Ionizable Polymeric Micelles with Phenylalanine Moieties Enhance Intracellular Delivery of Self-Replicating RNA for Long-Lasting Protein Expression In Vivo.

mRNA-based therapeutics are revolutionizing the landscape of medical interventions. However, the short half-life of mRNA and transient protein expression often limits its therapeutic potential, demanding high treatment doses or repeated administrations. Self-replicating RNA (RepRNA)-based treatments could offer enhanced protein production and reduce the required dosage. Here, we developed polymeric micelles based on flexible poly(ethylene glycol)-poly(glycerol) (PEG-PG) block copolymers modified with phenylalanine (Phe) moieties via biodegradable ester bonds for the efficient delivery of RepRNA. These polymers successfully encapsulated RepRNA into sub-100 nm micelles assisted by the hydrophobicity of the Phe moieties and their ability to π-π stack with the bases in RepRNA. The micelles made from Phe-modified PEG-PG (PEG-PG(Phe)) effectively maintained the integrity of the loaded RepRNA in RNase-rich serum conditions. Once taken up by cells, the micelles triggered a pH-responsive membrane disruption, promoted by the strong protonation of the amino groups at endosomal pH, thereby delivering the RepRNA to the cytosol. The system induced strong protein expression in vitro and outperformed commercial transfecting reagents in vivo, where it resulted in enhanced and long-lasting protein expression.

Sialic acid biosensing by post-printing modification of PEDOT:PSS with pyridylboronic acid.

A poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS)-based conducting polymer, which has biorecognition capabilities, has promising biosensing applications. Previously, we developed a facile method for post-printing chemical modification of PEDOT:PSS thin films from commercial sources. Molecular recognition elements were directly introduced into the PSS side chain by a two-step chemical reaction: introduction of an ethylenediamine linker via an acid chloride reaction of the sulfonate moiety, and subsequent receptor attachment to the linker via amine coupling. In this study, the same method was used to introduce 6-carboxypyridine-3-boronic acid (carboxy-PyBA) into the linker for specifically detecting N-acetylneuraminic acid (sialic acid, SA), as a cancer biomarker. The surface-modified PEDOT:PSS films were characterized by X-ray photoelectron spectroscopy, attenuated total reflection Fourier-transform infrared spectroscopy, and static water contact angle and conductivity measurements. The specific interaction between PyBA and SA was detected by label-free reagent-free potentiometry. The SA-specific negative potential responses of modified PEDOT:PSS electrodes, which was ascribed to an SA carboxyl anion, were observed in a physiologically relevant SA range (1.6-2.9 mM) at pH 5, in a concentration-dependent manner even in the presence of 10% fetal bovine serum. The sensitivity was -2.9 mV/mM in 1-5 mM SA with a limit of detection of 0.7 mM. The sensing performances were almost equivalent to those of existing graphene-based electrical SA sensors. These results show that our chemical derivatization method for printing PEDOT:PSS thin films will have applications in SA clinical diagnostics.

Chemically Induced pH Perturbations for Analyzing Biological Barriers Using Ion-Sensitive Field-Effect Transistors.

Potentiometric pH measurements have long been used for the bioanalysis of biofluids, tissues, and cells. A glass pH electrode and ion-sensitive field-effect transistor (ISFET) can measure the time course of pH changes in a microenvironment as a result of physiological and biological activities. However, the signal interpretation of passive pH sensing is difficult because many biological activities influence the spatiotemporal distribution of pH in the microenvironment. Moreover, time course measurement suffers from stability because of gradual drifts in signaling. To address these issues, an active method of pH sensing was developed for the analysis of the cell barrier in vitro. The microenvironmental pH is temporarily perturbed by introducing a low concentration of weak acid (NH4+) or base (CH3COO-) to cells cultured on the gate insulator of ISFET using a superfusion system. Considering the pH perturbation originates from the semi-permeability of lipid bilayer plasma membranes, induced proton dynamics are used for analyzing the biomembrane barriers against ions and hydrated species following interaction with exogenous reagents. The unique feature of the method is the sensitivity to the formation of transmembrane pores as small as a proton (H+), enabling the analysis of cell-nanomaterial interactions at the molecular level. The new modality of cell analysis using ISFET is expected to be applied to nanomedicine, drug screening, and tissue engineering.

Internalization Mechanisms of Pyridinium Sulfobetaine Polymers Evaluated by Induced Protic Perturbations on Cell Surfaces.

