RESUMEN
Many heterogeneous chemical reactions involve gases catalyzed over solid surfaces at elevated temperatures and play a critical role in the production of energy, healthcare, pollution control, industrial products, and food. These catalytic reactions take place at the atomic level, with active structures forming under reaction conditions. A fundamental understanding of catalysis at the single atom resolution is therefore a major advance in a rational framework upon which future catalytic processes can be built. Visualization and analysis of gas-catalyst chemical reactions at the atomic level under controlled reaction conditions are key to understanding the catalyst structural evolution and atomic scale reaction mechanisms crucial to the performance and the development of improved catalysts and chemical processes. Increasingly, dynamic single atoms and atom clusters are believed to lead to enhanced catalyst performance, but despite considerable efforts, reaction mechanisms at the single atom level under reaction conditions of gas and temperature are not well understood. The development of the atomic lattice resolution environmental transmission electron microscope (ETEM) by the authors is widely used to visualize gas-solid catalyst reactions at this atomic level. It has recently been advanced to the environmental scanning TEM (ESTEM) with single atom resolution and full analytical capabilities. The ESTEM employs high-angle annular dark-field imaging where intensity is approximately proportional to the square of the atomic number (Z). In this Account, we highlight the ESTEM development also introduced by the authors for real time in situ studies to reliably discern metal atoms on lighter supports in gas and high temperature environments, evolving oxide/metal interfaces, and atomic level reaction mechanisms in heterogeneous catalysts more generally and informatively, with utilizing the wider body of literature. The highlights include platinum/carbon systems of interest in fuel cells to meet energy demands and reduce environmental pollution, in reduction/oxidation (redox) mechanisms of copper and nickel nanoparticles extensively employed in catalysis, electronics, and sensors, and in the activation of supported cobalt catalysts in Fischer-Tropsch (FT) synthesis to produce fuels. By following the dynamic reduction process at operating temperature, we investigate Pt atom migrations from irregular nanoparticles in a carbon supported platinum catalyst and the resulting faceting. We outline the factors that govern the mechanism involved, with the discovery of single atom interactions which indicate that a primary role of the nanoparticles is to act as reservoirs of low coordination atoms and clusters. This has important implications in supported nanoparticle catalysis and nanoparticle science. In copper and nickel systems, we track the oxidation front at the atomic level as it proceeds across a nanoparticle, by directly monitoring Z-contrast changes with time and temperature. Regeneration of deactivated catalysts is key to prolong catalyst life. We discuss and review analyses of dynamic redox cycles for the redispersion of nickel nanoparticles with single atom resolution. In the FT process, pretreatment of practical cobalt/silica catalysts reveals higher low-coordination Co0 active sites for CO adsorption. Collectively, the ESTEM findings generate structural insights into catalyst dynamics important in the development of efficient catalysts and processes.
RESUMEN
Supported Pt nanoparticles are used extensively in chemical processes, including for fuel cells, fuels, pollution control and hydrogenation reactions. Atomic-level deactivation mechanisms play a critical role in the loss of performance. In this original research paper, we introduce real-time in-situ visualization and quantitative analysis of dynamic atom-by-atom sintering and stability of model Pt nanoparticles on a carbon support, under controlled chemical reaction conditions of temperature and continuously flowing gas. We use a novel environmental scanning transmission electron microscope with single-atom resolution, to understand the mechanisms. Our results track the areal density of dynamic single atoms on the support between nanoparticles and attached to them; both as migrating species in performance degradation and as potential new independent active species. We demonstrate that the decay of smaller nanoparticles is initiated by a local lack of single atoms; while a post decay increase in single-atom density suggests anchoring sites on the substrate before aggregation to larger particles. The analyses reveal a relationship between the density and mobility of single atoms, particle sizes and their nature in the immediate neighbourhood. The results are combined with practical catalysts important in technological processes. The findings illustrate the complex nature of sintering and deactivation. They are used to generate new fundamental insights into nanoparticle sintering dynamics at the single-atom level, important in the development of efficient supported nanoparticle systems for improved chemical processes and novel single-atom catalysis. This article is part of a discussion meeting issue 'Dynamic in situ microscopy relating structure and function'.
