RESUMEN
In nanoscale structures with rotational symmetry, such as quantum rings, the orbital motion of electrons combined with a spin-orbit interaction can produce a very strong and anisotropic Zeeman effect. Since symmetry is sensitive to electric fields, ring-like geometries provide an opportunity to manipulate magnetic properties over an exceptionally wide range. In this work, we show that it is possible to form rotationally symmetric confinement potentials inside a semiconductor quantum dot, resulting in electron orbitals with large orbital angular momentum and strong spin-orbit interactions. We find complete suppression of Zeeman spin splitting for magnetic fields applied in the quantum dot plane, similar to the expected behavior of an ideal quantum ring. Spin splitting reappears as orbital interactions are activated with symmetry-breaking electric fields. For two valence electrons, representing a common basis for spin-qubits, we find that modulating the rotational symmetry may offer new prospects for realizing tunable protection and interaction of spin-orbital states.
RESUMEN
We explore the energetics of microwaves interacting with a double quantum dot photodiode and show wave-particle aspects in photon-assisted tunneling. The experiments show that the single-photon energy sets the relevant absorption energy in a weak-drive limit, which contrasts the strong-drive limit where the wave amplitude determines the relevant-energy scale and opens up microwave-induced bias triangles. The threshold condition between these two regimes is set by the fine-structure constant of the system. The energetics are determined here with the detuning conditions of the double dot system and stopping-potential measurements that constitute a microwave version of the photoelectric effect.
RESUMEN
Earth-abundant transition metal phosphides are promising materials for energy-related applications. Specifically, copper(I) phosphide is such a material and shows excellent photocatalytic activity. Currently, there are substantial research efforts to synthesize well-defined metal-semiconductor nanoparticle heterostructures to enhance the photocatalytic performance by an efficient separation of charge carriers. The involved crystal facets and heterointerfaces have a major impact on the efficiency of a heterostructured photocatalyst, which points out the importance of synthesizing potential photocatalysts in a controlled manner and characterizing their structural and morphological properties in detail. In this study, we investigated the interface dynamics occurring around the synthesis of Ag-Cu3P nanoparticle heterostructures by a chemical reaction between Ag-Cu nanoparticle heterostructures and phosphine in an environmental transmission electron microscope. The major product of the Cu-Cu3P phase transformation using Ag-Cu nanoparticle heterostructures with a defined interface as a template preserved the initially present Ag{111} facet of the heterointerface. After the complete transformation, corner truncation of the faceted Cu3P phase led to a physical transformation of the nanoparticle heterostructure. In some cases, the structural rearrangement toward an energetically more favorable heterointerface has been observed and analyzed in detail at the atomic level. The herein-reported results will help better understand dynamic processes in Ag-Cu3P nanoparticle heterostructures and enable facet-engineered surface and heterointerface design to tailor their physical properties.
RESUMEN
In this Letter, we explore the use of thermodynamic length to improve the performance of experimental protocols. In particular, we implement Landauer erasure on a driven electron level in a semiconductor quantum dot, and compare the standard protocol in which the energy is increased linearly in time with the one coming from geometric optimization. The latter is obtained by choosing a suitable metric structure, whose geodesics correspond to optimal finite-time thermodynamic protocols in the slow driving regime. We show experimentally that geodesic drivings minimize dissipation for slow protocols, with a bigger improvement as one approaches perfect erasure. Moreover, the geometric approach also leads to smaller dissipation even when the time of the protocol becomes comparable with the equilibration timescale of the system, i.e., away from the slow driving regime. Our results also illustrate, in a single-electron device, a fundamental principle of thermodynamic geometry: optimal finite-time thermodynamic protocols are those with constant dissipation rate along the process.
RESUMEN
We study experimentally work fluctuations in a Szilard engine that extracts work from information encoded as the occupancy of an electron level in a semiconductor quantum dot. We show that as the average work extracted per bit of information increases toward the Landauer limit k_{B}Tln2, the work fluctuations decrease in accordance with the work fluctuation-dissipation relation. We compare the results to a protocol without measurement and feedback and show that when no information is used, the work output and fluctuations vanish simultaneously, contrasting the information-to-energy conversion case where increasing amount of work is produced with decreasing fluctuations. Our study highlights the importance of fluctuations in the design of information-to-work conversion processes.
