RESUMEN
CTCF is crucial for chromatin structure and transcription regulation in early embryonic development. However, the kinetics of CTCF chromatin occupation in preimplantation embryos have remained unclear. In this study, we used CUT&RUN technology to investigate CTCF occupancy in mouse preimplantation development. Our findings revealed that CTCF begins binding to the genome prior to zygotic genome activation (ZGA), with a preference for CTCF-anchored chromatin loops. Although the majority of CTCF occupancy is consistently maintained, we identified a specific set of binding sites enriched in the mouse-specific short interspersed element (SINE) family B2 that are restricted to the cleavage stages. Notably, we discovered that the neuroprotective protein ADNP counteracts the stable association of CTCF at SINE B2-derived CTCF-binding sites. Knockout of Adnp in the zygote led to impaired CTCF binding signal recovery, failed deposition of H3K9me3, and transcriptional derepression of SINE B2 during the morula-to-blastocyst transition, which further led to unfaithful cell differentiation in embryos around implantation. Our analysis highlights an ADNP-dependent restriction of CTCF binding during cell differentiation in preimplantation embryos. Furthermore, our findings shed light on the functional importance of transposable elements (TEs) in promoting genetic innovation and actively shaping the early embryo developmental process specific to mammals.
Asunto(s)
Cromatina , Desarrollo Embrionario , Animales , Ratones , Sitios de Unión , Blastocisto/metabolismo , Cromatina/metabolismo , Desarrollo Embrionario/genética , Regulación del Desarrollo de la Expresión Génica , Proteínas de Homeodominio/metabolismo , Mamíferos , Ratones Noqueados , Proteínas del Tejido Nervioso/metabolismo , Cigoto/metabolismoRESUMEN
N6-methyladenosine (m6A) is the most abundant mRNA modification and is installed by the METTL3-METTL14-WTAP methyltransferase complex. Although the importance of m6A methylation in mRNA metabolism has been well documented recently, regulation of the m6A machinery remains obscure. Through a genome-wide CRISPR screen, we identify the ERK pathway and USP5 as positive regulators of the m6A deposition. We find that ERK phosphorylates METTL3 at S43/S50/S525 and WTAP at S306/S341, followed by deubiquitination by USP5, resulting in stabilization of the m6A methyltransferase complex. Lack of METTL3/WTAP phosphorylation reduces decay of m6A-labeled pluripotent factor transcripts and traps mouse embryonic stem cells in the pluripotent state. The same phosphorylation can also be found in ERK-activated human cancer cells and contribute to tumorigenesis. Our study reveals an unrecognized function of ERK in regulating m6A methylation.
Asunto(s)
Adenina/análogos & derivados , Carcinogénesis/patología , Endopeptidasas/metabolismo , Quinasas MAP Reguladas por Señal Extracelular/metabolismo , Melanoma/patología , Metiltransferasas/química , Adenina/química , Animales , Carcinogénesis/genética , Carcinogénesis/metabolismo , Embrión de Mamíferos/citología , Embrión de Mamíferos/metabolismo , Endopeptidasas/genética , Quinasas MAP Reguladas por Señal Extracelular/genética , Fibroblastos/citología , Fibroblastos/metabolismo , Humanos , Melanoma/genética , Melanoma/metabolismo , Metilación , Metiltransferasas/genética , Metiltransferasas/metabolismo , Metiltransferasas/fisiología , Ratones , Ratones Noqueados , Fosforilación , Estabilidad Proteica , Procesamiento Postranscripcional del ARNRESUMEN
N6-Methyldeoxyadenosine (6mA) has recently been shown to exist and play regulatory roles in eukaryotic genomic DNA (gDNA). However, the biological functions of 6mA in mammals have yet to be adequately explored, largely due to its low abundance in most mammalian genomes. Here, we report that mammalian mitochondrial DNA (mtDNA) is enriched for 6mA. The level of 6mA in HepG2 mtDNA is at least 1,300-fold higher than that in gDNA under normal growth conditions, corresponding to approximately four 6mA modifications on each mtDNA molecule. METTL4, a putative mammalian methyltransferase, can mediate mtDNA 6mA methylation, which contributes to attenuated mtDNA transcription and a reduced mtDNA copy number. Mechanistically, the presence of 6mA could repress DNA binding and bending by mitochondrial transcription factor (TFAM). Under hypoxia, the 6mA level in mtDNA could be further elevated, suggesting regulatory roles for 6mA in mitochondrial stress response. Our study reveals DNA 6mA as a regulatory mark in mammalian mtDNA.
