Iontronic analog of synaptic plasticity: Hydrogel-based ionic diode with chemical precipitation and dissolution.

In this study, an aqueous nonlinear synaptic element showing plasticity behavior is developed, which is based on the chemical processes in an ionic diode. The device is simple, fully ionic, and easily configurable, requiring only two terminals-for input and output-similar to biological synapses. The key processes realizing the plasticity features are chemical precipitation and dissolution, which occur at forward- or reverse-biased ionic diode junctions in appropriate reservoir electrolytes. Given that the precipitate acts as a physical barrier in the circuit, the above processes change the diode conductivity, which can be interpreted as adjusting "synaptic weight" of the system. By varying the operating conditions, we first demonstrate the four types of plasticity that can be found in biological system: long-term potentiation/depression and short-term potentiation/depression. The plasticity of the proposed iontronic device has characteristics similar to those of neural synapses. To demonstrate its potential use in comparatively complex information processing, we develop a precipitation-based iontronic synapse (PIS) capable of both potentiation and depression. Finally, we show that the postsynaptic signals from the multiple excitatory or inhibitory PISs can be integrated into the total "dendritic" current, which is a function of time and input history, as in actual hippocampal neural circuits.

In Situ Real-Time Dendritic Growth Determination of Electrodeposits on Ultramicroelectrodes.

Monitoring the dendritic electrodeposition process is crucial in various fields such as energy storage devices and sensors. A variety of in situ dendritic growth monitoring methods have been developed, especially for battery applications, but they require specialized cells and equipment and are often invasive, making them unsuitable for various electrochemical systems and commercial batteries. To address these challenges, a real-time impedance analysis technique was used to determine dendritic electrodeposition on microelectrodes. The "effective size" of the electrodeposit was extracted from the impedance data, and the dendritic growth was assessed in real-time by comparing "effective size" to a theoretical radius assuming hemispherical growth. The technique was validated using scanning electron microscopy imaging and finite element method simulation. Initially applied to gold electrodeposition, the method was extended to zinc electrodeposition, demonstrating potential utilization for energy storage systems.

Photothermal Enhancement of Ion Current for Red Blood Cell Flow Cytometry.

Blood cell counting typically requires complex machinery. Flow cytometers used for this purpose involve precise optical alignment, costly detectors, and pretreatment with fluorescent labels. Coulter countertype devices, which monitor ion current, are simpler. However, conventional Coulter counters provide only information about size, making it impossible to distinguish similarly sized lymphocytes from red blood cells (RBCs). Inspired by the fact that RBCs have an exceptionally high propensity to absorb light and convert it to heat, i.e., photothermal effect, this study proposes integrating photothermal phenomena into a microfluidic Coulter counting chip. Photothermal heat selectively amplifies the ion current from RBCs over other components including lymphocytes. The combination of ion current monitoring and the photothermal effect for RBC counting suggests an evolution toward versatile flow cytometers.

Molecular and radiopathologic spectrum between HCC and intrahepatic cholangiocarcinoma.

BACKGROUND AND AIMS: Primary liver cancers (LCs), including HCC and intrahepatic cholangiocarcinoma (iCCA), are derived from a common developmental lineage, conferring a molecular spectrum between them. To elucidate the molecular spectrum, we performed an integrative analysis of transcriptome profiles associated with patients' radiopathologic features. APPROACH AND RESULTS: We identified four LC subtypes (LC1-LC4) from RNA-sequencing profiles, revealing intermediate subtypes between HCC and iCCA. LC1 is a typical HCC characterized by active bile acid metabolism, telomerase reverse transcriptase promoter mutations, and high uptake of gadoxetic acid in MRI. LC2 is an iCCA-like HCC characterized by expression of the progenitor cell-like trait, tumor protein p53 mutations, and rim arterial-phase hyperenhancement in MRI. LC3 is an HCC-like iCCA, mainly small duct (SD) type, associated with HCC-related etiologic factors. LC4 is further subclassified into LC4-SD and LC4-large duct iCCAs according to the pathological features, which exhibited distinct genetic variations (e.g., KRAS , isocitrate dehydrogenase 1/2 mutation, and FGF receptor 2 fusion), stromal type, and prognostic outcomes. CONCLUSIONS: Our integrated view of the molecular spectrum of LCs can identify subtypes associated with transcriptomic, genomic, and radiopathologic features, providing mechanistic insights into heterogeneous LC progression.

Amidoxime-Containing Zr and Hf Atomic Layer Deposition Precursors for Metal Oxide Thin Films.

