Raman and thermal analysis of indomethacin/PVP solid dispersion enteric microparticles.

Indomethacin (IMC) and three types of poly-(vinylpyrrolidone) (PVP 12PF, PVP K30 and PVP K90) were studied in the form of solid dispersion, prepared with the solvent evaporation method, by spectroscopic (Raman, FT-IR, X-ray diffraction), thermal (differential scanning calorimetry, thermogravimetry, hot-stage microscopy), fractal and image analysis. Raman and FT-IR micro-spectroscopy indicated the occurrence of drug/polymer interaction and the presence of an amorphous form of IMC, as also resulting from X-ray diffractometry. Hot-stage microscopy suggested that the interaction between IMC and the polymer occurring on heating of a physical mixture, is common to other acidic compounds and causes a depression of the temperature of the appearance of a molten phase. Co-evaporated particles were coated by spray-congealing process with molten stearic acid for gastroprotection, but also for stabilization of the amorphous structure of the drug: the final particles were spherically shaped. Dissolution tests carried out on the final microparticles showed that the coating with stearic acid prevents IMC release at acidic pH and also protects against recovery of the IMC crystallinity, at least after 9 months of aging: the extent and mode of the release, before and after aging, overlap perfectly. The test revealed a notable improvement of the drug release rate from the solid dispersion at suitable pH, with respect to pure IMC. The comparison of the present solid dispersion with IMC/PVP (surface) solid dispersion obtained by freeze-drying of an aqueous suspension, where IMC maintained its crystalline state, revealed that there was no difference concerning the release rate, but suggested a superior quality of this last process as a mean of improving IMC availability for the easiness of preparation and stability, due to the absence of the amorphous state of the drug, as a possible instability source of the system. Finally, the coating with stearic acid is discussed as a determining process for the practical application of solid dispersions.

Fast dispersible/slow releasing ibuprofen tablets.

Eight formulations were developed containing ibuprofen in the form of orally disintegrating tablets. To prevent bitter taste and side effects of the drug, the drug was associated with Phospholipon 80H, a saturated lecithin, by wet granulation. The granules were then coated using different film forming agents (Kollicoat SR 30, Amprac 01, Kollidon 90F, Eudragit RD 100) obtaining four lots 1-4. Coated granules were then formulated with a sweetener (Aspartame), a mannitol-based diluent (Pearlitol SD 200) and Kollidon CL (1-4K) or Explotab (1-4E) were added as superdisintegrants and compacted under low compression force. The eight lots of tablets, 1-4K and 1-4E, were assessed if suitable as oral disintegrating tablets by determination of a range of technological parameters. Wetting and disintegregation time matched with the requirements of EP IV Ed., for almost all these formulations. Dissolution profiles suggested that the combined action of the hydrophobic lecithin and the coating delay the release of the drug from tablets with respect to when it is free or in the form of simple granules. By an appropriate combination of excipients it was thus possible to obtain orally disintegrating tablets and a delayed release of ibuprofen using simple and conventional techniques.

Control of transdermal permeation of hydrocortisone acetate from hydrophilic and lipophilic formulations.

The purpose of this research was the preparation of four formulations containing hydrocortisone acetate (HCA) for topical application, including two aqueous systems (hydrophilic microemulsion and aqueous gel) and two systems with dominant hydrophobicity (hydrophobic microemulsion and ointment). The formulations were tested for the release and permeation of HCA across an animal membrane. The release of HCA was found comparable for the four systems. The two microemulsions promote permeation across an ex-vivo membrane, examined by means of a Franz cell. Hydrophobic microemulsion guarantees the highest solubility (2,370 microg/ml) and flux (133 microg/cm(2).h) of the drug, since it contains almost 40% Transcutol, a permeation enhancer. Gel and ointment provide lower solubility and flux, being the values, related to the ointment, the lowest ones (562 microg/ml and 0.4 microg/cm(2).h). Experimental results allow the conclusion that gel and ointment can be suitable when it is desirable to minimize absorption of topically applied HCA as to keep the drug restricted to the diseased area and prevent side effects of the systemic presence of HCA.

Solid state characterization of progesterone in a freeze dried 1:2 progesterone/HPBCD mixture.

Progesterone rapidly dissolves in an aqueous solution containing hydroxypropyl-beta-cyclodextrin (HPBCD) at 1:2 molar ratio, forming a soluble inclusion complex. After filtration and freeze-drying of the final solution, the final powder was examined by SEM, DSC, TGA, XRD, Raman, and FTIR spectroscopy. Experimental results confirm that an inclusion complex exists in the solid state and possible structure of the complex is briefly discussed.

