Dilute-and-shoot ICPMS quantification of V, Ni, Co, Cu, Zn, As, Se, Ag, Cd, Ba, and Pb in fruit juices based on matrix overcompensation calibration.

Analysis of V, Co, Ni, Cu, Zn, As, Se, Ag, Cd, Ba, and Pb in fruit juices was performed by inductively coupled plasma mass spectrometry (ICPMS) after simple 50-fold dilution in 1% (v/v) HNO3-0.5% (v/v) HCl-5% (v/v) ethanol. Ethanol was added to overwhelm native organic components and dominate matrix effects. A universal calibration curve was built based on a likewise treated reagent standard series. This new matrix overcompensation calibration (MOC) strategy was developed to effectively compensated for matrix effects of carbon origin and achieved quantitative (92.5-118.8%) recoveries comparable to those by standard addition calibration (92.1-117.8%) and microwave-aided digestion (99.3-116.8%). The LODs were 0.528, 0.204, 0.195, and 2.07 ng mL-1 for toxic elements As, Cd, Pb, and Ni, respectively, adequate for their regulatory monitoring. Ge, Rh, Tb, and Ir were used as internal standards. MOC renders a calibration curve universally applicable to any clear fruit juices of diversified crop, geographic, and manufacturer origins resulting in cost saving and enhanced productivity.

Detection of Arsenic(V) by Fluorescence Sensing Based on Chlorin e6-Copper Ion.

The high toxicity of arsenic (As) can cause irreversible harm to the environment and human health. In this study, the chlorin e6 (Ce6), which emits fluorescence in the infrared region, was introduced as the luminescence center, and the addition of copper ion (Cu2+) and As(V) provoked a regular change in fluorescence at 652 nm, whereas that of As(III) was 665 nm, which was used to optionally detect Cu2+, arsenic (As(III), and As(V)). The limit of detection (LOD) values were 0.212 µM, 0.089 ppm, and 1.375 ppb for Cu2+, As(III), and As(V), respectively. The developed method can be used to determine Cu2+ and arsenic in water and soil with good sensitivity and selectivity. The 1:1 stoichiometry of Ce6 with Cu2+ was obtained from the Job plot that was developed from UV-visible spectra. The binding constants for Cu2+ and As(V) were established to be 1.248 × 105 M-1 and 2.35 × 1012 M-2, respectively, using B-H (Benesi-Hildebrand) plots. Fluorescence lifetimes, B-H plots, FT-IR, and 1H-NMR were used to postulate the mechanism of Cu2+ fluorescence quenching and As(V) fluorescence restoration and the interactions of the two ions with the Ce6 molecule.

Elevated Interleukin-37 Associated with Dengue Viral Load in Patients with Dengue Fever.

Dengue remains a public health issue worldwide. Similar to chronic infectious diseases, stimulation of cytokine production is not enough to drive immune effector cells for effective virus clearance. One possible mechanism is the virus induces a large number of negative stimulatory cytokines inhibiting immune response. Interleukin 37 (IL-37) plays a crucial regulatory role in infection and immunity, inhibits innate and adaptive immunity as an anti-inflammatory cytokine by inhibiting proinflammatory mediators and pathways. To date, there are few studies reporting correlations between dengue fever (DF) and IL-37. In this study we found that the serum IL-37b and IL-37b-producing monocytes in patients were significantly increased in DF patients. A majority of the IL-37b produced by DF patients was produced by monocytes, not lymphocytes. Increased levels of IL-6, IL-10, and IFN-α were also found in DF patients. However, we failed to detect IL-1ß, IL-17A and TNF-α in plasma, because of off-target. In our study, there was no relation between IL-6, IL-10, and IFN-α expressions and IL-37b in serum (P > 0.05). The IL-37b-producing monocytes were negatively correlated with the level of IFN-α in serum and platelet count, and positively correlated with lymphocytes percentage (P < 0.05, respectively). Additionally, serum DENV nonstructural protein 1 levels were positively correlated with monocytes percentages (P < 0.05). Our data represents findings for IL-37b expression and its potential mechanisms in DF patients' immune response.