In this article, we discuss the synthesis of eight novel zirconium and hafnium complexes containing amidoxime ligands as potential precursors for atomic layer deposition (ALD). Two amidoximes, viz., (E)-N'-hydroxy-N,N-dimethylacetimidamide (mdaoH) and (Z)-N'-hydroxy-N,N-dimethylpivalimidamide (tdaoH), along with their Zr and Hf homoleptic complexes, Zr(mdao)4 (1), Hf(mdao)4 (2), Zr(tdao)4 (3), and Hf(tdao)4 (4) were prepared. We further synthesized heteroleptic compounds with different physical properties by introducing cyclopentadienyl (Cp) ligand, namely, CpZr(mdao)3 (5), CpHf(mdao)3 (6), CpZr(tdao)3 (7), and CpHf(tdao)3 (8). Thermogravimetric analysis was used for the assessment of the evaporation characteristics of complexes 1, 2, 5, and 6, and it revealed multistep weight losses with high residues. On the other hand, the thermogravimetric analysis curves of complexes 3, 4, 7, and 8 comprising tdao ligands revealed single-step weight losses with moderate residues. Single-crystal X-ray diffraction studies of complexes 1, 3, and 7 showed that all of the complexes have monomeric molecular structures. Complex 7 exhibited a low melting point (75 °C), good volatility, and high thermal stability compared with other complexes. Therefore, an atomic layer deposition process for the growth of ZrO2 was developed by using ZrCp(tdao)3 (7) as a novel precursor.

Role of a cyclopentadienyl ligand in a heteroleptic alkoxide precursor in atomic layer deposition.

Alkoxide precursors have been highlighted for depositing carbon-free films, but their use in Atomic Layer Deposition (ALD) often exhibits a non-saturated growth. This indicates no self-limiting growth due to the chain reaction of hydrolysis or ligand decomposition caused by ß-hydride elimination. In the previous study, we demonstrated that self-limiting growth of ALD can be achieved using our newly developed precursor, hafnium cyclopentadienyl tris(N-ethoxy-2,2-dimethyl propanamido) [HfCp(edpa)3]. To elucidate the growth mechanism and the role of cyclopentadienyl (Cp) ligand in a heteroleptic alkoxide precursor, herein, we compare homoleptic and heteroleptic Hf precursors consisting of N-ethoxy-2,2-dimethyl propanamido (edpa) ligands with and without cyclopentadienyl ligand-hafnium tetrakis(N-ethoxy-2,2-dimethyl propanamido) [Hf(edpa)4] and HfCp(edpa)3. We also investigate the role of a Cp ligand in growth characteristics. By substituting an alkoxide ligand with a Cp ligand, we could modify the surface reaction during ALD, preventing undesired reactions. The last remaining edpa after Hf(edpa)4 adsorption can undergo a hydride elimination reaction, resulting in surface O-H generation. In contrast, Cp remains after the HfCp(edpa)3 adsorption. Accordingly, we observe proper ALD growth with self-limiting properties. Thus, a comparative study of different ligands of the precursors can provide critical clues to the design of alkoxide precursors for obtaining typical ALD growth with a saturation behavior.

Mesoporous Metal Fluoride Nanocomposite Films with Tunable Optical Properties Derived from Precursor Instability.

The precisely tailored refractive index of optical materials is the key to utilizing and manipulating light during its propagation through the matrix, thereby improving their application performances. In this paper, mesoporous metal fluoride films with engineered composition (MgF2 :LaF3 ) are demonstrated to achieve finely tunable refractive indices. These films are prepared using a precursor-derived one-step assembly approach via the simple mixing of precursor solutions (Mg(CF3 OO)2 and La(CF3 OO)3 ); then pores are formed simultaneously during solidification owing to the inherent instability of La(CF3 OO)3 . The mesoporous structures are realized through Mg(CF3 OO)2 and La(CF3 OO)3 ions, which interacted with each other based on their electrostatic forces, providing a wide range of refractive indices (from 1.37 to 1.16 at 633 nm). Furthermore, it is systematically several MgF2(1-x) -LaF3(x) layers with different compositions (x = 0.0, 0.3, and 0.5) to form the graded refractive index coating that is optically consecutive between the substrate and the air for broadband and omnidirectional antireflection. An average transmittance of ≈98.03% (400-1100 nm) is achieved with a peak transmittance of ≈99.04% (at 571 nm), and the average antireflectivity is maintained at ≈15.75% even at an incidence of light of 65° (400-850 nm).

