGG pathway analysis showed that these DEGs were mainly enriched in glucose and amino acid metabolisms. Moreover we found that intron retention (IR) and the alternative 3' splice site (A3SS) accounted for more than 80%. The development of the S. rugosoannulata fruiting body mainly involved glucose and amino acid metabolisms. IR and A3SS were the two main types of ASE, which played an important role in the development and maturation of the S. rugosoannulata fruiting body.

Metabolomics and transcriptomics unravel the mechanism of browning resistance in Agaricus bisporus.

Agaricus bisporus is widely consumed on the world market. The easy browning of mushroom surface is one of the most intuitive factors affecting consumer purchase. A certain cognition on browning mechanism has been made after years of research. At present, people slow down the browning of mushrooms mainly by improving preservation methods. In addition, breeding is also a reliable way. In the production practice, we have identified some browning-resistant varieties, and we selected a browning-resistant variety to compare with an ordinary variety to reveal the resistance mechanism. Using transcriptomics and metabolomics, the differences in gene expression and metabolite levels were revealed, respectively. The results showed that differentially expressed genes (DEGs) like AbPPO4, AbPPO3 and AbPPO2 were differently expressed and these DEGs were involved in many pathways related to browning. The expression of AbPPO expression play an important role in the browning of A. bisporus and multiple PPO family members are involved in the regulation of browning. However, the resistance to browning cannot be judged only by the expression level of AbPPOs. For metabolomics, most of the different metabolites were organic acids. These organic acids had a higher level in anti-browning (BT) than easy-browning varieties (BS), although the profile was very heterogeneous. On the contrary, the content of trehalose in BS was significantly higher than that in BT. Higher organic acids decreased pH and further inhibited PPO activity. In addition, the BS had a higher content of trehalose, which might play roles in maintaining PPO activity. The difference of browning resistance between BS and BT is mainly due to the differential regulation mechanism of PPO.

Lightweight and Strong Ceramic Network with Exceptional Damage Tolerance.

Lightweight materials such as porous ceramics have attracted increasing attention for applications in energy conservation, aerospace and automobile industries. However, porous ceramics are usually weak and brittle; in particular, tiny defects could cause catastrophic failure, which affects their reliability and limits the potential use greatly. Here we report a SiC/SiO2 nanowire network constructed from numerous well-bonded SiC nanowires coated by a biphasic structure consisting of amorphous SiO2 and nanocrystal SiC. The as-obtained SiC/SiO2 nanowire network is lightweight (360 ± 10 mg cm-3), mechanically strong (compressive strength of 16 MPa), and damage-tolerant. The high strength of the network is attributed to the biphasic mixed structure of the binding coating which can restrict the deformation of nanowires upon compression. The lightweight and strong SiC/SiO2 nanowire network shows potential for engineering applications in harsh environments.

Alternating Multilayered Si3N4/SiC Aerogels for Broadband and High-Temperature Electromagnetic Wave Absorption up to 1000 °C.

Lightweight electromagnetic (EM) wave absorbers made of ceramics have sparked tremendous interest for applications in EM wave interference protection at high temperatures. However, EM wave absorption by pure ceramics still faces huge challenges due to the lack of efficient EM wave attenuation modes. Inspired by the energy dissipation mechanism during fracture of lobster shells with a soft and stiff multilayered structure, we fabricate a high-performance EM wave absorption ceramic aerogel composed of an alternating multilayered wave transparent Si3N4 (N) layer and wave absorption SiC (C) layer by a simple restack method. The obtained N/C aerogel shows ultralow density (∼8 mg/cm3), broad effective absorption bandwidth (8.4 GHz), strong reflection loss (-45 dB) at room temperature, and excellent EM wave absorption performance at high temperatures up to 1000 °C. The attenuation of EM wave mainly results from a "reflection-absorption-zigzag reflection" process caused by the alternating multilayered structure. The superior absorption performance, especially at high temperatures, makes the N/C aerogel promising for next-generation wave absorption devices served in high-temperature environments.

Highly Stretchable, Crack-Insensitive and Compressible Ceramic Aerogel.