Tris-Copper Nanozyme as a Novel Laccase Mimic for the Detection and Degradation of Phenolic Compounds.

Phenolic compounds are one of the main organic pollutants in the environment that can seriously affect ecosystems, even at very low concentrations. Due to the resistance of phenolic compounds to microorganisms, conventional biological treatment methods face challenges in effectively addressing this pollution problem. In this study, a novel laccase mimic (Tris-Cu nanozyme) is prepared using a simple and rapid synthesis strategy based on the coordination of copper ions and amino groups in Tris(hydroxymethyl)aminomethane (Tris). It is found that the Tris-Cu nanozyme exhibits good catalytic activity against a variety of phenolic compounds, the Km, Vmax and Kcat are determined to be 0.18 mM, 15.62 µM·min-1 and 1.57 × 107 min-1 using 2,4-dichlorophenol (2,4-DP) as the substrate, respectively. Then, based on the laccase-like activity of the Tris-Cu nanozyme, a novel colorimetric method for 2,4-DP (the limit of detection (LOD) = 2.4 µM, S/N = 3) detection in the range of 10-400 µM was established, and its accuracy was verified by analyzing tap and lake water samples. In addition, the Tris-Cu nanozyme shows excellent removal abilities for six phenolic compounds in experiments. The removal percentages for 2,4-DP, 2-chlorophenol (2-CP), phenol, resorcinol, 2,6-dimethoxyphenol (2,6-DOP), and bisphenol A (BPA) are 100%, 100%, 100%, 100%, 87%, and 81% at 1 h, respectively. In the simulated effluent, the Tris-Cu nanozyme maintains its efficient catalytic activity towards 2,4-DP, with a degradation percentage of 76.36% at 7 min and a reaction rate constant (k0) of 0.2304 min-1. Therefore, this metal-organic complex shows promise for applications in the monitoring and degrading of environmental pollutants.

Preparation of Alcohol Dehydrogenase-Zinc Phosphate Hybrid Nanoflowers through Biomimetic Mineralization and Its Application in the Inhibitor Screening.

A biomimetic mineralization method was used in the facile and rapid preparation of nanoflowers for immobilizing alcohol dehydrogenase (ADH). The method mainly uses ADH as an organic component and zinc phosphate as an inorganic component to prepare flower-like ADH/Zn3(PO4)2 organic-inorganic hybrid nanoflowers (HNFs) with the high specific surface area through a self-assembly process. The synthesis conditions of the ADH HNFs were optimized and its morphology was characterized. Under the optimum enzymatic reaction conditions, the Michaelis-Menten constant (Km) of ADH HNFs (ß-NAD+ as substrate) was measured to be 3.54 mM, and the half-maximal inhibitory concentration (IC50) of the positive control ranitidine (0.2-0.8 mM) was determined to be 0.49 mM. Subsequently, the inhibitory activity of natural medicine Penthorum chinense Pursh and nine small-molecule compounds on ADH was evaluated using ADH HNFs. The inhibition percentage of the aqueous extract of P. chinense is 57.9%. The vanillic acid, protocatechuic acid, gallic acid, and naringenin have obvious inhibitory effects on ADH, and their percentages of inhibition are 55.1%, 68.3%, 61.9%, and 75.5%, respectively. Moreover, molecular docking analysis was applied to explore the binding modes and sites of the four most active small-molecule compounds to ADH. The results of this study can broaden the application of immobilized enzymes through biomimetic mineralization, and provide a reference for the discovery of ADH inhibitors from natural products.

Ultra-High Adsorption Capacity of Core-Shell-Derived Magnetic Zeolite Imidazolate Framework-67 as Adsorbent for Selective Extraction of Theophylline.

