The Role of Retinal Dopamine D1 Receptors in Ocular Growth and Myopia Development in Mice.

Dopamine is a key neurotransmitter in the signaling cascade controlling ocular refractive development, but the exact role and site of action of dopamine D1 receptors (D1Rs) involved in myopia remains unclear. Here, we determine whether retinal D1Rs exclusively mediate the effects of endogenous dopamine and systemically delivered D1R agonist or antagonist in the mouse form deprivation myopia (FDM) model. Male C57BL/6 mice subjected to unilateral FDM or unobstructed vision were divided into the following four groups: one noninjected and three groups that received intraperitoneal injections of a vehicle, D1R agonist SKF38393 (18 and 59 nmol/g), or D1R antagonist SCH39166 (0.1 and 1 nmol/g). The effects of these drugs on FDM were further assessed in Drd1-knock-out (Drd1-KO), retina-specific conditional Drd1-KO (Drd1-CKO) mice, and corresponding wild-type littermates. In the visually unobstructed group, neither SKF38393 nor SCH39166 affected normal refractive development, whereas myopia development was attenuated by SKF38393 and enhanced by SCH39166 injections. In Drd1-KO or Drd1-CKO mice, however, these drugs had no effect on FDM development, suggesting that activation of retinal D1Rs is pertinent to myopia suppression by the D1R agonist. Interestingly, the development of myopia was unchanged by either Drd1-KO or Drd1-CKO, and neither SKF38393 nor SCH39166 injections, nor Drd1-KO, affected the retinal or vitreal dopamine and the dopamine metabolite DOPAC levels. Effects on axial length were less marked than effects on refraction. Therefore, activation of D1Rs, specifically retinal D1Rs, inhibits myopia development in mice. These results also suggest that multiple dopamine D1R mechanisms play roles in emmetropization and myopia development.SIGNIFICANCE STATEMENT While dopamine is recognized as a "stop" signal that inhibits myopia development (myopization), the location of the dopamine D1 receptors (D1Rs) that mediate this action remains to be addressed. Answers to this key question are critical for understanding how dopaminergic systems regulate ocular growth and refraction. We report here the results of our study showing that D1Rs are essential for controlling ocular growth and myopia development in mice, and for identifying the retina as the site of action for dopaminergic control via D1Rs. These findings highlight the importance of intrinsic retinal dopaminergic mechanisms for the regulation of ocular growth and suggest specific avenues for exploring the retinal mechanisms involved in the dopaminergic control of emmetropization and myopization.

N and OH-Immobilized Cu3 Clusters In Situ Reconstructed from Single-Metal Sites for Efficient CO2 Electromethanation in Bicontinuous Mesochannels.

Cu-based catalysts hold promise for electrifying CO2 to produce methane, an extensively used fuel. However, the activity and selectivity remain insufficient due to the lack of catalyst design principles to steer complex CO2 reduction pathways. Herein, we develop a concept to design carbon-supported Cu catalysts by regulating Cu active sites' atomic-scale structures and engineering the carbon support's mesoscale architecture. This aims to provide a favorable local reaction microenvironment for a selective CO2 reduction pathway to methane. In situ X-ray absorption and Raman spectroscopy analyses reveal the dynamic reconstruction of nitrogen and hydroxyl-immobilized Cu3 (N,OH-Cu3) clusters derived from atomically dispersed Cu-N3 sites under realistic CO2 reduction conditions. The N,OH-Cu3 sites possess moderate *CO adsorption affinity and a low barrier for *CO hydrogenation, enabling intrinsically selective CO2-to-CH4 reduction compared to the C-C coupling with a high energy barrier. Importantly, a block copolymer-derived carbon fiber support with interconnected mesopores is constructed. The unique long-range mesochannels offer an H2O-deficient microenvironment and prolong the transport path for the CO intermediate, which could suppress the hydrogen evolution reaction and favor deep CO2 reduction toward methane formation. Thus, the newly developed catalyst consisting of in situ constructed N,OH-Cu3 active sites embedded into bicontinuous carbon mesochannels achieved an unprecedented Faradaic efficiency of 74.2% for the CO2 reduction to methane at an industry-level current density of 300 mA cm-2. This work explores effective concepts for steering desirable reaction pathways in complex interfacial catalytic systems via modulating active site structures at the atomic level and engineering pore architectures of supports on the mesoscale to create favorable microenvironments.