RESUMEN
Controlled formation of non-equilibrium crystal structures is one of the most important challenges in crystal growth. Catalytically grown nanowires are ideal systems for studying the fundamental physics of phase selection, and could lead to new electronic applications based on the engineering of crystal phases. Here we image gallium arsenide (GaAs) nanowires during growth as they switch between phases as a result of varying growth conditions. We find clear differences between the growth dynamics of the phases, including differences in interface morphology, step flow and catalyst geometry. We explain these differences, and the phase selection, using a model that relates the catalyst volume, the contact angle at the trijunction (the point at which solid, liquid and vapour meet) and the nucleation site of each new layer of GaAs. This model allows us to predict the conditions under which each phase should be observed, and use these predictions to design GaAs heterostructures. These results could apply to phase selection in other nanowire systems.
RESUMEN
The world of environmental microscopy provides the possibility to study and analyze transformations and reactions during realistic conditions to understand the processes better. We report on the design and development of a metal-organic chemical vapor deposition (MOCVD) system integrated with an environmental transmission electron microscope intended for real-time investigations of crystal growth. We demonstrate methods for achieving a wide range of precisely controlled concentrations of precursor gas at the sample, as well as for calibrating the sample partial pressure using the pressure measured elsewhere in the microscope column. The influences of elevated temperature and reactive gas within the pole-piece gap are evaluated with respect to imaging and spectroscopy. We show that X-ray energy-dispersive spectroscopy can be strongly affected by temperatures beyond 500$^{\circ }$C, while the spatial resolution is largely unaffected by heat and microscope pressure for the relevant conditions. Finally, the influence of the electron beam on the investigated processes is discussed. With this work, we aim to provide crucial input in the development of advanced in situ electron microscopy systems for studies of complex reactions in real time under realistic conditions, for instance as used during formation of semiconductor crystals.
RESUMEN
We study usingin situtransmission electron microscopy the birth of GaAs nanowires from liquid Au-Ga catalysts on amorphous substrates. Lattice-resolved observations of the starting stages of growth are reported here for the first time. It reveals how the initial nanostructure evolves into a nanowire growing in a zincblende ã111ã or the equivalent wurtziteã0001ã direction. This growth direction(s) is what is typically observed in most III-V and II-VI nanowires. However, the reason for this preferential nanowire growth along this direction is still a dilemma. Based on the videos recorded shortly after the nucleation of nanowires, we argue that the lower catalyst droplet-nanowire interface energy of the {111} facet when zincblende (or the equivalent {0001} facet in wurtzite) is the reason for this direction selectivity in nanowires.
RESUMEN
The electronic band structure of complex nanostructured semiconductors has a considerable effect on the final electronic and optical properties of the material and, ultimately, on the functionality of the devices incorporating them. Valence electron energy-loss spectroscopy (VEELS) in the transmission electron microscope (TEM) provides the possibility of measuring this property of semiconductors with high spatial resolution. However, it still represents a challenge for narrow-bandgap semiconductors, since an electron beam with low energy spread is required. Here we demonstrate that by means of monochromated VEELS we can study the electronic band structure of narrow-gap materials GaSb and InAs in the form of heterostructured nanowires, with bandgap values down to 0.5 eV, especially important for newly developed structures with unknown bandgaps. Using complex heterostructured InAs-GaSb nanowires, we determine a bandgap value of 0.54 eV for wurtzite InAs. Moreover, we directly compare the bandgaps of wurtzite and zinc blende polytypes of GaSb in a single nanostructure, measured here as 0.84 and 0.75 eV, respectively. This allows us to solve an existing controversy in the band alignment between these structures arising from theoretical predictions. The findings demonstrate the potential of monochromated VEELS to provide a better understanding of the band alignment at the heterointerfaces of narrow-bandgap complex nanostructured materials with high spatial resolution. This is especially important for semiconductor device applications where even the slightest variations of the electronic band structure at the nanoscale can play a crucial role in their functionality.