RESUMEN
Progress is reported in analytical in situ environmental scanning transmission electron microscopy (ESTEM) for visualizing and analysing in real-time dynamic gas-solid catalyst reactions at the single-atom level under controlled reaction conditions of gas environment and temperature. The recent development of the ESTEM advances the capability of the established ETEM with the detection of fundamental single atoms, and the associated atomic structure of selected solid-state heterogeneous catalysts, in catalytic reactions in their working state. The new data provide improved understanding of dynamic atomic processes and reaction mechanisms, in activity and deactivation, at the fundamental level; and in the chemistry underpinning important technological processes. The benefits of atomic resolution-E(S)TEM to science and technology include new knowledge leading to improved technological processes, reductions in energy requirements and better management of environmental waste. This article is part of a discussion meeting issue 'Dynamic in situ microscopy relating structure and function'.
RESUMEN
Atomic-scale relaxations of platinum nanoparticles (Pt NPs) for fuel-cell catalysts are evaluated by spherical-aberration corrected environmental transmission electron microscopy (ETEM) under reference high-vacuum and N2 atmospheres, and then under reactive H2, CO and O2 atmospheres, combined with ex situ durability test using an electrochemical half-cell. In high-vacuum, increasing roughness due to continuous relaxation of surface-adsorbed Pt atoms is quantified in real-space. Under H2 and N2 atmospheres at a critical partial pressure of 1 × 10-2 Pa the stability of the surface facets is for the first time found to be improved. The adsorption behaviour of CO molecules is investigated using experimentally measured Pt-Pt bond lengths on the topmost surface layer of Pt NPs. The deactivation of Pt NPs in the anode environment of a proton-exchange-membrane fuel-cell is demonstrated at the atomic-scale in the ETEM, and the transformation of NPs into disordered nanoclusters is systematically quantified using the partial size distribution of Pt atomic clusters under controlled heating experiments at 423, 573 and 723 K.
RESUMEN
Understanding the oxidation and reduction mechanisms of catalytically active transition metal nanoparticles is important to improve their application in a variety of chemical processes. In nanocatalysis the nanoparticles can undergo oxidation or reduction in situ, and thus the redox species are not what are observed before and after reactions. We have used the novel environmental scanning transmission electron microscope (ESTEM) with 0.1 nm resolution in systematic studies of complex dynamic oxidation and reduction mechanisms of copper nanoparticles. The oxidation of copper has previously been reported to be dependent on its crystallography and its interaction with the substrate. By following the dynamic oxidation process in situ in real time with high-angle annular dark-field imaging in the ESTEM, we use conditions ideal to track the oxidation front as it progresses across a copper nanoparticle by following the changes in the atomic number (Z) contrast with time. The oxidation occurs via the nucleation of the oxide phase (Cu2O) from one area of the nanoparticle which then progresses unidirectionally across the particle, with the Cu-to-Cu2O interface having a relationship of Cu{111}//Cu2O{111}. The oxidation kinetics are related to the temperature and oxygen pressure. When the process is reversed in hydrogen, the reduction process is observed to be similar to the oxidation, with the same crystallographic relationship between the two phases. The dynamic observations provide unique insights into redox mechanisms which are important to understanding and controlling the oxidation and reduction of copper-based nanoparticles.
RESUMEN
Using a method that combines experimental and simulated Aberration-Corrected High Resolution Electron Microscopy images with digital image processing and structure modeling, strain distribution maps within gold nanoparticles relevant to real powder type catalysts, i.e., smaller than 3 nm, and supported on a ceria-based mixed oxide have been determined. The influence of the reduction state of the support and particle size has been examined. In this respect, it has been proven that reduction even at low temperatures induces a much larger compressive strain on the first {111} planes at the interface. This increase in compression fully explains, in accordance with previous DFT calculations, the loss of CO adsorption capacity of the interface area previously reported for Au supported on ceria-based oxides.
RESUMEN
The gas injection line of the latest spherical aberration-corrected environmental transmission electron microscope has been modified for achieving real-time/atomic-scale observations in moisturised gas atmospheres for the first time. The newly developed Wet-TEM system is applied to platinum carbon electrode catalysts to investigate the effect of water molecules on the platinum/carbon interface during deactivation processes such as sintering and corrosion. Dynamic in situ movies obtained in dry and 24% moisturised nitrogen environments visualize the rapid rotation, migration and agglomeration of platinum nanoparticles due to the physical adsorption of water and the hydroxylation of the carbon surface. The origin of the long-interconnected aggregation of platinum nanoparticles was discovered to be a major deactivation process in addition to conventional carbon corrosion.
