In Situ Laser-Induced Breakdown Spectroscopy for Chromium Speciation Analysis Based on the Interactions of Oxygen-Containing Groups with Functionalized Co3O4-rGO: Evidence from Advanced Optical Techniques and Density Functional Theoretical Calculations under Electric Field.

Achieving accurate detection of different speciations of heavy metal ions (HMIs) in an aqueous solution is an urgent problem due to the different bioavailabilities and physiological toxicity. Herein, we nominated a novel strategy to detect HCrO4- and Cr(OH)2+ at a trace level via the electrochemical sensitive surface constructed by Co3O4-rGO modified with amino and carboxyl groups, which revealed that the interactions between distinct functional groups and different oxygen-containing groups of target ions are conducive to the susceptible and anti-interference detection. The detection sensitivities of 19.46 counts µg-1 L for HCrO4- and 13.44 counts µg-1 L for Cr(OH)2+ were obtained under optimal conditions, while the limits of detection were 0.10 and 0.12 µg L-1, respectively. Satisfactory anti-interference and actual water sample analysis results were obtained. A series of advanced optical techniques like X-ray photoelectron spectroscopy, X-ray absorption near-edge structure technology, and density functional theory calculations under an electric field demonstrated that chemical interactions between groups contribute more to the fixation of target ions than electrical attraction alone. The presence of oxygen-containing groups distinct from simple ionic forms was a critical factor in the selectivity and anti-interference detection. Furthermore, the valence cycle of Co(II)/(III) synergistically boosted the detection performance. This research provides a promising tactic from the microscopic perspective of groups' interactions to accomplish the precise speciation analysis of HMIs in the water environment.

Highly Accurate Determination of the Total Amount of Pb2+ and Pb(OH)+ in a Natural Water Environment Revealed by Dynamic Simulation and DFT Calculation: Benefit from the Electron Inverse Effect of Pt Nanoclusters over Defective g-C3N4.

Although utilizing nanomaterial-modified electrodes for lead ion detection has achieved great success, most of them are carried out under acidic conditions and ignore the variation of Pb(II) speciation at different pH conditions, leading to the potential inaccuracy of Pb(II) detection in a neutral natural water environment. Thus, designing a novel catalyst with high accuracy for the detection of various forms of the total amount of Pb(II) (Pb2+ and Pb(OH)+) in neutral waters is significant. Herein, Pt nanoclusters (Pt NCs) were elaborately constructed and stabilized on the Co single-atom-doped g-C3N4 with abundant N vacancies (Pt NCs/VN-C3N4), which achieved the ultrasensitive detection (102.16 µM µA-1) of Pb(II) in neutral conditions. The dynamic simulation and theoretical calculations reveal that the parallel deposition of Pb2+ and Pb(OH)+ occurs on the electrode surface modified by Pt NCs/VN-C3N4, and the current peaks of Pb(II) are cocontributed by Pb2+ and Pb(OH)+ species. An "electron inverse" phenomenon in Pt NCs/VN-C3N4 from the VN-C3N4 substrate to Pt NCs endows Pt NCs in an electron-rich state, serving as active centers to promote rapid and efficient reduction for both Pb2+ and Pb(OH)+, facilitating the accurate detection of the total amount of Pb(II) in all forms in the actual water environment.

Generalizable Descriptors of Highly Sensitive Detection of As(III) over Transition-Metal Single Atoms: A Combined Density Function Theory and Gradient Boosting Regression Approach.

Traditional nanomodified electrodes have made great achievements in electrochemical stripping voltammetry of sensing materials for As(III) detection. Moreover, the intermediate states are complicated to probe because of the ultrashort lifetime and complex reaction conditions of the electron transfer process in electroanalysis, which seriously hinder the identification of the actual active site. Herein, the intrinsic interaction of highly sensitive analytical behavior of nanomaterials is elucidated from the perspective of electronic structure through density functional theory (DFT) and gradient boosting regression (GBR). It is revealed that the atomic radius, d-band center (εd), and the largest coordinative TM-N bond length play a crucial role in regulating the arsenic reduction reaction (ARR) performance by the established ARR process for 27 sets of transition-metal single atoms supported on N-doped graphene. Furthermore, the database composed of filtered intrinsic electronic structural properties and the calculated descriptors of the central metal atom in TM-N4-Gra were also successfully extended to oxygen evolution reaction (OER) systems, which effectively verified the reliability of the whole approach. Generally, a multistep workflow is developed through GBR models combined with DFT for valid screening of sensing materials, which will effectively upgrade the traditional trial-and-error mode for electrochemical interface designing.