A core-shell-derived structural magnetic zeolite imidazolate framework-67 (Fe3O4-COOH@ZIF-67) nanocomposite was fabricated through a single-step coating of zeolite imidazolate framework-67 on glutaric anhydride-functionalized Fe3O4 nanosphere for the magnetic solid-phase extraction (MSPE) of theophylline (TP). The Fe3O4-COOH@ZIF-67 nanocomposite was characterized through scanning electron microscopy, transmission electron microscopy, energy dispersive X-ray spectrometry, Fourier transform infrared spectroscopy, Zeta potential analysis, X-ray diffraction, Brunauer-Emmett-Teller, and vibrating sample magnetometer. The material has a high specific surface area and good magnetism, which maintains the regular dodecahedron structure of ZIF-67 without being destroyed by the addition of Fe3O4-COOH nanospheres. The Fe3O4-COOH@ZIF-67 can rapidly adsorb TP mainly through the strong coordination interaction between undercoordinated Co2+ on ZIF-67 and -NH from imidazole of TP. The adsorption and desorption conditions, such as the amount of adsorbent, adsorption time, pH value, and elution solvent, were optimized. The kinetics of TP adsorption on Fe3O4-COOH@ZIF-67 was found to follow pseudo-second-order kinetics. The Langmuir model fits the adsorption data well and the maximum adsorption capacity is 1764 mg/g. Finally, the developed MSPE-HPLC method was applied in the enrichment and analysis of TP in four tea samples and rabbit plasma. TP was not detected in oolong tea and rabbit plasma, and its contents in jasmine tea, black tea, and green tea are 5.80, 4.31, and 1.53 µg/g, respectively. The recoveries of spiked samples are between 74.41% and 86.07% with RSD in the range of 0.81-3.83%. The adsorption performance of Fe3O4-COOH@ZIF-67 nanocomposite was nearly unchanged after being stored at room temperature for at least 80 days and two consecutive adsorption-desorption cycles. The results demonstrate that Fe3O4-COOH@ZIF-67 nanocomposite is a promising magnetic adsorbent for the preconcentration of TP in complex samples.

Single-Crystal LiNix Mny Co1- x - y O2 Cathodes for Extreme Fast Charging.

Ni-rich layered LiNix Mny Co1- x - y O2 (NMCs, x ≥ 0.8) are poised to be the dominating cathode materials for lithium-ion batteries for the foreseeable future. Conventional polycrystalline NMCs, however, suffer from severe cracking along the grain boundaries of primary particles and capacity loss under high charge and/or discharge rates, hindering their implementation in fast-charging electric vehicular (EV) batteries. Single-crystal (SC) NMCs are attractive alternatives as they eliminate intergranular cracking and allow for grain-level surface optimization for fast Li transport. In the present study, the authors report synthetic approaches to produce SC LiNi0.8 Co0.1 Mn0.1 O2 (NMC811) samples with different morphologies: Oct-SC811 with predominating (012)-family surface and Poly-SC811 with predominating (104)-family surface. Poly-SC811, representing the first experimentally synthesized NMC811 single crystals with (104) surface, delivers superior performance even at the ultra-high rate of 6 C. Through detailed X-ray analysis and electron microscopy characterization, it is shown that the enhanced performance originates from better chemical and structural stabilities, faster Li+ diffusion kinetics, suppressed side reactions with electrolyte, and excellent cracking resistance. These insights provide important design guidelines in the future development of fast-charging NMC-type cathode materials.

Nanozyme based on ZIF-8 for the colorimetric detection of sulfonamides in cow milk.

