RESUMEN
Waste polypropylene (PP) has been pyrolysed to obtain mainly a liquid tar product of high yield (83.5%) with the balance as gas (15.5%) and a little residue (1.0%). The elemental composition of the PP tar was: C: 87.1%, H: 12.6% and O+others: 0.4% (by difference). The tar samples have been characterised by gas chromatography/mass spectrometry, heated-probe mass spectrometry and laser -desorption mass spectrometry (LD- MS), to give molecular mass distributions for comparison with molecular mass ranges indicated by size-exclusion chromatography (SEC). About 50% of the tar was soluble in 1-methyl-2-pyrrolidinone, the solvent used for SEC. It appeared to consist mostly of low molecular mass materials with elution time at 20-27 min. Mass ranges from SEC and LD-MS agreed approximately in showing the upper mass limit of the tar to be about 1200 u, consisting of aromatics, alkenes, dialkenes and only minor quantities of alkanes.
RESUMEN
Casein has been pyrolysed to obtain a biochar (28.3% yield), with mostly meso- and macro-pore structure, and a liquid tar product of high yield (37.5%) with the balance as gas (20.9%) and water (13.3%). The elemental composition of the casein tar was: C 66.7%, H 8.3%, N 12.1% and O 12.9% (by difference). The tar sample has been characterised by mass spectrometry, gas chromatography (GC)/MS and heated-probe MS, to give molecular mass distributions for comparison with molecular mass ranges indicated by analytical-scale size-exclusion chromatography (SEC). The tar appeared to be completely soluble in 1-methyl-2-pyrrolidinone (NMP), the solvent used for SEC. It appeared to consist mostly of lower molecular mass fractions with elution times at 18-26 min. GC/MS analysis showed the presence of both aliphatic and aromatic nitrogen-containing components. Neither GC/MS nor heated-probe MS were able to detect more than about half the tar components.