Engineering Electron-Rich Sites on CoSe2-x Nanosheets for the Enhanced Electroanalysis of As(III): A Study on the Electronic Structure via X-ray Absorption Fine Structure Spectroscopy and Density Functional Theory Calculation.

Vacancy and doping engineering are promising pathways to improve the electrocatalytic ability of nanomaterials for detecting heavy metal ions. However, the effects of the electronic structure and the local coordination on the catalytic performance are still ambiguous. Herein, cubic selenium vacancy-rich CoSe2 (c-CoSe2-x) and P-doped orthorhombic CoSe2-x (o-CoSe2-x|P) were designed via vacancy and doping engineering. An o-CoSe2-x|P-modified glass carbon electrode (o-CoSe2-x|P/GCE) acquired a high sensitivity of 1.11 µA ppb-1 toward As(III), which is about 40 times higher than that of c-CoSe2-x, outperforming most of the reported nanomaterial-modified glass carbon electrodes. Besides, o-CoSe2-x|P/GCE displayed good selectivity toward As(III) compared with other divalent heavy metal cations, which also exhibited excellent stability, repeatability, and practicality. X-ray absorption fine structure spectroscopy and density functional theory calculation demonstrate that electrons transferred from Co and Se to P sites through Co-P and Se-P bonds in o-CoSe2-x|P. P sites obtained plentiful electrons to form active centers, which also had a strong orbital coupling with As(III). In the detection process, As(III) was bonded with P and reduced by the electron-rich sites in o-CoSe2-x|P, thus acquiring a reinforced electrochemical sensitivity. This work provides an in-depth understanding of the influence of the intrinsic physicochemical properties of sensitive materials on the behavior of electroanalysis, thus offering a direct guideline for creating active sites on sensing interfaces.

General Strategies to Construct Highly Efficient Sensing Interfaces for Metal Ions Detection from the Perspective of Catalysis.

Constructing high-effective electrode sensing interfaces has been considered an effective method for electrochemical detection toward heavy metal ions (HMIs). However, most research has been devoted to enhancing the stripping currents of HMIs by simply improving the adsorptive capacity and conductivity of the electrode modified materials, while lacking theoretical guidelines in fabricating catalytic sensing interfaces. Besides, the understanding of detection mechanisms is quite unscientific from the perspective of catalysis. This perspective summarizes five general strategies in designing highly efficient sensing interfaces in the recent five years, including modulating crystal phases, orientations and planes, defect engineering, ionic valence state cycle engineering, adsorption in situ catalysis strategy, and construction of atomic level catalytic active sites. What's more, the catalytic mechanisms for improving the signals of HMIs, such as boosting the electron transfer rates and conversion rates, lowering the energy barriers, etc., are introduced and emphasized. This study has a great significance in directionally controlling functionalized electrochemical sensors to achieve excellent sensitivity and selectivity in detecting environmental pollutants from the view of catalysis, and it also brings enlightenments and guidance to develop new electroanalytical methods.

Sensing Material-Dependent Interference of Multiple Heavy Metal Ions: Experimental and Simulated Thermodynamics Study on Cu(II), Cd(II), and As(III) Electroanalysis.