A simple and time-saving colorimetric method was developed to quantify sulfonamides (SAAs) in milk via inhibition of the human carbonic anhydrase II (hCAII)-like activity of ZIF-8 that can hydrolyze p-nitrophenyl acetate (pNPA) to p-nitrophenol (pNP), following the color change from yellow to colorless. Effects of different reaction conditions, including pH, temperature, amount of ZIF-8, and incubation time, were investigated. The value of Michaelis-Menten constant (Km) is measured to be 0.15 mM, which exhibits high affinity to pNPA. The IC50 (0.17, 0.24, and 0.60 mM) and inhibition constant (Ki) (0.09, 0.13, and 0.33 mM) of sulfamethazine (SD), sulfadimethoxine (SDM), and sulfathiazole (ST) on ZIF-8 were measured, respectively. Moreover, the activity of ZIF-8 remains more than 90.0% of its initial activity after 30 days' storage. The colorimetric method for SD, SDM, and ST determination was established at the linear ranges of 6.3-750.0 µM (1.75-208.75 mg/kg), 6.3-750.0 µM (1.96-232.75 mg/kg), and 5.0-1250.0 µM (1.28-319.15 mg/kg) with limit of detection of 4.3, 3.2, and 3.9 µΜ (1.2, 0.99, and 0.96 mg/kg), respectively. In addition, the spiked recoveries of SAAs in milk sample are in the range of 81.6%-106.7% with RSD less than 6.5%. In short, the developed colorimetric method can achieve rapid analysis of SAAs in milk with simple operations.

Preparation of magnetic metal-organic framework MIL-101(Fe) and its application in the extraction of anthraquinones in rhubarb.

In this work, a magnetic octahedral metal-organic framework (Fe3 O4 @NH2 -MIL-101(Fe)) was synthesized for the magnetic solid-phase extraction of three anthraquinones, including aloe-emodin, emodin, and physcion, in rhubarb. The Fe3 O4 @NH2 -MIL-101(Fe) exhibits a high specific surface area of 259.2 m2 /g with an average pore size of 6.0 nm and high magnetic responsivity of 23.4 emu/g, which may be used as an adsorbent for rapid preconcentration and separation of target analytes. The main parameters for magnetic solid-phase extraction of anthraquinones, including the amount of adsorbent, extraction time, extraction temperature, extraction pH, elution solvent, and elution time, were systematically optimized. The whole extraction process requires a very low amount of adsorbent and a small volume of the sample. Besides, under the optimized conditions, the method shows satisfactory spiked recovery for anthraquinones in the range of 93.3-109.1% and the limits of detection are 1.7-3.4 ng/mL. The relative standard deviations for intra- and inter-day precision are 0.2-1.3% and 0.2-0.6%, respectively. The experimental results indicate that the developed method is feasible for the analysis of anthraquinones in rhubarb.

Zeolitic imidazolate frameworks as light-responsive oxidase-like mimics for the determination of adenosine triphosphate and discrimination of phenolic pollutants.

In this study, 3,3',5,5'-tetramethylbenzidine (TMB) was selected as a chromogenic substrate to evaluate the light-responsive oxidase-like activity of different zeolitic imidazolate frameworks (ZIFs). The synthesized ZIFs were systematically characterized by scanning electron microscopy, transmission electron microscopy, Fourier transform infrared spectroscopy, and X-ray diffraction analysis. Several main operational parameters, including ZIFs and TMB concentrations, pH value, radiation time, and working current, in the reaction process were optimized. The kinetic measurement results show that ZIF-90 exhibits higher affinity to the substrate than horseradish peroxidase. Furthermore, given that adenosine triphosphate (ATP) can specifically combine with Zn2+ binding site and destroy the structure of ZIF-90, a specific and sensitive colorimetric method was established for the quantitative detection of ATP within the range 10 - 240 µM. In addition, on the basis that phenolic pollutants can impact the reaction kinetics diversely on different ZIFs, a sensor array was constructed and successfully applied to differentiate five phenolic pollutants in lake water samples. This work is expected to shed light on the establishment of ZIF-based light-responsive oxidase-like nanozymes for the highly selective colorimetric detection and sensor array.

Multicolor colorimetric assay for copper ion detection based on the etching of gold nanorods.