Ex vivo study of transdermal permeation of four diclofenac salts from different vehicles.

The ex vivo permeation of diclofenac was studied using four different salts (sodium, potassium, diethylamine, and epolamine) dissolved in four different solvents (water, propylene glycol (PG), Transcutol, and oleic acid (OA)) as donor phases through a human skin membrane. The four salts show different solubility values and different behavior in the four solvents, which are also permeation enhancers and this fact further is connected to the permeation results. The same order of magnitude of fluxes through the membrane as those previously reported for acidic diclofenac released from buffer solutions of pH >7 were found, taking into account differences originated by different membranes and other parameters tested in the experiments. Saturation concentration for the four salts in different solvents, necessary to calculate permeation coefficients, was critically evaluated; a short discussion made it possible to explain that corrections in the solubility values must be considered, related to the complex behavior in solution of these salts. Statistical processing of the experimental data suggests that differences between the four salts in promoting absorption of the drug is unproven; while differences are evident between the solvents, water is the most effective enhancing vehicle. Aqueous formulations containing diclofenac salt with an organic base appear to be the best combination to promote permeation in topical applications.

Study of the interaction between oxygen and bile salts.

The interaction between molecular oxygen and bile salts, previously observed using chemiluminescence techniques, is studied in this paper by electrochemical techniques to further highlight the nature of the interaction. A shift of half-wave potential of the first polarographic wave for the reduction of molecular oxygen was observed in solutions in the presence of bile salts. The shift could be related to different phenomena, such as adsorption of bile salt molecules on the mercury electrode, irreversibility of the oxygen reduction reaction, pH of the solution. Experimental results suggest the exclusion of the above mentioned processes and outline the occurrence of a direct interaction between oxygen and bile salts, where the hydrophobic face of bile salt monomers and/or small aggregates are involved, enhancing so dismutation of superoxide ion produced at the electrode. The presence of bile salts in solutions containing triphenylphosphine oxide, a hydrophobic surfactant, increases also the wave of reduction of molecular oxygen. As a consequence bile salts, beside the well-assessed physiological roles, can behave as oxygen carrier and as antioxidant, preventing the oxidation of biological compounds by superoxide ion.

Effect of vehicles on topical application of aloe vera and arnica montana components.

In this study two types of gels and microemulsions are investigated for their ability to dissolve, release, and induce the permeation of helenalin, a flavonoid responsible for the anti-inflammatory activity of arnica montana extract, and aloin, an anthrone-C-glucosyls with antibacterial activity present in aloe vera extract. The release of these agents from each vehicle was followed by HPLC, and transcutaneous permeation was examined using a modified Franz cell and a porcine skin membrane. The study showed that a microemulsion can be a good vehicle to increase the permeation of helenalin, while the gel formulation, containing Sepigel 305, proved able to reduce the release and permeation of aloin, with a consequent activity limited to the surface of application, without any permeation. This is in accordance with the necessity to avoid this process, since human skin fibroblasts can metabolize absorbed aloin into a structurally related compound that increases the sensitivity of skin to ultraviolet light.

Release of indomethacin from ultrasound dry granules containing lactose-based excipients.

Physical mixtures were prepared containing indomethacin and beta-lactose and alpha-lactose-based excipients (Ludipress and Cellactose). The mixtures were compacted with the aid of ultrasound, obtaining tablets, which were milled and sieved. Granules thus obtained were examined by optical microscopy and differential scanning calorimetry. The intense yellow color of the granules and the absence of indomethacin peak in thermograms suggest important modifications of indomethacin physical state; the drug thus modified appears to be spread on the excipient particle surface as a thin film, giving a lustrous appearance. No influence of ultrasound was observed on phase transition concerning lactose; only loss of water was important under high energy ultrasound. Dissolution profiles suggest an increased release of the drug from the systems treated with ultrasound at high energy, with respect to a traditional compaction; while no difference could be evidenced among the three excipients that, however, appear all suitable for this ultrasound-aided direct compression process.

Diclofenac salts, II. Solid dispersions in PEG6000 and Gelucire 50/13.