Interference among multiple heavy metal ions (HMIs) is a significant problem that must be solved in electroanalysis, which extremely restricts the practical popularization of electrochemical sensors. However, due to the limited exploration of the intrinsic mechanism, it is still difficult to confirm the influencing factors. In this work, a series of experimental and theoretical electroanalysis models have been established to investigate the electroanalysis results of Cu(II), Cd(II), As(III), and their mixtures, which were based on the simple structure and stable coordination of nickel single-atom catalysts. X-ray absorption spectroscopy and density functional theory calculations were used to reveal the underlying detection mechanism of the 50-fold boosting effect of Cu(II) on As(III) while Cd(II) inhibits As(III). Combining the application of the thermodynamic model and Fourier transform infrared reflection, the specific interaction of the nanomaterials and HMIs on the interface is considered to be the fundamental source of the interference. This work opens up a new way of thinking about utilizing the unique modes of interplay between nanomaterials and HMIs to achieve anti-interference intelligent electrodes in stripping analysis.

Highly Sensitive and Stable Determination of As(III) under Near-Neutral Conditions: Benefit from the Synergetic Catalysis of Pt Single Atoms and Active S Atoms over Pt1/MoS2.

Designing new catalysts with high activity and stability is crucial for the effective analysis of environmental pollutants under mild conditions. Here, we developed a superior catalyst of Pt single atoms anchored on MoS2 (Pt1/MoS2) to catalyze the determination of As(III). A detection sensitivity of 3.31 µA ppb-1 was obtained in acetate buffer solution at pH 6.0, which is the highest compared with those obtained by other Pt-based nanomaterials currently reported. Pt1/MoS2 exhibited excellent electrochemical stability during the detection process of As(III), even in the coexistence of Cu(II), Pb(II), and Hg(II). X-ray absorption fine structure spectroscopy and theoretical calculations revealed that Pt single atoms were stably fixed by four S atoms and activated the adjacent S atoms. Then, Pt and S atoms synergistically interacted with O and As atoms, respectively, and transferred some electrons to H3AsO3, which change the rate-determining step of H3AsO3 reduction and reduce reaction energy barriers, thereby promoting rapid and efficient accumulation for As(0). Compared with Pt nanoparticles, the weaker interaction between arsenic species and Pt1/MoS2 enabled the effortless regeneration and cyclic utilization of active centers, which is more favorable for the oxidation of As(0). This work provides inspiration for developing highly efficient sensing platforms from the perspective of atomic-level catalysis and affords references to explore the detection mechanism of such contaminants.

Au25 Nanoclusters Exhibit Superhigh Catalytic Activity in Electrochemical Detection of As(III).

An atomic-level Au nanocluster, as an excellent photocatalyst, is generally not considered as an efficient electrocatalyst due to its poor stability. Herein, a method is proposed to stabilize abundant Au25 on Fe2O3 nanoplates (Au25/OV-Fe2O3) successfully with oxygen vacancies (OV) created. Au25/OV-Fe2O3 shows superhigh catalysis in the electrochemical reduction toward As(III). The record-breaking sensitivity (161.42 µA ppb-1) is two orders of magnitude higher than currently reported, where an ultratrace limit of detection (9 ppt) is obtained, suggesting promising applications in the analysis of organic and bioactive substances. The stability of Au25 is attributed to the Au-Fe bond formed after loading Au25 nanoclusters on Fe2O3 nanoplates through "electron compensation" and bond length (Au-S) shortening. Moreover, the ligand S atoms in Au25 nanoclusters significantly contribute to the reduction of As(III). The fantastic stability and superior catalytic ability of Au25/OV-Fe2O3 provide guidelines to stabilize Au nanoclusters on metal oxides, indicating their potential electroanalytical applications.

Electrons in Oxygen Vacancies and Oxygen Atoms Activated by Ce3+/Ce4+ Promote High-Sensitive Electrochemical Detection of Pb(II) over Ce-Doped α-MoO3 Catalysts.

