Insights into the Photochemical Mechanism of Goethite: Roles of Different Types of Surface Hydroxyl Groups in Reactive Oxygen Species Generation and Fe(III) Reduction.

The surface photochemical activity of goethite, which occurs widely in surface soils and sediments, plays a crucial role in the environmental transformation of various pollutants and natural organic matter. This study systemically investigated the mechanism of different types of surface hydroxyl groups on goethite in generating reactive oxygen species (ROSs) and Fe(III) reduction under sunlight irradiation. Surface hydroxyl groups were found to induce photoreductive dissolution of Fe(III) at the goethite-water interface to produce Fe2+(aq), while promoting the production of ROSs. Substitution of the surface hydroxyl groups on goethite by fluoride significantly inhibited the photochemical activity of goethite, demonstrating their important role in photochemical activation of goethite. The results showed that the surface hydroxyl groups (especially the terminating hydroxyl groups, ≡FeOH) led to the formation of Fe(III)-hydroxyl complexes via ligand-metal charge transfer on the goethite surface upon photoexcitation, facilitating the production of Fe2+(aq) and •OH. The bridging hydroxyl groups (≡Fe2OH) were shown to mainly catalyze the production of H2O2, leading to the subsequent light-driven Fenton reaction to produce •OH. These findings provide important insights into the activation of molecular oxygen on the goethite surface driven by sunlight in the environment, and the corresponding degradation of anthropogenic and natural organic compounds caused by the generated ROSs.

Solar Photodegradation of a Novel des-F(6)-Fluoroquinolone, Garenoxacin, and Ecotoxicity of Its Phototransformation Products.

Garenoxacin (GRNX) is a novel des-F(6)-fluoroquinolone on the horizon; thus, its fate and risk in the aquatic environment deserve attention. This study systematically investigated, for the first time, the phototransformation of GRNX under simulated and natural sunlight and assessed the ecotoxicity of its photodegradation products. Phototransformation of GRNX was observed to depend strongly on its ionization state, with direct photolysis and self-sensitized photolysis having comparable contributions for the cationic and zwitterionic species, while the latter dominated for the anionic species. Singlet oxygen generated via the self-sensitized photolysis of GRNX was the major reactive oxygen species in its photodegradation. Phototransformation of GRNX in different ionization states followed distinct pathways, with defluorination of the difluoromethyl group occurring only for the zwitterionic and anionic species. GRNX photodegradation in natural water could be described by a simple kinetic model based on the measured steady-state concentrations of 1O2 and ·OH. Toxicity tests with Vibrio fischeri and Chlorella vulgaris consistently indicate that the generation of hydroxylation and decarboxylation products during photodegradation of GRNX increased the acute toxicity. These findings not only provide insights into the fate of GRNX in sunlit surface water but also reveal the potentially significant risk of its photodegradation products to the aquatic ecosystem.

Drinking Water in Rural China: Water Sources, Treatment, and Boiling Energy.

Access to safe drinking water is a major public concern in China. A national survey of 57 029 households was conducted to fill major knowledge gaps on drinking water sources, end-of-use treatment methods, and energy used to boil water. Herein, we show that surface water and well water were frequently used by >147 million rural residents living in low-income inland and mountainous areas. Driven by socioeconomic development and government intervention, the level of access to tap water in rural China increased to 70% by 2017. Nevertheless, the rate was considerably lower than that in cities and unevenly distributed across the country. Approximately 90% of drinking water was boiled, an increase from 85% a decade ago. The contribution of electricity, mainly electric kettles, to the boiling of water was 69%. Similar to cooking, living conditions and heating requirements are the main influencing indicators of energy used to boil water. In addition to socioeconomic development, government intervention is a key factor driving the transition to safe water sources, universal access to tap water, and clean energy. Further improvement in drinking water safety in poor and remote rural areas remains challenging, and more intervention and more investment are needed.

Interpreting Highly Variable Indoor PM2.5 in Rural North China Using Machine Learning.