RESUMEN
It is now possible to synthesize the wurtzite crystal phase of most III-V semiconductors in the form of nanowires. This sparks interest for fundamental research and adds extra degrees of freedom for designing novel devices. However, the understanding of many properties, such as phonon dispersion, of these wurtzite semiconductors is not yet complete, despite the extensive number of studies published. The E2L and E2H phonon modes exist in the wurtzite crystal phase only (not in zinc blende) where the E2H mode has been already experimentally observed in Ga and In arsenides and phosphides, while the E2L mode has been observed in GaP, but not in GaAs or InP. In order to determine the energy of E2L in wurtzite GaAs and InP, we performed Raman scattering measurements on wurtzite GaAs and InP nanowires. We found clear evidence of the E2L phonon mode at 64 cm-1 and 54 cm-1, respectively. Polarization-dependent experiments revealed similar selection rules for both the E2L and the E2H phonon modes (as expected) where the intensity peaked with excitation and detection polarization being perpendicular to the [0001] crystallographic direction. We further find that the splitting between the E1(TO) and A1(TO) modes is around 2 cm-1 in wurtzite GaAs and below 1 cm-1 in wurtzite InP. We believe these results will be useful for a better understanding of phonons in wurtzite crystal phase of III-V semiconductors as well as for testing and improving phonon dispersion calculations.
RESUMEN
Subgap states in semiconducting-superconducting nanowire hybrid devices are controversially discussed as potential topologically nontrivial quantum states. One source of ambiguity is the lack of an energetically and spatially well defined tunnel spectrometer. Here, we use quantum dots directly integrated into the nanowire during the growth process to perform tunnel spectroscopy of discrete subgap states in a long nanowire segment. In addition to subgap states with a standard magnetic field dependence, we find topologically trivial subgap states that are independent of the external magnetic field, i.e., that are pinned to a constant energy as a function of field. We explain this effect qualitatively and quantitatively by taking into account the strong spin-orbit interaction in the nanowire, which can lead to a decoupling of Andreev bound states from the field due to a spatial spin texture of the confined eigenstates. This result constitutes an important step forward in the research on superconducting subgap states in nanowires, such as Majorana bound states.
RESUMEN
Growing GaAs nanowires with well-defined crystal structures is a challenging task, but may be required for the fabrication of future devices. In terms of crystal phase selection, the connection between theory and experiment is limited, leaving experimentalists with a trial and error approach to achieve the desired crystal structures. In this work, we present a modeling approach designed to provide the missing connection, combining classical nucleation theory, stochastic simulation, and mass transport through the seed particle. The main input parameters for the model are the flows of the growth species and the temperature of the process, giving the simulations the same flexibility as experimental growth. The output of the model can also be directly compared to experimental observables, such as crystal structure of each bilayer throughout the length of the nanowire and the composition of the seed particle. The model thus enables for observed experimental trends to be directly explored theoretically. Here, we use the model to simulate nanowire growth with varying As flows, and our results match experimental trends with a good agreement. By analyzing the data from our simulation, we find theoretical explanations for these experimental results, providing new insights into how the crystal structure is affected by the experimental parameters available for growth.
RESUMEN
Particle-assisted III-V semiconductor nanowire growth and applications thereof have been studied extensively. However, the stability of nanowires in contact with the particle and the particle chemical composition as a function of temperature remain largely unknown. In this work, we use in situ transmission electron microscopy to investigate the interface between a Au-Ga particle and the top facet of an ⟨1Ì 1Ì 1Ì ⟩-oriented GaAs nanowire grown via the vapor-liquid-solid process. We observed a thermally activated bilayer-by-bilayer removal of the GaAs facet in contact with the liquid particle during annealing between 300 and 420 °C in vacuum. Interestingly, the GaAs-removal rates initially depend on the thermal history of the sample and are time-invariant at later times. In situ X-ray energy dispersive spectroscopy was also used to determine that the Ga content in the particle at any given temperature remains constant over extended periods of time and increases with increasing temperature from 300 to 400 °C. We attribute the observed phenomena to droplet-assisted decomposition of GaAs at a rate that is controlled by the amount of Ga in the droplet. We suggest that the observed transients in removal rates are a direct consequence of time-dependent changes in the Ga content. Our results provide new insights into the role of droplet composition on the thermal stability of GaAs nanowires and complement the existing knowledge on the factors influencing nanowire growth. Moreover, understanding the nanowire stability and decomposition is important for improving processing protocols for the successful fabrication and sustained operation of nanowire-based devices.