A number of systems were prepared at five compositions (5, 10, 20, 30 and 40% w/w) of diclofenac/N-(2-hydroxyethyl) pyrrolidine salt and acidic diclofenac in PEG6000 and Gelucire 50/13, as physical mixtures and as solid dispersions. Powder X-ray diffractograms for the systems examined show shifted and normal peaks, suggesting that the drug is present inside the samples in different physical states. Differential scanning calorimetry does not offer important information, since drug solubility into the carriers increases with temperature and thermograms show only the melting point peak of the carriers. Hot-stage microscopy examination explains that, in high concentration samples, the drug is present either dissolved into the carriers, or precipitated as microcrystals, or undissolved crystals of larger size. Gelucire 50/13 allows the formation of larger crystals than PEG, using both the chemical forms of the drug. The release percentage of the drug from PEG6000/acidic diclofenac reaches 50% after few minutes in the most favourable case and appears to be dependent on the composition of the samples: the more diclofenac is present as dissolved in the pre-treated samples, the higher is the release. The optimum composition was found in the range of 5-10% w/w.

Thermal and fractal analysis of diclofenac/Gelucire 50/13 microparticles obtained by ultrasound-assisted atomization.

The study describes the application of a spray-congealing technique, using a new ultrasound-assisted atomizer to prepare microparticles of diclofenac/Gelucire 50/13, with the aim to obtain a formulation of enhanced-release, at 10% w/w drug-to-excipient ratio, without any employ of solvent. Scanning electron microscopy showed that it was possible to obtain almost spherically shaped and non-aggregated microparticles; with good encapsulation efficiency (90% in most size fraction) and with a prevalent particle size in the range 150-350 mum. Image analysis results by SEM and the high fractal dimension value suggested that most particles have actually an ellipsoidal shape and a rather rough contour. Hot stage microscopy, differential scanning calorimetry, and X-ray powder diffractometry analysis were carried out to evaluate the nature of the solid state and the thermal behavior of the microparticles thus prepared. The in vitro tests displayed a significant increase of the diclofenac dissolution rate from ultrasound microparticles, compared with pure drug and with drug/Gelucire 50/13 physical mixtures.

Diclofenac salts. III. Alkaline and earth alkaline salts.

Diclofenac salts containing the alkaline and two earth alkaline cations have been prepared and characterized by scanning electron microscopy (SEM) and EDAX spectroscopy; and by thermal and thermogravimetric analysis (TGA): all of them crystallize as hydrate when precipitated from water. The salts dehydrate at room temperature and more easily on heating, but recovery the hydration, when placed in a humid environment. X-ray diffraction spectra suggest that on dehydration new peaks appear on diffractograms and the lattice of the salts partially looses crystallinity. This phenomenon is readily visible in the case of the calcium and magnesium salts, whose thermograms display a crystallization exotherm, before melting or decomposing at temperatures near or above 200 degrees C; these last salts appear to form solvates, when prepared from methanol. The thermogram of each salt shows a complex endotherm of dehydration about 100 degrees C; the calcium salt displays two endotherms, well separated at about 120 and 160 degrees C, which disappear after prolonged heating. Decomposition exotherms, before or soon after the melting, appear below 300 degrees C. The ammonium salt is thermally unstable and, when heated to start dehydration, dissociates and leaves acidic diclofenac.

Interactions between different selenium compounds and zinc, cadmium and mercury.

In this paper, we present a polarographic study of systems containing different inorganic and organic selenium compounds (sodium selenite, sodium selenate, seleno-methionine and seleno-urea) and metal ions (Zn2+, Cd2+ Hg2+) of the 12th group of elements in the periodic table. While zinc is a trace element known to be essential for plants and animals, cadmium and mercury are exogenous elements and are harmful pollutants that accumulate during aging; selenium is also recognized as an important micronutrient and is sometimes added to the diet. Experiments investigating the interactions were carried out using polarographic techniques in unbuffered systems. The three metal cations originated complexes with different strength and solubility in the presence of selenite anions; in the presence of selenate, polarography was not able to detect formation of complexes with these metal ions, at least under the experimental conditions used: a decrease of Hg2+ ion concentration was observed. Seleno-methionine did not react with Cd2+; in the presence of Zn2+, a soluble complex with a co-ordination number 1 was formed, while, again, the concentration of Hg2+ decreased in the presence of increasing concentrations of the selenium derivative. Seleno-urea did not react with Zn2+, but formed a complex with Cd2+ with limited solubility. Finally, this ligand could not be studied with Hg2+ because of the overlapping of the reduction potentials of both the ligand and the metal cation. Overall equilibrium constants for complex formation (Kf) and the solubility product (Ksp) for poorly soluble species are also reported.