Household air pollution associated with solid fuel use is a long-standing public concern. The global population mainly using solid fuels for cooking remains large. Besides cooking, large amounts of coal and biomass fuels are burned for space heating during cold seasons in many regions. In this study, a wintertime multiple-region field campaign was carried out in north China to evaluate indoor PM2.5 variations. With hourly resolved data from ∼1600 households, key influencing factors of indoor PM2.5 were identified from a machine learning approach, and a random forest regression (RFR) model was further developed to quantitatively assess the impacts of household energy transition on indoor PM2.5. The indoor PM2.5 concentration averaged at 120 µg/m3 but ranged from 16 to ∼400 µg/m3. Indoor PM2.5 was ∼60% lower in families using clean heating approaches compared to those burning traditional coal or biomass fuels. The RFR model had a good performance (R2 = 0.85), and the interpretation was consistent with the field observation. A transition to clean coals or biomass pellets can reduce indoor PM2.5 by 20%, and further switching to clean modern energies would reduce it an additional 30%, suggesting many significant benefits in promoting clean transitions in household heating activities.

Identification of Factors Determining Household PM2.5 Variations at Regional Scale and Their Implications for Pollution Mitigation.

Indoor PM2.5, particulate matter no more than 2.5 µm in aerodynamic equivalent diameter, has very high spatiotemporal variabilities; and exploring the key factors influencing the variabilities is critical for purifying air and protecting human health. Here, we conducted a longer-term field monitoring campaign using low-cost sensors and evaluated inter- and intra-household PM2.5 variations in rural areas where energy or stove stacking is common. Household PM2.5 varied largely across different homes but also within households. Using generalized linear models and dominance analysis, we estimated that outdoor PM2.5 explained 19% of the intrahousehold variation in indoor daily PM2.5, whereas factors like the outdoor temperature and indoor-outdoor temperature difference that was associated with energy use directly or indirectly, explained 26% of the temporal variation. Inter-household variation was lower than intrahousehold variation. The inter-household variation was strongly associated with distinct internal sources, with energy-use-associated factors explaining 35% of the variation. The statistical source apportionment model estimated that solid fuel burning for heating contributed an average of 31%-55% of PM2.5 annually, whereas the contribution of sources originating from the outdoors was ≤10%. By replacing raw biomass or coal with biomass pellets in gasifier burners for heating, indoor PM2.5 could be significantly reduced and indoor temperature substantially increased, providing thermal comforts in addition to improved air quality.

Significant but Inequitable Cost-Effective Benefits of a Clean Heating Campaign in Northern China.

Residential emissions significantly contribute to air pollution. To address this issue, a clean heating campaign was implemented to replace coal with electricity or natural gas among 13.9 million rural households in northern China. Despite great success, the cost-benefits and environmental equity of this campaign have never been fully investigated. Here, we modeled the environmental and health benefits, as well as the total costs of the campaign, and analyzed the inequality and inequity. We found that even though the campaign decreased only 1.1% of the total energy consumption, PM2.5 emissions and PM2.5 exposure experienced 20% and 36% reduction, respectively, revealing the amplification effects along the causal pathway. Furthermore, the number of premature deaths attributable to residential emissions reduced by 32%, suggesting that the campaign was highly beneficial. Governments and residents shared the cost of 2,520 RMB/household. However, the benefits and the costs were unevenly distributed, as the residents in mountainous areas were not only less benefited from the campaign but also paid more because of the higher costs, resulting in a notably lower cost-effectiveness. Moreover, villages in less developed areas tended to choose natural gas with a lower initial investment but a higher total cost (2,720 RMB/household) over electricity (2,190 RMB/household). With targeted investment and subsidies in less developed areas and the promotion of electricity and other less expensive alternatives, the multidevelopment goals of improved air quality, reduced health impacts, and reduced inequity in future clean heating interventions could be achieved.

Application of Photocatalysis and Sonocatalysis for Treatment of Organic Dye Wastewater and the Synergistic Effect of Ultrasound and Light.

Organic dyes play vital roles in the textile industry, while the discharge of organic dye wastewater in the production and utilization of dyes has caused significant damage to the aquatic ecosystem. This review aims to summarize the mechanisms of photocatalysis, sonocatalysis, and sonophotocatalysis in the treatment of organic dye wastewater and the recent advances in catalyst development, with a focus on the synergistic effect of ultrasound and light in the catalytic degradation of organic dyes. The performance of TiO2-based catalysts for organic dye degradation in photocatalytic, sonocatalytic, and sonophotocatalytic systems is compared. With significant synergistic effect of ultrasound and light, sonophotocatalysis generally performs much better than sonocatalysis or photocatalysis alone in pollutant degradation, yet it has a much higher energy requirement. Future research directions are proposed to expand the fundamental knowledge on the sonophotocatalysis process and to enhance its practical application in degrading organic dyes in wastewater.