Understanding the interactions of soft nanomatters with cell membranes is particularly important for research into nanocarrier-based drug delivery systems, cell engineering, and subcellular imaging. Most nanoparticles, vesicles, micelles, and polymeric aggregates are internalized into endosomes and, eventually, lysosomes in the cytosol because of energy-dependent endocytic processes. Endocytic uptake substantially limits the access to the cytoplasm where a cargo agent acts. Bypassing the endocytic pathways by direct penetration into plasma membrane barriers would enhance the efficacy of nanomedicines. Some zwitterionic polymer nanoaggregates have been shown to permeate into the cell interior in an energy-independent manner. We have elucidated this phenomenon by observing changes in the biomembrane barrier functions against protons as the smallest indicator and have used these results to further design and develop poly(betaines). In this work, we investigated the translocation mechanisms for a series of zwitterionic poly(methacrylamide) and poly(methacrylate) species bearing a pyridinium propane sulfonate moiety in the monomers. Minor differences in the monomer structures and functional groups were observed to have dramatic effects on the interaction with plasma membranes during translocation. The ability to cross the plasma membrane involves a balance among the betaine dipole-dipole interaction, NH-π interaction, π-π interaction, cation-π interaction, and amide hydrogen bonding. We found that the cell-penetrating polysulfobetaines had limited or no detrimental effect on cell proliferation. Our findings enhance the opportunity to design and synthesize soft nanomatters for cell manipulations by passing across biomembrane partitions.

Poly(3,4-ethylenedioxythiophene) Bearing Pyridylboronic Acid Group for Specific Recognition of Sialic Acid.

Conducting polymers tethered with molecular recognition elements are good candidates for biosensing applications such as detecting a target molecule with selectivity. We develop a new monomer, namely, 3,4-ethylenedioxythiophene bearing a pyridylboronic acid moiety (EDOT-PyBA), for label-free detection of sialic acid as a cancer biomarker. PyBA, which is known to show specific binding to sialic acid in acid conditions is used as a synthetic ligand instead of lectins. PyBA confirms the enhanced binding affinity for sialic acid at pH 5.0-6.0 compared with traditional phenylboronic acid. Poly(EDOT-PyBA) is electrodeposited on a planar glassy carbon electrode and the obtained film is successfully characterized by X-ray photoelectron spectroscopy, scanning electron microscopy, atomic force microscopy, water contact angle measurements, and electrochemical impedance spectroscopy. The specific interaction of PyBA with sialic acid at the solution/electrode interface is detected by differential pulse voltammetry in a dynamic range 0.1-3.0 mM with a detection limit of 0.1 mM for a detection time of 3 min. The sensitivity covers the total level of free sialic acid in human serum and the assay time is the shorter than that of other methods. The poly(EDOT-PyBA) electrode successfully detects spiked sialic acid in human serum samples. Owing to its processability, mass productivity, and robustness, polythiophene conjugated with "boronolectin" is a candidate material for developing point-of-care and wearable biosensors.

Induced Proton Perturbation for Sensitive and Selective Detection of Tight Junction Breakdown.

Tight junctions (TJs) in the epithelial cell gap play primary roles in body defense and nutrient absorption in multicellular organisms. Standard in vitro assays lack sensitivity, selectivity, temporal resolution, and throughput for bioengineering applications. Prompted by the rigorous barrier functions of TJ, we developed a TJ assay that senses proton leaks in the cell gap using ion-sensitive field-effect transistors. Upon exposure of Madin-Darby canine kidney (MDCK) cells cultured on a gate dielectric to a calcium-chelator EGTA, ammonia-assisted pH perturbation was enhanced solely in TJ-forming cells. This was supported by simulations with increased ion permeability in the paracellular pathway. Following administration of Clostridium perfringens enterotoxin as a specific TJ inhibitor to the MDCK cells, our method detected TJ breakdown at a 13× lower concentration than a conventional trans-epithelial electrical resistance assay. Thus, the semiconductor-based active pH sensing could offer an alternative to current in vitro assays for TJs in pathological, toxicological, and pharmaceutical studies.

Electrodeposition of Zwitterionic PEDOT Films for Conducting and Antifouling Surfaces.