An effective, selective, and multicolor colorimetric assay for Cu2+ detection based on the regulation of peroxidase-like nanozyme-mediated etching of gold nanorods (Au NRs) is proposed. Cu2+-creatinine complex is selected as the nanozyme that exhibits excellent peroxidase-like activity even in the case of low concentration of Cu2+, which can catalyze 3,3,5,5-tetramethylbenzidine (TMB) to produce oxidized TMB (TMB+) in the presence of hydrogen peroxide, and TMB+ is oxidized to generate TMB2+ after adding H+, and the TMB2+ can etch Au NRs. The determination of Cu2+ is achieved based on the blue shift of the longitudinal localized surface plasmon resonance peak of Au NRs. Under the optimal conditions, the developed colorimetric assay exhibits high sensitivity for the detection of Cu2+ (limit of detection is 0.034 µM) with a wide linear range of 0.05-4.0 µM (R2 = 0.987). The solution shows a rainbow-like color in response to the increase of Cu2+ concentration, which can realize the semi-quantitative detection of Cu2+ by naked eyes. In addition, the developed method exhibits excellent selectivity for Cu2+-detection. The established method was used for the determination of Cu2+ in lake water, soil, and normal human serum with satisfactory recovery of spiked samples.

Investigation on the Peroxidase-like Activity of Vitamin B6 and Its Applications in Colorimetric Detection of Hydrogen Peroxide and Total Antioxidant Capacity Evaluation.

The peroxidase-like activity of vitamin B6 (VB6) was firstly demonstrated by catalyzing the peroxidase chromogenic substrate 3,3',5,5'-tetramethylbenzidine (TMB) at the existence of H2O2. The influence of different factors on the catalytic property of VB6, including pH, temperature, VB6 concentration, and incubation time, were investigated. The steady-state kinetic study results indicate that VB6 possesses higher affinity to H2O2 than natural horseradish peroxidase and some other peroxidase mimics. Besides, the radical quenching experiment results confirm that hydroxyl radical (•OH) accounts for the catalytic process. Based on the excellent peroxidase-like catalytic activity of VB6, the colorimetric methods for H2O2 and gallic acid (GA) detection were developed by measuring the absorbance variance of the catalytic system. Under the optimal conditions, the linear ranges of the methods for H2O2 and GA determination with good selectivity are 50.0-600.0 µM and 10.0-50.0 µM, respectively. In addition, the developed method was applied in the detection of H2O2 in milk samples and evaluation of total antioxidant capacity of different tea infusions. This study may broaden the application prospect of VB6 in environmental and biomedical analysis fields, contribute to profound insight of the physiological functions of VB6, as well as lay foundation for further excavation of small-molecule peroxidase mimics.

A Sensitive and Selective Colorimetric Method Based on the Acetylcholinesterase-like Activity of Zeolitic Imidazolate Framework-8 and Its Applications.

In this study, a simple colorimetric method was established to detect copper ion (Cu2+), sulfathiazole (ST), and glucose based on the acetylcholinesterase (AChE)-like activity of zeolitic imidazolate framework-8 (ZIF-8). The AChE-like activity of ZIF-8 can hydrolyze acetylthiocholine chloride (ATCh) to thiocholine (TCh), which will further react with 5,5'-dithiobis (2-nitrobenzoic acid) (DTNB) to generate 2-nitro-5-thiobenzoic acid (TNB) that has a maximum absorption peak at 405 nm. The effects of different reaction conditions (buffer pH, the volume of ZIF-8, reaction temperature and time, and ATCh concentration) were investigated. Under the optimized conditions, the value of the Michaelis-Menten constant (Km) is measured to be 0.83 mM, which shows a high affinity toward the substrate (ATCh). Meanwhile, the ZIF-8 has good storage stability, which can maintain more than 80.0% of its initial activity after 30 days of storage at room temperature, and the relative standard deviation (RSD) of batch-to-batch (n = 3) is 5.1%. The linear dependences are obtained based on the AChE-like activity of ZIF-8 for the detection of Cu2+, ST, and glucose in the ranges of 0.021-1.34 and 5.38-689.66 µM, 43.10-517.24 µM, and 0.0054-1.40 mM, respectively. The limit of detections (LODs) are calculated to be 20.00 nM, 9.25 µM, and 5.24 µM, respectively. Moreover, the sample spiked recoveries of Cu2+ in lake water, ST in milk, and glucose in strawberry samples were measured, and the results are in the range of 98.4-115.4% with the RSD (n = 3) lower than 3.3%. In addition, the method shows high selectivity in the real sample analysis.