Modulating the active sites of oxygen vacancies (OVs) to enhance the catalytic properties of nanomaterials has attracted much research interest in various fields, but its intrinsic catalytic mechanism is always neglected. Herein, we establish an efficient strategy to promote the electrochemical detection of Pb(II) by regulating the concentration of OVs in α-MoO3 nanorods via doping Ce3+/Ce4+ ions. α-MoO3 with the Ce-doped content of 9% (C9M) exhibited the highest detection sensitivity of 106.64 µM µA-1 for Pb(II), which is higher than that achieved by other metal oxides and most precious metal nanomaterials. It is found that C9M possessed the highest concentration of OVs, which trapped some electrons for strong affinity interaction with Pb(II) and provided numerous atomic level interfaces of high surface free energy for catalysis reactions. X-ray absorption fine structure spectra and density functional theory calculation indicate that Pb(II) was bonded with the surface-activated oxygen atoms (Os) around Ce ions and obtained some electrons from Os. Besides, the longer Pb-O bonds on C9M were easier to break, causing a low desorption energy barrier to effectively accelerate Pb(II) desorbing to the electrode surface. This study helps to understand the changes in electronic structure and catalytic performance with heteroatom doping and OVs in chemically inert oxides and provide a reference for designing high-active electrocatalytic interfaces to realize ultrasensitive analysis of environmental contaminants.

Nanometal Oxides with Special Surface Physicochemical Properties to Promote Electrochemical Detection of Heavy Metal Ions.

Heavy metal ions (HMIs) are one of the major environmental pollution problems currently faced. To monitor and control HMIs, rapid and reliable detection is required. Electrochemical analysis is one of the promising methods for on-site detection and monitoring due to high sensitivity, short response time, etc. Recently, nanometal oxides with special surface physicochemical properties have been widely used as electrode modifiers to enhance sensitivity and selectivity for HMIs detection. In this work, recent advances in the electrochemical detection of HMIs using nanometal oxides, which are attributed to specific crystal facets and phases, surficial defects and vacancies, and oxidation state cycle, are comprehensively summarized and discussed in aspects of synthesis, characterization, electroanalysis application, and mechanism. Moreover, the challenges and opportunities for the development and application of nanometal oxides with functional surface physicochemical properties in electrochemical determination of HMIs are presented.

Identifying Phase-Dependent Electrochemical Stripping Performance of FeOOH Nanorod: Evidence from Kinetic Simulation and Analyte-Material Interactions.

Metal hydroxide nanomaterials are widely applied in the energy and environment fields. The electrochemical performance of such materials is strongly dependent on their crystal phases. However, as there are always multiple factors relating to the phase-dependent electrochemistry, it is still difficult to identify the determining one. The well-defined crystal phases of α- and ß-FeOOH nanorods are characterized through the transmission electron microscopy by a series of rotation toward one rod, where the cross-section shape and the growth direction along the [001] crystalline are first verified for 1D FeOOH nanostructures. The electrosensitivity of the two materials toward Pb(II) is tested, where α-FeOOH performs an outstanding sensitivity whilst it is only modest for ß-FeOOH. Experiments via Fourier transform infrared spectroscopy, X-ray absorption fine structure (XAFS), etc., show that α-FeOOH presents a larger Pb(II) adsorption capacity due to more surficial hydroxyl groups and weaker PbO bond strength. The reaction kinetics are simulated and the adsorption capacity is found to be the determining factor for the distinct Pb(II) sensitivities. Combining experiment with simulation, this work reveals the physical insights of the phase-dependent electrochemistry for FeOOH and provides guidelines for the functional application of metal hydroxide nanomaterials.

Changing the Blood Test: Accurate Determination of Mercury(II) in One Microliter of Blood Using Oriented ZnO Nanobelt Array Film Solution-Gated Transistor Chips.

The measurement of ultralow concentrations of heavy metal ions (HMIs) in blood is challenging. A new strategy for the determination of mercury ions (Hg2+ ) based on an oriented ZnO nanobelt (ZnO-NB) film solution-gated field-effect transistor (FET) chip is adopted. The FET chips are fabricated with ZnO-NB film channels with different orientations utilizing the Langmuir-Blodgett (L-B) assembly technique. The combined simulation and I-V behavior results show that the nanodevice with ZnO-NBs parallel to the channel has exceptional performance. The sensing capability of the oriented ZnO-NB film FET chips corresponds to an ultralow minimum detectable level (MDL) of 100 × 10-12 m in deionized water due to the change in the electrical double layer (EDL) arising from the synergism of the field-induced effect and the specific binding of Hg2+ to the thiol groups (-SH) on the film surface. Moreover, the prepared FET chips present excellent selectivity toward Hg2+ , excellent repeatability, and a rapid response time (less than 1 s) for various Hg2+ concentrations. The sensing performance corresponds to a low MDL of 10 × 10-9 m in real samples of a drop of blood.

