Lipopolysaccharide of Legionella pneumophila Serogroup 1 Facilitates Interaction with Host Cells.

Legionella pneumophila is the primary causative agent of Legionnaires' disease. The mutant-type strain interrupted in the ORF7 gene region responsible for the lipopolysaccharide biosynthesis of the L. pneumophila strain Heysham-1, lacking the O-acetyl groups attached to the rhamnose of the core part, showed a higher surface polarity compared with the wild-type strain. The measurement of excitation energy transfer between fluorophores located on the surface of bacteria and eukaryotic cells showed that, at an early stage of interaction with host cells, the mutant exhibited weaker interactions with Acanthamoeba castellanii cells and THP-1-derived macrophages. The mutant displayed reduced adherence to macrophages but enhanced adherence to A. castellanii, suggesting that the O-acetyl group of the LPS core region plays a crucial role in facilitating interaction with macrophages. The lack of core rhamnose O-acetyl groups made it easier for the bacteria to multiply in amoebae and macrophages. The mutant induced TNF-α production more strongly compared with the wild-type strain. The mutant synthesized twice as many ceramides Cer(t34:0) and Cer(t38:0) than the wild-type strain. The study showed that the internal sugars of the LPS core region of L. pneumophila sg 1 can interact with eukaryotic cell surface receptors and mediate in contacting and attaching bacteria to host cells as well as modulating the immune response to infection.

Immunomodulatory Properties of Polysaccharide-Rich Young Green Barley (Hordeum vulgare) Extract and Its Structural Characterization.

Young green barley (YGB) water extract has revealed a beneficial impact on natural killer (NK) cells' ability to recognize and eliminate human colon cancer cells, without any side effects for normal colon epithelial cells. The direct anticancer effect of the tested compounds has been also shown. The mixture of oligosaccharides found in this extract was characterized by chemical analyses and via FT-IR spectroscopy and MALDI-TOF MS techniques. The YGB preparation contained 26.9% of proteins and 64.2% of sugars, mostly glucose (54.7%) and fructose (42.7%), with a small amount of mannose (2.6%) and galactose (less than 0.5%). Mass spectrometry analysis of YGB has shown that fructose oligomers contained from 3 to 19 sugar units. The number of fructans was estimated to be about 10.2% of the dry weight basis of YGB. The presented results suggest the beneficial effect of the consumption of preparations based on young barley on the human body, in the field of colon cancer prevention.

Multimodal Spectroscopic Imaging of Pea Root Nodules to Assess the Nitrogen Fixation in the Presence of Biofertilizer Based on Nod-Factors.

Multimodal spectroscopic imaging methods such as Matrix Assisted Laser Desorption/Ionization Mass Spectrometry Imaging (MALDI MSI), Fourier Transform Infrared spectroscopy (FT-IR) and Raman spectroscopy were used to monitor the changes in distribution and to determine semi quantitatively selected metabolites involved in nitrogen fixation in pea root nodules. These approaches were used to evaluate the effectiveness of nitrogen fixation by pea plants treated with biofertilizer preparations containing Nod factors. To assess the effectiveness of biofertilizer, the fresh and dry masses of plants were determined. The biofertilizer was shown to be effective in enhancing the growth of the pea plants. In case of metabolic changes, the biofertilizer caused a change in the apparent distribution of the leghaemoglobin from the edges of the nodule to its centre (the active zone of nodule). Moreover, the enhanced nitrogen fixation and presumably the accelerated maturation form of the nodules were observed with the use of a biofertilizer.

The Lipid A from the Lipopolysaccharide of the Phototrophic Bacterium Rhodomicrobium vannielii ATCC 17100 Revisited.