Recent Progress of Low-Dimensional Metal-Organic Frameworks for Aqueous Zinc-Based Batteries.

Aqueous zinc-based batteries (AZBs) are promising energy storage solutions with remarkable safety, abundant Zn reserve, cost-effectiveness, and relatively high energy density. However, AZBs still face challenges such as anode dendrite formation that reduces cycling stability and limited cathode capacity. Recently, low-dimensional metal-organic frameworks (LD MOFs) and their derivatives have emerged as promising candidates for improving the electrochemical performance of AZBs owing to their unique morphologies, high structure tunability, high surface areas, and high porosity. However, clear guidelines for developing LD MOF-based materials for high-performance AZBs are scarce. In this review, the recent progress of LD MOF-based materials for AZBs is critically examined. The typical synthesis methods and structural design strategies for improving the electrochemical performance of LD MOF-based materials for AZBs are first introduced. The recent noteworthy research achievements are systematically discussed and categorized based on their applications in different AZB components, including cathodes, anodes, separators, and electrolytes. Finally, the limitations are addressed and the future perspectives are outlined for LD MOFs and their derivatives in AZB applications. This review provides clear guidance for designing high-performance LD MOF-based materials for advanced AZBs.

Pretreatment prediction for IVF outcomes: generalized applicable model or centre-specific model?

STUDY QUESTION: What was the performance of different pretreatment prediction models for IVF, which were developed based on UK/US population (McLernon 2016 model, Luke model, Dhillon model, and McLernon 2022 model), in wider populations? SUMMARY ANSWER: For a patient in China, the published pretreatment prediction models based on the UK/US population provide similar discriminatory power with reasonable AUCs and underestimated predictions. WHAT IS KNOWN ALREADY: Several pretreatment prediction models for IVF allow patients and clinicians to estimate the cumulative probability of live birth in a cycle before the treatment, but they are mostly based on the population of Europe or the USA, and their performance and applicability in the countries and regions beyond these regions are largely unknown. STUDY DESIGN, SIZE, DURATION: A total of 26 382 Chinese patients underwent oocyte pick-up cycles between January 2013 and December 2020. PARTICIPANTS/MATERIALS, SETTING, METHODS: UK/US model performance was externally validated according to the coefficients and intercepts they provided. Centre-specific models were established with XGboost, Lasso, and generalized linear model algorithms. Discriminatory power and calibration of the models were compared as the forms of the AUC of the Receiver Operator Characteristic and calibration curves. MAIN RESULTS AND THE ROLE OF CHANCE: The AUCs for McLernon 2016 model, Luke model, Dhillon model, and McLernon 2022 model were 0.69 (95% CI 0.68-0.69), 0.67 (95% CI 0.67-0.68), 0.69 (95% CI 0.68-0.69), and 0.67 (95% CI 0.67-0.68), respectively. The centre-specific yielded an AUC of 0.71 (95% CI 0.71-0.72) with key predictors including age, duration of infertility, and endocrine parameters. All external models suggested underestimation. Among the external models, the rescaled McLernon 2022 model demonstrated the best calibration (Slope 1.12, intercept 0.06). LIMITATIONS, REASONS FOR CAUTION: The study is limited by its single-centre design and may not be representative elsewhere. Only per-complete cycle validation was carried out to provide a similar framework to compare different models in the sample population. Newer predictors, such as AMH, were not used. WIDER IMPLICATIONS OF THE FINDINGS: Existing pretreatment prediction models for IVF may be used to provide useful discriminatory power in populations different from those on which they were developed. However, models based on newer more relevant datasets may provide better calibrations. STUDY FUNDING/COMPETING INTEREST(S): This work was supported by the National Natural Science Foundation of China [grant number 22176159], the Xiamen Medical Advantage Subspecialty Construction Project [grant number 2018296], and the Special Fund for Clinical and Scientific Research of Chinese Medical Association [grant number 18010360765]. TRIAL REGISTRATION NUMBER: N/A.

The association between the basal metabolic rate and cardiovascular disease: A two-sample Mendelian randomization study.