RESUMEN
Many industrial chemical processes, including for producing fuels, foods, pharmaceuticals, chemicals and environmental controls, employ heterogeneous solid state catalysts at elevated temperatures in gas or liquid environments. Dynamic reactions at the atomic level play a critical role in catalyst stability and functionality. In situ visualization and analysis of atomic-scale processes in real time under controlled reaction environments can provide important insights into practical frameworks to improve catalytic processes and materials. This review focuses on innovative real time in situ electron microscopy (EM) methods, including recent progress in analytical in situ environmental (scanning) transmission EM (E(STEM), incorporating environmental scanning TEM (ESTEM) and environmental transmission EM (ETEM), with single atom resolution for visualizing and analysing dynamic single atom catalysis under controlled flowing gas reaction environments. ESTEM studies of single atom dynamics of reactions, and of sintering deactivation, contribute to a better-informed understanding of the yield and stability of catalyst operations. Advances in in situ technologies, including gas and liquid sample holders, nanotomography, and higher voltages, as well as challenges and opportunities in tracking reacting atoms, are highlighted. The findings show that the understanding and application of fundamental processes in catalysis can be improved, with valuable economic, environmental, and societal benefits.
RESUMEN
A new mechanism for reactivity of multiply twinned gold nanoparticles resulting from their inherently strained structure provides a further explanation of the surprising catalytic activity of small gold nanoparticles. Atomic defect structural studies of surface strains and quantitative analysis of atomic column displacements in the decahedral structure observed by aberration corrected transmission electron microscopy reveal an average expansion of surface nearest neighbor distances of 5.6%, with many strained by more than 10%. Density functional theory calculations of the resulting modified gold d-band states predict significantly enhanced activity for carbon monoxide oxidation. The new insights have important implications for the applications of nanoparticles in chemical process technology, including for heterogeneous catalysis.
RESUMEN
The oxidation of solution-synthesized iron (Fe) and iron carbide (Fe2C) nanoparticles was studied in an environmental scanning transmission electron microscope (ESTEM) at elevated temperatures under oxygen gas. The nanoparticles studied had a native oxide shell present, that formed after synthesis, an ~3 nm iron oxide (FexOy) shell for the Fe nanoparticles and ~2 nm for the Fe2C nanoparticles, with small void areas seen in several places between the core and shell for the Fe and an ~0.8 nm space between the core and shell for the Fe2C. The iron nanoparticles oxidized asymmetrically, with voids on the borders between the Fe core and FexOy shell increasing in size until the void coalesced, and finally the Fe core disappeared. In comparison, the oxidation of the Fe2C progressed symmetrically, with the core shrinking in the center and the outer oxide shell growing until the iron carbide had fully disappeared. Small bridges of iron oxide formed during oxidation, indicating that the Fe transitioned to the oxide shell surface across the channels, while leaving the carbon behind in the hollow core. The carbon in the carbide is hypothesized to suppress the formation of larger crystallites of iron oxide during oxidation, and alter the diffusion rates of the Fe and O during the reaction, which explains the lower sensitivity to oxidation of the Fe2C nanoparticles.
RESUMEN
Various porous titania photocatalysts are analyzed three-dimensionally in real space by electron tomography. Shapes and three-dimensional (3D) distributions of fine pores and silver (Ag) particles (2 nm in diameter) within the pores are successfully reconstructed from the 3D data. Electron tomography is applied for measuring the specific surface area of the porous structures including open and closed porosity. Calculated specific surface areas of 22.8 m(2)/g for a conventional sol-gel TiO(2) sample and 366 m(2)/g for a highly porous TiO(2) sample prepared using the Pluronic P-123 self-assembly process are compared with those measured by the general BET method. The real-space surface measurement indicates that the highly porous TiO(2) produced by the present method using block copolymers has a greater number of effective reaction sites for the degradation of methylene blue. Electron tomography shows a great potential to contribute considerably to the nanostructural analysis and design of such catalyst materials for photocatalysis.
RESUMEN
We report the development of technologically important nickel (Ni) nanodots (nanoparticles) dispersed in amorphous silica (SiO2) for high-temperature permselectivity for hydrogen separation membranes, crucial in hydrocarbon reactions and H(2) production, and present the systematic reconstruction of the three-dimensional (3D) structures of the nanodots using electron nano-tomography. 3D structures using cryogenic high-angle annular dark field scanning transmission electron microscopy (Cryo-HAADF-STEM), which is a more accurate method for nanoparticle morphology than conventional chemisorption, are correlated with experimental reversible hydrogen adsorption properties. The correlations provide the first direct evidence of very high activity on the nanoparticle surface and the nature of adsorption sites. The results have important implications in general for the use of electron nano-tomography in the design of supported metallic nanoparticles for hydrogen separation membranes.
RESUMEN
A simple method of preparing Ag2CO3 nanoparticles utilising high area gamma-alumina nanoneedles has been developed; these are promising antimicrobial agents against diverse bacterial strains.