The structure of lipid A from lipopolysaccharide (LPS) of Rhodomicrobium vannielii ATCC 17100 (Rv) a phototrophic, budding bacterium was re-investigated using high-resolution mass spectrometry, NMR, and chemical degradation protocols. It was found that the (GlcpN)-disaccharide lipid A backbone was substituted by a GalpA residue that was connected to C-1 of proximal GlcpN. Some of this GalpA residue was ß-eliminated by alkaline de-acylation, which indicated the possibility of the presence of another so far unidentified substituent at C-4 in non-stoichiometric amounts. One Manp residue substituted C-4' of distal GlcpN. The lipid A backbone was acylated by 16:0(3-OH) at C-2 of proximal GlcpN, and by 16:0(3-OH), i17:0(3-OH), or 18:0(3-OH) at C-2' of distal GlcpN. Two acyloxy-acyl moieties that were mainly formed by 14:0(3-O-14:0) and 16:0(3-O-22:1) occupied the distal GlcpN of lipid A. Genes that were possibly involved in the modification of Rv lipid A were compared with bacterial genes of known function. The biological activity was tested at the model of human mononuclear cells (MNC), showing that Rv lipid A alone does not significantly stimulate MNC. At low concentrations of toxic Escherichia coli O111:B4 LPS, pre-incubation with Rv lipid A resulted in a substantial reduction of activity, but, when higher concentrations of E. coli LPS were used, the stimulatory effect was increased.

Lipid A from Oligotropha carboxidovorans Lipopolysaccharide That Contains Two Galacturonic Acid Residues in the Backbone and Malic Acid A Tertiary Acyl Substituent.

The free-living Gram-negative bacterium Oligotropha carboxidovorans (formerly: Pseudomonas carboxydovorans), isolated from wastewater, is able to live in aerobic and, facultatively, in autotrophic conditions, utilizing carbon monoxide or hydrogen as a source of energy. The structure of O. carboxidovorans lipid A, a hydrophobic part of lipopolysaccharide, was studied using NMR spectroscopy and high-resolution mass spectrometry (MALDI-ToF MS) techniques. It was demonstrated that the lipid A backbone is composed of two d-GlcpN3N residues connected by a ß-(1→6) glycosidic linkage, substituted by galacturonic acids (d-GalpA) at C-1 and C-4' positions. Both diaminosugars are symmetrically substituted by 3-hydroxy fatty acids (12:0(3-OH) and 18:0(3-OH)). Ester-linked secondary acyl residues (i.e., 18:0, and 26:0(25-OH) and a small amount of 28:0(27-OH)) are located in the distal part of lipid A. These very long-chain hydroxylated fatty acids (VLCFAs) were found to be almost totally esterified at the (ω-1)-OH position with malic acid. Similarities between the lipid A of O. carboxidovorans and Mesorhizobium loti, Rhizobium leguminosarum, Caulobacter crescentus as well as Aquifex pyrophylus were observed and discussed from the perspective of the genomic context of these bacteria.

Differences in Production, Composition, and Antioxidant Activities of Exopolymeric Substances (EPS) Obtained from Cultures of Endophytic Fusarium culmorum Strains with Different Effects on Cereals.

Exopolymeric substances (EPS) can determine plant-microorganism interactions and have great potential as bioactive compounds. The different amounts of EPS obtained from cultures of three endophytic Fusarium culmorum strains with different aggressiveness-growth promoting (PGPF), deleterious (DRMO), and pathogenic towards cereal plants-depended on growth conditions. The EPS concentrations (under optimized culture conditions) were the lowest (0.2 g/L) in the PGPF, about three times higher in the DRMO, and five times higher in the pathogen culture. The EPS of these strains differed in the content of proteins, phenolic components, total sugars, glycosidic linkages, and sugar composition (glucose, mannose, galactose, and smaller quantities of arabinose, galactosamine, and glucosamine). The pathogen EPS exhibited the highest total sugar and mannose concentration. FTIR analysis confirmed the ß configuration of the sugars. The EPS differed in the number and weight of polysaccharidic subfractions. The EPS of PGPF and DRMO had two subfractions and the pathogen EPS exhibited a subfraction with the lowest weight (5 kDa). The three EPS preparations (ethanol-precipitated EP, crude C, and proteolysed P) had antioxidant activity (particularly high for the EP-EPS soluble in high concentrations). The EP-EPS of the PGPF strain had the highest antioxidant activity, most likely associated with the highest content of phenolic compounds in this EPS.

