Amorphous/Crystalline Phases Mixed Nanosheets Array Rich in Oxygen Vacancies Boost Oxygen Evolution Reaction of Spinel Oxides in Alkaline Media.

As promising oxygen evolution reaction (OER) catalysts, spinel-type oxides face the bottleneck of weak adsorption for oxygen-containing intermediates, so it is challenging to make a further breakthrough in remarkably lowering the OER overpotential. In this study, a novel strategy is proposed to substantially enhance the OER activity of spinel oxides based on amorphous/crystalline phases mixed spinel FeNi2O4 nanosheets array, enriched with oxygen vacancies, in situ grown on a nickel foam (NF). This unique architecture is achieved through a one-step millisecond laser direct writing method. The presence of amorphous phases with abundant oxygen vacancies significantly enhances the adsorption of oxygen-containing intermediates and changes the rate-determining step from OH*→O* to O*→OOH*, which greatly reduces the thermodynamic energy barrier. Moreover, the crystalline phase interweaving with amorphous domains serves as a conductive shortcut to facilitate rapid electron transfer from active sites in the amorphous domain to NF, guaranteeing fast OER kinetics. Such an anodic electrode exhibits a nearly ten fold enhancement in OER intrinsic activity compared to the pristine counterpart. Remarkably, it demonstrates record-low overpotentials of 246 and 315 mV at 50 and 500 mA cm-2 in 1 m KOH with superior long-term stability, outperforming other NiFe-based spinel oxides catalysts.

Glycine modified copper promotes CO2 electroreduction to multi-carbon products: a computational study.

Molecular modification strategy exhibits great potential for electrocatalytic CO2 reduction. Here, DFT calculations were applied to study the mechanism of CO2 electroreduction on glycine modified copper. The results indicate that the interaction between the modified molecule and the intermediate could change the reaction energy of CO2 electroreduction.

Epitaxial Growth of High-Energy Copper Facets for Promoting Hydrogen Evolution Reaction.

Copper is known as a conductive metal but an inert catalyst for the hydrogen evolution reaction due to its inappropriate electronic structure. In this work, an active copper catalyst is prepared with high-energy surfaces by adopting the friction stir welding (FSW) technique. FSW can mix the immiscible Fe and Cu materials homogenously and heat them to a high temperature. Resultantly, α-Fe transforms into γ-Fe, and low-energy γ-Fe (100) and (110) surfaces induce the epitaxial growth of high-energy Cu (110) and (100) planes, respectively. After the removal of γ-Fe by acid etching, the copper electrode exposes high-energy surface and exhibits excellent acidic HER activity, even being superior to Pt foil at high current densities (>66 mA cm-2 ). Density functional theory calculation reveals that the high-energy surface favors the adsorption of hydrogen intermediate, thus accelerating the hydrogen evolution reaction. The epitaxial growth induced by FSW opens a new avenue toward engineering high-performance catalysts. In addition, FSW makes it possible to massively fabricate low-cost catalyst, which is advantageous to industrial application.

Highly Conjugated Graphitic Carbon Nitride Nanofoam for Photocatalytic Hydrogen Evolution.

As a metal-free photocatalyst, graphitic carbon nitride (g-CN) shows great potential for photocatalytic water splitting, although its performance is significantly limited by structural defects due to incomplete polymerization. In the present work, we successfully synthesize highly conjugated g-CN nanofoam through an iodide substitution technique. The product possesses a high polymerization degree, low defect density, and large specific surface area; as a result, it achieves a hydrogen evolution rate of 9.06 mmol h-1 g-1 under visible light irradiation, with an apparent quantum efficiency (AQE) of 18.9% at 420 nm. Experimental analysis and theoretical calculations demonstrate that the recombination of photogenerated carriers at C-NHx defects was effectively depressed in the nanofoam, giving rise to the high photocatalytic activity.

Exposing Cu(100) Surface via Ion-Implantation-Induced Oxidization and Etching for Promoting Hydrogen Evolution Reaction.

