Interface Density Engineering on Heterogeneous Molybdenum Dichalcogenides Enabling Highly Efficient Hydrogen Evolution Catalysis and Sodium Ion Storage.

Constructing active heterointerfaces is powerful to enhance the electrochemical performances of transition metal dichalcogenides, but the interface density regulation remains a huge challenge. Herein, MoO2 /MoS2 heterogeneous nanorods are encapsulated in nitrogen and sulfur co-doped carbon matrix (MoO2 /MoS2 @NSC) by controllable sulfidation. MoO2 and MoS2 are coupled intimately at atomic level, forming the MoO2 /MoS2 heterointerfaces with different distribution density. Strong electronic interactions are triggered at these MoO2 /MoS2 heterointerfaces for enhancing electron transfer. In alkaline media, the optimal material exhibits outstanding hydrogen evolution reaction (HER) performances that significantly surpass carbon-covered MoS2 nanorods counterpart (η10 : 156 mV vs 232 mV) and most of the MoS2 -based heterostructures reported recently. First-principles calculation deciphers that MoO2 /MoS2 heterointerfaces greatly promote water dissociation and hydrogen atom adsorption via the O-Mo-S electronic bridges during HER process. Moreover, benefited from the high pseudocapacitance contribution, abundant "ion reservoir"-like channels, and low Na+ diffusion barrier appended by high-density MoO2 /MoS2 heterointerfaces, the material delivers high specific capacity of 888 mAh g-1 , remarkable rate capability and cycling stability of 390 cycles at 0.1 A g-1 as the anode of sodium ion battery. This work will undoubtedly light the way of interface density engineering for high-performance electrochemical energy conversion and storage systems.

Monolayer supertubes of Carbon-Armored platinum nanocrystals enabling robust oxygen reduction electrocatalysis.

Self-assembled superstructures composed of nanocrystals (NCs) have shown immense potential for enhancing the performance in electrocatalytic applications. However, there has been limited research on the self-assembly of platinum (Pt) into low-dimensional superstructures as efficient electrocatalysts for oxygen reduction reaction (ORR). In this study, we designed a unique tubular superstructure composed of monolayer or sub-monolayer carbon-armored platinum nanocrystals (Pt NCs) using a template-assisted epitaxial assembly approach. The organic ligands on the surface of Pt NCs were in situ carbonized, resulting in few-layer graphitic carbon shells that encapsulate Pt NCs. Due to their monolayer assembly and tubular geometry, the Pt utilization of the supertubes was 1.5 times higher than that of conventional carbon-supported Pt NCs. As a result, such Pt supertubes exhibit remarkable electrocatalytic performance for the ORR in acidic media, with a high half-wave potential of 0.918 V and a high mass activity of 181 A g-1Pt at 0.9 V, which are comparable to commercial carbon-supported Pt (Pt/C) catalysts. Furthermore, the Pt supertubes demonstrate robust catalytic stability, as confirmed by long-term accelerated durability tests and identical-location transmission electron microscopy. This study presents a new approach to designing Pt superstructures for highly efficient and stable electrocatalysis.

An elegant 3D-ordered hierarchically porous framework to anchor Pt nanocrystals for durable oxygen reduction reaction.

While Platinum (Pt)-based electrocatalysts have been extensively studied for the oxygen reduction reaction (ORR), improving their durability remains a challenge. One promising approach is to design structure-defined carbon supports that can uniformly immobilize Pt nanocrystals (NCs). In this study, we present an innovative strategy for constructing three-dimensional ordered, hierarchically porous carbon polyhedrons (3D-OHPCs) as an efficient support for immobilizing Pt NCs. We achieved this by template-confined pyrolysis of a zinc-based zeolite imidazolate framework (ZIF-8) grown within the voids of polystyrene templates, followed by carbonizing the native oleylamine ligands on Pt NCs to produce graphitic carbon shells. This hierarchical structure enables the uniform anchorage of Pt NCs, while enhancing facile mass transfer and local accessibility of active sites. The optimal material with graphitic carbon armor shells on the surface of Pt NCs (CA-Pt), named CA-Pt@3D-OHPCs-1600, shows comparable activities to commercial Pt/C catalysts. Furthermore, it can withstand over 30,000 cycles of accelerated durability tests, owing to the protective carbon shells and hierarchically ordered porous carbon supports. Our study presents a promising approach for designing highly efficient and durable electrocatalysts for energy-based applications and beyond.

2D FeP Nanoframe Superlattices via Space-Confined Topochemical Transformation.