Preoperative computed tomography assessment of circumferential resection margin in retroperitonealized colon cancer predicts disease-free survival.

OBJECTIVES: The aim of this retrospective study was to predict circumferential resection margin (CRM) involvement on preoperative CT, and prognostic impact of CRM assessment by CT (ctCRM) in patients with retroperitonealized colon cancer. METHODS: This study included patients who underwent resection for ascending or descending colon cancer between July 2010 and February 2013. Positive ctCRM was defined as tumor distance to the retromesenteric plane of ≤ 1 mm. The origin of positive CRM was divided into primary tumor or other tumor components including lymph nodes, tumor deposits, or extramural venous invasions. Logistic regression analysis was performed to identify preoperative factors to predict pathologic CRM (pCRM). A Cox proportional hazards model was used in multivariable analysis to determine the preoperative factors affecting disease-free survival (DFS). RESULTS: A total of 274 patients (mean age, 64.0 years ± 11.0 [standard deviation]; 157 men) with retroperitonealized colon cancer were evaluated. Of 274 patients, 67 patients (24.5%) had positive CRM on surgical pathology. The accuracy of preoperative CT in predicting pCRM was 79.6% (218/274). Among preoperative factors, only CRM assessment on CT was independently associated with pCRM (p < 0.001). Positive ctCRM by primary tumor was an independent factor for DFS (HR, 3.362 [1.714-6.593]) and systemic recurrence (HR, 3.715 [1.787-7.724], but not for local recurrence on multivariable analyses. CONCLUSIONS: Preoperative CT can accurately predict pCRM, and positive ctCRM by primary tumor is an independent risk factor for DFS and systemic recurrence, but not for local recurrence in retroperitonealized colon cancer. KEY POINTS: • Preoperative CT can predict pathologic circumferential resection margin (CRM) with approximately 80% of accuracy in patients with retroperitonealized colon cancer. • Positive CRM by a primary tumor on preoperative CT is a poor prognostic factor for disease-free survival and systemic recurrence in patients with retroperitonealized colon cancer. • CRM involvement on CT was not associated with local recurrence in patients with retroperitonealized colon cancer.

Amidoxime-Containing Ti Precursors for Atomic Layer Deposition of TiN Thin Films with Suppressed Columnar Microstructure.

This paper reports the synthesis of three novel titanium complexes containing amidoxime ligands as potential precursors for titanium nitride (TiN) thin films fabricated using atomic layer deposition (ALD). A series of ligands, viz., N'-methoxy-N-methylacetimidamide (mnnoH), N'-ethoxy-N-methylacetimidamide (ennoH), and N'-methoxy-N-methylbenzimidamide (pnnoH), were successfully synthesized and used to produce Ti(mnno)(NMe2)3 (4), Ti(enno)(NMe2)3 (5), and Ti(pnno)(NMe2)3 (6). Thermogravimetric analysis curves of complexes 4-6 revealed a single-step weight loss up to 200 °C. Pyrolysis occurred beyond 200 °C. Among the three new complexes, 5 was liquid at room temperature. Therefore, TiN was synthesized by ALD using Ti(enno)(NMe2)3 (5) as a novel precursor. A TiN thin film was deposited from the Ti(enno)(NMe2)3 (5) precursor and NH3 plasma, and self-limiting growth was achieved by varying the injection/purge duration. TiN thin film growths were observed with a growth per cycle (GPC) of 0.05-0.13 nm·cy-1 at deposition temperatures between 150 and 300 °C, while the measured resistivity was as low as 420 µΩ·cm. The high reactivity of the precursor promotes nucleation, resulting in TiN thin films with smooth, good step coverage and preferentially orientated microstructure.

Reorganization energy in a polybromide ionic liquid measured by scanning electrochemical cell microscopy.