Silver Nanoparticles on Chitosan/Silica Nanofibers: Characterization and Antibacterial Activity.

A simple, low-cost, and reproducible method for creating materials with even silver nanoparticles (AgNP) dispersion was established. Chitosan nanofibers with silica phase (CS/silica) were synthesized by an electrospinning technique to obtain highly porous 3D nanofiber scaffolds. Silver nanoparticles in the form of a well-dispersed metallic phase were synthesized in an external preparation step and embedded in the CS/silica nanofibers by deposition for obtaining chitosan nanofibers with silica phase decorated by silver nanoparticles (Ag/CS/silica). The antibacterial activity of investigated materials was tested using Gram-positive and Gram-negative bacteria. The results were compared with the properties of the nanocomposite without silver nanoparticles and a colloidal solution of AgNP. The minimum inhibitory concentration (MIC) of obtained AgNP against Staphylococcus aureus (S. aureus) ATCC25923 and Escherichia coli (E. coli) ATCC25922 was determined. The physicochemical characterization of Ag/CS/silica nanofibers using various analytical techniques, as well as the applicability of these techniques in the characterization of this type of nanocomposite, is presented. The resulting Ag/CS/silica nanocomposites (Ag/CS/silica nanofibers) were characterized by small angle X-ray scattering (SAXS), X-ray diffraction (XRD), and atomic force microscopy (AFM). The morphology of the AgNP in solution, both initial and extracted from composite, the properties of composites, the size, and crystallinity of the nanoparticles, and the characteristics of the chitosan fibers were determined by electron microscopy (SEM and TEM).

Structure, biosynthesis and function of unusual lipids A from nodule-inducing and N2-fixing bacteria.

This review focuses on the chemistry and structures of (Brady)rhizobium lipids A, indispensable parts of lipopolysaccharides. These lipids contain unusual (ω-1) hydroxylated very long chain fatty acids, which are synthesized by a very limited group of bacteria, besides rhizobia. The significance and requirement of the very long chain fatty acids for outer membrane stability as well as the genetics of the synthesis pathway are discussed. The biological role of these fatty acids for bacterial life in extremely different environments (soil and intracellular space within nodules) is also considered.

Studies on lipid A isolated from Phyllobacterium trifolii PETP02T lipopolysaccharide.

The structure of lipid A from lipopolysaccharide of Phyllobacterium trifolii PETP02T, a nitrogen-fixing symbiotic bacterium, was studied. It was found that the lipid A backbone was composed of two 2,3-diamino-2,3-dideoxy-D-glucose (GlcpN3N) residues connected by a ß-(1 â†’ 6) glycosidic linkage, substituted by galacturonic acid (GalpA) at position C-1 and partly decorated by a phosphate residue at C-4' of the non-reducing GlcpN3N. Both diaminosugars were symmetrically substituted by 3-hydroxy fatty acids (14:0(3-OH) and 16:0(3-OH)). Ester-linked secondary acyl residues [i.e. 19:0cyc and 28:0(27-OH) or 28:0(27-4:0(3-OMe))] were located in the distal part of lipid A. A high similarity between the lipid A of P. trifolii and Mesorhizobium was observed and discussed from the perspective of the genetic context of both genomes.

Occurrence of an unusual hopanoid-containing lipid A among lipopolysaccharides from Bradyrhizobium species.

