18 F-Fluorination of a supported 2-(aryl-di-tert-butylsilyl)-N-methyl-imidazole for indirect 18 F-labeling of a VH H single-variable domain.

Anchoring an imidazole-di-tert-butyl-arylsilane possessing an azido group to a polystyrene resin provided a heterogeneous precursor that was radiolabeled easily using aqueous [18 F]fluoride. After optimizing the conditions (i.e., using DMSO as solvent and heating at 160°C for 15 min), the desired [18 F]fluorosilane was obtained in 24% radiochemical yield (RCY) and 78% radiochemical purity (RCP) using solid-phase extraction as sole purification. Then, this compound was conjugated by strain-promoted alkyne-azide cycloaddition to a model single-variable domain possessing a cyclooctyne tag, yielding to the desired 18 F-labeled bioconjugate in 2% RCY and >95% RCP after purification by a size exclusion chromatography.

The Metallocene Battery: Ultrafast Electron Transfer Self Exchange Rate Accompanied by a Harmonic Height Breathing.

The first all-metallocene rechargeable battery consisting of poly-cobaltocenium/- and poly-ferrocene/reduced graphene oxide composites as anode and cathode was prepared. The intrinsically fast ET self-exchange rate of metallocenes was successfully combined with an efficient ion-percolation achieved by molecular self-assembly. The resulting battery materials show ideal Nernstian behavior, is thickness scalable up to >1.2 C cm-2 , and exhibit high coulombic efficiency at ultrafast rates (200 A g-1 ). Using aqueous LiClO4 , the charge is carried exclusively by the anion. The ClO4 - intercalation is accompanied by a reciprocal height change of the active layers. Principally, volume changes in organic battery materials during charging/discharging are not desirable and represent a major safety issue. However, here, the individual height changes-due to ion breathing-are reciprocal and thus prohibiting any internal pressure build-up in the closed-cell, leading to excellent cycling stability.

Synthesis, characterization and bio-functionalization of magnetic nanoparticles to improve the diagnosis of tuberculosis.

Mycobacterium tuberculosis is the cause of one of the diseases with the highest mortality and morbidity rate in the Americas and in the world. In developing countries, the diagnosis of tuberculosis (TB) is based on baciloscopy and bacteriological cultures. The first method has a low sensitivity, and the second can take several weeks to reach a confirmatory diagnosis. The lack of a rapid diagnosis compromises the efforts to control this disease and favors the transmission of tuberculosis to the susceptible population. In this work, we present the synthesis, amine-silanization, characterization and bio-functionalization of magnetic nanoparticles (MNPs) to develop a sandwich ELISA to detect and concentrate antigens from M. tuberculosis. For this purpose, a recombinant mycobacterial heat shock protein Hsp16.3, which contributes to the persistence of TB, was cloned and expressed in the E. coli system. Polyclonal antibodies anti-Hsp16.3 were produced in a rabbit and in mice. Magnetic nanoparticles were synthesized by co-precipitation, amine-functionalized and characterized by several physical-chemical methods. The XRD, Mossbauer spectroscopy, zeta potential, TEM, and FTIR all proved the successful preparation of the MNPs showing a diffraction crystal diameter of 10.48 ± 2.56 nm, superficial net charge of [Formula: see text]: +23.57 ± 2.87 mV, characteristic patterns of magnetite and a structure similar to a sphere. Additionally, it showed a magnetization saturation of 37.06 emu.g-1. For the functionalization of nanoparticle surfaces with anti-Hsp16.3, the active ester method was used for bond formation, and parameters such as time of incubation, coupling agents ratio (EDC/NHS) and concentration as well as surface saturation level of amine-silanized MNPs (MNP@Si@NH2) were standardized. Finally, bio-functionalized MNPs were used to detect, fix and concentrate the recombinant antigen Hsp16.3 from M. tuberculosis in a sandwich ELISA-MNP assay.

Highly Selective and Sharp Volcano-type Synergistic Ni2Pt@ZIF-8-Catalyzed Hydrogen Evolution from Ammonia Borane Hydrolysis.