Asunto(s)
ADN Mitocondrial/metabolismo , Desoxiadenosinas/metabolismo , Metiltransferasas/metabolismo , Animales , Metilación de ADN , ADN Mitocondrial/genética , Proteínas de Unión al ADN/genética , Proteínas de Unión al ADN/metabolismo , Desoxiadenosinas/genética , Regulación de la Expresión Génica , Células Hep G2 , Humanos , Hipoxia/genética , Metiltransferasas/genética , Ratones Endogámicos C57BL , Mitocondrias/genética , Mitocondrias/metabolismo , Proteínas Mitocondriales/genética , Proteínas Mitocondriales/metabolismo , Factores de Transcripción/genética , Factores de Transcripción/metabolismoRESUMEN
MOTIVATION: The burgeoning generation of single-cell or spatial multiomic data allows for the characterization of gene regulation networks (GRNs) at an unprecedented resolution. However, the accurate reconstruction of GRNs from sparse and noisy single-cell or spatial multiomic data remains challenging. RESULTS: Here, we present SCRIPro, a comprehensive computational framework that robustly infers GRNs for both single-cell and spatial multi-omics data. SCRIPro first improves sample coverage through a density clustering approach based on multiomic and spatial similarities. Additionally, SCRIPro scans transcriptional regulator (TR) importance by performing chromatin reconstruction and in silico deletion analyses using a comprehensive reference covering 1,292 human and 994 mouse TRs. Finally, SCRIPro combines TR-target importance scores derived from multiomic data with TR-target expression levels to ensure precise GRN reconstruction. We benchmarked SCRIPro on various datasets, including single-cell multiomic data from human B-cell lymphoma, mouse hair follicle development, Stereo-seq of mouse embryos, and Spatial-ATAC-RNA from mouse brain. SCRIPro outperforms existing motif-based methods and accurately reconstructs cell type-specific, stage-specific, and region-specific GRNs. Overall, SCRIPro emerges as a streamlined and fast method capable of reconstructing TR activities and GRNs for both single-cell and spatial multi-omic data. AVAILABILITY: SCRIPro is available at https://github.com/wanglabtongji/SCRIPro. SUPPLEMENTARY INFORMATION: Supplementary data are available at Bioinformatics online.
RESUMEN
Syn furan nanothreads have all oxygen atoms arranged on one side of the thread backbone; these polar threads present intriguing opportunities in electromechanical response owing to their rigid ladder-like backbone. We retrained a C/H/O reactive force field to simulate their response to external electric field for both end-anchored individual threads and bulk nanothread crystals, contrasting the results to those for poly(vinylidene fluoride) (PVDF) polymer. Whereas the field induces a length-independent torque in PVDF through backbone rotation about σ bonds, furan-derived nanothreads generate a length-dependent torque by progressively twisting their rigid backbone. This mode of response couples the rotational history of the electric field to axial tension in the anchored thread. In simulations of densely packed syn furan nanothread crystals without anchors, the crystals pole in a field (â¼3 GV/m at 300 K) similar to that seen in simulations of PVDF, suggesting that crystals of polar nanothreads can be ferroelectric.
