Simulation and misalignment analysis of the gain ratio of a polarization Mie Raman lidar.

The gain ratio is a critical parameter in a polarization Mie lidar. Calibrating the gain ratio is essential in aerosol classification studies. We developed a ray-tracing-based simulation method to investigate the impact of mounting errors on the gain ratio. In this method, a computational model for each element of the lidar was built, and Zemax was used to simulate the lidar receiver to obtain the optical gain ratio by theoretical calculations. This method can analyze the influence of each element's mounting errors and offer a theoretical foundation for the machining and mounting accuracy of the lidar design. The correctness of the model was verified by applying it to a single-wavelength polarization Mie Raman lidar.

Simulation and misalignment analysis of the gain ratio of a polarization Mie Raman lidar: publisher's note.

This publisher's note serves to correct an error in Appl. Opt.61, 2881 (2022)APOPAI0003-693510.1364/AO.453852.

Dual-wavelength-excitation aerosol fluorescence spectra detection using combined spectrometer with Czerny-Turner design.

We developed a dual-wavelength-excitation aerosol fluorescence spectra detection device prototype. In our system, the 263 nm and 355 nm lasers are used to sequentially excite the fluorescence of aerosol stream, which is located spatially and temporally by two crossed infrared lasers; a bifurcated fiber bundle is applied to receive the fluorescence spectra of 274-463 nm and 374-565 nm. Besides, with a 32-channel photomultiplier tube as detector, a self-developed combined spectrometer with Czerny-Turner design is employed to detect the two band spectra in a preset timing sequence. Experiments show that the system can detect the fluorescence spectra, after dual-wavelength-excitation, of three intrinsic fluorophore samples and three bioaerosol samples.