Ammonia borane hydrolysis is considered as a potential means of safe and fast method of H2 production if it is efficiently catalyzed. Here a series of nearly monodispersed alloyed bimetallic nanoparticle catalysts are introduced, optimized among transition metals, and found to be extremely efficient and highly selective with sharp positive synergy between 2/3 Ni and 1/3 Pt embedded inside a zeolitic imidazolate framework (ZIF-8) support. These catalysts are much more efficient for H2 release than either Ni or Pt analogues alone on this support, and for instance the best catalyst Ni2Pt@ZiF-8 achieves a TOF of 600 molH2·molcatal-1·min-1 and 2222 molH2·molPt-1·min-1 under ambient conditions, which overtakes performances of previous Pt-base catalysts. The presence of NaOH boosts H2 evolution that becomes 87 times faster than in its absence with Ni2Pt@ZiF-8, whereas NaOH decreases H2 evolution on the related Pt@ZiF-8 catalyst. The ZIF-8 support appears outstanding and much more efficient than other supports including graphene oxide, active carbon and SBA-15 with these nanoparticles. Mechanistic studies especially involving kinetic isotope effects using D2O show that cleavage by oxidative addition of an O-H bond of water onto the catalyst surface is the rate-determining step of this reaction. The remarkable catalyst activity of Ni2Pt@ZiF-8 has been exploited for successful tandem catalytic hydrogenation reactions using ammonia borane as H2 source. In conclusion the selective and remarkable synergy disclosed here together with the mechanistic results should allow significant progress in catalyst design toward convenient H2 generation from hydrogen-rich substrates in the close future.

Electron- and Hydride-Reservoir Organometallics as Precursors of Catalytically Efficient Transition Metal Nanoparticles in Water.

Nanoparticles (NPs) are actively investigated for their efficient use in catalysis, but their means of synthesis is a key factor influencing their catalytic properties owing to surface coverage with byproducts. Here, neutral electron- and hydride-rich late transition metal organometallics are compared for the synthesis of late transition metal NPs in the presence of poly(vinylpirolidone) (PVP). In particular, the effect of electron-reservoir donors, hydride-reservoir donors, and electron-rich dimers yielding NPs electrostatically stabilized by cationic organometallics are compared in terms of NP size and catalytic efficiency. The catalytic reactions scrutinized with excellent results include 4-nitrophenol reduction to 4-aminophenol by NaBH4 for the AuNPs and PdNPs, and Suzuki-Miyaura reactions for the PdNPs. The nature of the reductant has more influence on the NP size in the case of AuNPs than PdNPs, and the best NP catalysts are obtained with hydride-reservoir complexes as reductants. The less bulky hydride donors are superior, with the complex [CoCp(ŋ4 -C5 H6 )] (Cp=ŋ5 -C5 H5 ) giving the NPs with the best catalyst efficiencies for both reactions. Protection of the NP cores by the organometallic sandwich salt is found to be the key to catalytic efficiency.

Last-Step Pd-Mediated [11C]CO Labeling of a Moxestrol-Conjugated o-Iodobenzyl Alcohol: From Model Experiments to in Vivo Positron Emission Tomography Studies.

The fast, efficient, and functional group tolerant last-step radiolabeling of bioconjugates is crucial for positron emission tomography (PET) applications. In this context, o-iodobenzyl alcohol based structures were identified as ideal tags for an easy Pd-catalyzed carbonylation after bioconjugation, and a moxestrol-conjugated precursor was chosen as the model compound for the further studies. Despite scale and time constraints, conditions developed with [12C]CO and [13C]CO were easily transferred to the 11C isotope, and the desired radioactive product was obtained in amounts up to 740 MBq with radiochemical purities higher than 99%. Radio-high-performance liquid chromatography analyses of rat blood samples demonstrated excellent in vivo stability within the time of the acquisition. MicroPET-magnetic resonance imaging showed excretion pathways similar to moxestrol, and molecular modeling was also performed to evaluate the potential ability of this conjugate to bind estrogen receptors α. Thus, being both synthetically and biologically suitable, this strategy clears the path to potential novel biotracers for preclinical PET imaging.

Isolation, characterization, and determination of a new compound in red wine.

Chromatographic separation using fluorescence as a detection mode revealed, besides a series of flavan-3-ols, the recurrent presence of an undefined compound in Bordeaux red wine. Its isolation and structure characterization by complementary means (high-resolution mass spectrometry, nuclear magnetic resonance, and chemical synthesis) has permitted us to identify it as the nitrogen-containing glycoconjugate 3-indolyl-(2R)-O-ß-D-glucosyl-lactic acid. Its quantification was performed for different wines of different vine varieties and terroirs with the aim to assess whether this compound may be used as a terroir, variety, or wine process tag.

Chelation-assisted cross-coupling of anilines through in situ activation as diazonium salts with boronic acids under ligand-, base-, and salt-free conditions.

We describe the coupling of anilines with aryl boronic acids, under ligand-, base-, and salt-free conditions at room temperature. This new reaction proceeds through the formation of an aryl palladium alkoxo complex, which allows the transmetalation step with aryl boronic acids without any external base. Importantly, this sustainable procedure generates only environmentally friendly byproducts such as tBuOH, H2O, N2, and B(OH)3. The reaction mechanism has been deeply investigated through experimental and theoretical studies.