RESUMEN
BACKGROUND: Rewriting the genomes of living organisms has been a long-standing aim in the biological sciences. The revelation of the CRISPR/Cas9 technology has revolutionized the entire biological field. Since its emergence, this technology has been widely applied to induce gene knockouts, insertions, deletions, and base substitutions. However, the classical version of this system was imperfect for inducing or correcting desired mutations. A subsequent development generated more advanced classes, including cytosine and adenine base editors, which can be used to achieve single nucleotide substitutions. Nevertheless, these advanced systems still suffer from several limitations, such as the inability to edit loci without a suitable PAM sequence and to induce base transversions. On the other hand, the recently emerged prime editors (PEs) can achieve all possible single nucleotide substitutions as well as targeted insertions and deletions, which show promising potential to alter and correct the genomes of various organisms. Of note, the application of PE to edit livestock genomes has not been reported yet. RESULTS: In this study, using PE, we successfully generated sheep with two agriculturally significant mutations, including the fecundity-related FecBB p.Q249R and the tail length-related TBXT p.G112W. Additionally, we applied PE to generate porcine blastocysts with a biomedically relevant point mutation (KCNJ5 p.G151R) as a porcine model of human primary aldosteronism. CONCLUSIONS: Our study demonstrates the potential of the PE system to edit the genomes of large animals for the induction of economically desired mutations and for modeling human diseases. Although prime-edited sheep and porcine blastocysts could be generated, the editing frequencies are still unsatisfactory, highlighting the need for optimizations in the PE system for efficient generation of large animals with customized traits.
Asunto(s)
Blastocisto , Mutación Puntual , Humanos , Animales , Porcinos , Ovinos , Mutación , Ganado , Nucleótidos , Canales de Potasio Rectificados Internamente Asociados a la Proteína GRESUMEN
BACKGROUND: CRISPR/Cas9-based genome-editing systems have been used to efficiently engineer livestock species with precise genetic alterations intended for biomedical and agricultural applications. Previously, we have successfully generated gene-edited sheep and goats via one-cell-stage embryonic microinjection of a Cas9 mRNA and single-guide RNAs (sgRNAs) mixture. However, most gene-edited animals produced using this approach were heterozygotes. Additionally, non-homozygous gene-editing outcomes may not fully generate the desired phenotype in an efficient manner. RESULTS: We report the optimization of a Cas9 mRNA-sgRNA delivery system to efficiently generate homozygous myostatin (MSTN) knockout sheep for improved growth and meat production. Firstly, an sgRNA selection software (sgRNAcas9) was used to preliminarily screen for highly efficient sgRNAs. Ten sgRNAs targeting the MSTN gene were selected and validated in vitro using sheep fibroblast cells. Four out of ten sgRNAs (two in exon 1 and two in exon 2) showed a targeting efficiency > 50%. To determine the optimal CRISPR/Cas9 microinjection concentration, four levels of Cas9 mRNA and three levels of sgRNAs in mixtures were injected into sheep embryos. Microinjection of 100 ng/µL Cas9 mRNA and 200 ng/µL sgRNAs resulted in the most improved targeting efficiency. Additionally, using both the highly efficient sgRNAs and the optimal microinjection concentration, MSTN-knockout sheep were generated with approximately 50% targeting efficiency, reaching a homozygous knockout efficiency of 25%. Growth rate and meat quality of MSTN-edited lambs were also investigated. MSTN-knockout lambs exhibited increased body weight and average daily gain. Moreover, pH, drip loss, intramuscular fat, crude protein, and shear force of gluteal muscles of MSTN-knockout lambs did not show changes compared to the wild-type lambs. CONCLUSIONS: This study highlights the importance of in vitro evaluation for the optimization of sgRNAs and microinjection dosage of gene editing reagents. This approach enabled efficient engineering of homozygous knockout sheep. Additionally, this study confirms that MSTN-knockout lambs does not negatively impact meat quality, thus supporting the adoption of gene editing as tool to improve productivity of farm animals.