Conferring antifouling properties can extend the use of conducting polymers in biosensors and bioelectronics under complex biological conditions. On the basis of the antifouling properties of a series of zwitterionic polymers, we synthesized new thiophene-based compounds bearing a phosphorylcholine, carboxybetaine, or sulfobetaine pendant group. The monomers were synthesized by a facile reaction of thiol-functionalized 3,4-ethylenedioxythiophene with zwitterionic methacrylates. Electrochemical copolymerization was performed to deposit zwitterionic poly(3,4-ethylenedioxythiophene) (PEDOT) films with tunable conducting and antifouling properties on a conducting substrate. Electrochemical impedance spectroscopy showed that the conductivity and capacitance decreased with increasing zwitterionic content in the films. Protein adsorption and cell adhesion studies showed the effects of the type and content of zwitterions on the antifouling characteristics. Optimization of the electrodeposition conditions enabled development of both conducting and antifouling polymer films. These antifouling conjugated functional polymers have promising applications in biological environments.

Translocation Mechanisms of Cell-Penetrating Polymers Identified by Induced Proton Dynamics.

Unlike the majority of nanomaterials designed for cellular uptake via endocytic pathways, some of the functional nanoparticles and nanospheres directly enter the cytoplasm without overt biomembrane injuries. Previously, we have shown that a water-soluble nanoaggregate composed of amphiphilic random copolymer of 2-methacryloyloxyethyl phosphorylcholine (MPC) and n-butyl methacrylate (BMA), poly(MPC- random-BMA) (PMB), passes live cell membranes in an endocytosis-free manner. Yet, details in its translocation mechanism remain elusive due to the lack of proper analytical methods. To understand this phenomenon experimentally, we elaborated the original pH perturbation assay that is extremely sensitive to the pore formation on cell membranes. The ultimate sensitivity originates from the detection of the smallest indicator H+ (H3O+) passed through the molecularly sized transmembrane pores upon challenge by exogenous reagents. We revealed that water-soluble PMB at the 30 mol % MPC unit (i.e., PMB30W) penetrated into the cytosol of model mammalian cells without any proton leaks, in contrast to conventional cell-penetrating peptides, TAT and R8 as well as the surfactant, Triton X-100. While exposure of PMB30W permeabilized cytoplasmic lactate dehydrogenase out of the cells, indicating the alteration of cell membrane polarity by partitioning of amphiphilic PMB30W into the lipid bilayers. Nevertheless, the biomembrane alterations by PMB30W did not exhibit cytotoxicity. In summary, elucidating translocation mechanisms by proton dynamics will guide the design of nanomaterials with controlled permeabilization to cell membranes for bioengineering applications.

Gold Nanoparticles with Ligand/Zwitterion Hybrid Layer for Individual Counting of Influenza A H1N1 Subtype Using Resistive Pulse Sensing.

Resistive pulse sensing (RPS) is an analytical technique for detecting particles with nano- to micrometer diameters, such as proteins, viruses, and bacteria. RPS is a promising tool for diagnosis as it can analyze the characteristics of target particles individually from ion current blockades as pulse waveforms. However, it is difficult to discriminate analog targets because RPS merely provides physical information such as size, shape, concentration, and charge density of the analyte. Influenza A virus, which is 80-120 nm in diameter, has various subtypes, demonstrating the diversity of virus characteristics. For example, highly pathogenic avian influenza infections in humans are recognized as an emerging infectious disease with high mortality rates compared with human influenza viruses. Distinguishing human from avian influenza using their differing biological characteristics would be challenging using RPS. To develop a highly selective diagnostic system for infectious diseases, we combined RPS with molecular recognition. Gold nanoparticles (GNPs) that have human influenza A (H1N1 subtype) virus-specific sialic acid receptors on the surface were prepared as a virus label for RPS analysis. A sulfobetaine and sialic acid (ligand) hybrid surface was formed on the GNPs for the suppression of nonspecific interaction. The results show a size change of viruses derived from specific interactions with GNPs. In contrast, no size shift was observed when nonspecific sialic acid receptor-immobilized GNPs were used. Detection of viruses by individual particle counting could be a new facet of diagnosis.

pH Mapping on Tooth Surfaces for Quantitative Caries Diagnosis Using Micro Ir/IrOx pH Sensor.