Stabilisation of carbon-supported palladium nanoparticles through the formation of an alloy with gold: application to the Sonogashira reaction.

Oh my Gold! Gold atoms stabilise catalytically active palladium nanoparticles when engaged in an alloy heterogenised on carbon. The increased durability makes the Pd-Au/C catalyst more recyclable than the gold-free Pd/C catalyst for the Sonogashira reaction.

Pd(0)-Catalyzed methyl transfer on nucleosides and oligonucleotides, envisaged as a PET tracer.

The methyl transfer reaction from activated monomethyltin, via a modified Stille coupling reaction, was studied under "ligandless" conditions on fully deprotected 5'-modified nucleosides and one dinucleotide. The reaction was optimized to proceed in a few minutes and quantitative yield, even under dilute conditions, thus affording a rapid and efficient new method for oligonucleotide labelling with carbon-11.

Practical synthesis of indoles and benzofurans in water using a heterogeneous bimetallic catalyst.

This paper describes the preparation of indoles, azaindoles and benzofurans in pure water by using a new heterogeneous Pd-Cu/C catalyst through a cascade Sonogashira alkynylation-cyclization sequence. Details of the optimization studies and the substrate scope are discussed. This procedure allows the preparation of heterocycles with good yields and is tolerant to a wide variety of functional groups.

Ex Situ Generation of 18O2 and 17O2 from Endoperoxides for *O-Labeling and Mechanistic Studies of Oxidations by Dioxygen.

Near-stoichiometric amounts of 18O2 and 17O2 were generated ex situ from endoperoxides in a two-chamber glassware to oxidize various substrates. This strategy gave [*O2]endoperoxides, [*O1]quinones, [*O1]phenols, and [*Ox]artemisin in moderate to good yields and high isotopic enrichments (up to 84%) at affordable costs. Moreover, mass spectrometry and 17O NMR of the [*O]products provided valuable information about the chemical mechanisms involved.

Sustainable Heck-Matsuda reaction with catalytic amounts of diazonium salts: an experimental and theoretical study.

The palladium-catalyzed Heck-Matsuda reaction with a catalytic amount of an in-situ-generated diazonium salt proceeded under mild and sustainable conditions. The reaction proceeded at room temperature, under base-free conditions, and only generated tBuOH, H(2)O, and N(2) as by-products. Ortho-substituted diazonium salts were more-efficiently coupled to methyl acrylate than their corresponding para isomers, which required the addition of anisole as an additive. In support of these experimental data, we carried out theoretical studies to gain a deeper understanding of these reaction outcomes.

The colloidal state of tannins impacts the nature of their interaction with proteins: the case of salivary proline-rich protein/procyanidins binding.

While the definition of tannins has been historically associated with its propensity to bind proteins in a nonspecific way, it is now admitted that specific interaction also occurs. The case of the astringency perception is a good example to illustrate this phenomenon: astringency is commonly described as a tactile sensation induced by the precipitation of a complex composed of proline-rich proteins present in the human saliva and tannins present in beverages such as tea or red wines. In the present work, the interactions between a human saliva protein segment and three different procyanidins (B1, B3, and C2) were investigated at the atomic level by NMR and molecular dynamics. The data provided evidence for (i) an increase in affinity compared to shortest human saliva peptides, which is accounted for by protein "wraping around" the tannin, (ii) a specificity in the interaction below tannin critical micelle concentration (CMC) of ca. 10 mM, with an affinity scale such that C2 > B1 > B3, and (iii) a nonspecific binding above tannin CMC that conducts irremediably to the precipitation of the tannins/protein complex. Such physicochemical findings describe in accurate terms saliva protein-tannin interactions and provide support for a more subtle description by oenologists of wine astringency perception in the mouth.

Last-step 18F-fluorination of supported 2-(aryl-di-tert-butylsilyl)-N-methyl-imidazole conjugates for applications in positron emission tomography.

Aiming for potential applications in positron emission tomography, fully automated productions of 18F-labelled bioconjugates were achieved using heterogenous precursors obtained by anchoring imidazole-di-tert-butyl-arylsilanes to a polystyrene resin. The reactions were performed using either "batch" or "flow" procedures, avoiding both the time-consuming azeotropic drying and HPLC purifications usually required.

Biorecognition and detection of antigens from Mycobacterium tuberculosis using a sandwich ELISA associated with magnetic nanoparticles.