Environmental fate and ecological impact of the potentially toxic elements from the geothermal springs.

Potentially toxic elements from geothermal springs can cause significant pollution of the surrounding environment and pose potential risk to the ecosystem. The fate of potentially toxic elements in the water-soil-plant system in the Yangbajain geothermal field on the Tibetan Plateau, China was investigated to assess their impact on the eco-environment. The concentrations of Be, F, As, and Tl were highly elevated in the headwaters of the Yangbajain geothermal springs, and their concentrations in the local surface water impacted by the geothermal springs reached 8.1 µg/L (Be), 23.9 mg/L (F), 3.83 mg/L (As), and 8.4 µg/L (Tl), respectively, far exceeding the corresponding thresholds for surface and drinking water. The absence of As-Fe co-precipitation, undersaturated F-, and weak adsorption on minerals at high geothermal spring pH may be responsible for the As- and F-rich drainage, which caused pollution of local river. As concentrations in the leaves of Orinus thoroldii (Stapf ex Hemsl.) Bor were up to 42.7 µg/g (dry weight basis), which is an order of magnitude higher than the allowable limit in animal feeds. The locally farmed yaks are exposed to the excessive amount of F and As with high exposure risk through water-drinking and grass-feeding.

Household energy stacking and structures in Pakistan - Results from a multiple-energy study in Azad Kashmir and Punjab.

Solid fuel use (SFU) is common in most developing countries and would release many hazardous air pollutants posing high risks on human health. The Global Burden of Disease (GBD) study highlighted risks associated with household SFU in Pakistan, however, high uncertainties prevail because of scanty data on SFU and unaccounted energy stacking. This study conducted a field campaign aiming at collecting first-hand data on household energy mix in Pakistan. The first survey was in Punjab and Azad Kashmir, and revealed that stacked energy use was pervasive, especially for cooking. The stacking was found to be much more obvious in SFU households (defined as those using SFU dominantly) compared to those non-SFU. There were significantly substantial differences between Azad Kashmir and Punjab because of distinct resources available and economic conditions. Woody materials comprised up to nearly 70% in Azad Kashmir, but in Punjab, gas was frequently used for cooking. Only investigating primary household energy would probably overestimate main energy types that being used for a longer time but underestimated other supplements, suggesting the preference of multiple-energy surveys in household energy studies.

Systematic Evaluation of Two Classical Receptor Models in Source Apportionment of Soil Heavy Metal(loid) Pollution Using Synthetic and Real-World Datasets.

Due to the lack of a priori knowledge on true source makeup and contributions, whether the source apportionment results of Unmix and positive matrix factorization (PMF) are accurate cannot be easily assessed, despite the availability of built-in indicators for their goodness of fit and robustness. This study systematically evaluated, for the first time, the applicability and reliability of these models in source apportionment of soil heavy metal(loid)s with synthetic datasets generated using known source profiles and contributions and a real-world dataset as well. For eight synthetic datasets with different pollution source characteristics, feasible Unmix solutions were close to the true source component compositions (R2 > 0.936; total mean squared errors (MSEs) < 0.04), while those of PMF had significant deviations (R2 of 0.484-0.998; total MSEs of 0.04-0.16). Nonetheless, both models failed to accurately apportion the sources with collinearity or non-normal distribution. Unmix generally outperformed PMF, and its solutions showed much less dependence on sample size than those of PMF. While the built-in indicators provided little hint on the reliability of both models for the real-world dataset, their sample-size dependence indicated that Unmix probably yielded more accurate solutions. These insights could help avoid the potential misuse of Unmix and PMF in source apportionment of soil heavy metal(loid) pollution.

Source contributions and drivers of physiological and psychophysical cobenefits from major air pollution control actions in North China.