A quantitative diagnostic method for dental caries would improve oral health, which directly affects the quality of life. Here we describe the preparation and application of Ir/IrOx pH sensors, which are used to measure the surface pH of dental caries. The pH level is used as an indicator to distinguish between active and arrested caries. After a dentist visually inspected and defined 18 extracted dentinal caries at various positions as active or arrested caries, the surface pH values of sound and caries areas were directly measured with an Ir/IrOx pH sensor with a diameter of 300 µm as a dental explorer. The average pH values of the sound root, the arrested caries, and active caries were 6.85, 6.07, and 5.30, respectively. The pH obtained with an Ir/IrOx sensor was highly correlated with the inspection results by the dentist, indicating that the types of caries were successfully categorized. This caries testing technique using a micro Ir/IrOx pH sensor provides an accurate quantitative caries evaluation and has potential in clinical diagnosis.

Identification of types of membrane injuries and cell death using whole cell-based proton-sensitive field-effect transistor systems.

An NH4Cl-superfused system for a cell-cultured pH-sensing transistor was developed for detecting ion leakage across the plasma membranes of model HepG2 cells. The screening of chemical species by the method developed and conventional membrane-leakage assays identified the types of membrane injuries: structural membrane disruption and pore formation. Apoptosis-mediated membrane disordering was detected by continuously monitoring the ion-barrier breakdown of the membranes using the transistor system for an extended period. Comparisons of the ISFET assay with conventional cytotoxicity assays distinguished the cell death by direct membrane injury from that by other organelle damage. Our cell-based transistor system is fast and sensitive to ion leakage of the plasma membrane due to the small hydrodynamic size of the proton and ammonium ions as the indicators. The combination of the ion leakage assay with the existing cytotoxicity assays is a new way of classifying membrane injury and cell death induced by external chemical stimuli.

Oleyl group-functionalized insulating gate transistors for measuring extracellular pH of floating cells.

The extracellular ionic microenvironment has a close relationship to biological activities such as by cellular respiration, cancer development, and immune response. A system composed of ion-sensitive field-effect transistors (ISFET), cells, and program-controlled fluidics has enabled the acquisition of real-time information about the integrity of the cell membrane via pH measurement. Here we aimed to extend this system toward floating cells such as T lymphocytes for investigating complement activation and pharmacokinetics through alternations in the plasma membrane integrity. We functionalized the surface of tantalum oxide gate insulator of ISFET with oleyl-tethered phosphonic acid for interacting with the plasma membranes of floating cells without affecting the cell signaling. The surface modification was characterized by X-ray photoelectron spectroscopy and water contact angle measurements. The Nernst response of -37.8 mV/pH was obtained for the surface-modified ISFET at 37 °C. The oleyl group-functionalized gate insulator successfully captured Jurkat T cells in a fluidic condition without acute cytotoxicity. The system was able to record the time course of pH changes at the cells/ISFET interface during the process of instant addition and withdrawal of ammonium chloride. Further, the plasma membrane injury of floating cells after exposure by detergent Triton™ X-100 was successfully determined using the modified ISFET with enhanced sensitivity as compared with conventional hemolysis assays.

Label-free potentiometry for detecting DNA hybridization using peptide nucleic acid and DNA probes.

Peptide nucleic acid (PNA) has outstanding affinity over DNA for complementary nucleic acid sequences by forming a PNA-DNA heterodimer upon hybridization via Watson-Crick base-pairing. To verify whether PNA probes on an electrode surface enhance sensitivity for potentiometric DNA detection or not, we conducted a comparative study on the hybridization of PNA and DNA probes on the surface of a 10-channel gold electrodes microarray. Changes in the charge density as a result of hybridization at the solution/electrode interface on the self-assembled monolayer (SAM)-formed microelectrodes were directly transformed into potentiometric signals using a high input impedance electrometer. The charge readout allows label-free, reagent-less, and multi-parallel detection of target oligonucleotides without any optical assistance. The differences in the probe lengths between 15- to 22-mer dramatically influenced on the sensitivity of the PNA and DNA sensors. Molecular type of the capturing probe did not affect the degree of potential shift. Theoretical model for charged rod-like duplex using the Gouy-Chapman equation indicates the dominant effect of electrostatic attractive forces between anionic DNA and underlying electrode at the electrolyte/electrode interface in the potentiometry.

Simultaneous monitoring of protein adsorption kinetics using a quartz crystal microbalance and field-effect transistor integrated device.