Ceramic aerogels are attractive candidates for high-temperature thermal insulation, catalysis support, and ultrafiltration materials, but their practical applications are usually limited by brittleness. Recently, reversible compressibility has been realized in flexible nanostructures-based ceramic aerogels. However, these modified aerogels still show fast and brittle fracture under tension. Herein, we demonstrate achieving reversible stretch and crack insensitivity in a highly compressible ceramic aerogel through engineering its microstructure by using curly SiC-SiOx bicrystal nanowire as the building blocks. The aerogel exhibits large-strain reversible stretch (20%) and good resistance to high-speed tensile fatigue test. Even for a prenotched sample, a reversible stretch at 10% strain is achieved, indicating good crack resistance. The aerogel also displays reversible compressibility up to 80% strain, ultralow thermal conductivity of 28.4 mW m-1 K-1, and excellent thermal stability even at temperatures as high as 1200 °C in butane blow torch or as low as -196 °C in liquid nitrogen. Our findings show that the attractive tensile properties arise from the deformation, interaction, and reorientation of the curly nanowires which could reduce stress concentration and suppress crack initiation and growth during tension. This study not only expands the applicability of ceramic aerogels to conditions involving complex dynamic stress under extreme temperature conditions but also benefits the design of other highly stretchable and crack-resistant porous ceramic materials for various applications.

Hydrophobic SiC@C Nanowire Foam with Broad-Band and Mechanically Controlled Electromagnetic Wave Absorption.

With the booming of modern information technology, electromagnetic wave (EMW) absorption materials are playing more and more crucial roles in applications ranging from wearable smart electronics to national defense security. However, the application of present EMW absorption materials is severely hindered by their drawbacks, such as narrow absorption bandwidth and low absorption intensity. In this work, a series of highly porous and well-interconnected SiC@C nanowire foams (SCNFs) are rationally designed to exhibit modified impedance match and multiscale EMW energy dissipation mechanisms. The SCNF with a density of 108 mg cm-3 realizes a broad absorption bandwidth covering the whole X and Ku bands with an intensity of -52.5 dB. The SCNF with a density of 36 mg cm-3 and a thickness of 9.6 mm exhibits a mechanically controlled absorption band ranging from 2.9 to 18 GHz (covering over 93% of the entire radar band, 2-18 GHz) with a minimum intensity of -46 dB by simply applying a reversible compressive strain from 0 to 66.7%. Moreover, the special microstructure of SCNF also endows it with excellent hydrophobicity, which enables its good self-cleaning property. These encouraging achievements pave the way to the development of the continuous network microstructure of absorbents with a broad-band and tunable EMW absorption property.

Genome Survey and Transcriptome Analysis on Mycelia and Primordia of Agaricus blazei.

Agaricus blazei, a type of edible straw-rotting mushroom with somewhat sweet taste and fragrance of almonds, has attracted considerable scientific and practical attention. High-throughput Illumina PE150 and PacBio RSII platform were employed to generate a genomic sequence. De novo assembly generated 36 contigs with 38,686,133 bp in size, containing 10,119 putative predicted genes. Additionally, we also studied transcriptional regulation of the mycelia and the primordia for exploration of genes involved in fruiting body formation. Expression profiling analysis revealed that 2,164 genes were upregulated in mycelia and 1,557 in primordia. Functional enrichment showed that differentially expressed genes associated with response to stress, ribosome biogenesis, arginine biosynthesis, and steroid biosynthesis pathway were more active in fruiting body. The genome and transcriptome analysis of A. blazei provide valuable sequence resources and contribute to our understanding of genes related to the biosynthesis pathway of polysaccharide and benzaldehyde, as well as the fruiting body formation.

Anisotropic and hierarchical SiC@SiO2 nanowire aerogel with exceptional stiffness and stability for thermal superinsulation.

Ceramic aerogels are promising lightweight and high-efficient thermal insulators for applications in buildings, industry, and aerospace vehicles but are usually limited by their brittleness and structural collapse at high temperatures. In recent years, fabricating nanostructure-based ultralight materials has been proved to be an effective way to realize the resilience of ceramic aerogels. However, the randomly distributed macroscale pores in these architectures usually lead to low stiffness and reduced thermal insulation performance. Here, to overcome these obstacles, a SiC@SiO2 nanowire aerogel with a nanowire-assembled anisotropic and hierarchical microstructure was prepared by using directional freeze casting and subsequent heat treatment. The aerogel exhibits an ultralow thermal conductivity of ~14 mW/m·K, an exceptional high stiffness (a specific modulus of ~24.7 kN·m/kg), and excellent thermal and chemical stabilities even under heating at 1200°C by a butane blow torch, which makes it an ideal thermally superinsulating material for applications under extreme conditions.

Resilient Si3N4 Nanobelt Aerogel as Fire-Resistant and Electromagnetic Wave-Transparent Thermal Insulator.