BACKGROUND: Mendelian randomization analysis was applied to elucidate the causal relationship between the basal metabolic rate (BMR) and common cardiovascular diseases. METHOD: We choose BMR as exposure. BMR is the metabolic rate of the body when the basic physiological activities (blood circulation, breathing and constant body temperature) are maintained. The normal BMR is 1507 kcal/day for men and 1276 kcal/day for women. The dataset was drawn from the public GWAS dataset (GWAS ID: ukb-a-268), collected and analysed by UK biobank, containing 331,307 European males and females. SNPs independently and strongly associated with BMR were used as instrumental variables in the inverse variance weighted analysis. MR-Egger, weighted median, MR pleiotropy residual sum, and outlier methods were also performed, and the sensitivity was evaluated using horizontal pleiotropy and heterogeneity analyses to ensure the stability of the results. RESULTS: An increased BMR is associated with a higher risk of cardiomyopathy (odds ratio [OR] = 2.00, 95% confidence interval [CI], 1.57-2.54, p = 1.87 × 10-8), heart failure (OR = 1.39, 95% CI, 1.27-2.51, p = 8.1 × 10-13), and valvular heart disease (OR = 1.18, 95% CI, 1.10-1.27, p = .00001). However, there was no clear association between BMR and the subtypes of other cardiovascular diseases, such as coronary disease (OR = .96, 95% CI, .85-1.08, p = .48651) and atrial fibrillation (AF) (OR = 1.85, 95% CI, 1.70-2.02, p = 6.28 × 10-44). CONCLUSION: Our study reveals a possible causal effect of BMR on the risk of cardiomyopathy, heart failure and valvular disease, but not for coronary disease and AF.

Piezo1 (Piezo-Type Mechanosensitive Ion Channel Component 1)-Mediated Mechanosensation in Macrophages Impairs Perfusion Recovery After Hindlimb Ischemia in Mice.

BACKGROUND: Angiogenesis is a promising strategy for those with peripheral artery disease. Macrophage-centered inflammation is intended to govern the deficiency of the angiogenic response after hindlimb ischemia. However, little is known about the mechanism of macrophage activation beyond signals from cytokines and chemokines. We sought to identify a novel mechanical signal from the ischemic microenvironment that provokes macrophages and the subsequent inflammatory cascade and to investigate the potential role of Piezo-type mechanosensitive ion channels (Piezo) on macrophages during this process. METHODS: Myeloid cell-specific Piezo1 (Piezo-type mechanosensitive ion channel component 1) knockout (Piezo1ΔMΦ) mice were generated by crossing Piezo1fl/fl (LysM-Cre-/-; Piezo1 flox/flox) mice with LysM-Cre transgenic mice to assess the roles of Piezo1 in macrophages after hindlimb ischemia. Furthermore, in vitro studies were carried out in bone marrow-derived macrophages to decipher the underlying mechanism. RESULTS: We found that tissue stiffness gradually increased after hindlimb ischemia, as indicated by Young's modulus. Compared to Piezo2, Piezo1 expression and activation were markedly upregulated in macrophages from ischemic tissues in concurrence with increased tissue stiffness. Piezo1ΔMΦ mice exhibited improved perfusion recovery by enhancing angiogenesis. Matrigel tube formation assays revealed that Piezo1 deletion promoted angiogenesis by enhancing FGF2 (fibroblast growth factor-2) paracrine signaling in macrophages. Conversely, activation of Piezo1 by increased stiffness or the agonist Yoda1 led to reduced FGF2 production in bone marrow-derived macrophages, which could be blocked by Piezo1 silencing. Mechanistically, Piezo1 mediated extracellular Ca2+ influx and activated Ca2+-dependent CaMKII (calcium/calmodulin-dependent protein kinase II)/ETS1 (ETS proto-oncogene 1) signaling, leading to transcriptional inactivation of FGF2. CONCLUSIONS: This study uncovers a crucial role of microenvironmental stiffness in exacerbating the macrophage-dependent deficient angiogenic response. Deletion of macrophage Piezo1 promotes perfusion recovery after hindlimb ischemia through CaMKII/ETS1-mediated transcriptional activation of FGF2. This provides a promising therapeutic strategy to enhance angiogenesis in ischemic diseases.

A Scalable Ultramicroporous Coordination Network for Ethylene Separation from the Quaternary Mixture.