The chemical structures of the unusual hopanoid-containing lipid A samples of the lipopolysaccharides (LPS) from three strains of Bradyrhizobium (slow-growing rhizobia) have been established. They differed considerably from other Gram-negative bacteria in regards to the backbone structure, the number of ester-linked long chain hydroxylated fatty acids, as well as the presence of a tertiary residue that consisted of at least one molecule of carboxyl-bacteriohopanediol or its 2-methyl derivative. The structural details of this type of lipid A were established using one- and two-dimensional NMR spectroscopy, chemical composition analyses, and mass spectrometry techniques (electrospray ionization Fourier-transform ion cyclotron resonance mass spectrometry and MALDI-TOF-MS). In these lipid A samples the glucosamine disaccharide characteristic for enterobacterial lipid A was replaced by a 2,3-diamino-2,3-dideoxy-d-glucopyranosyl-(GlcpN3N) disaccharide, deprived of phosphate residues, and substituted by an α-d-Manp-(1→6)-α-d-Manp disaccharide substituting C-4' of the non-reducing (distal) GlcpN3N, and one residue of galacturonic acid (d-GalpA) α-(1→1)-linked to the reducing (proximal) amino sugar residue. Amide-linked 12:0(3-OH) and 14:0(3-OH) were identified. Some hydroxy groups of these fatty acids were further esterified by long (ω-1)-hydroxylated fatty acids comprising 26-34 carbon atoms. As confirmed by mass spectrometry techniques, these long chain fatty acids could form two or three acyloxyacyl residues. The triterpenoid derivatives were identified as 34-carboxyl-bacteriohopane-32,33-diol and 34-carboxyl-2ß-methyl-bacteriohopane-32,33-diol and were covalently linked to the (ω-1)-hydroxy group of very long chain fatty acid in bradyrhizobial lipid A. Bradyrhizobium japonicum possessed lipid A species with two hopanoid residues.

Structural and immunochemical studies of the lipopolysaccharide from the fish pathogen, Aeromonas bestiarum strain K296, serotype O18.

Chemical analyses and mass spectrometry were used to study the structure of the lipopolysaccharide (LPS) isolated from Aeromonas bestiarum strain K296, serotype O18. ESI-MS revealed that the most abundant A. bestiarum LPS glycoforms have a hexa-acylated or tetra-acylated lipid A with conserved architecture of the backbone, consisting of a 1,4'-bisphosphorylated ß-(1→6)-linked D-GlcN disaccharide with an AraN residue as a non-stoichiometric substituent and a core oligosaccharide composed of Kdo1Hep6Hex1HexN1P1. 1D and 2D NMR spectroscopy revealed that the O-specific polysaccharide (OPS) of A. bestiarum K296 consists of a branched tetrasaccharide repeating unit containing two 6-deoxy-l-talose (6dTalp), one Manp and one GalpNAc residues; thus, it is similar to that of the OPS of A. hydrophila AH-3 (serotype O34) in both the sugar composition and the glycosylation pattern. Moreover, 3-substituted 6dTalp was 2-O-acetylated and additional O-acetyl groups were identified at O-2 and O-4 (or O-3) positions of the terminal 6dTalp. Western blots with polyclonal rabbit sera showed that serotypes O18 and O34 share some epitopes in the LPS. The very weak reaction of the anti-O34 serum with the O-deacylated LPS of A. bestiarum K296 might have been due to the different O-acetylation pattern of the terminal 6dTalp. The latter suggestion was further confirmed by NMR.

Structure of the lipopolysaccharide O-antigen of Serratia spp. strains 10.1WK and 1XS plant endophytes isolated from O. biennis and L. corniculatus.

O-specific polysaccharides (O-PSs) isolated from lipopolysaccharides of Serratia spp., strains 10.1WK and 1XS, which are endophytic bacteria of Oenothera biennis (common evening-primrose) and Lotus corniculatus (bird's-foot trefoil), plants growing on a petroleum hydrocarbon polluted site in the Silesia region, were investigated. The high-molecular-weight O-PS fractions liberated from lipopolysaccharides by mild acid hydrolysis were studied using chemical methods, MALDI-TOF mass spectrometry, and a set of 1D and 2D NMR spectroscopy techniques. It was found that both O-specific polysaccharides were built of an identical trisaccharide repeating unit composed of d-Rhap and d-Manp residues. The following structure of the O-PSs of Serratia spp. strains 10.1WK and 1XS was established: →4)-α-d-Rhap-(1 â†’ 3)-ß-d-Manp-(1 â†’ 4)-ß-d-Rhap-(1→.