Room temperature ionic liquids (RT-ILs) are promising electrolytes for electrocatalysis. Understanding the effects of the electrode-electrolyte interface structure on electrocatalysis in RT-ILs is important. Ultrafast mass transport of redox species in N-methyl-N-ethyl-pyrrolidinium polybromide (MEPBr2n+1) enabled evaluation of the reorganization energy (λ), which reflects the solvation structure in the inner Helmholtz plane (IHP). λ was achieved by fitting the electron transfer rate-limited voltammogram at a Pt ultramicroelectrode (UME) to the Marcus-Hush-Chidsey model for heterogeneous electron transfer kinetics. However, it is time-consuming or even impossible to prepare electrode materials, including alloys of numerous compositions in the form of UME, for each experiment. Herein, we report a method to evaluate the λ of MEPBr2n+1 by scanning electrochemical cell microscopy (SECCM), which allows high throughput electrochemical measurements using a single electrode with high spatial resolution. Fast mass transport in the nanosized SECCM tip is critical for achieving heterogeneous electron transfer-limited voltammograms. Furthermore, investigating λ on a high-entropy alloy materials library composed of Pt, Pd, Ru, Ir, and Ag suggests a negative correlation between λ and the work function. Given that the potential of zero charge correlates with the work function of electrodes, this can be attributed to the surface-charge sensitive ionic structure in the IHP of MEPBr2n+1, modulating the solvation energy of the redox-active species in the IHP.

Cathodic electroorganic reaction on silicon oxide dielectric electrode.

The faradaic reaction at the insulator is counterintuitive. For this reason, electroorganic reactions at the dielectric layer have been scarcely investigated despite their interesting aspects and opportunities. In particular, the cathodic reaction at a silicon oxide surface under a negative potential bias remains unexplored. In this study, we utilize defective 200-nm-thick n+-Si/SiO2 as a dielectric electrode for electrolysis in an H-type divided cell to demonstrate the cathodic electroorganic reaction of anthracene and its derivatives. Intriguingly, the oxidized products are generated at the cathode The experiments under various conditions provide consistent evidence supporting that the electrochemically generated hydrogen species, supposedly the hydrogen atom, is responsible for this phenomenon. The electrogenerated hydrogen species at the dielectric layer suggests a synthetic strategy for organic molecules.

Acidic Hydrogen Evolution Electrocatalysis at High-Entropy Alloys Correlates with its Composition-Dependent Potential of Zero Charge.

The vast possibilities in the elemental combinations of high-entropy alloys (HEAs) make it essential to discover activity descriptors for establishing rational electrocatalyst design principles. Despite the increasing attention on the potential of zero charge (PZC) of hydrogen evolution reaction (HER) electrocatalyst, neither the PZC of HEAs nor the impact of the PZC on the HER activity at HEAs has been described. Here, we use scanning electrochemical cell microscopy (SECCM) to determine the PZC and the HER activities of various elemental compositions of a Pt-Pd-Ru-Ir-Ag thin-film HEA materials library (HEA-ML) with high statistical reliability. Interestingly, the PZC of Pt-Pd-Ru-Ir-Ag is linearly correlated with its composition-weighted average work function. The HER current density in acidic media positively correlates with the PZC, which can be explained by the preconcentration of H+ in the electrical double layer at potentials negative of the PZC.

A Unified Synthetic Strategy to Introduce Heteroatoms via Electrochemical Functionalization of Alkyl Organoboron Reagents.

Based on systematic electrochemical analysis, an integrated synthetic platform of C(sp3)-based organoboron compounds was established for the introduction of heteroatoms. The electrochemically mediated bond-forming strategy was shown to be highly effective for the functionalization of sp3-hybridized carbon atoms with significant steric hindrance. Moreover, virtually all the nonmetallic heteroatoms could be utilized as reaction partners using one unified protocol. The observed reactivity stems from the two consecutive single-electron oxidations of the substrate, which eventually generates an extremely reactive carbocation as the key intermediate. The detailed reaction profile could be elucidated through multifaceted electrochemical studies. Ultimately, a new dimension in the activation strategies for organoboron compounds was accomplished through the electrochemically driven reaction development.

Adopting Back Reduction Current as an Additional Output Signal for Achieving Photoelectrochemical Differentiated Detection.

Photoelectrochemical (PEC) sensors are usually based on a single output signal, that is, the photocurrent change caused by the (photoelectro)chemical reaction between target analytes and photoelectrodes. However, the photocurrent may be influenced by redox species other than the target analyte; therefore, modifying the surface of photoelectrodes with probes that selectively bind to the analyte is essential. Moreover, even though various surface modification methods have been developed, distinguishing molecularly similar chemicals using PEC sensing systems remains a significant challenge. To address these selectivity issues, we proposed a photoanode-based PEC sensor that utilizes a cathodic transient current as a second output signal in addition to the photocurrent, which arises from the back reduction of photo-oxidized species. Factors influencing the back reduction were investigated by observing the transient photocurrent of hematite photoanodes in the presence of model redox probes. The chemical environment around the electrode-electrolyte interface was manipulated by altering the electrolyte composition or modifying the electrode surface. The favorable interaction between the electrode surface and redox species led to an increase in the extent of back reduction and the cathodic transient current. In addition, the extent of back reduction also depends on the chemical identity of the redox species, such as the kinetics of subsequent chemical reactions. Therefore, the synergistic combination of the photocurrent and the cathodic transient current enabled the differentiated detection of various catecholamine neurotransmitters with a single pristine photoelectrode, which has never been achieved using traditional PEC methods. Revisiting the transient photocurrent can complement conventional PEC applications and offers possibilities for more effective semiconductor-based applications.