Adsorptive ethylene separation from the C2H2/C2H4/C2H6/CO2 four-component gas mixture provides a low-energy input solution for industrial ethylene purification, yet it is still a great challenge. Herein, we report a facile scaled-up synthesis of a stable ultramicroporous coordination network of Zn-CO3-datz (Hdatz = 3,5-diamine-1,2,4-triazole), which enables selective adsorption of C2H2, C2H4 and CO2 over C2H4, thanks to its specific pore environment supported by GCMC simulation of gas adsorption sites. Dynamic breakthrough experiments exhibited efficient one-step production of polymer-grade (≥99.95%) C2H4 from the quaternary C2H4/C2H2/C2H6/CO2 (1/1/1/1) mixture, with excellent C2H4 productivity of 0.12 mol kg-1 at 298 K. Moreover, it can be easily synthesized in kilogram scale with an affordable and low-cost ligand, rendering its further potential industrial applications.

Ambient air pollution decreased normal fertilization rate via the mediation of seminal prosaposin.

OBJECTIVE: This study focuses on the association between seminal concentration of prosaposin and ambient air pollutants and whether the association affects the normal fertilization rate in vitro fertilization (IVF) treatment. METHODS: The cohort of 323 couple participants aged 22-46 was recruited from Jan. 2013 to Jun. 2018. At enrollment, resident address information was obtained and semen parameters of male counterparts were evaluated according to WHO criteria. We used inverse distance weighting interpolation to estimate the levels of ambient pollutants (SO2, O3, CO, NO2, PM2.5, and PM10) in the surrounding area. The exposure of each participant was estimated based on the data gathered from air quality monitoring stations and their home address over various periods (0-9, 10-14, and 0-90 days) before semen sampling. The generalized linear regression model (GLM) and the Bayesian kernel machine regression (BKMR) were used to analyze the associations between pollutants, semen parameters, prosaposin, and normal fertilization. Additionally, the mediating effect of prosaposin and semen parameters on the link between pollutants and normal fertilization was investigated. RESULTS: GLM and BKMR showed exposure to ambient air pollutants was all associated with the concentration of seminal prosaposin, among them, O3 and CO were also associated with normal fertilization (-0.10, 95 %CI: -0.13, -0.06; -26.43, 95 %CI: -33.79, -19.07). Among the semen parameters, only the concentration of prosaposin and total motile sperm count (TMC) was associated with normal fertilization (0.059, 95 %CI: 0.047, 0.071; 0.016, 95 %CI: 0.012, 0.020). Mediation analysis showed that prosaposin played a stronger mediating role than TMC in the relationship between short-term exposure to O3 and fertilization (66.83 %, P<0.001 versus 3.05 %, P>0.05). CONCLUSION: Seminal plasma prosaposin showed a stronger meditating effect reflect the correlation between ambient air pollutants and normal fertilization rate than conventional semen parameters, which may be used as one of the indicators between pollution and fertilization in IVF.

Does cleavage stage morphology increase the discriminatory power of prediction in blastocyst transfer outcome?

PURPOSE: To evaluate the contribution of the cleavage stage morphological parameters to the prediction of blastocyst transfer outcomes. METHODS: A retrospective study was conducted on 8383 single-blastocyst transfer cycles including 2246 fresh and 6137 vitrified-warmed cycles. XGboost, LASSO, and GLM algorithms were employed to establish models for assessing the predictive value of the cleavage stage morphological parameters in transfer outcomes. Four models were developed using each algorithm: all-in model with or without day 3 morphology and embryo quality-only model with or without day 3 morphology. RESULTS: The live birth rate was 48.04% in the overall cohort. The AUCs of the models with the algorithm of XGboost were 0.83, 0.82, 0.63, and 0.60; with LASSO were 0.66, 0.66, 0.61, and 0.60; and with GLM were 0.66, 0.66, 0.61, and 0.60 respectively. In models 1 and 2, female age, basal FSH, peak E2, endometrial thickness, and female BMI were the top five critical features for predicting live birth; In models 3 and 4, the most crucial factor was blastocyst formation on D5 rather than D6. In model 3, incorporating cleavage stage morphology, including early cleavage, D3 cell number, and fragmentation, was significantly associated with successful live birth. Additionally, the live birth rates for blastocysts derived from on-time, slow, and fast D3 embryos were 49.7%, 39.5%, and 52%, respectively. CONCLUSIONS: The value of cleavage stage morphological parameters in predicting the live birth outcome of single blastocyst transfer is limited.

Metal Selenide-Based Superstructure Nanoarrays with Ultrahigh Capacity for Alkaline Zn Batteries.