Structure of the lipopolysaccharide O-antigen of endophytic Pseudomonas sp. strain L1.

The O-specific polysaccharide (OPS) was isolated from the lipopolysaccharide of Pseudomonas sp. Strain L1, the endophytic bacteria of Lolium perenne (ryegrass) plants growing in soil in an industrial area in the Silesia region (Zabrze, Southern Poland). The high-molecular-weight O-PS fraction liberated from Pseudomonas sp. L1 lipopolysaccharide by mild acid hydrolysis was studied using chemical methods, MALDI-TOF mass spectrometry, and 1D and 2D NMR spectroscopy techniques. It was found that the O-specific polysaccharide was built of tetrasaccharide repeating units composed of d-FucpN, d-Fucp4N, and two d-QuipN residues. The following structure of the O-PS of Pseudomonas sp. Strain L1 was established: [Formula: see text].

Impact of Sinorhizobium meliloti Exopolysaccharide on Adsorption and Aggregation in the Copper(II) Ions/Supporting Electrolyte/Kaolinite System.

To obtain insight into physicochemical interactions between Cu(II) ions, kaolinite, and exopolysaccharide (EPS) synthesized by Sinorhizobium meliloti Rm 1021 soil bacteria, an adsorption, electrokinetic, and aggregation study was performed in the selected systems. The obtained data showed that supporting electrolyte type affects both EPS and Cu(II) ions adsorption. For initial Cu(II) concentration 100 mg/L, 4.36 ± 0.25 mg/g (21.80 ± 1.00%) of the ions were adsorbed in 0.001 M NaCl and 3.76 ± 0.20 mg/g (18.80 ± 1.00%) in 0.001 M CaCl2. The experimental data were best fitted to the Langmuir model as well as pseudo second-order equation. The EPS adsorbed amount on kaolinite was higher in the CaCl2 electrolyte than in NaCl one. For an initial polymer concentration of 100 mg/L, the EPS adsorbed amount was 4.69 ± 0.08 mg/g (23.45 ± 0.40%) in 0.001 M NaCl and 5.26 ± 0.15 mg/g (26.32 ± 0.75%) in 0.001 M CaCl2. In the mixed system, regardless of electrolyte type, exopolysaccharide contributed to immobilization of higher amount of copper(II) ions on the clay mineral. Also, in the samples containing heavy metal ions and exopolysaccharide simultaneously, the aggregation of kaolinite particles was the strongest. The results presented in the paper may be very helpful in soil bioremediation, especially in the development of technologies reducing the mobility of heavy metals in the environment.

The structure of a novel neutral lipid A from the lipopolysaccharide of Bradyrhizobium elkanii containing three mannose units in the backbone.

