Sirtuin 6 ameliorates bleomycin-induced pulmonary fibrosis via activation of lipid catabolism.

Pulmonary fibrosis is a chronic and serious interstitial lung disease with little effective therapies currently. Our incomplete understanding of its pathogenesis remains obstacles in therapeutic developments. Sirtuin 6 (SIRT6) has been shown to mitigate multiple organic fibrosis. However, the involvement of SIRT6-mediated metabolic regulation in pulmonary fibrosis remains unclear. Here, we demonstrated that SIRT6 was predominantly expressed in alveolar epithelial cells in human lung tissues by using a single-cell sequencing database. We showed that SIRT6 protected against bleomycin-induced injury of alveolar epithelial cells in vitro and pulmonary fibrosis of mice in vivo. High-throughput sequencing revealed enriched lipid catabolism in Sirt6 overexpressed lung tissues. Mechanismly, SIRT6 ameliorates bleomycin-induced ectopic lipotoxicity by enhancing lipid degradation, thereby increasing the energy supply and reducing the levels of lipid peroxides. Furthermore, we found that peroxisome proliferator-activated receptor α (PPARα) was essential for SIRT6-mediated lipid catabolism, anti-inflammatory responses, and antifibrotic signaling. Our data suggest that targeting SIRT6-PPARα-mediated lipid catabolism could be a potential therapeutic strategy for diseases complicated with pulmonary fibrosis.

Organic Dye Molecule Intercalated Vanadium Oxygen Hydrate Enables High-Performance Aqueous Zinc-Ion Storage.

Although the layered vanadium oxide-based materials have been considered to be one of the candidates for aqueous Zn-ion batteries (AZIBs), it still faces inevitable challenges of unsatisfactory capacities and sluggish kinetics because of strong electrostatic interactions between Zn-ions and structure lattice. This work addresses the strategy of pre-inserting guest materials to vanadium oxide cathode using different intercalants. To achieve this goal, the small organic dye molecules, methyl orange (MO), and methylene blue (MB) are proposed as the intercalants for vanadium oxygen hydrate (VOH). It has been demonstrated that use of these intercalants can facilitate reaction kinetics between Zn2+ and VOH, leading to an improvement of specific capacity (293 mAh g-1 at 0.3 A g-1 for MO-VOH and 311 mAh g-1 for MB-VOH) compared to VOH, a large enhancement of excellent energy density (237.1 Wh kg-1 for MO-VOH, 232.3 Wh kg-1 for MB-VOH), and a prolong lifespan operation at 3 A g-1 . The mechanism studies suggest that the weakened electrostatic interactions between the Zn-ions and V-O lattice after intercalating organic molecules contribute to boosting the electrochemical performance of AZIBs unveiled by charge density difference and binding energy.

K2CO3-Catalyzed (3 + 2) Cycloaddition Reaction of N-2,2,2-Trifluoroethylisatin Ketimines with Azodicarboxylates: Access to Spirooxindoles Containing Trifluoromethyl-1,2,4-triazolines.

Potassium carbonate-catalyzed (3 + 2) cycloaddition reaction between N-2,2,2-trifluoroethylisatin ketimines and azodicarboxylates has been developed, constructing a series of novel N-heterocycle infused spirooxindoles in good to excellent yields (up to 98%) under milder conditions. The presence of both biologically active oxindole and trifluoromethyl-1,2,4-triazoline moieties in these novel spirocyclic compounds would provide new lead structures in the discovery of heterocyclic compounds with potential pharmaceutical activities.

Regulating Spin Density using TEMPOL Molecules for Enhanced CO2-to-Ethylene Conversion by HKUST-1 Framework Derived Electrocatalysts.

The selectivity of multicarbon products in the CO2 reduction reaction (CO2RR) depends on the spin alignment of neighboring active sites, which requires a spin catalyst that facilitates electron transfer with antiparallel spins for enhanced C-C coupling. Here, we design a radical-contained spin catalyst (TEMPOL@HKUST-1) to enhance CO2-to-ethylene conversion, in which spin-disordered (SDO) and spin-ordered (SO) phases co-exist to construct an asymmetric spin configuration of neighboring active sites. The replacement of axially coordinated H2O molecules with TEMPOL radicals introduces spin-spin interactions among the Cu(II) centers to form localized SO phases within the original H2O-mediated SDO phases. Therefore, TEMPOL@HKUST-1 derived catalyst exhibited an approximately two-fold enhancement in ethylene selectivity during the CO2RR at -1.8 V versus Ag/AgCl compared to pristine HKUST-1. In situ ATR-SEIRAS spectra indicate that the spin configuration at asymmetric SO/SDO sites significantly reduces the kinetic barrier for *CO intermediate dimerization toward the ethylene product. The performance of the spin catalyst is further improved by spin alignment under a magnetic field, resulting in a maximum ethylene selectivity of more than 50 %. The exploration of the spin-polarized kinetics of the CO2RR provides a promising path for the development of novel spin electrocatalysts with superior performance.