Transforming crystal structures of cobalt molybdate to generate electron-rich sites for electrochemical detection of Pb(II).

BACKGROUND: Most of the investigations on distinct crystal structures of catalysts are individually focused on the difference of surface functional groups or adsorption properties, but rarely explore the changes of active sites to affect the electrocatalytic performance. Catalysts with diverse crystal structures had been applied to modified electrodes in different electrocatalytic reactions. However, there is currently a lack of an essential understanding for the role of real active sites in catalysts with crystalline structures in electroanalysis, which is crucial for designing highly sensitive sensing interfaces. RESULTS: Herein, cobalt molybdate with divergent crystal structures (α-CoMoO4 and ß-CoMoO4) were synthesized by adjusting the calcination temperature, indicating that α-CoMoO4 (800 °C) (60.00 µA µM-1) had the highest catalytic ability than ß-CoMoO4 (700 °C) (38.68 µA µM-1) and α-CoMoO4 (900 °C) (29.55 µA µM-1) for the catalysis of Pb(II). It was proved that the proportion of Co(II) and Mo(IV) as electron-rich sites in α-CoMoO4 (800 °C) were higher than ß-CoMoO4 (700 °C) and α-CoMoO4 (900 °C), possessing more electrons to participate in the valence cycles of Co(II)/Co(III) and Mo(IV)/Mo(VI) to boost the catalytic reduction of Pb(II). Specifically, Co(II) transferred a part of electrons to Mo(VI), promoting the formation of Mo(IV). Co(II) and Mo(IV), as the electron-rich sites, providing electrons to Pb(II), further accelerating the conversion of Pb(II) into Pb(0). SIGNIFICANCE: In the process of detecting Pb(II), the CoMoO4 structures under different temperatures have distinct content of electron-rich sites Co(II) and Mo(IV). α-CoMoO4 (800 °C), with the highest content are benefited to detect Pb(II). This work is conducive to understanding the effect of the changes of active sites resulting from crystal transformation on the electrocatalytic performance, and provides a way to construct sensitive electrochemical interfaces of distinct active sites.

Fully Integrated Multiplexed Wristwatch for Real-Time Monitoring of Electrolyte Ions in Sweat.

Considerable progress has already been made in sweat sensors based on electrochemical methods to realize real-time monitoring of biomarkers. However, realizing long-term monitoring of multiple targets at the atomic level remains extremely challenging, in terms of designing stable solid contact (SC) interfaces and fully integrating multiple modules for large-scale applications of sweat sensors. Herein, a fully integrated wristwatch was designed using mass-manufactured sensor arrays based on hierarchical multilayer-pore cross-linked N-doped porous carbon coated by reduced graphene oxide (NPCs@rGO-950) microspheres with high hydrophobicity as core SC, and highly selective monitoring simultaneously for K+, Na+, and Ca2+ ions in human sweat was achieved, exhibiting near-Nernst responses almost without forming an interfacial water layer. Combined with computed tomography, solid-solid interface potential diffusion simulation results reveal extremely low interface diffusion potential and high interface capacitance (598 µF), ensuring the excellent potential stability, reversibility, repeatability, and selectivity of sensor arrays. The developed highly integrated-multiplexed wristwatch with multiple modules, including SC, sensor array, microfluidic chip, signal transduction, signal processing, and data visualization, achieved reliable real-time monitoring for K+, Na+, and Ca2+ ion concentrations in sweat. Ingenious material design, scalable sensor fabrication, and electrical integration of multimodule wearables lay the foundation for developing reliable sweat-sensing systems for health monitoring.

Phosphorus-doped synergy of phase change in heterogeneous catalysts of NiS-NiS2 for efficient electrocatalysis of Pb(II).