The chemical structure of the lipid A of the lipopolysaccharide (LPS) from Bradyrhizobium elkanii USDA 76 (a member of the group of slow-growing rhizobia) has been established. It differed considerably from lipids A of other Gram-negative bacteria, in that it completely lacks negatively charged groups (phosphate or uronic acid residues); the glucosamine (GlcpN) disaccharide backbone is replaced by one consisting of 2,3-dideoxy-2,3-diamino-D-glucopyranose (GlcpN3N) and it contains two long-chain fatty acids, which is unusual among rhizobia. The GlcpN3N disaccharide was further substituted by three D-mannopyranose (D-Manp) residues, together forming a pentasaccharide. To establish the structural details of this molecule, 1D and 2D NMR spectroscopy, chemical composition analyses and high-resolution mass spectrometry methods (electrospray ionisation Fourier-transform ion cyclotron resonance mass spectrometry (ESI FT-ICR MS) and tandem mass spectrometry (MS/MS)) were applied. By using 1D and 2D NMR spectroscopy experiments, it was confirmed that one D-Manp was linked to C-1 of the reducing GlcpN3N and an alpha-(1-->6)-linked D-Manp disaccharide was located at C-4' of the non-reducing GlcpN3N (alpha-linkage). Fatty acid analysis identified 12:0(3-OH) and 14:0(3-OH), which were amide-linked to GlcpN3N. Other lipid A constituents were long (omega-1)-hydroxylated fatty acids with 26-33 carbon atoms, as well as their oxo forms (28:0(27-oxo) and 30:0(29-oxo)). The 28:0(27-OH) was the most abundant acyl residue. As confirmed by high-resolution mass spectrometry techniques, these long-chain fatty acids created two acyloxyacyl residues with the 3-hydroxy fatty acids. Thus, lipid A from B. elkanii comprised six acyl residues. It was also shown that one of the acyloxyacyl residues could be further acylated by 3-hydroxybutyric acid (linked to the (omega-1)-hydroxy group).

The Effect of Water-Soluble Polysaccharide from Jackfruit (Artocarpus heterophyllus Lam.) on Human Colon Carcinoma Cells Cultured In Vitro.

Various phytochemical studies have revealed that jackfruit (Artocarpus heterophyllus Lam.) is rich in bioactive compounds, including carotenoids, flavonoids, volatile acids, tannins, and lectins. The aim of the study was to analyze the biological activity of water-soluble polysaccharide (WSP) isolated from jackfruit and to assess its immunomodulatory, cytotoxic, and anti-oxidative effects on human colon carcinoma cells in vitro. The neutral red (NR) uptake assay revealed no toxic influence of the polymer on the viability of tumor cells (HT29 and SW620). After 24 h and 48 h of incubation, the cellular viability was not lower than 94%. The metabolic activity of the cells (MTT) at the compound concentration of 250 µg/mL was higher than 92% in comparison to the control. WSP (250 µg/mL) exerted no significant effect on the morphology of the cells was determined by May-Grünwald-Giemsa staining. WSP changed nitric oxide (NOx) production by the tumor cells depending on the time of incubation and prior 2-h stimulation of the cells with E. coli 0111:B4 LPS. It significantly stimulated IL-1ß production by the tumor cells. The IL-6 level increased but that of IL-10 decreased by a WSP concentration-dependent manner. No such effect was detected in SW620. The WSP had antioxidant properties. In conclusion, water-soluble polysaccharide isolated from A. heterophyllus exhibits significant biological activity towards many types of both normal and cancerous cells. Therefore, it may be considered as a useful agent in the protection of human health or in functional and dietary nutrition.

Fungal (1 → 3)-α-d-glucans as a new kind of biosorbent for heavy metals.

Although the fungal ability to bind heavy metals has been known for many years, it was not determined which component is responsible for this process. The aim of the study was to isolate (1 → 3)-α-d-glucans from various fungi, select the most efficient compound in the biosorption of heavy metals, and determine its characteristics. The best α-glucan for treatment of aqueous solutions from heavy metals (Ni2+, Cd2+, Zn2+, Pb2+) is the polymer isolated from Shiitake, especially its SH 37 variety. Using various techniques, it was confirmed that the studied polysaccharide consists mainly of glucose molecules (75.9%), i.e. glucose α-anomers linked by (1 → 3)-linkage (86%). The well-developed surface, low crystallinity, and the large number of -OH groups provide this polymer with good sorption properties. Probably, the main mechanism of metal uptake is metabolism-independent process that depends on the content and spatial structure of the glucans present in their cell wall.

The Role of Legionella pneumophila Serogroup 1 Lipopolysaccharide in Host-Pathogen Interaction.