RESUMEN
The opportunity to engineer III-V nanowires in wurtzite and zinc blende crystal structure allows for exploring properties not conventionally available in the bulk form as well as opening the opportunity for use of additional degrees of freedom in device fabrication. However, the fundamental understanding of the nature of polytypism in III-V nanowire growth is still lacking key ingredients to be able to connect the results of modeling and experiments. Here we show InP nanowires of both pure wurtzite and pure zinc blende grown simultaneously on the same InP [100]-oriented substrate. We find wurtzite nanowires to grow along [Formula: see text] and zinc blende counterparts along [Formula: see text]. Further, we discuss the nucleation, growth, and polytypism of our nanowires against the background of existing theory. Our results demonstrate, first, that the crystal growth conditions for wurtzite and zinc blende nanowire growth are not mutually exclusive and, second, that the interface energies predominantly determine the crystal structure of the nanowires.
Asunto(s)
Cristalización , Nanocables/química , Zinc/química , Tamaño de la Partícula , Especificidad por Sustrato , Propiedades de SuperficieRESUMEN
Controllable particle assisted growth (PAG) of III-V nanowires is today almost exclusively done with Au, Ga or In nanoparticles, whereas other metals often yield nanowires with uncontrolled growth directions. To improve the control of the initial growth direction in PAG, independent of choice of metal, we propose to initiate nanowire growth from a group-III-rich foreign metal particle. For III-V nanowire growth, the group III concentration of the particle can be made to increase or decrease with the relative supply of group III and group V material, which can be used to promote the liquid phase that is necessary for vapor-liquid-solid growth. In this paper, 30 nm Pd nanoparticles are used to develop growth conditions for In-rich PAG of InAs nanowires. The particle size evolution for different growth times and V/III ratios is correlated with changes in nanowire density and morphology. In addition, we demonstrate In-rich Co, Pd, Pt and Rh nanoparticles and optimized In-rich PAG from Au and Pd seeds. The Au and Pd seeded nanowires are remarkably similar and by tuning the particle composition we trigger a morphological change. The vertical nanowire morphology is associated with In-rich nanoparticles that contain a liquid phase. The curly nanowire morphology, with random growth directions have an In concentration less than or equal to that of the most In rich compound of the seed metal-In system.
RESUMEN
Over the past decade, III-V heterostructure nanowires have attracted a surge of attention for their application in novel semiconductor devices such as tunneling field-effect transistors (TFETs). The functionality of such devices critically depends on the specific atomic arrangement at the semiconductor heterointerfaces. However, most of the currently available characterization techniques lack sufficient spatial resolution to provide local information on the atomic structure and composition of these interfaces. Atomic-resolution spectrum imaging by means of electron energy-loss spectroscopy (EELS) in the scanning transmission electron microscope (STEM) is a powerful technique with the potential to resolve structure and chemical composition with sub-angstrom spatial resolution and to provide localized information about the physical properties of the material at the atomic scale. Here, we demonstrate the use of atomic-resolution EELS to understand the interface atomic arrangement in three-dimensional heterostructures in semiconductor nanowires. We observed that the radial interfaces of GaSb-InAs heterostructure nanowires are atomically abrupt, while the axial interface in contrast consists of an interfacial region where intermixing of the two compounds occurs over an extended spatial region. The local atomic configuration affects the band alignment at the interface and, hence, the charge transport properties of devices such as GaSb-InAs nanowire TFETs. STEM-EELS thus represents a very promising technique for understanding nanowire physical properties, such as differing electrical behavior across the radial and axial heterointerfaces of GaSb-InAs nanowires for TFET applications.