Metallic materials with unique surface structure have attracted much attention due to their unique physical and chemical properties. However, it is hard to prepare bulk metallic materials with special crystal faces, especially at the nanoscale. Herein, we report an efficient method to adjust the surface structure of a Cu plate which combines ion implantation technology with the oxidation-etching process. The large number of vacancies generated by ion implantation induced the electrochemical oxidation of several atomic layers in depth; after chemical etching, the Cu(100) planes were exposed on the surface of the Cu plate. As a catalyst for acid hydrogen evolution reaction, the Cu plate with (100) planes merely needs 273 mV to deliver a current density of 10 mA/cm2 because the high-energy (100) surface has moderate hydrogen adsorption and desorption capability. This work provides an appealing strategy to engineer the surface structure of bulk metallic materials and improve their catalytic properties.

Regulating the work function of silver catalysts via surface engineering for enhanced CO2 electroreduction.

The work function can serve as a characteristic quantity to evaluate the catalytic activity due to its relationship with the surface structure of a material. However, what factors determine the influence of the work function on the electrochemical performance are still unclear. Herein, we elucidate the effect of the work function of Ag on the electrochemical reduction of CO2 to CO by controlling the ratio of exposed crystalline planes. To this end, the exposed surface of Ag powder was regulated by high-energy ball milling and its influence on CO2 reduction was investigated. The surface structure with more Ag(110) surface achieves higher activity and selectivity for CO production, resulting from the lower work function of Ag(110), which dramatically enhances the electron tunnelling probability during CO2 electroreduction. We found that a higher ratio of Ag(110) to Ag(100) leads to a lower work function and thus better electrochemical activity and selectivity. This study demonstrates a promising strategy to enhance the electrochemical performance of metal catalysts through tuning their work functions via regulating exposed crystalline planes.

Revealing the Dynamics and Roles of Iron Incorporation in Nickel Hydroxide Water Oxidation Catalysts.

The surface of an electrocatalyst undergoes dynamic chemical and structural transformations under electrochemical operating conditions. There is a dynamic exchange of metal cations between the electrocatalyst and electrolyte. Understanding how iron in the electrolyte gets incorporated in the nickel hydroxide electrocatalyst is critical for pinpointing the roles of Fe during water oxidation. Here, we report that iron incorporation and oxygen evolution reaction (OER) are highly coupled, especially at high working potentials. The iron incorporation rate is much higher at OER potentials than that at the OER dormant state (low potentials). At OER potentials, iron incorporation favors electrochemically more reactive edge sites, as visualized by synchrotron X-ray fluorescence microscopy. Using X-ray absorption spectroscopy and density functional theory calculations, we show that Fe incorporation can suppress the oxidation of Ni and enhance the Ni reducibility, leading to improved OER catalytic activity. Our findings provide a holistic approach to understanding and tailoring Fe incorporation dynamics across the electrocatalyst-electrolyte interface, thus controlling catalytic processes.

Valence-State Effect of Iridium Dopant in NiFe(OH)2 Catalyst for Hydrogen Evolution Reaction.

Engineering high-performance electrocatalysts is of great importance for energy conversion and storage. As an efficient strategy, element doping has long been adopted to improve catalytic activity, however, it has not been clarified how the valence state of dopant affects the catalytic mechanism and properties. Herein, it is reported that the valence state of a doping element plays a crucial role in improving catalytic performance. Specifically, in the case of iridium doped nickel-iron layer double hydroxide (NiFe-LDH), trivalent iridium ions (Ir3+ ) can boost hydrogen evolution reaction (HER) more efficiently than tetravalent iridium (Ir4+ ) ions. Ir3+ -doped NiFe-LDH delivers an ultralow overpotential (19 mV @ 10 mA cm-2 ) for HER, which is superior to Ir4+ doped NiFe-LDH (44 mV@10 mA cm-2 ) and even commercial Pt/C catalyst (40 mV@ 10 mA cm-2 ), and reaches the highest level ever reported for NiFe-LDH-based catalysts. Theoretical and experimental analyses reveal that Ir3+ ions donate more electrons to their neighboring O atoms than Ir4+ ions, which facilitates the water dissociation and hydrogen desorption, eventually boosting HER. The same valence-state effect is found for Ru and Pt dopants in NiFe-LDH, implying that chemical valence state should be considered as a common factor in modulating catalytic performance.

Electroreduction of Carbon Dioxide in Metallic Nanopores through a Pincer Mechanism.