Asunto(s)
Sistemas CRISPR-Cas , Miostatina , Animales , Edición Génica/métodos , Cabras/genética , Carne , Miostatina/genética , ARN Guía de Kinetoplastida/genética , ARN Mensajero , Ovinos/genéticaRESUMEN
Mammalian oocytes and zygotes have the unique ability to reprogram a somatic cell nucleus into a totipotent state. SUV39H1/2-mediated histone H3 lysine-9 trimethylation (H3K9me3) is a major barrier to efficient reprogramming. How SUV39H1/2 activities are regulated in early embryos and during generation of induced pluripotent stem cells (iPSCs) remains unclear. Since expression of the CRL4 E3 ubiquitin ligase in oocytes is crucial for female fertility, we analyzed putative CRL4 adaptors (DCAFs) and identified DCAF13 as a novel CRL4 adaptor that is essential for preimplantation embryonic development. Dcaf13 is expressed from eight-cell to morula stages in both murine and human embryos, and Dcaf13 knockout in mice causes preimplantation-stage mortality. Dcaf13 knockout embryos are arrested at the eight- to sixteen-cell stage before compaction, and this arrest is accompanied by high levels of H3K9me3. Mechanistically, CRL4-DCAF13 targets SUV39H1 for polyubiquitination and proteasomal degradation and therefore facilitates H3K9me3 removal and zygotic gene expression. Taken together, CRL4-DCAF13-mediated SUV39H1 degradation is an essential step for progressive genome reprogramming during preimplantation embryonic development.
Asunto(s)
Blastocisto/metabolismo , Desarrollo Embrionario , Regulación del Desarrollo de la Expresión Génica , Células Madre Pluripotentes Inducidas/metabolismo , Metiltransferasas/metabolismo , Proteínas de Unión al ARN/metabolismo , Proteínas Represoras/metabolismo , Animales , Blastocisto/citología , Estabilidad de Enzimas , Histonas/genética , Histonas/metabolismo , Células Madre Pluripotentes Inducidas/citología , Metiltransferasas/genética , Ratones , Ratones Endogámicos ICR , Ratones Noqueados , Oocitos/citología , Oocitos/metabolismo , Proteolisis , Proteínas de Unión al ARN/genética , Proteínas Represoras/genética , Complejos de Ubiquitina-Proteína Ligasa/genética , Complejos de Ubiquitina-Proteína Ligasa/metabolismo , Ubiquitinación/genéticaRESUMEN
Epigenetic regulations play a central role in governing the embryo development and somatic cell reprogramming. Taking advantage of recent advances in low-input sequencing techniques, researchers have uncovered a comprehensive view of the epigenetic landscape during rapid transcriptome transitions involved in the cell fate commitment. The well-organized epigenetic reprogramming also highlights the essential roles of specific epigenetic regulators to support efficient regulation of transcription activity and chromatin remodeling. This review briefly introduces the recent progress in the molecular dynamics and regulation mechanisms implicated in mouse early embryo development and somatic cell reprograming, as well as the multi-omics regulatory mechanisms of totipotency mediated by several key factors, which provide valuable resources for further investigations on the complicated regulatory network in essential biological events.
Asunto(s)
Reprogramación Celular , Epigénesis Genética , Animales , Diferenciación Celular/genética , Reprogramación Celular/genética , Ensamble y Desensamble de Cromatina , Desarrollo Embrionario/genética , RatonesRESUMEN
Nanofiltration (NF), highly prospective for drinking water treatment, faces a challenge in simultaneously removing emerging contaminants while maintaining mineral salts, particularly divalent cations. To overcome this challenge, NF membranes possessing small pores concomitant with highly negatively charged surfaces were synthesized via a two-step fabrication strategy. The key is to generate a polyamide active layer having a loose and carboxyl group-abundant segment on top and a dense barrier segment underneath. This was achieved by restrained interfacial polymerization between trimesoyl chloride and partly protonated piperazine to form a highly depth-heterogeneous polyamide network, followed by second amidation in an organic environment to remove untethered polyamide fragments and associate malonyl chlorides with reserved amine groups to introduce more negative charges. Most importantly, on first-principle engineering the spatial architecture of the polyamide layer, amplifying asymmetric charge distribution was paired with the thinning of the vertical structure. The optimized membrane exhibits high salt/organic rejection selectivity and water permeance superior to most NF membranes reported previously. The rejections of eight emerging contaminants were in the range of 66.0-94.4%, much higher than the MgCl2 rejection of 41.1%. This new fabrication strategy, suitable for various diacyl chlorides, along with the new membranes so produced, offers a novel option for NF in potable water systems.