Novel Dielectric Barrier Discharge Trap for Arsenic Introduced by Electrothermal Vaporization: Possible Mechanism and Its Application.

In this work, a novel integrated dielectric barrier discharge (IDBD) reactor coupled to an electrothermal vaporizer (ETV) was established for arsenic determination. It is for the first time gas-phase enrichment (GPE) was fulfilled based on the hyphenation of ETV and DBD. The mechanisms of evolution of arsenic atomic and molecular species during vaporization, transportation, trapping, and release processes were investigated via X-ray photoelectron spectroscopy (XPS) and other approaches. Tentative mechanisms were deduced as follows: the newly designed DBD atomizer (DBDA) tube upstream to the air inlet fulfills the atomization of arsenic nanoparticles in vaporized aerosol, leading to free arsenic atoms that are indispensable for forming arsenic oxides; the DBD trap (DBDT) tube traps arsenic oxides under an O2-domininating atmosphere and then releases arsenic atoms under H2-dominating atmospheres. In essence, this process is a physical-chemical process rather than an electrostatic particle deposition. Such a trap and release sequence separates matrix interference and enhances analytical sensitivity. Under the optimized conditions, the method detection limit (LOD) was 0.04 mg/kg and the relative standard deviations (RSDs) were within 6% for As standard solution and real seafood samples, indicating adequate analytical sensitivity and precision. The mean spiked recoveries for laver, kelp, and Undaria pinnatifida samples were 95-110%, and the results of the certified reference materials (CRMs) were consistent with certified values. This ETV-DBD preconcentration scheme is easy and green and has low cost for As analysis in seafood samples. DBD was proved a novel ETV transportation enhancement and preconcentration technique for arsenic, revealing its potential in rapid arsenic analysis based on direct solid sampling ETV instrumentation.

A portable personal glucose meter method for enzyme activity detection and inhibitory activity evaluation based on alkaline phosphatase-mediated reaction.

In this study, an effective and portable method for enzyme activity detection and inhibitory activity evaluation was developed based on the alkaline phosphatase (ALP)-mediated reaction in a personal glucose meter (PGM). In this method, ALP catalyzes the hydrolysis of substrate amifostine (WR-2721) to produce ethanethiol (WR-1065), which can trigger the reduction of ferricyanide (K3[Fe(CN)6]), an electron transfer mediator in glucose test strips, to ferrocyanide ([K4Fe(CN)6]) and generate a PGM-detectable signal. Thus, WR-1065 can be directly quantified by a PGM as simply as detecting glucose in blood. After being systematically optimized, the method was applied to evaluate the inhibitory activity of ten small-molecule compounds and six Cordyceps sinensis (CS) extracts on ALP. The results showed that adenosine-5-monophosphate and theophylline had high inhibitory activity, but two CS extracts have promotion potency on ALP with the values of -20.7 ± 1.3% and -46.6 ± 2.1%, respectively. Moreover, the binding sites and modes of small-molecule compounds to ALP were investigated by molecular docking, while a new substrate competitor with theoretically good inhibitory activity against ALP was designed by scaffold hopping. Finally, the accuracy of the PGM method for enzyme activity detection was assessed by detecting ALP from milk samples, and the recovery ranged from 87.7% to 116.9%. These results indicate that it is feasible to evaluate enzyme activity and the inhibitory activity of small-molecule compounds and CS extracts on ALP using a PGM based on ALP-mediated reaction. Graphical abstract.