With the prevailing energy challenges and the rapid development of aerospace engineering, high-performance thermal insulators with various functions are attracting more and more attention. Ceramic aerogels are promising candidates for thermal insulators to be applied in harsh environments because of their low thermal conductivity and simultaneously excellent thermal and chemical stabilities. In general, the effective properties of this class of materials depend on both their microstructures and the intrinsic properties of their building blocks. Herein, to enrich the family and broaden the application fields of this class of materials, we prepared ultralight α-Si3N4 nanobelt aerogels (NBAs) with tunable densities ranging from 1.8 to 9.6 mg cm-3. The α-Si3N4 NBA realized resilient compressibility (with a recoverable strain of 40-80%), fire resistance (1200 °C butane blow torch), thermal insulation (0.029 W m-1 K-1), and electronic wave transparency (a dielectric constant of 1-1.04 and a dielectric loss of 0.001-0.004) in one material, which makes it a promising candidate for mechanical energy dissipative, fire-resistant, and electronic wave-transparent thermal insulator to be applied in extreme conditions. The successful preparation of such resilient and multifunctional α-Si3N4 NBAs will open up a new world for the development and widespread applications of ceramic aerogels.

Emerging WS2/montmorillonite composite nanosheets as an efficient hydrophilic photocatalyst for aqueous phase reactions.

Tungsten disulfide (WS2) as one of transition metal dichalcogenides exhibits excellent catalytic activity. However, its catalytic performances in aqueous phase reactions are limited by its hydrophobicity. Here, the natural hydrophilic two-dimensional clay was used to enhance the dispersibility of WS2 in aqueous phase. WS2/montmorillonite (WS2/MMT) composite nanosheets were prepared via hydrothermal synthesis of WS2 on the surface of montmorillonite from WCl6 and CH3CSNH2. The microstructure and morphology show that WS2 nanosheets are assembled parallelly on the montmorillonite with the interface interaction. Through the support of montmorillonite, WS2/MMT possesses higher photocatalytic ability for aqueous phase reactions than WS2, which could be due to the synergistic effect of higher adsorption property, higher hydrophilicity, dispersibility and more catalytic reaction site. The strategy could provide new ideas for obtaining novel hydrophilic photocatalyst with excellent performance.

Scalable Fabrication of Resilient SiC Nanowires Aerogels with Exceptional High-Temperature Stability.

Resilient ceramic aerogels exhibit great potential for applications in harsh environments owing to their unique combination of ultrahigh porosity, lightweight, reversible compressibility, and good thermal and chemical stabilities. However, their applications are severely restricted by the limited size and low yield due to their complicated and time-consuming synthetic procedures. Herein, we developed an efficient method for large-scale production of resilient SiC nanowire aerogels (SiC NWAGs) with tunable densities and desired shapes. The as-synthesized SiC NWAGs displayed excellent high-temperature stability (the maximum working temperature in Ar and air can reach to 1400 and 1000 °C, respectively), outstanding flame-erosion resistance and low thermal conductivity (25 mW m-1 K-1). The easy fabrication of such ceramic aerogel on a large scale will pave the way for the widespread applications of ceramic aerogels.

Author Correction: Correlations between gut microbiota community structures of Tibetans and geography.

A correction to this article has been published and is linked from the HTML version of this paper. The error has been fixed in the paper.

Correlations between gut microbiota community structures of Tibetans and geography.

Microbial communities of human gut directly influence health and bear adaptive potential to different geography environment and lifestyles. However, knowledge about the influences of altitude and geography on the gut microbiota of Tibetans is currently limited. In this study, fecal microbiota from 208 Tibetans across six different locations were analyzed by MiSeq sequencing; these locations included Gannan, Gangcha, Tianzhu, Hongyuan, Lhasa and Nagqu, with altitudes above sea level ranging from 2800 m to 4500 m across the Tibetan plateau. Significant differences were observed in microbial diversity and richness in different locations. At the phylum level, gut populations of Tibetans comprised Bacteroidetes (60.00%), Firmicutes (29.04%), Proteobacteria (5.40%), and Actinobacteria (3.85%) and were marked by a low ratio (0.48) of Firmicutes to Bacteroidetes. Analysis based on operational taxonomic unit level revealed that core microbiotas included Prevotella, Faecalibacterium, and Blautia, whereas Prevotella predominated all locations, except Gangcha. Four community state types were detected in all samples, and they mainly belong to Prevotella, Bacteroides, and Ruminococcaceae. Principal component analysis and related correspondence analysis results revealed that bacterial profiles in Tibetan guts varied significantly with increasing altitude, BMI, and age, and facultative anaerobes were rich in Tibetan guts. Gut microbiota may play important roles in regulating high-altitude and geographical adaptations.