Asunto(s)
Agua Potable , Nylons , Aminas , Cationes Bivalentes , Cloruros , Membranas Artificiales , Minerales , Nylons/química , Piperazina , Estudios Prospectivos , Sales (Química)RESUMEN
To enhance the use of nanofiltration in the production of quality drinking water, particularly through the efficient removal of micropollutants yet still preserving essential minerals, the targeted nanofiltration membranes (NFMs) are required to have small pore dimensions coupled with a high, net-negative charge density. Herein, after the formation of a separation layer using piperazine interfacially polymerized with trimesoyl chloride, the exploitation of residual amine groups was systematically investigated by different diacyl chlorides in an organic milieu, which caused the upper part of the final separation layer to be denser and highly negatively charged. Hence, this protocol offers a novel means to fabricate NFMs simultaneously endowed with a low molecular cutoff (MWCO) of 145-238 Da and a reduced rejection of MgCl2 (48%-80%) as well as a competitive water permeance. Those features are ideally applicable to the goal of removing small micropollutants while preserving mineral ions, as needed for the energy-efficient production of safe, quality drinking water. Furthermore, an attempt was made to correlate MWCO with MgCl2 rejection, which provides some insights on the nexus of the electrostatic effects constrained by size exclusion. The significance of residual amine groups and the modification environment was unveiled, and this method paves a new avenue for designing functional NFMs.
Asunto(s)
Agua Potable , Nylons , Aminas , Cationes Bivalentes , Membranas ArtificialesRESUMEN
Nanofiltration (NF) is an effective technology for removing trace organic contaminants (TrOCs), while the inherent trade-off effect between water permeance and solute rejections hinders its widespread application in water treatment. Herein, we propose a novel scheme of "monomers with sacrificial groups" to regulate the microstructure of the polyamide active layer via introducing a hydrolyzable ester group onto piperazine to control the diffusion and interfacial polymerization process. The achieved benefits include narrowing the pore size, improving the interpore connectivity, enhancing the microporosity, and reducing the active layer thickness, which collectively realized the simultaneous improvement of water permeance and enhancement of TrOCs rejection performance. The resulting membranes were superior to both the control and commercial membranes, especially in water-TrOCs selectivity. The effects of using the new monomers on the membrane physicochemical properties were systematically studied, and underlying mechanisms for the enhanced separation performance were further revealed by simulating the polymerization process through density functional theory calculation and measuring the trans-interface diffusion rate of monomers. This study demonstrates a novel promising NF membrane synthesis strategy by designing the structure of reaction monomers for achieving excellent rejection of TrOCs with a low energy input in water treatment.
RESUMEN
BACKGROUND: After domestication, the evolution of phenotypically-varied sheep breeds has generated rich biodiversity. This wide phenotypic variation arises as a result of hidden genomic changes that range from a single nucleotide to several thousands of nucleotides. Thus, it is of interest and significance to reveal and understand the genomic changes underlying the phenotypic variation of sheep breeds in order to drive selection towards economically important traits. REVIEW: Various traits contribute to the emergence of variation in sheep phenotypic characteristics, including coat color, horns, tail, wool, ears, udder, vertebrae, among others. The genes that determine most of these phenotypic traits have been investigated, which has generated knowledge regarding the genetic determinism of several agriculturally-relevant traits in sheep. In this review, we discuss the genomic knowledge that has emerged in the past few decades regarding the phenotypic traits in sheep, and our ultimate aim is to encourage its practical application in sheep breeding. In addition, in order to expand the current understanding of the sheep genome, we shed light on research gaps that require further investigation. CONCLUSIONS: Although significant research efforts have been conducted in the past few decades, several aspects of the sheep genome remain unexplored. For the full utilization of the current knowledge of the sheep genome, a wide practical application is still required in order to boost sheep productive performance and contribute to the generation of improved sheep breeds. The accumulated knowledge on the sheep genome will help advance and strengthen sheep breeding programs to face future challenges in the sector, such as climate change, global human population growth, and the increasing demand for products of animal origin.