North China is among the most polluted regions in the country, and human exposure to PM2.5 (particulate matter with an aerodynamic diameter less than 2.5 µm) in this region has led to severe health consequences. The region has also benefited the most from emission reductions in recent years. It is of interest to understand to what extent and through which paths emissions from different sectors cause adverse health impacts. Here, we present the results of a full evaluation of the health benefits of emission control actions implemented in recent years based on segregated emission inventories with an emphasis on residential emissions. Two major causal paths, one from residential emissions to indoor air pollution, exposure, and premature deaths, and the other from nonresidential emissions to ambient air pollution and psychophysical impacts, were identified and quantified. From 2014 to 2019, both ambient (33%) and indoor (39%) PM2.5 decreased significantly, leading to decreasing trends in exposure (36%), premature deaths (10%), and psychophysical impacts (21%). The Air Pollution Prevention and Control Action Plan, the Clean Heating Campaign, and spontaneous residential shifts to clean energy contributed significantly to these reductions when the effects of other drivers, such as population and economic growth, were excluded.

Variabilities in Primary N-Containing Aromatic Compound Emissions from Residential Solid Fuel Combustion and Implications for Source Tracers.

Nitroaromatic compounds (NACs) not only are strongly absorbing chromophores but also adversely affect human health. NACs can be emitted from incomplete combustions and can derive secondarily through photochemical reactions. Here, emission experiments were conducted for 31 fuel-stove combinations to elucidate variations in, and influencing factors of, NAC emission factors (EF∑NACs) and to explore potential tracers for different combustion sources. EF∑NACs varied by 2 orders of magnitude among different combinations. Differences in fuel type contributed more than the stove difference to the observed variation. EF∑NACs for biomass pellets was approximately 66% lower than that for raw biomass, although the bulk organic and brown carbon EFs were 95% lower. 2-Nitro-1-naphthol was the most abundant individual compound, followed by 4-nitrocatechol, while acid compounds (salicylic acid and benzoic acid) were low in abundance (<1%). Substantially different profiles were observed between coal and biomass burning emissions. Biomass burning had more single-ring-based phenolic compounds with more 4-nitrocatechol, while in coal combustion, more two-ring products were produced. This study demonstrated much lower ratios of 2-nitro-1-naphthol/4-nitrocatechol for biomass in both traditional (2.0 ± 3.5) and improved stoves (3.0 ± 2.1) than for coals (15 ± 6). Coal and biomass burning differed in not only EF∑NACs but also compound profile, consequently leading to distinct health and climate impacts; moreover, the ratio of 2-nitro-1-naphthol/4-nitrocatechol may be used in source apportionment of NACs.

Energy and air pollution benefits of household fuel policies in northern China.

In addition to many recent actions taken to reduce emissions from energy production, industry, and transportation, a new campaign substituting residential solid fuels with electricity or natural gas has been launched in Beijing, Tianjin, and 26 other municipalities in northern China, aiming at solving severe ambient air pollution in the region. Quantitative analysis shows that the campaign can accelerate residential energy transition significantly, and if the planned target can be achieved, more than 60% of households are projected to remove solid fuels by 2021, compared with fewer than 20% without the campaign. Emissions of major air pollutants will be reduced substantially. With 60% substitution realized, emission of primary PM2.5 and contribution to ambient PM2.5 concentration in 2021 are projected to be 30% and 41% of those without the campaign. With 60% substitution, average indoor PM2.5 concentrations in living rooms in winter are projected to be reduced from 209 (190 to 230) µg/m3 to 125 (99 to 150) µg/m3 The population-weighted PM2.5 concentrations can be reduced from 140 µg/m3 in 2014 to 78 µg/m3 or 61 µg/m3 in 2021 given that 60% or 100% substitution can be accomplished. Although the original focus of the campaign was to address ambient air quality, exposure reduction comes more from improved indoor air quality because ∼90% of daily exposure of the rural population is attributable to indoor air pollution. Women benefit more than men.

State-of-the-art OMICS strategies against toxic effects of heavy metals in plants: A review.