The Legionella pneumophila TF3/1 mutant of the Corby strain, which possesses a point mutation in the active site of the O-acetyltransferase, synthesized the polysaccharide chain with a reduced degree of substitution with O-acetyl groups. The mutant did not produce a high-molecular-weight lipopolysaccharide (LPS) fraction above 12 kDa. The disturbances in LPS synthesis have an effect on the composition of other macromolecules (lipids and proteins), as indicated by differences in the infrared absorption spectra between the L. pneumophila Corby strain and its TF3/1 mutant. The wild-type strain contained less N+-CH3 and C-N groups as well as more CH3 groups than the mutant. The fatty acid composition showed that the wild type strain synthesized more branched acyl residues (a15:0, i16:0, and a17:0), a less unsaturated acid (16:1), and a straight-chain acid (18:0) than the mutant. The mutant synthesized approximately twice more a long-chain fatty acid (20:0) than the wild type. The main differences in the phospholipids between both strains were found in the classes of phosphatidylcholines and phosphatidylglycerols (PG). Substantial differences in the cell surface topography of these bacteria and their nanomechanical properties were shown by atomic force microscopy (AFM). The wild type strain had no undulated surface and produced numerous vesicles. In the case of the mutant type, the vesicles were not numerous, but there were grooves on the cell surface. The average roughness of the cell surface of the mutant was approximately twofold higher than in the wild-type strain. In turn, the wild-type strain exhibited much better adhesive properties than the mutant. The kinetic study of the interaction between the L. pneumophila strains and Acanthamoeba castellanii monitored by Förster resonance energy transfer revealed a pronounced difference, i.e., almost instantaneous and highly efficient binding of the L. pneumophila Corby strain to the amoeba surface, followed by penetration into the amoeba cells. This process was clearly not as efficient in the case of the mutant. The results point to LPS and, in particular, to the length of the polysaccharide fraction as an important L. pneumophila determinant involved in the process of adhesion to the host cell.

Characterization of a novel lipid A structure isolated from Azospirillum lipoferum lipopolysaccharide.

The structure of lipid A from Azospirillum lipoferum, a plant-growth-promoting rhizobacterium, was investigated. It was determined by chemical analysis, mass spectrometric methods, as well as 1D and 2D NMR spectroscopy. Because of the presence of substituents, the investigated lipid A differs from typical enterobacterial lipid A molecules. Its backbone is composed of a beta-(1,6)-linked D-glucosamine disaccharide but lacks phosphate residues. Moreover, the reducing end of the backbone (position C-1) is substituted with alpha-linked d-galacturonic acid. 3-hydroxypalmitoyl residues are exclusively connected to amino groups of the glucosamine disaccharide. Hydroxyls at positions C-3 and C-3' are esterified with 3-hydroxymyristic acids. Primary polar fatty acids are partially substituted by nonpolar fatty acids (namely, 18:0, 18:1 or 16:0), forming acyloxyacyl moieties.

Chemical characterization of alkali-soluble polysaccharides isolated from a Boletus edulis (Bull.) fruiting body and their potential for heavy metal biosorption.

Wild mushrooms are gathered and consumed in many regions of the world. Edible mushrooms are a good source of valuable nutritious ingredients but they also are able to accumulate heavy metals from the environment. Participation of polysaccharide components of mushroom cell walls in biosorption is poorly understood, therefore, our investigations focussed on an alkali-soluble polysaccharide derived from the cell wall of Boletus edulis. Its chemical structure is described based on chemical analysis, GPC, NMR and FT-IR and other instrumental techniques. The polysaccharide contained mainly C-3 substituted α-d-glucose and α-d-mannose. The ratio between these components was 10:4. We postulate the polymer is a (1 → 3)-linked α-d-glucan decorated by α-(1 → 3)-d-mannose chains. The molecular mass of the polysaccharide was estimated at about 850 kDa. Biosorption of heavy metal ions (Cd, Cu, Zn and Pb) by the tested polymer was measured using AAS techniques. The polysaccharide has a high ability to accumulate lead and cadmium.