Self-assembled nanocrystal superlattices represent an emergent class of designer materials with potentially programmable functionalities. The ability to construct hierarchically structured nanocrystal superlattices with tailored geometry and porosity is critical for extending their applications. Here, 2D superlattices comprising monolayer FeP nanoframes are synthesized through a space-confined topochemical transformation approach induced by the Kirkendall effect, using carbon-coated Fe3 O4 nanocube superlattices as a precursor. The particle shape and the close-packed nature of Fe3 O4 nanocubes as well as the interconnected carbon layer network contribute to the topochemical transformation process. The resulting 2D FeP nanoframe superlattices possess several unique and advantageous structural features that are unavailable in conventional 3D nanocrystal superlattices, which make them particularly attractive for catalytic applications. As a proof of concept, such 2D FeP nanoframe superlattices are harnessed as highly efficient and durable electrocatalysts for the hydrogen evolution reaction, the performance of which is superior to that of most FeP-based catalysts reported previously. This topochemical transformation approach is scalable and general, representing a new route of designing hierarchical superlattices with highly open features that cannot be accessible by traditional self-assembly methods.

Amphiphilic Self-Assembly of Nanocrystals at Emulsion Interface Renders Fast and Scalable Quasi-Nanosheet Formation.

Scalable assembly of nanocrystals (NCs) into two-dimensional (2D) nanosheets has aroused great interest, yet it remains under-explored. This is because current 2D assembly methods rely mainly on the use of solid- or liquid-air interfaces, which are inherently difficult for upscaling and thus lack practicability. Here, with a microemulsion-based amphiphilic assembly technique, we achieve a fast and scalable preparation of free-standing nanosheets comprising few-layer, tightly packed NCs, namely, quasi-nanosheets (quasi-NSs). Acetic acid, acting as both solvent and surface-treatment agent, is used to render the initially hydrophobic NCs amphiphilic, while simultaneously inducing the interfacial instability right after the assembly of NCs at the emulsion interface to afford quasi-NSs. This amphiphilic assembly method is applicable to a variety of NCs, and multicomponent quasi-NSs are also attainable upon coassembly of different types of NCs. In addition, the structural advantages of quasi-NSs in catalysis are showcased by using NiFe2O4 quasi-NSs as electrocatalysts for the oxygen evolution reaction. This work opens a new route for the scalable construction of 2D NC sheets with designated components and functions.

Hierarchical Ta-Doped TiO2 Nanorod Arrays with Improved Charge Separation for Photoelectrochemical Water Oxidation under FTO Side Illumination.

TiO2 is one of the most attractive semiconductors for use as a photoanode for photoelectrochemical (PEC) water oxidation. However, the large-scale application of TiO2 photoanodes is restricted due to a short hole diffusion length and low electron mobility, which can be addressed by metal doping and surface decorating. In this paper we report the successful synthesis of hierarchical Ta doped TiO2 nanorod arrays, with nanoparticles on the top (Ta:TiO2), on F-doped tin oxide (FTO) glass by a hydrothermal method, and its application as photoanodes for photoelectrochemical water oxidation. It has been found that the incorporation of Ta5+ in the TiO2 lattice can decrease the diameter of surface TiO2 nanoparticles. Ta:TiO2-140, obtained with a moderate Ta concentration, yields a photocurrent of ∼1.36 mA cm-2 at 1.23 V vs. a reversible hydrogen electrode (RHE) under FTO side illumination. The large photocurrent is attributed to the large interface area of the surface TiO2 nanoparticles and the good electron conductivity due to Ta doping. Besides, the electron trap-free model illustrates that Ta:TiO2 affords higher transport speed and lower electron resistance when under FTO side illumination.

Layered Structure Produced Nonconcentration Quenching in a Novel Eu3+-Doped Phosphor.

Energy migration (energy transfer among identical luminescence centers) is always thought to be related to the concentration quenching in luminescence materials. However, the novel Eu3+-doped Ba6Gd2Ti4O17 phosphor seems to be an exception. In the series of Ba6Gd2(1- x)Ti4O17: xEu3+ ( x = 0.1, 0.3, 0.5, 0.7, and 0.9) phosphors prepared and investigated, no concentration quenching is found. Detailed investigations of the crystal structure and the luminescence properties of Ba6Gd2(1- x)Ti4O17: xEu3+ reveal that the nonoccurrence of concentration quenching is related to the dimensional restriction of energy migration inside the crystal lattices. In Ba6Gd2Ti4O17, directly increasing the number of Eu3+ ions to absorb as much excitation energy as possible allows to achieve a higher brightness. The highly Eu3+-doped Ba6Gd2(1- x)Ti4O17: xEu3+ ( x = 0.9) sample can convert near-UV excitation into red light, whose Commission Internationale de l'Eclairage (CIE) coordinates are (0.64, 0.36) and the color purity can reach up to 94.4%. Moreover, warm white light with the CIE chromaticity coordinates of (0.39, 0.39), the correlated color temperature of 3756 K, and the color rendering index of 82.2 is successfully generated by fabricating this highly Eu3+-doped phosphor in a near-UV light-emitting diode chip together with the green YGAB:Tb3+ and blue BAM:Eu2+ phosphors.