Asunto(s)
Óxido de Aluminio/química , Antibacterianos , Carbonatos , Nanopartículas/química , Compuestos de Plata , Staphylococcus aureus/efectos de los fármacos , Antibacterianos/química , Antibacterianos/farmacología , Carbonatos/química , Carbonatos/farmacología , Pruebas de Sensibilidad Microbiana , Compuestos de Plata/química , Compuestos de Plata/farmacología , Espectrometría por Rayos X , Staphylococcus aureus/crecimiento & desarrolloRESUMEN
A variety of advanced (scanning) transmission electron microscopy experiments, carried out in aberration-corrected equipment, provide direct evidence about subtle structural changes taking place at nanometer-sized Au||ceria oxide interfaces, which agrees with the occurrence of charge transfer effects between the reduced support and supported gold nanoparticles suggested by macroscopic techniques. Tighter binding of the gold nanoparticles onto the ceria oxide support when this is reduced is revealed by the structural analysis. This structural modification is accompanied by parallel deactivation of the CO chemisorption capacity of the gold nanoparticles, which is interpreted in exact quantitative terms as due to deactivation of the gold atoms at the perimeter of the Au||cerium oxide interface.
Asunto(s)
Cerio/química , Oro/química , Nanoestructuras/química , Nanoestructuras/ultraestructura , Transporte de Electrón , Sustancias Macromoleculares/química , Ensayo de Materiales , Microscopía Electrónica de Transmisión , Conformación Molecular , Tamaño de la Partícula , Propiedades de SuperficieRESUMEN
Structural and compositional studies of nanomaterials of technological importance have been carried out using advanced electron microscopy methods, including aberration-corrected transmission electron microscopy (AC-TEM), AC-high angle annular dark field scanning TEM (AC-HAADF-STEM), AC-energy filtered TEM, electron-stimulated energy dispersive spectroscopy in the AC-(S)TEM and high-resolution TEM (HRTEM) with scanning tunneling microscopy (STM) holder. The AC-EM data reveal improvements in resolution and minimization in image delocalization. A JEOL 2200FS double-AC field emission gun TEM/STEM operating at 200 kV in the Nanocentre at the University of York has been used to image single metal atoms on crystalline supports in catalysts, grain boundaries in nanotwinned metals, and nanostructures of tetrapods. Joule heating studies using HRTEM integrated with an STM holder reveal in situ crystallization and edge reconstruction in graphene. Real-time in situ AC-HAADF-STEM studies at elevated temperatures are described. Dynamic in-column energy filtering in an AC environment provides an integral new approach to perform dynamic in situ studies with aberration correction. The new results presented here open up striking new opportunities for atomic scale studies of nanomaterials and indicate future development directions.
Asunto(s)
Microscopía Electrónica/métodos , Nanoestructuras/química , Grafito/química , Metales/química , Nanopartículas/química , Nanoestructuras/ultraestructura , Óxido de Zinc/químicaRESUMEN
A synergetic Fe-Al effect in Fe(2)O(3) nanoparticles supported on mesoporous aluminosilicates compared to pure siliceous silicates has been demonstrated, for the first time, by a remarkably superior catalytic activity of the former in the microwave-assisted selective oxidation of benzyl alcohol to benzaldehyde. This significant finding, that also deeply influences the acidity of the materials (increasing total and particularly Lewis acidity), can have important consequences in the improved efficiency of these systems in related oxidations as well as in acid catalysed processes.
RESUMEN
Advances in atomic resolution in situ environmental transmission electron microscopy for direct probing of gas-solid reactions, including at very high temperatures (approximately 2000 degrees C) are described. In addition, recent developments of dynamic real time in situ studies at the Angstrom level using a hot stage in an aberration corrected environment are presented. In situ data from Pt/Pd nanoparticles on carbon with the corresponding FFT/optical diffractogram illustrate an achieved resolution of 0.11 nm at 500 degrees C and higher in a double aberration corrected TEM/STEM instrument employing a wider gap objective pole piece. The new results open up opportunities for dynamic studies of materials in an aberration corrected environment.
Asunto(s)
Microscopía Electrónica de Rastreo/instrumentación , Microscopía Electrónica de Transmisión/instrumentación , Nanopartículas/química , Carbono/química , Nanopartículas/ultraestructura , Transición de Fase , Temperatura , Compuestos de Tungsteno/químicaRESUMEN
An efficient protocol for the hydrogenation of platform molecules (e.g. succinic acid) in aqueous environments using supported metal nanoparticles on polysaccharide derived mesoporous carbonaceous materials is reported for the first time.