Preparation of a zirconium terephthalate metal-organic framework coated magnetic nanoparticle for the extraction of berberine prior to high-performance liquid chromatography analysis.

In this study, a zirconium terephthalate metal-organic framework-coated magnetic nanoparticle (UiO-66@PA@PEI@Fe3 O4 ) was synthesized for the extraction of berberine prior to high-performance liquid chromatography analysis. The phytic acid, which could be grafted onto the magnetic nanoparticle through electrostatic interaction with the abundant amino groups of polyethylenimine, possesses outstanding metal ion coordination ability for the immobilization of metal-organic frameworks UiO-66. The physicochemical properties of the obtained nanoparticle were thoroughly investigated by a series of characterization techniques. Then, the factors that will affect the extraction efficiency and recovery of berberine were investigated. Results indicated that the material had good stability and reusability, and high adsorption capacity (50.01 mg/g) to berberine through single-layer adsorption. In addition, a molecular docking study indicated that the interactions between the material and berberine were mainly π-π stacking and hydrophobic interaction. Finally, the material was successfully applied to the extraction of berberine in Rhizoma Coptidis and Cortex Phellodendri extracts with the recoveries of 76.1% and 71.6%, respectively.

Effect of water activity on inactivation of Listeria monocytogenes using gaseous chlorine dioxide - A kinetic analysis.

The aim of this study was to investigate the effect of water activity (aw) on inactivation of Listeria monocytogenes using gaseous chlorine dioxide (ClO2 (g)) under room temperature. Surface-inoculated tryptic soy agar (TSA) plates adjusted to 9 different water activity levels ranging from 0.994 to 0.429 were used as samples exposed to ClO2 (g) at 150, 250, and 350 ppm for different durations of treatment time. Results showed that the antimicrobial effect of ClO2 (g) significantly decreases as the aw level and ClO2 (g) concentration decrease. Nonlinear models, such as the modified Chick model and the Weibull model, were used to describe the inactivation kinetics of L. monocytogenes. The results showed that the modified Chick model, which is based on chemical reaction kinetics, was more suitable to describe the inactivation of L. monocytogenes (RMSE < 0.5 log CFU/g) than the Weibull model (RMSE < 1.0 log CFU/g). A multiple regression model was developed for the describing the effect of aw and ClO2 (g) concentration on bacterial inactivation. The results of this study may be used to design ClO2 (g) treatment processes to inactivate L. monocytogenes in low-moisture foods.

Personal Glucose Meter for α-Glucosidase Inhibitor Screening Based on the Hydrolysis of Maltose.

As a key enzyme regulating postprandial blood glucose, α-Glucosidase is considered to be an effective target for the treatment of diabetes mellitus. In this study, a simple, rapid, and effective method for enzyme inhibitors screening assay was established based on α-glucosidase catalyzes reactions in a personal glucose meter (PGM). α-glucosidase catalyzes the hydrolysis of maltose to produce glucose, which triggers the reduction of ferricyanide (K3[Fe(CN)6]) to ferrocyanide (K4[Fe(CN)6]) and generates the PGM detectable signals. When the α-glucosidase inhibitor (such as acarbose) is added, the yield of glucose and the readout of PGM decreased accordingly. This method can achieve the direct determination of α-glucosidase activity by the PGM as simple as the blood glucose tests. Under the optimal experimental conditions, the developed method was applied to evaluate the inhibitory activity of thirty-four small-molecule compounds and eighteen medicinal plants extracts on α-glucosidase. The results exhibit that lithospermic acid (52.5 ± 3.0%) and protocatechualdehyde (36.8 ± 2.8%) have higher inhibitory activity than that of positive control acarbose (31.5 ± 2.5%) at the same final concentration of 5.0 mM. Besides, the lemon extract has a good inhibitory effect on α-glucosidase with a percentage of inhibition of 43.3 ± 3.5%. Finally, the binding sites and modes of four active small-molecule compounds to α-glucosidase were investigated by molecular docking analysis. These results indicate that the PGM method is feasible to screening inhibitors from natural products with simple and rapid operations.

