Microbeads as carriers for Bacillus pumilus: a biofertilizer focus on auxin production.

The study aimed to develop a solid biofertilizer using Bacillus pumilus, focusing on auxin production to enhance plant drought tolerance. Methods involved immobilising B. pumilus in alginate-starch beads, focusing on microbial concentration, biopolymer types, and environmental conditions. The optimal formulation showed a diameter of 3.58 mm ± 0.18, a uniform size distribution after 15 h of drying at 30 °C, a stable bacterial concentration (1.99 × 109 CFU g-1 ± 1.03 × 109 over 180 days at room temperature), a high auxin production (748.8 µg g-1 ± 10.3 of IAA in 7 days), and a water retention capacity of 37% ± 4.07. In conclusion, this new formulation of alginate + starch + L-tryptophan + B. pumilus has the potential for use in crops due to its compelling water retention, high viability in storage at room temperature, and high auxin production, which provides commercial advantages.

Alternative processes to produce chitin, chitosan, and their oligomers.

Sustainable recovery of chitin and its derivatives from shellfish waste will be achieved when the industrial production of these polymers is achieved with a high control of their molecular structure, low costs, and acceptable levels of pollution. Therefore, the conventional chemical method for obtaining these biopolymers needs to be replaced or optimized. The goal of the present review is to ascertain what alternative methods are viable for the industrial-scale production of chitin, chitosan, and their oligomers. Therefore, a detailed review of recent literature was undertaken, focusing on the advantages and disadvantages of each method. The analysis of the existing data allows suggesting that combining conventional, biological, and alternative methods is the most efficient strategy to achieve sustainable production, preventing negative impacts and allowing for the recovery of high added-value compounds from shellfish waste. In conclusion, a new process for obtaining chitinous materials is suggested, with the potential of reducing the consumption of reagents, energy, and water by at least 1/10, 1/4, and 1/3 part with respect to the conventional process, respectively.

Corrigendum to "Treatment of textile wastewater using the Co(II)/NaHCO3/H2O2 oxidation system" [Heliyon 9(12) December 2023 e22444].

[This corrects the article DOI: 10.1016/j.heliyon.2023.e22444.].

Chitin and its derivatives: Functional biopolymers for developing bioproducts for sustainable agriculture-A reality?

Chitinous materials (chitin and its derivatives) are obtained from renewable sources, mainly shellfish waste, having a great potential for the development of bioproducts as alternatives to synthetic agrochemicals. Recent studies have provided evidence that the use of these biopolymers can help control postharvest diseases, increase the content of nutrients available to plants, and elicit positive metabolic changes that lead to higher plant resistance against pathogens. However, agrochemicals are still widely and intensively used in agriculture. This perspective addresses the gap in knowledge and innovation to make bioproducts based on chitinous materials more competitive in the market. It also provides the readers with background to understand why these products are scarcely used and the aspects that need to be considered to increase their use. Finally, information on the development and commercialization of agricultural bioproducts containing chitin or its derivatives in the Chilean market is also provided.

Treatment of textile wastewater using the Co(II)/NaHCO3/H2O2 oxidation system.

Textile wastewater (TWW) is one of the most hazardous wastewaters for ecosystems when it is discharged directly into water streams without adequate treatment. Some organic pollutants, such as dyes in TWW, are considered refractory compounds that are difficult to degrade using conventional chemical and biological methods. The bicarbonate-activated peroxide (BAP) system is an advanced oxidation process (AOP) based on applying H2O2, which has been demonstrated to be a clean and efficient technology for dye degradation, with the advantage of operating under slightly alkaline pH conditions. In this study, response surface methodology (RSM) based on a central composite design (CCD) was used to optimize the degradation of TWW contaminated with the azo dye Acid Black 194 using the BAP system catalyzed with cobalt ions in solution (Co2+). The analysis of variance (ANOVA) technique was applied to identify significant variables and their individual and interactive effects on the degradation of TWW. The optimum reagent concentrations for degrading TWW at 25 °C and with 45 µM Co2+ were 787.61 and 183.34 mM for H2O2 and NaHCO3, respectively. Under these conditions, complete decolorization (≥99.40), 32.20 % mineralization, and 52.02 % chemical oxygen demand removal were achieved. Additionally, the acute toxicity of textile wastewater before and after oxidation was evaluated with guppy fish (Poecilia reticulata), showing a total reduction in mortality after treatment with the Co2+-BAP system. The Co2+-BAP oxidation system is a potential method for textile wastewater treatment, which, in addition to achieving complete decolorization and partial mineralization, improves biodegradability and reduces the toxicity of the treated water.

Effect of the Operational Conditions in the Characteristics of Ceramic Foams Obtained from Quartz and Sodium Silicate.

Ceramic foams were fabricated without using melting pots through the direct foaming of compacted powder mixtures of commercial quartz (SiO2) with fluxing agents (Na2CO3 and CaO) and a foaming agent (Na2SiO3·5H2O) at a relatively low temperature range (850-870 °C). The effects of the pressing pressure of the powders, the foaming time, foaming temperature, and mixture content were evaluated. The obtained cellular solid materials presented an acceptable volumetric expansion at a pressing pressure of 4 t. The materials only presented porosity at a minimum temperature of 850 °C and at a minimum time of 30 min. All the foamed samples showed an acceptable symmetric expansion and non-appreciable fissures. The study of the mixture content through the statistical software MODDE® shows that the porosity of the samples was principally affected by the Na2SiO3 content and the foaming temperature. The samples obtained at the optimum controlling factors proposed by this statistical software presented an apparent density, porosity, and mechanical strength of 1.09 ± 0.03 g/cm3, 56.01% ± 1.12%, and 3.90 ± 0.16 MPa, respectively. Glass and ceramics foams such as those obtained in this work become attractive as insulation materials in applications where high temperatures occur due to their higher melting points.