Revisiting Thin-Layer Electrochemistry in a Chip-Type Cell for the Study of Electro-organic Reactions.

It is important but challenging to elucidate the electrochemical reaction mechanisms of organic compounds using electroanalytical methods. Particularly, a rapid and straightforward method that provides information on reaction intermediates or other key electrochemical parameters may be useful. In this work, we exploited the advantages of classic thin-layer electrochemistry to develop a thin-layer electroanalysis microchip (TEAM). The TEAM provided better-resolved voltammetric peaks than under semi-infinite diffusion conditions owing to its small height. Importantly, rapid and accurate determination of the number of electrons transferred, n, was enabled by mechanically confining the microliter-scale volume analyte at the electrode, while securing ionic conduction using polyelectrolyte gels. The performance of the TEAM was validated using voltammetry and coulometry of standard redox couples. Utilizing the TEAM, a (spectro)electrochemical analysis of FM 1-43, an organic dye widely used in neuroscience, was successfully performed. Moreover, the TEAM was applied to study the electrochemical oxidation mechanism of pivanilides and alkyltrifluoroborate salts with different substituents and solvents. This work suggests that TEAM is a promising tool to provide invaluable mechanistic information and promote the rational design of electrosynthetic strategies.

Highly Photosensitive Lead Sulfide Thin Films Grown by H2 S Free MOCVD Using a Single Source Metal-Organic Precursor.

High-quality lead sulfide (PbS) films are deposited on selected substrate chemistries by an H2 S-free metal-organic chemical vapor deposition (MOCVD) process using a single-source metal-organic complex (Pb(dmampS)2 ). The complex is synthesized via a salt metathesis reaction between PbCl2  and lithium 1-(dimethylamino)-2-methylpropane-2-thiolate (Li(dmampS)) in diethyl ether. Subsequent film deposition is conducted by a simple thermolysis process in the absence of H2 S, yet chemical and structural analysis confirm chemically stoichiometric and homogenous films. Mechanistic studies with electron impact mass spectroscopy (EIMS) and gas chromatography mass spectroscopy (GCMS) suggest the selective cleavage of C-S bonds in the complex as the reason for the facile PbS formation with negligible impurity incorporation. The high crystallinity, low hole concentrations, and charge transport properties comparable and in many cases superior to films produced by atomic layer deposition (ALD) testify to the quality of the films. Lastly, rigid and flexible photodetectors fabricated with the PbS films exhibit considerably high photocurrents, reliable switching characteristics, and high sensitivity over a broad spectral bandwidth, highlighting the potential for realizing practical broadband photodetectors.

Ion-to-ion amplification through an open-junction ionic diode.

As biological signals are mainly based on ion transport, the differences in signal carriers have become a major issue for the intimate communication between electrical devices and biological areas. In this respect, an ionic device which can directly interpret ionic signals from biological systems needs to be designed. Particularly, it is also required to amplify the ionic signals for effective signal processing, since the amount of ions acquired from biological systems is very small. Here, we report the signal amplification in ionic systems as well as sensing through the modified design of polyelectrolyte hydrogel-based ionic diodes. By designing an open-junction structure, ionic signals from the external environment can be directly transmitted to an ionic diode. Moreover, the minute ionic signals injected into the devices can also be amplified to a large amount of ions. The signal transduction mechanism of the ion-to-ion amplification is suggested and clearly verified by revealing the generation of breakdown ionic currents during an ion injection. Subsequently, various methods for enhancing the amplification are suggested.

Universal Suzuki-Miyaura Catalyst-Transfer Polymerization for Precision Synthesis of Strong Donor/Acceptor-Based Conjugated Polymers and Their Sequence Engineering.