Evaluation of Enzyme Inhibitory Activity of Flavonoids by Polydopamine-Modified Hollow Fiber-Immobilized Xanthine Oxidase.

In this study, a polydopamine (PDA)-modified hollow fiber-immobilized xanthine oxidase (XOD) was prepared for screening potential XOD inhibitors from flavonoids. Several parameters for the preparation of PDA-modified hollow fiber-immobilized XOD, including the dopamine concentration, modification time, XOD concentration and immobilization time, were optimized. The results show that the optimal conditions for immobilized XOD activity were a dopamine concentration of 2.0 mg/mL in 10.0 mM Tris-HCl buffer (pH 8.5), a modification time of 3.0 h, an XOD concentration of 1000 µg/mL in 10.0 mM phosphate buffer (pH 7.5) and an immobilization time of 3.0 h. Subsequently, the enzymatic reaction conditions such as the pH value and temperature were investigated, and the enzyme kinetics and inhibition parameters were determined. The results indicate that the optimal pH value (7.5) and temperature (37 °C) of the PDA-modified hollow fiber-immobilized XOD were consistent with the free enzyme. Moreover, the PDA-modified hollow fiber-immobilized XOD could still maintain above 50% of its initial immobilized enzyme activity after seven consecutive cycles. The Michaelis-Menten constant (Km) and the half-maximal inhibitory concentration (IC50) of allopurinol on the immobilized XOD were determined as 0.25 mM and 23.2 µM, respectively. Furthermore, the PDA-modified hollow fiber-immobilized XOD was successfully applied to evaluate the inhibitory activity of eight flavonoids. Quercetin, apigenin, puerarin and epigallocatechin showed a good inhibition effect, and their percentages of inhibition were (79.86 ± 3.50)%, (80.98 ± 0.64)%, (61.15 ± 6.26)% and (54.92 ± 0.41)%, respectively. Finally, molecular docking analysis further verified that these four active compounds could bind to the amino acid residues in the XOD active site. In summary, the PDA-modified hollow fiber-immobilized XOD is an efficient method for the primary screening of XOD inhibitors from natural products.

Role of Redox-Inactive Transition-Metals in the Behavior of Cation-Disordered Rocksalt Cathodes.

Owing to the capacity boost from oxygen redox activities, Li-rich cation-disordered rocksalts (LRCDRS) represent a new class of promising high-energy Li-ion battery cathode materials. Redox-inactive transition-metal (TM) cations, typically d0 TM, are essential in the formation of rocksalt phases, however, their role in electrochemical performance and cathode stability is largely unknown. In the present study, the effect of two d0 TM (Nb5+ and Ti4+ ) is systematically compared on the redox chemistry of Mn-based model LRCDRS cathodes, namely Li1.3 Nb0.3 Mn0.4 O2 (LNMO), Li1.25 Nb0.15 Ti0.2 Mn0.4 O2 (LNTMO), and Li1.2 Ti0.4 Mn0.4 O2 (LTMO). Although electrochemically inactive, d0 TM serves as a modulator for oxygen redox, with Nb5+ significantly enhancing initial charge storage contribution from oxygen redox. Further studies using differential electrochemical mass spectroscopy and resonant inelastic X-ray scattering reveal that Ti4+ is better in stabilizing the oxidized oxygen anions (On - , 0 < n < 2), leading to a more reversible O redox process with less oxygen gas release. As a result, much improved chemical, structural and cycling stabilities are achieved on LTMO. Detailed evaluation on the effect of d0 TM on degradation mechanism further suggests that proper design of redox-inactive TM cations provides an important avenue to balanced capacity and stability in this newer class of cathode materials.