Transition metal selenides (TMSs) have great potential as cathode materials for alkaline Zn batteries (AZBs) owing to their high theoretical capacity and metallic conductivity. However, achieving a high specific capacity remains a formidable challenge due to the low structural stability and sluggish reaction kinetics of single-phase TMS. Herein, a facile method for fabricating a robust CoSe2 @Ni3 Se4 @Ni(OH)2 superstructure nanoarray (CNSNA) as an AZB cathode is presented. The sophisticated design enables structural stability and abundant active surface sites for efficient charge storage. Furthermore, the redox mediator K3 [Fe(CN)6 ] is employed to expedite the reaction kinetics and introduce supplementary redox reactions, further enhancing the charge storage capability. Consequently, the CNSNA electrode delivers an exceptional specific capacitance (609.08 mAh g-1 at 1 A g-1 ), surpassing all previously reported selenide-based materials. High-rate capability (239.37 mAh g-1 at 20 A g-1 ) and long cycling stability have also been achieved. The comprehensive charge storage mechanism studies confirmed the structural integrity, kinetic improvement, and high reactivity of the CNSNA superstructure. Moreover, the corresponding AZB based on CNSNA demonstrates an extraordinarily high energy density of 516.58 Wh kg-1 . The work offers guidance in the construction of superstructure-based TMS electrode materials, paving the way for the development of high-performance AZBs.

Rocuronium bromide suppresses esophageal cancer via blocking the secretion of C-X-C motif chemokine ligand 12 from cancer associated fibroblasts.

BACKGROUND: Cancer associated fibroblasts (CAFs) communicate metabolically with tumor genesis and development. Rocuronium bromide (RB) is reported to exert certain inhibitory effect on tumor. Here, we investigate the role of RB in esophageal cancer (EC) malignant progression. METHODS: Tumor xenograft models with EC cells were locally and systemically administrated with RB to detect the influence of different administrations on tumor progression. Mouse CAFs PDGFRα+/F4/80- were sorted by Flow cytometry with specific antibodies. CAFs were treated with RB and co-cultured with EC cells. The proliferation, invasion and apoptosis assays of EC cells were performed to detect the influences of RB targeting CAFs on EC cell malignant progression. Human fibroblasts were employed to perform these detections to confirm RB indirect effect on EC cells. The gene expression changes of CAFs response to RB treatment were detected using RNA sequencing and verified by Western blot, immunohistochemistry and ELISA. RESULTS: Tumors in xenograft mice were observed significantly inhibited by local RB administration, but not by systemic administration. Moreover EC cells did not show obvious change in viability when direct stimulated with RB in vitro. However, when CAFs treated with RB were co-cultured with EC cells, obvious suppressions were observed in EC cell malignancy, including proliferation, invasion and apoptosis. Human fibroblasts were employed to perform these assays and similar results were obtained. RNA sequencing data of human fibroblast treated with RB, and Western blot, immunohistochemistry and ELISA results all showed that CXCL12 expression was significantly diminished in vivo and in vitro by RB. EC cells direct treated with CXCL12 showed much higher malignancy. Moreover cell autophagy and PI3K/AKT/mTOR signaling pathway in CAFs were both suppressed by RB which can be reversed by Rapamycin pretreatment. CONCLUSIONS: Our data suggest that RB could repress PI3K/AKT/mTOR signaling pathway and autophagy to block the CXCL12 expression in CAFs, thereby weakening the CXCL12-mediated EC tumor progression. Our data provide a novel insight into the underlying mechanism of RB inhibiting EC, and emphasize the importance of tumor microenvironment (cytokines from CAFs) in modulating cancer malignant progression.

Metal-Organic Framework Composites and Their Derivatives as Efficient Electrodes for Energy Storage Applications: Recent Progress and Future Perspectives.

Metal-organic frameworks (MOFs) have been important electrochemical energy storage (EES) materials because of their rich species, large specific surface area, high porosity and rich active sites. Nevertheless, the poor conductivity, low mechanical and electrochemical stability of pristine MOFs have hindered their further applications. Although single component MOF derivatives have higher conductivity, self-aggregation often occurs during preparation. Composite design can overcome the shortcomings of MOFs and derivatives and create synergistic effects, resulting in improved electrochemical properties for EES. In this review, recent applications of MOF composites and derivatives as electrodes in different types of batteries and supercapacitors are critically discussed. The advantages, challenges, and future perspectives of MOF composites and derivatives have been given. This review may guide the development of high-performance MOF composites and derivatives in the field of EES.

Approaches to Enhancing Electrical Conductivity of Pristine Metal-Organic Frameworks for Supercapacitor Applications.