Environmental pollution of heavy metals (HMs), mainly due to anthropogenic activities, has received growing attention in recent decades. HMs, especially the non-essential carcinogenic ones, including chromium (Cr), cadmium (Cd), mercury (Hg), aluminum (Al), lead (Pb), and arsenic (As), have appeared as the most significant air, water, and soil pollutants, which adversely affect the quantity, quality, and security of plant-based food all over the world. Plants exposed to HMs could experience significant decline in growth and yield. To avoid or tolerate the toxic effects of HMs, plants have developed complicated defense mechanisms, including absorption and accumulation of HMs in cell organelles, immobilization by forming complexes with organic chelates, extraction by using numerous transporters, ion channels, signalling cascades, and transcription elements, among others. OMICS strategies have developed significantly to understand the mechanisms of plant transcriptomics, genomics, proteomics, metabolomics, and ionomics to counter HM-mediated stress stimuli. These strategies have been considered to be reliable and feasible for investigating the roles of genomics (genomes), transcriptomic (coding), mRNA transcripts (non-coding), metabolomics (metabolites), and ionomics (metal ions) to enhance stress resistance or tolerance in plants. The recent developments in the mechanistic understandings of the HMs-plant interaction in terms of their absorption, translocation, and toxicity invasions at the molecular and cellular levels, as well as plants' response and adaptation strategies against these stressors, are summarized in the present review. Transcriptomics, genomics, metabolomics, proteomics, and ionomics for plants against HMs toxicities are reviewed, while challenges and future recommendations are also discussed.

Evaluation of heavy metal phytoremediation potential of six tree species of Faisalabad city of Pakistan during summer and winter seasons.

Environmental pollution induced by heavy metals has been identified as a leading threat in the modern era. Woody tree species may play a crucial role in the removal of heavy metals from soil and air, thus minimizing pollution potential. The present study was designed to evaluate the phytoremediation potential of six tree species; Azadirachta indica, Cassia fistula, Conocarpus erectus, Eucalyptus camaldulensis, Morus alba, and Populus deltoids, respectively, in the industrial and residential areas of Faisalabad based on the concentrations of lead (Pb), zinc (Zn), cadmium (Cd), and copper (Cu) in their leaves and barks in winter (2018) and summer (2019) seasons. The seasonal contents of heavy metals in both the leaves and barks of these trees decreased in the order of: Zn > Pb > Cu > Cd at both study sites. The highest heavy metal contents were recorded in the leaves and barks of trees grown in the industrial areas as compared to residential areas, with leaves and barks having higher contents of heavy metals in the summer than winter. The tree species exhibited significantly different capacity for heavy metal accumulation, with the accumulation of Cd decreased in the order of: E. camaldulensis > M. alba > C. erectus > A. indica > P. deltoids > C. fistula, and while the order varied for different heavy metals. Overall, M. alba, E. camaldulensis and A. indica performed well in accumulating the targeted heavy metals from the ambient environment. Among the six tree species grown commonly in Faisalabad city, M. alba, E. camaldulensis, and A. indica are recommended for the industrial and residential areas due to their phytoremediation capacity for heavy metals.

Associations between exposure to heavy metals and the risk of chronic kidney disease: a systematic review and meta-analysis.

We performed a systematic review and meta-analysis to examine the relationship between heavy metals (HMs) exposure and the risk of chronic kidney disease (CKD). Databases of Web of Science, Embase, MEDLINE, and Scopus were searched through June 2020 to identify studies assessing the relationships between exposure to HMs (i.e. cadmium, lead, arsenic, mercury) and the risk of CKD, evaluated by decreased estimated glomerular filtration rate (eGFR) and/or increased proteinuria risks in adults (≥18 years). Data were pooled by random-effects models and expressed as weighted mean differences and 95% confidence intervals. The risk of bias was assessed by the Newcastle-Ottawa scale (NOS). Twenty-eight eligible articles (n = 107,539 participants) were included. Unlike eGFR risk (p = 0.10), Cadmium exposure was associated with an increased proteinuria risk (OR = 1.35; 95% CI: 1.13, 1.61; p < 0.001; I2 = 79.7%). Lead exposure was associated with decreased eGFR (OR = 1.12; 95%CI: 1.03, 1.22; p = 0.008; I2 = 87.8%) and increased proteinuria (OR = 1.25; 95% CI: 1.04, 1.49; p = 0.02; I2 = 79.6) risks. Further, arsenic exposure was linked to a decreased eGFR risk (OR = 1.55; 95% CI: 1.05, 2.28; p = 0.03; I2 = 89.1%) in contrast to mercury exposure (p = 0.89). Only two studies reported the link between arsenic exposure and proteinuria risk, while no study reported the link between mercury exposure and proteinuria risk. Exposure to cadmium, lead, and arsenic may increase CKD risk in adults, albeit studies were heterogeneous, warranting further investigations. Our observations support the consideration of these associations for preventative, diagnostic, monitoring, and management practices of CKD.

Toward Clean Residential Energy: Challenges and Priorities in Research.