Asunto(s)
Genómica , Lana , Animales , Domesticación , Humanos , Glándulas Mamarias Animales , Nucleótidos , Fenotipo , Ovinos/genéticaRESUMEN
Binder-jetting is a powder-bed-based additive manufacturing (AM) process that is uniquely different from other powder-bed "fusion" metal AM technologies because it is a binder-based consolidation process similar to powder metallurgy "green" part and offers a larger selection of materials and part design capabilities. In order to improve a final part's density and achieve desired mechanical properties, binder-jetting usually requires lengthy post-processing steps such as curing, sintering, and infiltration. The role of particle size distribution in this process has been demonstrated to have a major impact. When comparing different distributions such as mono- and bi-modal sizes, the latter, consisting of a mix between coarser and finer particles, has shown to increase packing density and decrease porosity for a printed part. In this present work, we employ ReaxFF reactive force-field-based molecular dynamics (MD) simulations to study the atomistic level mechanism of binder-jetting using a bi-modal austenitic stainless-steel powder mixture. In addition, we compare the fracture process of the bi-modal powder mixture system with that of a system with mono-modal particle size, aiming to understand how the finer particles in the bi-modal powder mixture contribute to raising rupture strength. The MD simulation results show that the energy barriers after curing and sintering in the bi-modal particle system increase by 42.9% and 40.9%, respectively than in the mono-modal particle system. Moreover, the analysis of chemical composition and microstructure shows that iron is dominantly oxidized by oxygen atoms rather than hydroxyl radicals. Besides, the finer particle is subject to internal oxidation during sintering because its iron core melts. In contrast, the iron core of the coarser particle remains crystalline. Additionally, the statistical analysis of bonding oxygen atoms for each reference iron atom indicates that both particles have a small ratio of iron oxidized to Fe(II) but only slowly oxidizes to Fe(III) in the binder-jetting process. The coarser particle has a lot of non-oxidized iron atoms, while the majority of iron atoms in the finer particle bond with one oxygen atom during the time scale of our MD simulations. Furthermore, de-hydroxylation and oxygen inward diffusion lead to the reduction of chromium cations throughout sintering. The original findings of this study provide a nanoscale explanation for the mechanical property improvement using a bi-modal powder mixture. Moreover, the study of chemical composition and microstructure also contributes to improving the chemical properties of binder-jetting products.
RESUMEN
Histone modifications have critical roles in regulating the expression of developmental genes during embryo development in mammals. However, genome-wide analyses of histone modifications in pre-implantation embryos have been impeded by the scarcity of the required materials. Here, by using a small-scale chromatin immunoprecipitation followed by sequencing (ChIP-seq) method, we map the genome-wide profiles of histone H3 lysine 4 trimethylation (H3K4me3) and histone H3 lysine 27 trimethylation (H3K27me3), which are associated with gene activation and repression, respectively, in mouse pre-implantation embryos. We find that the re-establishment of H3K4me3, especially on promoter regions, occurs much more rapidly than that of H3K27me3 following fertilization, which is consistent with the major wave of zygotic genome activation at the two-cell stage. Furthermore, H3K4me3 and H3K27me3 possess distinct features of sequence preference and dynamics in pre-implantation embryos. Although H3K4me3 modifications occur consistently at transcription start sites, the breadth of the H3K4me3 domain is a highly dynamic feature. Notably, the broad H3K4me3 domain (wider than 5 kb) is associated with higher transcription activity and cell identity not only in pre-implantation development but also in the process of deriving embryonic stem cells from the inner cell mass and trophoblast stem cells from the trophectoderm. Compared to embryonic stem cells, we found that the bivalency (that is, co-occurrence of H3K4me3 and H3K27me3) in early embryos is relatively infrequent and unstable. Taken together, our results provide a genome-wide map of H3K4me3 and H3K27me3 modifications in pre-implantation embryos, facilitating further exploration of the mechanism for epigenetic regulation in early embryos.