Metal-organic frameworks (MOFs), known as porous coordination polymers, have attracted intense interest as electrode materials for supercapacitors (SCs) owing to their advantageous features including high surface area, tunable porous structure, structural diversity, etc. However, the insulating nature of most MOFs has impeded their further electrochemical applications. A common solution for this issue is to transform pristine MOFs into more stable and conductive metal compounds/porous carbon materials through pyrolysis, which however losses the inherent merits of MOFs. To find a consummate solution, recently a surge of research devoted to improving the electrical conductivity of pristine MOFs for SCs has been carried out. In this review, the most related research work on pristine MOF-based materials is reviewed and three effective strategies (chemical structure design of conductive MOFs (c-MOFs), composite design, and binder-free structure design) which can significantly increase their conductivity and consequently the electrochemical performance in SCs are proposed. The conductivity enhancement mechanism in each approach is well analyzed. The representative research works on using pristine MOFs for SCs are also critically discussed. It is hoped that the new insights can provide guidance for developing high-performance electrode materials based on pristine MOFs with high conductivity for SCs in the future.

Synergetic Dielectric and Magnetic Losses of a Core-Shell Co/MnO/C Nanocomplex toward Highly Efficient Microwave Absorption.

High-performance microwave-absorbing materials (MAMs) derived from metal-organic frameworks (MOFs) have attracted considerable attention due to their tunable chemical composition and microstructure. In this contribution, a core-shell-structured Co/MnO/C nanocomplex was prepared using a CoMn-MIL MOF by a facile hydrothermal synthesis and subsequent pyrolysis process. The optimal microwave absorption (MA) property of the as-prepared Co/MnO/C nanocomplex was achieved by the regulation of the Co2+/Mn2+ molar ratio. The minimum reflection loss (RLmin) of the Co/MnO/C-31 nanocomplex was low to -55.0 dB at 16.2 GHz with a thickness of 1.49 mm, and the effective absorption bandwidth (EAB) was high to 5.95 GHz (12.05-18 GHz) at a thickness of 1.8 mm. The mixed-metal nanocomplex with the core-shell structure exhibited outstanding MA performance, corresponding to the synergetic effect of the magnetic and dielectric loss. It provides a high efficiency strategy for rendering low reflection loss and broad EAB to high-performance MAMs.

A (3,8)-Connected Metal-Organic Framework with Bending Dicarboxylate Linkers for C2H2/CO2 Separation.

Herein, by replacement of the linear terephthalate linker with the bending 2,5-thiophenedicarboxylate (tdc2-) linker in the typical (3,9)-connected metal-organic framework, with a reduced 8-connected hydroxyl-centered trinuclear cluster, a new (3,8)-connected network, [Ni3(µ3-OH)(tdc)3(tpp)] [DZU-1; tpp = 2,4,6-tris(4-pyridyl)pyridine], was synthesized. The modified pore environment enables DZU-1 to selectively adsorb C2H2 over CO2 in an efficient manner.

Drivers of Global Methane Emissions Embodied in International Beef Trade.

Increasing worldwide demand for beef products promotes international beef trade. Cattle raising and beef products as significant sources of methane (CH4) emissions have received widespread concerns. However, the factors driving CH4 emissions embodied in the global beef trade have not been quantified. Here, we evaluate international beef trade-induced CH4 emissions and assess the contribution of the five driving factors to changes in CH4 emissions embodied in the beef trade from 2000 to 2018. We show that driven by increasing population and meat demands, the global beef trade-induced CH4 emissions increased continuously in the past two decades, with total emissions of 9337.3 Gg in 2018. The drivers that could potentially reduce trade-related emissions are emission intensities in beef exporting countries and beef importing countries' selections of their beef suppliers. Together, these two driving factors reduced CH4 emissions by 923.5 Gg from 2012 to 2018. Results suggest that efforts should be made to reduce the emission intensity via improving cattle feed and feeding practices in beef exporting countries. Beef importing countries could also contribute to CH4 emission reduction by selecting those beef exporting countries with low emission intensities.

Tropospheric Ozone Perturbations Induced by Urban Land Expansion in China from 1980 to 2017.