Solid fuels used for cooking, heating, and lighting are major emission sources of many air pollutants, specifically PM2.5 and black carbon, resulting in adverse environmental and health impacts. At the same time, the transition from using residential solid fuels toward using cleaner energy sources can result in significant health benefits. Here, we briefly review recent research progress on the emissions of air pollutants from the residential sector and the impacts of emissions on ambient and indoor air quality, population exposure, and health consequences. The major challenges and future research priorities are identified and discussed.

Optically Measured Black and Particulate Brown Carbon Emission Factors from Real-World Residential Combustion Predominantly Affected by Fuel Differences.

Residential solid fuel use is an important source of black carbon (BC) but also a main source of uncertainty in BC emission inventories, as reliable real-world emission factors (EFs) and data on consumption of noncommercial household fuels are limited. In this study, particulate BC and brown carbon (BrC) for real-world indoor coal and biomass burning were evaluated using a SootScan model OT21 optical transmissometer from a field campaign including 343 biomass/coal combustion events. The highest BC EF from the burning of coal cake (a mixed fuel locally made from coal and clay) was 1.6-6.4 higher than that of other fuels, and BC EFs were higher for coal combustion than for biomass burning. The highest particulate BrC EF was from charcoal burning and was 1.5-4.3 times higher than that from other biomass and coals. Burning fuel in iron stoves had lower BC and BrC EFs, at approximately 15-66% and 40-54%, respectively, compared with burning in other stove types. The difference between heating and cooking activities was statistically insignificant (p > 0.05). A generalized linear model coupled with dominance analysis evidenced that the EFs were significantly associated with fuel and stove types, with the fuel difference being a major influencing factor explaining 68% of the variation. This suggests that a clean fuel transition would have beneficial impacts on air pollution associated with the residential sector in China. The absorption EFs differed by 2-3 orders of magnitude across different fuel-stove combinations. The Absorption Ångström Exponent values for the particulate from residential solid fuel combustions ranged from 0.92 to 3.7.

Mass Absorption Efficiency of Black Carbon from Residential Solid Fuel Combustion and Its Association with Carbonaceous Fractions.

Black carbon (BC) emissions, derived primarily from incomplete fuel combustion, significantly affect the global and regional climate. Mass absorption efficiency (MAE) is one important parameter in evaluating the climate impacts of BC. Here, values and variabilities in the MAE of BC (MAEBC) from real-world residential emissions were investigated from a field campaign covering 163 burning events for different fuel-stove combinations. MAEBC (average: 12 ± 5 m2/g) was normally distributed and varied greatly by 2 orders of magnitude. Statistically significant differences in MAEBC were found for various fuels, while no significant differences were observed among different stoves. The fuel difference explained 72 ± 7% of the MAEBC variation. MAEBC did not correlate with the modified combustion efficiency but positively correlated with the ratio of organic carbon (OC) to elemental carbon (EC) and negatively correlated with char-EC. The OC/EC ratio was not always lower in coal emissions in comparison to biomass burning emissions. Coal- and biomass-burning emissions had different profiles of carbon fractions. Char-EC, OC, OC/EC, and char-EC/soot-EC can explain 68.7% of the MAEBC variation, providing the potential for predicting MAEBC from the carbon fractions, since they are more commonly measured and available.

Synergistic Health Benefits of Household Stove Upgrading and Energy Switching in Rural China.

Rural residential energy switching from solid fuels to electricity and natural gas has resulted in substantial health benefits in China. Here, we quantitatively estimated the environmental and health benefits of stove upgrading, energy switching, and the interaction of stove upgrading and energy switching in rural mainland China during the period of 1980-2014. Driven by government intervention, technical progress, and socioeconomic development, domestic stoves have been upgraded from a domination of open-fire and traditional stoves to energy-saving, clean stoves, and gas range/electric stoves. Furthermore, stove upgrading significantly contributed to the overall reductions in PM2.5 emissions (25%), ambient and indoor PM2.5 concentrations (49 and 28%), population exposure (31%), and premature deaths (37%) attributable to residential emissions. The interaction between stove upgrading and energy switching resulted in an additional 15% reduction in premature deaths. The influences of the residential sector and the beneficial effects of stove upgrading and energy switching are magnified along the causal path from emissions to health impacts. The overall benefit of the transition in residential energy would be substantially underestimated without considering stove upgrading.