A fundamental understanding of the electroanalytical activity of transition metal sulfide electrocatalysts, especially the origin of the electrocatalytic reactivity on the surface sites of heterostructures with multiple crystalline phases, is essential for the design of low-cost and highly efficient nonprecious metal electrocatalysts for further scientific and technological achievements. Herein, we injected P into NiS and occupied the S sites through a doping strategy. The redistributed electronic structure induced the construction of heterostructures, which significantly improved the structure and chemical state of electrochemically inert NiS. The phase-change mechanism between NiS and NiS2 synergistically catalyzes Pb(II), while the P and S sites jointly lose electrons. Moreover, the constructed heterojunction sensor shows the a sensitivity of 83.43 µA µM-1 to Pb(II) with a theoretical limit of detection of 48 nM, as well as excellent stability, reproducibility, and anti-interference ability. The accurate detection in real water further reveals the potential of this sensor for practical applications. This study provides a guiding strategy for improving electrochemically inert materials to design highly active electrocatalytic interfaces, which has important implications for the development of highly efficient electrode-sensitive materials similar to precious metals to achieve accurate electrical analysis.

In-situ precipitation zero-valent Co on Co2VO4 to activate oxygen vacancies and enhance bimetallic ions redox for efficient detection toward Hg(II).

Despite the widespread utilization of variable valence metals in electrochemistry, it is still a formidable challenge to enhance the valence conversion efficiency to achieve excellent catalytic activity without introducing heterophase elements. Herein, the in-situ precipitation of Co particles on Co2VO4 not only enhanced the concentration of oxygen vacancies (Ov) but also generated a greater number of low-valence metals, thereby enabling efficient reduction towards Hg(II). The electroanalysis results demonstrate that the sensitivity of Co/Co2VO4 towards Hg(II) was measured at an impressive value of 1987.74 µA µM-1 cm-2, significantly surpassing previously reported results. Further research reveals that Ov acted as the main adsorption site to capture Hg(II). The redox reactions of Co2+/Co3+ and V3+/V4+ played a synergistic role in the reduction of Hg(II), accompanied by the continuous supply of electrons from zero-valent Co to expedite the valence cycle. The Co/Co2VO4/GCE presented remarkable selectivity towards Hg(II), with excellent stability, reproducibility, and anti-interference capability. The electrode also exhibited minimal sensitivity fluctuations towards Hg(II) in real water samples, underscoring its practicality for environmental applications. This study elucidates the mechanism underlying the surface redox reaction of metal oxides facilitated by zero-valent metals, providing us with new strategies for further design of efficient and practical sensors.

Multi-dimensional signals coupling of simultaneous acquisition stripping current with laser-induced breakdown spectroscopy for accurate analysis of Cd(II) in coexisting Cu(II).

BACKGROUND: Despite significant advancements in detecting Cd(II) using nanomaterials-modified sensitive interfaces, most detection methods rely solely on a single electrochemical stripping current to indicate concentration. This approach often overlooks potential inaccuracies caused by interference from coexisting ions. Therefore, establishing multi-dimensional signals that accurately reflect Cd(II) concentration in solution is crucial. RESULTS: In this study, we developed a system integrating concentration, electrochemical stripping current, and laser-induced breakdown spectroscopy (LIBS) characteristic peak intensity through in-situ laser-induced breakdown spectroscopy and electrochemical integrated devices. By simultaneously acquiring multi-dimensional signals to dynamically track the electrochemical deposition and stripping processes, we observed that replacement reactions occur between Cu(II) and Cd(II) on the surface of Ru-doped MoS2 modified carbon paper electrodes (Ru-MoS2/CP). These reactions facilitate the oxidation of Cd(0) to Cd(II) during the stripping process, significantly increasing the currents of Cd(II). Remarkably, the ingenious design of the Ru-MoS2 sensitive interface allowed for the undisturbed deposition of Cu(II) and Cd(II) during the electrochemical deposition process. Consequently, our in-situ integrated device achieved accurate detection of Cd(II) in complex environments, boasting a detection sensitivity of 8606.5 counts µM⁻1. SIGNIFICANCE: By coupling multi-dimensional signals from stripping current and LIBS spectra, we revealed the interference process between Cu(II) and Cd(II), providing valuable insights for accurate electrochemical analysis of heavy metal ions in complex water environments.