Asunto(s)
Blastocisto/metabolismo , Cromatina/metabolismo , Histonas/química , Histonas/metabolismo , Lisina/metabolismo , Regiones Promotoras Genéticas , Cigoto/metabolismo , Animales , Cromatina/genética , Inmunoprecipitación de Cromatina , Células Madre Embrionarias/metabolismo , Epigénesis Genética , Femenino , Fertilización , Genoma/genética , Masculino , Metilación , Ratones , Sitio de Iniciación de la TranscripciónRESUMEN
DNA methylation and histone modifications critically regulate the expression of many genes and repeat regions during spermatogenesis. However, the molecular details of these processes in male germ cells remain to be addressed. Here, using isolated murine sperm cells, ultra-low-input native ChIP-Seq (ULI-NChIP-Seq), and whole genome bisulfite sequencing (WGBS), we investigated genome-wide DNA methylation patterns and histone 3 Lys-9 trimethylation (H3K9me3) modifications during mouse spermatogenesis. We found that DNA methylation and H3K9me3 have distinct sequence preferences and dynamics in promoters and repeat elements during spermatogenesis. H3K9me3 modifications in histones at gene promoters were highly enriched in round spermatids. H3K9me3 modification on long terminal repeats (LTRs) and long interspersed nuclear elements (LINEs) was involved in silencing active transcription from these regions in conjunction with reestablishment of DNA methylation. Furthermore, H3K9me3 remodeling on the X chromosome was involved in meiotic sex chromosome inactivation and in partial transcriptional reactivation of sex chromosomes in spermatids. Our findings also revealed the DNA methylation patterns and H3K9me3 modification profiles of paternal and maternal germline imprinting control regions (gICRs) during spermatogenesis. Taken together, our results provide a genome-wide map of H3K9me3 modifications during mouse spermatogenesis that may be helpful for understanding male reproductive disorders.
Asunto(s)
Metilación de ADN/fisiología , Histonas/metabolismo , Espermatogénesis/fisiología , Animales , Metilación de ADN/genética , Epigenómica , Masculino , Ratones , Procesamiento Proteico-Postraduccional , Espermatogénesis/genética , Secuencias Repetidas Terminales/genética , Secuencias Repetidas Terminales/fisiologíaRESUMEN
DNA 5-methylcytosine (5mC)-specific mapping has been hampered by severe DNA degradation and the presence of 5-hydroxymethylcytosine (5hmC) using the conventional bisulfite sequencing approach. Here, we present a 5mC-specific whole-genome amplification method (5mC-WGA), with which we achieved 5mC retention during DNA amplification from limited input down to 10 pg scale with limited interference from 5hmC signals, providing DNA 5mC methylome with high reproducibility and accuracy.
Asunto(s)
5-Metilcitosina/química , ADN/análisis , Técnicas de Amplificación de Ácido Nucleico/métodos , Análisis de Secuencia de ADN/métodos , Animales , ADN/química , Metilación de ADN , Humanos , Ratones , Sulfitos/química , Secuenciación Completa del GenomaRESUMEN
Base editing has the potential to improve important economic traits in agriculture and can precisely convert single nucleotides in DNA or RNA sequences into minimal double-strand DNA breaks (DSB). Adenine base editors (ABE) have recently emerged as a base editing tool for the conversion of targeted A:T to G:C, but have not yet been used in sheep. ABEmax is one of the latest versions of ABE, which consists of a catalytically-impaired nuclease and a laboratory-evolved DNA-adenosine deaminase. The Booroola fecundity (FecBB) mutation (g.A746G, p.Q249R) in the bone morphogenetic protein receptor 1B (BMPR1B) gene influences fecundity in many sheep breeds. In this study, by using ABEmax we successfully obtained lambs with defined point mutations that result in an amino acid substitution (p.Gln249Arg). The efficiency of the defined point mutations was 75% in newborn lambs, since six lambs were heterozygous at the FecBB mutation site (g.A746G, p.Q249R), and two lambs were wild-type. We did not detect off-target mutations in the eight edited lambs. Here, we report the validation of the first gene-edited sheep generated by ABE and highlight its potential to improve economically important traits in livestock.