Ex-vivoand in-vitro assessment of mucoadhesive patches containing the gel-forming polysaccharide psyllium for buccal delivery of chlorhexidine base.

The aim of the present study was to evaluate the gel-forming polysaccharide psyllium in the preparation of mucoadhesive patches for the controlled release of chlorhexidine (CHX) to treat pathologies in the oral cavity, using the casting-solvent evaporation technique. A number of different film-forming semi-synthetic polymers, such as sodium carboxymethyl cellulose (SCMC) and hydroxypropylmethyl cellulose (HPMC) were evaluated for comparison. The patch formulations were characterized in terms of drug content, morphology surface, swelling and mucoadhesive properties, microbiology inhibition assay and in vitro release tests. Three ex-vivo testswere carried out using porcine mucosa: an alternative dissolution test using artificial saliva that allows contemporary measurement of dissolution and mucoadhesion, a permeation test through the mucosa and the measurement of mucoadhesion using a Nouy tensile tester, as the maximum force required for the separation of the patch from the mucosa surface. The patches were also examined for determination of the minimum inhibitory concentration in cultures of Escherichia coli and Staphylococcus aureus. All the patches incorporating psyllium were found suitable in terms of external morphology, mucoadhesion and controlled release of the drug: in the presence of psyllium the drug displays prolonged zero-order release related to slower swelling rate of the system.

Ultrasound-compacted indomethacin/polyvinylpyrrolidone systems: effect of compaction process on particle morphology and dissolution behavior.

Indomethacin (IMC)/polyvinylpyrrolidone systems were prepared under different technological conditions, using co-evaporation, kneading, traditional, and ultrasound (US) compaction. The materials thus obtained were milled and sieved and the powders were analyzed by using scanning electron microscopy to evaluate the morphology of the final particles and the fractal dimension of the particle contour. In the case of US-treated particles, scanning electron micrographs suggest that IMC could have partially covered the excipient granule surface, which appears lustrous and smooth, whereas after co-evaporation, the particles display a stratified structure. The external color of the granules, the hot stage microscopy examination, and the absence of the melting peak of the drug in thermograms supports the idea that IMC converts into an amorphous form under US discharge. Each technological treatment performed on the binary mixtures increases the dissolution rate of the drug, with respect to the pure drug and the physical mixture, but to a lesser extent than US compaction. US compaction and co-evaporation produce comparable results in improving the release of the drug. Polyvinylpyrrolidone offers better results than beta-cyclodextrin in promoting the dissolution of IMC, when both systems are compacted under US.

Novel cephalosporin derivatives possessing a substituted cinnamoyl moiety at the 7 beta-position. Synthesis, structural characterization and antibacterial activity of 3-acetoxymethyl cephalosporin derivatives.

Twenty 3-acetoxymethyl cephalosporin derivatives, with various cinnamoyl (3-phenyl-2-propenoyl) substituted groups at the 7beta-position, were synthesized and evaluated for antibacterial activity in vitro. Some of these cephalosporin derivatives showed good selective activity against Gram-positive bacteria. Although substitution on the aromatic ring of cinnamoyl moiety generally reduced antimicrobial activity against Staphylococcus sp. and Enterococcus sp., a hydroxy group at the para position, and particularly ortho, para di-chloro substitution, improved the activity against methicillin resistant strains of Staphylococcus aureus (MRSA). Substitution on the double bond alpha position of the cinnamoyl moiety also affected the antimicrobial activity. A cyano group attached to this position increased activity against both negative coagulase Staphylococcus and Enterococcus sp. and extended the antibacterial spectrum towards Gram-negative bacteria.

An improved method for preparation of cefpodoxime proxetil.

Cefpodoxime proxetil, a third-generation cephalosporin for oral administration, was synthesized by a method based on the following sequence of reactions: acylation of 7-aminocephalosporanic acid (7-ACA) with S-benzothiazol-2-yl(2-amino-4-thiazolyl)(methoxyimino)thioacetate (MAEM), chloroacetylation of the cefotaxime formed with chloroacetyl chloride, esterification of the acid function with 1-iodoethyl isopropyl carbonate and final cleavage of chloroacetamide protective group by treatment with thiourea in N,N-dimethylacetamide. The developed procedure allows us to obtain better yields of cefpodoxime proxetil and to eliminate the final purification step by column chromatography, necessary during the synthesis of this antibiotic by the previously reported methods.

An alternative procedure for preparation of cefdinir.

