Application of pyridine-modified chitosan derivative for simultaneous adsorption of Cu(II) and oxyanions of Cr(VI) from aqueous solution.

The bioadsorbent C1, which is a chitosan derivative prepared in a one-step synthesis, was successfully used to adsorb Cr(VI) and Cu(II) simultaneously. Here, for the first time the simultaneous adsorption of a cation and an anion was modeled using the Corsel model for kinetics and the Real Adsorbed Solution Theory model for equilibrium data. Batch studies of the adsorption of Cu(II) and Cr(VI) in single and binary aqueous solutions were performed as a function of initial solute concentration, contact time, and solution pH. The maximum adsorption capacities of C1 in single and binary aqueous solutions were 1.84 and 1.13 mmol g-1 for Cu(II) and 3.86 and 0.98 mmol g-1 for Cr(VI), respectively. The reuse of C1 was investigated, with Cu(II) ions being almost completely desorbed and fully re-adsorbed. For Cr(VI), the desorption was incomplete resulting in a lower re-adsorption. Energy-dispersive X-ray spectroscopy was used for mapping the distributions of Cr(VI) and Cu(II) adsorbed on the C1 surface in single and binary adsorption systems. Isothermal titration calorimetry experiments were performed for Cr(VI) and Cu(II) adsorption in single solutions. The thermodynamic parameters of adsorption showed that the adsorption of both metal ions was enthalpically driven, but entropically unfavorable.

Thermodynamics of Aggregation between the Cationic Surfactant and Polymer Based on Biodegradable Poly(vinyl Alcohol).

The formation of aggregates between carboxylated (PVCOOH) or neutral hydrolyzed (PVOH) poly(vinyl alcohol) and hexadecylpyridinium chloride (C16PyCl) was examined by conductimetry, turbidimetry, and isothermal titration calorimetry (ITC) in the presence of different NaCl concentrations. The interaction between the polymers and C16PyCl in pure water showed a critical aggregation concentration (cac = 0.8 mmol L-1) only for the neutral polymer. PVCOOH interacted with the surfactant through electrostatic attraction, forming macroscopic aggregates. Integral enthalpy changes for aggregate formation (ΔHagg) obtained from ITC curves varied from -0.61 (for the PVOH system in pure water) to -4.14 kJ mol-1 (for PVOH in the presence of 10.0 mmol L-1 NaCl), indicating that the formation of the aggregates was enthalpically favored. However, hydrophobic interactions drove the process for low surfactant concentration for both polymers. Saturation concentrations (C2) obtained from conductimetry were smaller than those from ITC, revealing that the binding of C16PyCl on the chain of the polymers at higher surfactant concentrations shows the same electric properties as that of free micelles on the solution. Increase of the ionic strength favored the aggregation and decreased the complexity of the ITC curves, suggesting that the reorganization of the surfactant monomers on the polymeric chain with the increase in their concentration was suppressed.

Anthocyanin immobilization in carboxymethylcellulose/starch films: A sustainable sensor for the detection of Al(III) ions in aqueous matrices.

A robust and sustainable sensor for the detection of Al(III) ions in water was developed by immobilization of anthocyanin (AN) from black rice in a film formed by carboxymethylcellulose (CMC) and starch. Characterization of the films was performed using solubility, thickness, FTIR, and mechanical analysis. The film exhibited an irreversible color change from red to purple in response to the presence of Al(III). The best colorimetric response of the sensor was observed at pH 4.5 and a time of 60 min, achieving the detection of 3 mg L-1 of Al(III). For concentrations higher than 5 mg L-1, the sensor response time decreased to 20 min. The minimum Al(III) concentration detected with the naked eye was lower than the maximum permissible concentrations in aqueous effluents according to different legislations, indicating the potential of this study to develop sensors for the detection of Al(III).