[AFLP analysis of three species from Akebia genus].

OBJECTIVE: To establish the DNA fingerprints of three species from Akebia genus markers and find the feasibility in analyzing their genetic diversity, relationship and germplasm identification by Amplified Fragment Length Polymorphsm (AFLP). METHODS: The DNA polymorphism of 12 samples from three species of Akebia genus were detected by AFLP molecular markers. RESULTS: Among 64 primer pairs,8 were found to yield rich band patterns and high polymorphism. After amplification with these 8 primer pairs to 12 samples, a total of 977 polymorphic DNA bands were detected. The polymorphism rate reached 92.61%. The coefficient of genetic similarity and UPGMA clustering analysis were consistent with the classification based on morphological observations. The coefficient of genetic similarity was 0.49 and the 12 samples could be clustered into 2 groups. Akebia quinata samples formed a single cluster and Akebia trifoliata var. australis and Akebia trifoliata samples formed another cluster. CONCLUSION: AFLP markers can be potentially used in analyzing of genetic diversity, relationship and germplasm identification of these medicinal plants.

Coordination engineering strategy of iron single-atom catalysts boosts anti-Cu(II) interference detection of As(III) with a high sensitivity.

Mutual interference issues between heavy metal ions tremendously affect the detection reliability and accuracy in water quality analysis, especially the serious interference of Cu(II) on the detection of As(III) is greatly hard to overcome, which needs to be solved urgently. Herein, iron single-atom catalysts with different coordination structures of FeN2C2 and FeN3P are constructed to selectively catalyze the detection of As(III) in the coexistence of Cu(II). FeN3P achieves a high sensitivity of 3.90 µA ppb-1 toward As(III) in NH4Cl/NH3·H2O electrolyte (pH 8.0), completely avoiding Cu(II)-interference. Moreover, the turnover frequency (TOF) of FeN3P is an order of magnitude higher than that of FeN2C2. X-ray absorption fine structure (XAFS) spectroscopy and density functional theory (DFT) calculations demonstrate that an As-O bond of H3AsO3 is broken by the strong affinities between both P and O atoms and Fe and As atoms, and H3AsO3 are preferentially reduced by FeN3P during adsorptive process. Meanwhile, the low reaction energy barrier of the rate-determined step for As(III) reduction over FeN3P also accelerates the deposition of As(III) and enhances its response signals. The free-Cu(II) are difficult to adsorb on FeN3P and do not compete with As(III) for Fe active sites, which contributes to the excellent anti-Cu(II) interference capability.

Bimodal interferences of Pb(II) induced by parallel deposition in Pb(II)-Cu(II) electrochemical detections: Voltammetric signals analysis combined with numerical simulations on transient interfacial phenomena.

The perplexity of double peaks in Pb(II) detections has been a threat to the reliability of Pb(II) electroanalysis results for a long term. For the complexity of electrode interfaces, rare studies were taken on mechanisms of Pb(II) double peaks through interfacial kinetics. In this work, analyses on experimental signals and interfacial simulations were working together to reveal that the generation of Pb(II) double peaks in Pb(II)-Cu(II) systems is the deposition of Pb(II) on Cu deposits occurring in parallel. By applying anode stripping voltammetry and cyclic voltammetry, a parallel deposition reaction was found to influence the shape of Pb(II) peaks, and the existence of the second peak was controlled through the adjustment of experimental conditions. A kinetic model was built to reveal the interference of electroanalysis signals caused by a parallel deposition reaction and simulations based on the model were combined with experiments to illustrate that double peaks of Pb(II) were caused by the parallel deposition on Cu(II) deposits. This work proposes another insight of Pb(II) double peaks from macroscale kinetics and pays more attention on the dynamic procedure of electroanalysis interfaces, which makes the study on environmental electroanalysis interface phenomena more clear and is enlightening to develop efficient electrical methods for pollutant monitoring.