Cefdinir, a broad spectrum third-generation cephalosporin for oral administration, was prepared by the following synthetic pathway: synthesis of diphenylmethyl 7beta-amino-3-vinyl-3-cephem-4-carboxylate hydrochloride from 7-aminocephalosporanic acid (7-ACA), preparation of sodium 2-(2-tritylaminothiazol-4-yl)-(Z)-2-(tritylhydroxyimino) acetate from ethyl acetoacetate, coupling of both intermediaries to obtain diphenylmethyl 7beta-[2-(2-tritylaminothiazol-4-yl)-(Z)-2-tritylhydroxyimino-3-vinyl-3-cephem-4-carboxylate and final cleavage of trityl and diphenylmethyl protective groups. This procedure allows to obtain better yields of cefdinir and to avoid the use of diketene during the synthesis of this antibiotic by the previously reported method.

Image analysis of lutrol/gelucire/olanzapine microspheres prepared by ultrasound-assisted spray congealing.

Nine systems were prepared containing Gelucire 50/13 and various amounts (9-18-36-45% w/w) of Lutrol F68 and F127 in the presence and in the absence of 10% w/w of olanzapine and formulated as a solid dispersion in the form of microspheres by ultrasound (US)-assisted spray congealing. Thermal analysis, using differential scanning calorimetry (DSC) and thermomicroscopy (HSM), suggested the presence of particles of reduced size of olanzapine precipitated inside the microspheres. The microspheres were also studied by means of electron microscopy (SEM) for their shape and aspect, by some image analysis parameters (fractal dimension) and using Energy-dispersive X-ray (X-EDS) and micro-Raman spectroscopy to qualitatively evaluate the composition of different points of the surface. The surface of the microspheres displayed a non-homogeneous distribution of the drug by the presence of wart-like protuberances, whose number increases as the Lutrol content of the systems increases. The same systems in the absence of US, obtained after cooling the molten mixtures, lack these structures and only a very few of them can be found. The blooming of the surface was hypothesized as related to crystallization or phase de-mixing or lipid component diffusion of the carrier mixture inside the cooling mass subjected to ultrasound vibration. Ultrasounds accelerate the physical changes concerning carriers and drug, outlining the importance of ultrasound to achieve stability for formulations of this type. The microspheres de-aggregate on contact with the dissolution medium and release the drug with a bimodal mode according to the Lutrol content.

Mucoadhesive multiparticulate patch for the intrabuccal controlled delivery of lidocaine.

The aim of the present study was to prepare and evaluate patches for the controlled release of lidocaine in the oral cavity. Mucoadhesive buccal patches, containing 8 mg/cm(2) lidocaine base, were formulated and developed by solvent casting method technique, using a number of different bio-adhesive and film-forming semi-synthetic and synthetic polymers (Carbopol, Poloxamer, different type Methocel) and plasticizers (PEG 400, triethyl citrate); the patches were evaluated for bioadhesion, in vitro drug release and permeation using a modified Franz diffusion cell. A lidocaine/Compritol solid dispersion in the form of microspheres, embedded inside the patch, alone or together with free lidocaine, was also examined to prolong the drug release. The effects of the composition were evaluated considering a number of technological parameters and the release of the drug. All the formulations tested offer a variety of drug release mechanisms, obtaining a quick or delayed or prolonged anesthetic local activity with simple changes of the formulation parameters.

Design of olanzapine/lutrol solid dispersions of improved stability and performances.

Eleven solid dispersions containing olanzapine, with carriers of different composition (Lutrol® F68, Lutrol® F127, Gelucire® 44/14), were prepared and examined by thermal (differential scanning calorimetry (DSC); thermomicroscopy (HSM)) and X-ray diffraction (XRD) analysis, both as fresh or aged (one year) samples. Drug and carriers were preliminarily selected in order to avoid problems related to the aging of the formulation, according to the solubility parameters of carriers and drug. These parameters make it possible to predict the low solubility of olanzapine in the carriers (alone or in mixtures). Systems containing only Lutrol (also in the presence of Transcutol®) contain the drug in the form of particles of reduced size and in a crystalline form. Gelucire® 44/14 apparently increases the amount of olanzapine dissolved in the solid carrier, but this is presumed to be a metastable state, probably related to the heterogeneous nature of the carrier that delays crystallization of the drug. The high hydrophilicity of the carriers proves suitable to an accelerated and quick release of the drug regardless of aging. Differences in the release profiles between Lutrol- and Gelucire-containing systems were interpreted in terms of the formation of polymer micelles by the Lutrols when in aqueous solution.