Metallic catalysts with nanopores are advantageous on improving both activity and selectivity, while the reason behind that remains unclear all along. In this work, porous Zn nanoparticles (P-Zn) were adopted as a model catalyst to investigate the catalytic behavior of metallic nanopores. In situ X-ray absorption spectroscopy, in situ Fourier transform infrared spectroscopy, and density functional theory (DFT) analyses reveal that the concave surface of nanopores works like a pincer to capture and clamp CO2 and H2 O precursors simultaneously, thus lowering the energy barriers of CO2 electroreduction. Resultantly, the pincer mechanism endows P-Zn with a high Faradic efficiency (98.1 %) towards CO production at the potential of -0.95 V vs. RHE. Moreover, DFT calculation demonstrates that Co and Cu nanopores exhibit the pincer behavior as well, suggesting that this mechanism is universal for metallic nanopores.

A Hydrogen-Deficient Nickel-Cobalt Double Hydroxide for Photocatalytic Overall Water Splitting.

Developing highly efficient and low-cost photocatalysts for overall water splitting has long been a pursuit for converting solar power into clean hydrogen energy. Herein, we demonstrate that a nonstoichiometric nickel-cobalt double hydroxide can achieve overall water splitting by itself upon solar light irradiation, avoiding the consumption of noble-metal co-catalysts. We employed an intensive laser to ablate a NiCo alloy target immersed in alkaline solution, and produced so-called L-NiCo nanosheets with a nonstoichiometric composition and O2- /Co3+ ions exposed on the surface. The nonstoichiometric composition broadens the band gap, while O2- and Co3+ ions boost hydrogen and oxygen evolution, respectively. As such, the photocatalyst achieves a H2 evolution rate of 1.7 µmol h-1 under AM 1.5G sunlight irradiation and an apparent quantum yield (AQE) of 1.38 % at 380 nm.

Porous Copper Microspheres for Selective Production of Multicarbon Fuels via CO2 Electroreduction.

The electroreduction of carbon dioxide (CO2 ) toward high-value fuels can reduce the carbon footprint and store intermittent renewable energy. The iodide-ion-assisted synthesis of porous copper (P-Cu) microspheres with a moderate coordination number of 7.7, which is beneficial for the selective electroreduction of CO2 into multicarbon (C2+ ) chemicals is reported. P-Cu delivers a C2+ Faradaic efficiency of 78 ± 1% at a potential of -1.1 V versus a reversible hydrogen electrode, which is 32% higher than that of the compact Cu counterpart and approaches the record (79%) reported in the same cell configuration. In addition, P-Cu shows good stability without performance loss throughout a continuous operation of 10 h.

Porous Cobalt-Nickel Hydroxide Nanosheets with Active Cobalt Ions for Overall Water Splitting.

Low-cost and high-performance catalysts are of great significance for electrochemical water splitting. Here, it is reported that a laser-synthesized catalyst, porous Co0.75 Ni0.25 (OH)2 nanosheets, is highly active for catalyzing overall water splitting. The porous nanosheets exhibit low overpotentials for hydrogen evolution reaction (95 mV@10 mA cm-2 ) and oxygen evolution reaction (235 mV@10 mA cm-2 ). As both anode and cathode catalysts, the porous nanosheets achieve a current density of 10 mA cm-2 at an external voltage of 1.56 V, which is much lower than that of commercial Ir/C-Pt/C couple (1.62 V). Experimental and theoretical investigations reveal that numerous Co3+ ions are generated on the pore wall of nanosheets, and the unique atomic structure around Co3+ ions leads to appropriate electronic structure and adsorption energy of intermediates, thus accelerating hydrogen and oxygen evolution.

Laser-Prepared CuZn Alloy Catalyst for Selective Electrochemical Reduction of CO2 to Ethylene.

Laser ablation in liquid was used to prepare homogeneous copper-zinc alloy catalysts that exhibited excellent selectivity for C2H4 in CO2 electroreduction, with faradaic efficiency values as high as 33.3% at a potential of -1.1 V (vs reversible hydrogen electrode). The high proximity of Cu and Zn atoms on the surface of the catalyst was found to facilitate both stabilization of the CO* intermediate and its transfer from Zn atoms to their Cu neighbors, where further dimerization and protonation occur to give rise to a large amount of ethylene product. The new homogeneous nanocatalyst, along with the mechanism proposed for its performance, may be very helpful for in-depth understanding of processes related to carbon dioxide electroreduction and conversion.