We developed an integrated device comprising a quartz crystal microbalance (QCM) and a field-effect transistor (FET) with a single common gold electrode in a flow chamber. An alternating current inducing oscillations in the piezoelectric quartz of the QCM sensor is electrically independent of the circuit for the FET output so that the two sensors in different detection mechanisms simultaneously record binding kinetics from a single protein solution on the same electrode. A conjunction of adsorbed mass from QCM with electric nature of bound protein from FET provided deeper understanding on a complex process of nonspecific protein adsorption and subsequent conformational changes at a solid/liquid interface. Lower apparent k(on) values obtained by FET than those obtained by QCM on hydrophobic surfaces are interpreted as preferred binding of protein molecules facing uncharged domains to the electrode surface, whereas higher k(off) values by FET than those by QCM imply active macromolecular rearrangements on the surfaces mainly driven by hydrophobic association in an aqueous medium. The advanced features of the combined sensor including in situ, label-free, and real-time monitoring provide information on structural dynamics, beyond measurements of affinities and kinetics in biological binding reactions.

Interpretation of protein adsorption through its intrinsic electric charges: a comparative study using a field-effect transistor, surface plasmon resonance, and quartz crystal microbalance.

We describe the highly sensitive detection of the nonspecific adsorption of proteins onto a 1-undecanethiol self-assembled monolayer (SAM)-formed gold electrode by parallel analysis using field effect transistor (FET), surface plasmon resonance (SPR), and quartz crystal microbalance (QCM) sensors. The FET sensor detects the innate electric charges of the adsorbed protein at the electrode/solution interface, transforming the change in charge density into a potentiometric signal in real time, without the requirement for labels. In particular, using the Debye-Huckel model, the degree of potential shift was proportional to the dry mass of adsorbed albumin and ß-casein. A comparison of the FET signal with SPR and QCM data provided information on the conformation and orientation of the surface-bound protein by observing characteristic break points in the correlation slopes between the signals. These slope transitions reflect a multistage process that occurs upon protein adsorption as a function of protein concentration, including interim coverage, film dehydration, and monolayer condensation. The FET biosensor, in combination with SPR and QCM, represents a new technology for interrogating protein-material interactions both quantitatively and qualitatively.

Transepithelial delivery of insulin conjugated with phospholipid-mimicking polymers via biomembrane fusion-mediated transcellular pathways.

Epithelial barriers that seal cell gaps by forming tight junctions to prevent the free permeation of nutrients, electrolytes, and drugs, are essential for maintaining homeostasis in multicellular organisms. The development of nanocarriers that can permeate epithelial tissues without compromising barrier function is key for establishing a safe and efficient drug delivery system (DDS). Previously, we have demonstrated that a water-soluble phospholipid-mimicking random copolymer, poly(2-methacryloyloxyethyl phosphorylcholine30-random-n­butyl methacrylate70) (PMB30W), enters the cytoplasm of live cells by passive diffusion manners, without damaging the cell membranes. The internalization mechanism was confirmed to be amphiphilicity-induced membrane fusion. In the present study, we demonstrated energy-independent permeation of PMB30W through the model epithelial barriers of Madin-Darby canine kidney (MDCK) cell monolayers in vitro. The polymer penetrated epithelial MDCK monolayers via transcellular pathways without breaching the barrier functions. This was confirmed by our unique assay that can monitor the leakage of the proton as the smallest indicator across the epithelial barriers. Moreover, energy-independent transepithelial permeation was achieved when insulin was chemically conjugated with the phospholipid-mimicking nanocarrier. The bioactivity of insulin as a growth factor was found to be maintained even after translocation. These fundamental findings may aid the establishment of transepithelial DDS with advanced drug efficiency and safety. STATEMENT OF SIGNIFICANCE: A nanocarrier that can freely permeate epithelial tissues without compromising barrier function is key for successful DDS. Existing strategies mainly rely on paracellular transport associated with tight junction breakdown or transcellular transport via transporter recognition-mediated active uptake. These approaches raise concerns about efficiency and safety. In this study, we performed non-endocytic permeation of phospholipid-mimicking polymers through the model epithelial barriers in vitro. The polymer penetrated via transcytotic pathways without breaching the barriers of biomembrane and tight junction. Moreover, transepithelial permeation occurred when insulin was covalently attached to the nanocarrier. The bioactivity of insulin was maintained even after translocation. The biomimetic design of nanocarrier may realize safe and efficient transepithelial DDS.

Organic and inorganic mixed phase modification of a silver surface for functionalization with biomolecules and stabilization of electromotive force.