Asunto(s)
Receptores de Proteínas Morfogenéticas Óseas de Tipo 1/genética , Fertilidad/genética , Edición Génica/métodos , Adenina/metabolismo , Adenosina Desaminasa/metabolismo , Adenosina Desaminasa/fisiología , Animales , Cruzamiento , Femenino , Ingeniería Genética/métodos , Genotipo , Heterocigoto , Tamaño de la Camada/genética , Masculino , Mutación , Fenotipo , Polimorfismo de Nucleótido Simple , Embarazo , Ovinos/genéticaRESUMEN
5-Hydroxymethylcytosine (5hmC) arises from the oxidation of 5-methylcytosine (5mC) by Fe2+ and 2-oxoglutarate-dependent 10-11 translocation (TET) family proteins. Substantial levels of 5hmC accumulate in many mammalian tissues, especially in neurons and embryonic stem cells, suggesting a potential active role for 5hmC in epigenetic regulation beyond being simply an intermediate of active DNA demethylation. 5mC and 5hmC undergo dynamic changes during embryogenesis, neurogenesis, hematopoietic development, and oncogenesis. While methods have been developed to map 5hmC, more efficient approaches to detect 5hmC at base resolution are still highly desirable. Herein, we present a new method, Jump-seq, to capture and amplify 5hmC in genomic DNA. The principle of this method is to label 5hmC by the 6- N3-glucose moiety and connect a hairpin DNA oligonucleotide carrying an alkyne group to the azide-modified 5hmC via Huisgen cycloaddition (click) chemistry. Primer extension starts from the hairpin motif to the modified 5hmC site and then continues to "land" on genomic DNA. 5hmC sites are inferred from genomic DNA sequences immediately spanning the 5-prime junction. This technology was validated, and its utility in 5hmC identification was confirmed.
Asunto(s)
5-Metilcitosina/análogos & derivados , Genómica , 5-Metilcitosina/metabolismo , ADN/química , ADN/genética , ADN/metabolismo , Técnicas de Amplificación de Ácido NucleicoRESUMEN
In the present work, we study one of the major additive manufacturing processes, i.e., the binder jetting printing (BJP) process, at the molecular level through atomistic-scale level representations of powders and binder solutions with chromium-oxide (Cr-oxide) nanoparticles and water-based diethylene glycol solutions, respectively. The results show that both diethylene glycol and water contribute to the bonding of Cr-oxide particles during the print and curing stages by forming a hydrogen bond network. Heating the system to the burn-out temperature results in the oxidation of diethylene glycol and the decomposition of the hydrogen bond network. Subsequently, Cr-oxide particles are partially sintered by forming Cr-O bonds. The final sintering facilitates further Cr-O bond formation. Additionally, the influence of the chemical composition of the binder solution is investigated by performing ReaxFF molecular dynamics simulations on two sets of systems, which control the number of water and diethylene glycol molecules, respectively. Our results demonstrate that adding both diethylene glycol and water to the binder solution can raise the number of "useful" hydrogen bonds, resulting in a higher breaking strength at the print and curing stages. During the burn-out and sintering stages, the influence of water on the breaking strength is not obvious. In contrast, an optimal quantity of binder species exists for the breaking strength after sintering. A comparison of the ReaxFF molecular dynamics simulations using 2-ethoxyethanol, diethylene glycol and 1-(2,2,2-trihydroxyethoxy)ethane-2,2,2-triol as the binder phase indicates that an increasing number of hydroxyl groups leads to higher breaking strength at the print and curing stages. The findings from this study can be extended to identify the optimal binder chemistry, curing and sintering conditions for different material systems.