Localized Defects on Copper Sulfide Surface for Enhanced Plasmon Resonance and Water Splitting.

Surficial defects in semiconductor can induce high density of carriers and cause localized surface plasmon resonance which is prone to light harvesting and energy conversion, while internal defects may cause serious recombination of electrons and holes. Thus, it is significant to precisely control the distribution of defects, although there are few successful examples. Herein, an effective strategy to confine abundant defects within the surface layer of Cu1.94 S nanoflake arrays (NFAs) is reported, leaving a perfect internal structure. The Cu1.94 S NFAs are then applied in photoelectrochemical (PEC) water splitting. As expected, the surficial defects give rise to strong LSPR effect and quick charge separation near the surface; meanwhile, they provide active sites for catalyzing hydrogen evolution. As a result, the NFAs achieve the top PEC properties ever reported for Cux S-based photocathodes.

Photochemical Synthesis of Ultrafine Cubic Boron Nitride Nanoparticles under Ambient Conditions.

Cubic boron nitride (c-BN) is a super-hard material whose hardness increases dramatically with decreasing size. However, c-BN nanoparticles (NPs) with sizes less than 10 nm have never been obtained. Herein we report a simple strategy towards the synthesis of ultrafine c-BN NPs with an average size of 3.5 nm. The method, under ambient conditions, exploits a laser-induced photochemical effect and employs dioxane solution of ammonia borane (AB) as a liquid target. Meanwhile, total dehydrogenation of AB is realized by laser irradiation. Therefore, this approach shows great potential for the preparation of super-hard NPs as well as controllable dehydrogenation.

Controlling interfacial recombination in aqueous dye-sensitized solar cells by octadecyltrichlorosilane surface treatment.

A general and convenient strategy is proposed for enhancing photovoltaic performance of aqueous dye-sensitized solar cells (DSCs) through the surface modification of titania using an organic alkyl silane. Introduction of octadecyltrichlorosilane on the surface of dyed titania photoanode as an organic barrier layer leads to the efficient suppression of electron recombination with oxidized cobalt species by restricting access of the cobalt redox couple to the titania surface. The champion ODTS-treated aqueous DSCs (0.25 mM ODTS in hexane for 5 min) exhibit a V(oc) of 821±4 mV and J(sc) of 10.17±0.21 mA cm(-2), yielding a record PCE of 5.64±0.10%. This surface treatment thus serves as a promising post-dye strategy for improving the photovoltaic performance of other aqueous DSCs.

Construction of Co-Se-W at Interfaces of Phase-Mixed Cobalt Selenide via Spontaneous Phase Transition for Platinum-Like Hydrogen Evolution Activity and Long-Term Durability in Alkaline and Acidic Media.

Cost-effective transition metal chalcogenides are highly promising electrocatalysts for both alkaline and acidic hydrogen evolution reactions (HER). However, unsatisfactory HER kinetics and stability have severely hindered their applications in industrial water electrolysis. Herein, a nanoflowers-shaped W-doped cubic/orthorhombic phase-mixed CoSe2 catalyst ((c/o)-CoSe2-W) is reported. The W doping induces spontaneous phase transition from stable phase cubic CoSe2 (c-CoSe2) to metastable phase orthorhombic CoSe2, which not only enables precise regulation of the ratio of two phases but also realizes W doping at the interfaces of two phases. The (c/o)-CoSe2-W catalyst exhibits a Pt-like HER activity in both alkaline and acidic media, with record-low HER overpotentials of 29.8 mV (alkaline) and 35.9 mV (acidic) at 10 mA cm-2, respectively, surpassing the vast majority of previously reported non-precious metal electrocatalysts for both alkaline and acidic HER. The Pt-like HER activities originate from the formation of Co-Se-W active species on the c-CoSe2 side at the phase interface, which effectively modulates electron structures of active sites, not only enhancing H2O adsorption and dissociation at Co sites but also optimizing H* adsorption to ΔGH* ≈ 0 at W sites. Benefiting from the abundant phase interfaces, the catalyst also displays outstanding long-term durability in both acidic and alkaline media.