A solid-state potentiometric biosensor based on the organic and inorganic mixed phase modification of a silver surface is proposed. Stabilization of the electromotive force and functionalization with biomolecules on the sensing surface were simultaneously achieved using silver chloride chemically deposited with 1,3-diaminopropanetetraacetic acid ferric ammonium salt monohydrate and a self-assembled monolayer with oligonucleotide probes, respectively. The formation of silver chloride and adsorption of alkanethiol on the silver surface were confirmed with X-ray photoelectron spectroscopy. The resulting modified surface reduced the nonspecific binding of interfering biomolecules and achieved a high signal to noise ratio. The electromotive forces of the modified silver thin film electrodes were stable under constant chloride ion concentrations. Hybridization assays were performed to detect microRNA 146. The lower limit of detection was 0.1 pM because of the small standard deviation. The proposed biosensor could be useful as a disposable single-use sensor in medical fields such as liquid biopsies.

A proton/macromolecule-sensing approach distinguishes changes in biological membrane permeability during polymer/lipid-based nucleic acid delivery.

Endosomal escape is crucial for the delivery of nucleic acids. However, the understanding of the underlying mechanisms is still deficient. In this work, we explored the effects of lipid- and polymer-based transfection reagents on the permeability of cellular membranes through an innovative method combining a proton-sensing transistor and a cytosolic LDH leakage assay, which allows us to distinguish between modes of molecule permeation that may occur during endosomal escape. By testing the commercial reagents lipofectin and in vivo JetPEI under physiological and endosomal pH conditions, we found that both lipid- and polymer-based transfection reagents have pH-dependent pore-forming activity, with the former creating smaller pores than the latter. This versatile approach of assessing carrier-membrane interactions is expected to contribute to the development of next-generation nucleic acid delivery systems.

Detection of microenvironmental changes induced by protein adsorption onto self-assembled monolayers using an extended gate-field effect transistor.

Nonspecific protein adsorption on self-assembled monolayer (SAM) alkanethiols with various terminal groups was investigated qualitatively and quantitatively using an extended gate-field effect transistor (extended gate-FET). The SAMs were characterized by XPS, cyclic voltammogram and water contact angle measurements. Changes in gate voltage of 1 mV caused by intrinsic charges of adsorbed protein on an undecanethiol SAM in 15 mM Dulbecco's phosphate buffered saline were equivalent to 3.6 ng cm(-2), 1.3 ng cm(-2), and 16 ng cm(-2) for bovine serum albumin (BSA), lysozyme, and bovine plasma fibrinogen (BPF), respectively, as calculated by the Debye-Huckel model. Adsorption coefficients, maximum adsorption densities, and Gibbs free energies of adsorption were successfully determined using the Langmuir equation. The isotherms depended on the surface properties of the SAMs for BSA and lysozyme adsorption. In contrast, changes in gate voltage were almost independent of SAM type for BPF adsorption. Adsorption of large proteins may not be quantitatively detected because of the large dimensions of the biomolecules compared with the Debye length. In summary, the FET measurement is a nonlabeling, highly sensitive, and quantitative method for detecting nonspecific adsorption of small proteins with dimensions that are comparable to the Debye length of a solution.

Molecularly engineered charge-conversion of proteins for sensitive biosensing.

To gain better signals in potentiometric biosensing of protein, site-selective chemical modification of amino acid residues was employed by exogenous acylation and glycation reactions of primary amines and the guanidinium group, converting them from cationic into anionic or neutral. The mass shift corresponding to the lysine and arginine adducts was confirmed only at the surface-exposed solvent-accessible residues. The site-selectivity of the charge-conversions resulted in maintained structural integrity and bioactivity of the proteins. The estimated negative charge density of bovine serum albumin (BSA) under physiological pH increased by 5-fold as a result of the formation of stable succinic lysine. Real-time measurement of protein adsorption onto the 1-undecanethiol self-assembled monolayer (SAM) on gold was detected using an extended gate-field effect transistor (FET). The potential shifts by the adsorption was 3-fold higher in succinylated BSA than origianl BSA, whereas more significant amplification of the signal (11-fold) was observed by the modifications of lysozyme. Furthermore, in situ modification of amino acids during the potentiometry was achieved for the tightly adsorbed lysozyme onto the SAM. In summary, site-selective charge-conversion provides a new type for the molecular "label" for biosensing with preserved conformational integrity of the protein.