Tuberculosis (TB), caused by Mycobacterium tuberculosis (MTB), is one of the 10 leading causes of death worldwide, especially in low-income areas. A rapid, low-cost diagnostic assay for TB with high sensitivity and specificity is not currently available. Bio-functionalized magnetic nanoparticles (MNPs) which are able to efficiently detect and concentrate biomolecules from complex biological samples, allows improving the diagnostic immunoassays. In this way, a proof-of-concept of MNP-based sandwich immunoassay was developed to detect various MTB protein antigens. The superficial and secretory antigenic proteins considered in this research were: CFP10, ESAT6, MTC28, MPT64, 38 kDa protein, Ag85B, and MoeX. The proteins were cloned and expressed in an E. coli system. Polyclonal antibodies (ab) against the recombinant antigens were elicited in rabbits and mice. Antibodies were immobilized on the surface of amine-silanized nanoparticles (MNP@Si). The functionalized MNP@Si@ab were tested in a colorimetric sandwich enzyme-linked immunosorbent assay (sELISA-MNP@Si@ab) to recognize the selected antigens in sputum samples. The selected MTB antigens were successfully detected in sputum from TB patients in a shorter time (~ 4 h) using the sELISA-MNP@Si@ab, compared to the conventional sELISA (~15 h) standardized in home. Moreover, the sELISA-MNP@Si@ab showed the higher sensitivity in the real biological samples from infected patients.

Silicon-based chemistry: an original and efficient one-step approach to [18F]-nucleosides and [18F]-oligonucleotides for PET imaging.

Take it eaSi! Nucleosides, dinucleotides, and one oligonucleotide, all modified by click chemistry, have for the first time been directly and very efficiently labeled with (18)F by using a silicon-based, one-step approach that opens the way for the development of a new class of positron emission tomography (PET) tracers (see graphic).

NMR and molecular modeling of wine tannins binding to saliva proteins: revisiting astringency from molecular and colloidal prospects.

In organoleptic science, the association of tannins to saliva proteins leads to the poorly understood phenomenon of astringency. To decipher this interaction at molecular and colloidal levels, the binding of 4 procyanidin dimers (B1-4) and 1 trimer (C2) to a human saliva proline-rich peptide, IB7(14), was studied. Interactions have been characterized by measuring dissociation constants, sizes of complexes, number, and nature of binding sites using NMR (chemical shift variations, diffusion-ordered spectroscopy, and saturation transfer diffusion). The binding sites were identified using molecular mechanics, and the hydrophilic/hydrophobic nature of the interactions was resolved by calculating the molecular lipophilicity potential within the complexes. The following comprehensive scheme can be proposed: 1) below the tannin critical micelle concentration (CMC), interaction is specific, and the procyanidin anchorage always occurs on the same three IB7(14) sites. The tannin 3-dimensional structure plays a key role in the binding force and in the tannin's ability to act as a bidentate ligand: tannins adopting an extended conformation exhibit higher affinity toward protein and initiate the formation of a network. 2) Above the CMC, after the first specific hydrophilic interaction has taken place, a random hydrophobic stacking occurs between tannins and proteins. The whole process is discussed in the general frame of wine tannins eliciting astringency.

New strategies to study the chemical nature of wine oligomeric procyanidins.

Tannins represent a key element in red wine flavors, so researchers have made a lot of effort to try to understand the role of their structure in wine taste in recent decades. We report some new routes to achieve a true structure-taste relationship for the major tannins found in wine, which are procyanidins in their monomeric or oligomeric state. All these routes use synthetic standards. New advances in their synthesis and their analyses using chromatographic methods, NMR spectroscopy, and mass spectrometry to obtain more precise information about their chemical structure, including their stereochemistry and their precise degree of polymerization and galloylation, are described.

Towards a molecular interpretation of astringency: synthesis, 3D structure, colloidal state, and human saliva protein recognition of procyanidins.

Astringency is a sensation in the mouth used in judging the quality of red wine. The rough, dry, and puckering sensation called astringency is the result of an interaction between tannins and saliva proteins, mainly proline-rich proteins (PRP), which leads to the formation and precipitation of a complex. A dry and rough sensation is then perceived in the mouth. To get an insight into astringency at the molecular level we investigated: (i) An efficient and iterative method for 4-8 procyanidin synthesis, which gives rise to all possible 4-8 procyanidins up to the tetramer with total control of degree of oligomerization and stereochemistry. (ii) The 3D-structural preferences, which take into account their internal movements, using 2D NMR and molecular modeling. (iii) The self-association process in water or hydroalcoholic solutions using diffusion NMR spectroscopy that gives the active proportion of tannins able to fix proteins. (iv) A comprehensive description of the PRP-procyanidin complex formation to get information about stoichiometry, binding site localization, and affinity constants for different procyanidins. The data collected suggest that the interactions are controlled by both procyanidin conformational and colloidal state preferences. All these results provide new insights into the molecular interpretation of tannin astringency.