A "Two-Pronged" Strategy to Boost Hydrogen Evolution Kinetics on NiFe-Based (Oxy)hydroxides via Oxygen Deficient Ni-Mo-Fe Coordinate Structures for Ultra-Stable Ampere-Level Alkaline Overall Water Splitting.

NiFe (oxy)hydroxides have been regarded as one of the state-of-the-art catalysts for oxygen evolution reaction (OER). Unfortunately, the sluggish hydrogen evolution reaction (HER) kinetics limit its application as bifunctional electrocatalyst for alkaline overall water splitting (OWS). Herein, a "two-pronged" strategy is proposed to construct highly active oxygen deficient Ni-Mo-Fe coordinate structures in NiFe (oxy)hydroxide (NFM-OVR/NF), which simultaneously reduces the energy barrier of Volmer and Heyrovsky steps during alkaline HER process and significantly accelerate the reaction kinetics. Consequently, NFM-OVR/NF delivers overpotentials as low as 25 and 234 mV to achieve 10 and 1000 mA cm-2 in 1.0 M KOH, respectively. Furthermore, benefiting from excellent HER and OER activity, NFM-OVR/NF exhibits a remarkable OWS activity with cell voltages of 1.44 V and 1.77 V at 10 and 1000 mA cm-2 in 1.0 M KOH, and displays ultralong-term stability for 600 h at 500 mA cm-2, while remaining durable for 300 h in an alkaline water electrolyzer in 30% KOH at 80 °C. The calculated price per gallon of gasoline equivalent for the produced H2 is $ 0.92, which is much lower than 2026 U.S. Department of Energy target ($ 2.00), demonstrating feasibility and practicability of NFM-OVR/NF for industrial applications.

Elementary photoelectronic processes at a porphyrin dye/single-walled TiO2 nanotube hetero-interface in dye-sensitized solar cells: a first-principles study.

A unique one-dimensional (1D) sandwich single-walled TiO2 nanotube (STNT) is proposed as a photoanode nanomaterial with perfect morphology and large specific surface area. We have thoroughly examined the elementary photoelectronic processes occurring at the porphyrin dye/STNT hetero-interface in dye-sensitized solar cells (DSSCs) by theoretical simulation. It is desirable to investigate the interfacial photoelectronic processes to elucidate the electron transfer and transport mechanism in 1D STNT-based DSSCs. We have found that the photoexcitation and interfacial charge separation mechanism can be described as follows. A ground-state electron of the dye molecule (localized around the electron donor) is first promoted to the excited state (distributed electron donor), and then undergoes ultrafast injection into the conduction band of the STNT, leaving a hole around the oxidized dye. Significantly, the injected electron in the conduction band is transported along the STNT by means of Ti 3d (x2-y2) orbitals, offering a unidirectional electron pathway toward the electrode for massive collection without the observation of trap states. Our study not only provides theoretical guidelines for the modification of TiO2 nanotubes as a photoanode material, but also opens a new perspective for the development of a novel class of TiO2 nanotubes with high power-generation efficiency.

A Strongly Coupled Ag(S)@NiO/Nickel Foam Electrode Induced by Laser Direct Writing for Hydrogen Evolution at Ultrahigh Current Densities with Long-Term Durability.

Highly active, durable, and cost-effective electrodes for hydrogen evolution reaction (HER) at ultrahigh current densities (≥1 A cm-2 ) are extremely demanded for industrial high-rate hydrogen production, but challenging. Here, a robust strongly coupled Ag(S)@NiO/nickel foam (NF) electrode is reported. Taking advantage of millisecond laser direct writing in liquid nitrogen technique, lattice-matched and coherent interfaces are formed between Ag nanoparticles with stacking faults (denoted by Ag(S)) and NiO nanosheets, leading to strong interfacial electronic coupling, not only promoting H2 O adsorption and dissociation on Ni2+ but also enhancing H* adsorption on intrinsically inactive but most electrically conductive Ag. Strong chemical bonding is established at NiO/NF interface, guaranteeing rapid electron transfer and excellent mechanical durability under high-rate hydrogen evolution. The physicochemically stable electrode achieves record-low alkaline HER overpotential of 167 and 180 mV at 1 and 1.5 A cm-2 , respectively, along with negligible activity decay after 120 h test at ≈1.5 A cm-2 , surpassing reported non-platinum group metal electrocatalysts.