Urbanization perturbs air pollutants from a dynamic and thermodynamic perspective, which has inspired extensive investigations in China due to rapid urban land expansion in the past four decades. However, knowledge gaps remain in the long-term and nationwide responses to air pollutants to urbanization. The evolution of tropospheric ozone associated with urban land expansion across China was assessed from 1980 to 2017 using a coupled WRF-Chem model based on a recently updated land use change (LUC) data set. The results revealed that urban-land expansion drove growing ozone trends for this period and contributed about 3-9% to its summer maximum concentrations during the 2010s in major urban agglomerations across China. The association between a long-term change in summer O3 concentrations and LUC after excluding the effect of precursor emissions and meteorological conditions and causes of interannual (short-term) variations in O3 concentrations induced by urban-land expansion were also explored by examining the relationships between ozone fluctuations and meteorological variables.

Pore Engineering for One-Step Ethylene Purification from a Three-Component Hydrocarbon Mixture.

Ethylene production from C2 hydrocarbon mixtures through one separation step is desirable but challenging because of the similar size and physical properties of acetylene, ethylene, and ethane. Herein, we report three new isostructural porous coordination networks (NPU-1, NPU-2, NPU-3; NPU represents Northwestern Polytechnical University) that are sustained by 9-connected nodes based upon a hexanuclear metal cluster of composition [Mn6(µ3-O)2(CH3COO)3]6+. NPU-1/2/3 exhibit a dual cage structure that was systematically fine-tuned in terms of cage size to realize selective adsorption of C2H2 and C2H6 over C2H4. Dynamic breakthrough experiments demonstrated that NPU-1 produces ethylene in >99.9% purity from a three-component gas mixture (1:1:1 C2H2/C2H4/C2H6). Molecular modeling studies revealed that the dual adsorption preference for C2H2 and C2H6 over C2H4 originates from (a) strong hydrogen-bonding interactions between electronegative carboxylate O atoms and C2H2 molecules in one cage and (b) multiple non-covalent interactions between the organic linkers of the host network and C2H6 molecules in the second cage.

Molecular Sieving of Acetylene from Ethylene in a Rigid Ultra-microporous Metal Organic Framework.

Rigid molecular sieving materials are the ideal candidates for gas separation (e. g., C2 H2 /C2 H4 ) due to their ultrahigh adsorption selectivity and the absence of gas co-adsorption. However, the absolute molecular sieving effect for C2 H2 /C2 H4 separation has rarely been realized because of their similar physicochemical properties. Herein, we demonstrate the absolute molecular sieving of C2 H2 from C2 H4 by a rigid ultra-microporous metal-organic framework (F-PYMO-Cu) with 1D regular channels (pore size of ca. 3.4 Å). F-PYMO-Cu exhibited moderate acetylene uptake (35.5 cm3 /cm3 ), but very low ethylene uptake (0.55 cm3 /cm3 ) at 298 K and 1 bar, yielding the second highest C2 H2 /C2 H4 uptake ratio of 63.6 up to now. One-step C2 H4 production from a binary mixture of C2 H2 /C2 H4 and a ternary mixture of C2 H2 /CO2 /C2 H4 at 298 K was achieved and verified by dynamic breakthrough experiments. Coupled with excellent thermal and water stability, F-PYMO-Cu could be a promising candidate for industrial C2 separation tasks.

Low-Concentration C2 H6 Capture Enabled by Size Matching in the Ultramicropore.

Low-concentration ethane capture is crucial for environmental protection and natural gas purification. The ideal physisorbent with strong C2 H6 interaction and large C2 H6 uptake at low-concentration level has rarely been reported, due to the large pKa value and small quadrupole moment of C2 H6 . Herein, we demonstrate the perfectly size matching between the ultramicropore (pore size of 4.6 Å) and ethane (kinetic diameter of 4.4 Å) in a nickel pyridine-4-carboxylate metal-organic framework (IISERP-MOF2), which enables the record-breaking performance for low concentration C2 H6 capture. IISERP-MOF2 exhibits the large C2 H6 adsorption enthalpy of 56.7 kJ/mol, and record-high C2 H6 uptake at low pressure of 0.01-0.1 bar and 298 K (1.8 mmol/g at 0.01 bar). Molecule simulations and C2 H6 -loading crystal structure analysis revealed that the maximized interaction sites in IISERP-MOF2 with ethane molecule originates the strong C2 H6 adsorption. The dynamic breakthrough experiments for gas mixtures of C2 H6 /N2 (1/999, v/v) and C2 H6 /CH4 (5/95, v/v) proved the excellent low-concentration C2 H6 capture performance.