Catalyst-transfer polymerization has revolutionized the field of polymer synthesis due to its living character, but for a given catalyst system, the polymer scope is rather narrow. Herein we report a highly efficient Suzuki-Miyaura catalyst-transfer polymerization (SCTP) that covers a wide range of monomers from electron-rich (donor, D) to electron-deficient (acceptor, A) (hetero)arenes by rationally designing boronate monomers and using commercially available Buchwald RuPhos and SPhos Pd G3 precatalysts. Initially, we optimized the controlled polymerization of 3,4-propylenedioxythiophene (ProDOT), benzotriazole (BTz), quinoxaline (QX), and 2,3-diphenylquinoxaline (QXPh) by introducing new boronates, such as 4,4,8,8-tetramethyl-1,3,6,2-dioxazaborocane and its N-benzylated derivative, to modulate the reactivity and stability of the monomers. As a result, PProDOT, PBTz, PQX, and PQXPh were prepared with controlled molecular weight and narrow dispersity (D < 1.29) in excellent yield (>85%). A detailed investigation of the polymer structures using 1H NMR and MALDI-TOF spectrometry supported the chain-growth mechanism and the high initiation efficiency of the SCTP method. In addition, the use of RuPhos-Pd showing excellent catalyst-transfer ability on both D/A monomers led to unprecedented controlled D-A statistical copolymerization, thereby modulating the HOMO energy level (from -5.11 to -4.80 eV) and band gap energy (from 1.68 to 1.91 eV) of the resulting copolymers. Moreover, to demonstrate the living nature of SCTP, various combinations of D-A and A-A block copolymers (PBTz-b-PProDOT, PQX-b-PProDOT, and PQX-b-PBTz) were successfully prepared by the sequential addition method. Finally, simple but powerful one-shot D-A block copolymerization was achieved by maximizing the rate difference between a fast-propagating pinacol boronate donor and a slow-propagating acceptor to afford well-defined poly(3-hexylthiophene)-b-poly(benzotriazole).

Group IV Transition Metal (M = Zr, Hf) Precursors for High-κ Metal Oxide Thin Films.

This paper describes the synthesis of eight novel zirconium and hafnium complexes containing N-alkoxy carboxamidate-type ligands, as potential precursors for metal oxides and atomic layer deposition (ALD) for HfO2. A series of ligands, viz., N-ethoxy-2,2-dimethylpropanamide (edpaH), N-ethoxy-2-methylpropanamide (empaH), and N-methoxy-2,2-dimethylpropanamide (mdpaH), were used to afford complexes Zr(edpa)4 (1), Hf(edpa)4 (2), Zr(empa)4 (3), Hf(empa)4 (4), Zr(mdpa)4 (5), Hf(mdpa)4 (6), ZrCp(edpa)3 (7), and HfCp(edpa)3 (8). Thermogravimetric analysis curves assessed for the evaporation characteristics of complexes 1-8 revealed single-step weight losses with low residues, except for the mdpa-containing complexes. Single-crystal X-ray diffraction studies of 1, 2, 5, and 6 revealed that all the complexes have monomeric molecular structures, with the central metal ion surrounded by eight oxygen atoms from the four bidentate alkoxyalkoxide ligands. Among the complexes prepared, 8 exhibited a low melting point (64 °C), good volatility (1 Torr at 112 °C), high thermal stability, and excellent endurance over 6 weeks at 120 °C. Therefore, an ALD process for the growth of HfO2 was developed using HfCp(edpa)3 (8) as a novel precursor. Furthermore, the HfO2 film exhibited a low capacitance equivalent oxide thickness of ∼1.5 nm, with Jg as low as ∼3 × 10-4 A/cm2 at Vg -1 V in a metal-insulator-semiconductor capacitor (Au/HfO2/p-Si).

Full-Color-Tunable Nanophotonic Device Using Electrochromic Tungsten Trioxide Thin Film.

Color generation based on strategically designed plasmonic nanostructures is a promising approach for display applications with unprecedented high-resolution. However, it is disadvantageous in that the optical response is fixed once the structure is determined. Therefore, obtaining high modulation depth with reversible optical properties while maintaining its fixed nanostructure is a great challenge in nanophotonics. In this work, dynamic color tuning and switching using tungsten trioxide (WO3), a representative electrochromic material, are demonstrated with reflection-type and transmission-type optical devices. Thin WO3 films incorporated in simple stacked configurations undergo dynamic color change by the adjustment of their dielectric constant through the electrochromic principle. A large resonance wavelength shift up to 107 nm under an electrochemical bias of 3.2 V could be achieved by the reflection-type device. For the transmission-type device, on/off switchable color pixels with improved purity are demonstrated of which transmittance is modulated by up to 4.04:1.