RESUMEN
Using AlSb as the model system, we demonstrate that kinetic limitations can lead to the preferential growth of wurtzite (WZ) AlSb shells rather than the thermodynamically stable zinc-blende (ZB) AlSb and that the WZ and ZB relative thickness can be tuned by a careful control of the deposition parameters. We report selective heteroepitaxial radial growth of AlSb deposited by metal-organic vapor phase epitaxy (MOVPE) on InAs nanowire core templates with engineered lengths of axial WZ and ZB segments. AlSb shell thickness, crystal phase, nanostructure, and composition are investigated as a function of the shell growth temperature, Ts, using scanning electron microscopy, transmission electron microscopy, electron tomography, and energy-dispersive X-ray spectroscopy. We find that ZB- and WZ-structured AlSb shells grow heteroepitaxially around the ZB and WZ segments of the InAs core, respectively. Surprisingly, at 390 < Ts < 450 °C, the WZ-AlSb shells are thicker than the ZB-AlSb shells, and their thickness increases with decreasing Ts. In comparison, the ZB-AlSb shell thicknesses increase slightly with increasing Ts. We find that the increased thickness of the WZ-AlSb shells is due to the formation and enhanced deposition on {112Ì 0} facets rather than on the more commonly grown {101Ì 0} sidewall facets. Overall, these results, which are in direct contrast with previous reports suggesting that heteroepitaxial radial growth of III-antimonides is always favored on the ZB-structure facets, indicate that the growth of WZ-AlSb is preferred over the thermodynamically stable ZB-AlSb at lower growth temperatures. We attribute this behavior to kinetic limitations of MOVPE of AlSb on ZB and WZ phases of InAs.
RESUMEN
We demonstrate the control of multiphoton electron excitations in InAs nanowires (NWs) by altering the crystal structure and the light polarization. Using few-cycle, near-infrared laser pulses from an optical parametric chirped-pulse amplification system, we induce multiphoton electron excitations in InAs nanowires with controlled wurtzite (WZ) and zincblende (ZB) segments. With a photoemission electron microscope, we show that we can selectively induce multiphoton electron emission from WZ or ZB segments of the same wire by varying the light polarization. Developing ab initio GW calculations of first to third order multiphoton excitations and using finite-difference time-domain simulations, we explain the experimental findings: While the electric-field enhancement due to the semiconductor/vacuum interface has a similar effect for all NW segments, the second and third order multiphoton transitions in the band structure of WZ InAs are highly anisotropic in contrast to ZB InAs. As the crystal phase of NWs can be precisely and reliably tailored, our findings open up for new semiconductor optoelectronics with controllable nanoscale emission of electrons through vacuum or dielectric barriers.
RESUMEN
The physical properties of material largely depend on their crystal structure. Nanowire growth is an important method for attaining metastable crystal structures in III-V semiconductors, giving access to advantageous electronic and surface properties. Antimonides are an exception, as growing metastable wurtzite structure has proven to be challenging. As a result, the properties of these materials remain unknown. One promising means of accessing wurtzite antimonides is to use a wurtzite template to facilitate their growth. Here, a template technique using branched nanowire growth for realizing wurtzite antimonide material is demonstrated. On wurtzite InAs trunks, InAs1-x Sbx branch nanowires at different Sb vapor phase compositions are grown. For comparison, branches on zinc blende nanowire trunks are also grown under identical conditions. Studying the crystal structure and the material composition of the grown branches at different xv shows that the Sb incorporation is higher in zinc blende than in wurtzite. Branches grown on wurtzite trunks are usually correlated with stacking defects in the trunk, leading to the emergence of a zinc blende segment of higher Sb content growing parallel to the wurtzite structure within a branch. However, the average amount of Sb incorporated within the branch is determined by the vapor phase composition.
RESUMEN
We study spin transport in the one- and two-electron regimes of parallel-coupled double quantum dots (DQDs). The DQDs are formed in InAs nanowires by a combination of crystal-phase engineering and electrostatic gating, with an interdot tunnel coupling (t) tunable by one order of magnitude. Large single-particle energy separations (up to 10 meV) and |g^{*}| factors (â¼10) enable detailed studies of the B-field-induced transition from a singlet-to-triplet ground state as a function of t. In particular, we investigate how the magnitude of the spin-orbit-induced singlet-triplet anticrossing depends on t. For cases of strong coupling, we find values of 230 µeV for the anticrossing using excited-state spectroscopy. Experimental results are reproduced by calculations based on rate equations and a DQD model including a single orbital in each dot.