BiOCl Nanosheets with (001), (002), and (003) Dominant Crystal Faces with Excellent Light-Degradation Ability.

Gray bismuth chloride nanosheets with a highly enhanced electric field intensity were prepared by a simple and efficient method. Their energy gap is reduced to 2.35 eV. The prepared nanosheets show high photocatalytic activity for the degradation of rhodamine B under visible light. The resulting samples were characterized by X-ray diffractometry, high-resolution scanning electron microscopy, X-ray photoelectron spectroscopy, infrared spectroscopy, UV-vis diffuse reflectance spectroscopy, specific surface area analysis, electrochemical analysis, electron paramagnetic resonance, and UV-vis spectroscopy. The photocatalytic activity of prepared BiOCl was evaluated by the degradation of RhB. The prepared BiOCl sample (0.5 g/L) could completely degrade RhB (10 mg/L) within 10 min, and its visible photocatalytic activity was 80 times that of the original white BiOCl. Superoxide radicals were the main active substance involved in organic degradation.

Telocytes protect against lung tissue fibrosis through hexokinase 2-dependent pathway by secreting hepatocyte growth factor.

Pulmonary fibrosis (PF) is one of the common manifestations of end-stage lung disease. Chronic lung failure after lung transplantation is mainly caused by bronchiolitis obliterans syndrome (BOS) and is mainly characterized by lung tissue fibrosis. Pulmonary epithelial-mesenchymal transformation (EMT) is crucial for pulmonary fibrosis. Telocytes (TCs), a new type of mesenchymal cells, play a protective role in various acute injuries. For exploring the anti-pulmonary fibrosis effect of TCs in the BOS model in vitro and the related mechanism, rat tracheal epithelial (RTE) cells were treated with transforming growth factor-ß (TGF-ß) to simulate lung tissue fibrosis in vitro. The RTE cells were then co-cultured with TCs primarily extracted from rat lung tissue. Western blot, Seahorse XF Analysers and enzyme-linked immunosorbent assay were used to detect the level of EMT and aerobic respiration of RTE cells. Furthermore, anti-hepatocyte growth factor (anti-HGF) antibody was exogenously added to the cultured cells to explore further mechanisms. Moreover, hexokinase 2 (HK2) in RTE cells was knocked down to assess whether it influences the blocking effect of the anti-HGF antibody. TGF-ß could induce lung tissue fibrosis in RTE cells in vitro. Nevertheless, TCs co-culture decreased the level of EMT, glucose metabolic indicators (lactate and ATP) and oxygen levels. Furthermore, TCs released hepatocyte growth factor (HGF). Therefore, the exogenous addition of anti-HGF antibody in the co-culture system blocked the anti-lung tissue fibrosis effect. However, HK2 knockdown attenuated the blocking effect of the anti-HGF antibody. In conclusion, TCs can protect against lung tissue fibrosis by releasing HGF, a process dependent on HK2.

CdSe@CdS quantum dot-sensitized Au/α-Fe2O3 structure for photoelectrochemical detection of circulating tumor cells.

Circulating tumor cells (CTCs) are the important biomarker for cancer diagnosis and individualized treatment. However, due to the extreme rarity of CTCs (only 1-10 CTCs are found in every milliliter of peripheral blood) high sensitivity and selectivity are urgently needed for CTC detection. Here, a sandwich PEC cytosensor for the ultrasensitive detection of CTCs was developed using the photoactive material Au NP/-Fe2O3 and core-shell CdSe@CdS QD sensitizer. In the proposed  protocol, the CdSe@CdS QD/Au NP/α-Fe2O3-sensitized structure with cascade band-edge levels could evidently promote the photoelectric conversion efficiency due to suitable light absorption and efficient electron-hole pair recombination inhibition. Additionally, a dendritic aptamer-DNA concatemer was constructed for highly efficient capture of MCF-7 cells carrying CdSe@CdS QDs, a sensitive material. The linear range of this proposed signal-on PEC sensing method was 300 cell mL-1 to 6 × 105 cell mL-1 with a detection limit of 3 cell mL-1, and it demonstrated an ultrasensitive response to CTCs. Furthermore, this PEC sensor enabled accurate detection of  CTCs in serum samples. Hence, a promising strategy for CTC detection in clinical diagnosis was developed based on CdSe@CdS QD-sensitized Au NP/α-Fe2O3-based PEC cytosensor with dendritic aptamer-DNA concatemer.

Engineering Oxygen Vacancies on Mixed-Valent Mesoporous α-MnO2 for High-Performance Asymmetric Supercapacitors.

Intrinsically poor conductivity and sluggish ion-transfer kinetics limit the further development of electrochemical storage of mesoporous manganese dioxide. In order to overcome the challenge, defect engineering is an effective way to improve electrochemical capability by regulating electronic configuration at the atomic level of manganese dioxide. Herein, we demonstrate effective construction of defects on mesoporous α-MnO2 through simply controlling the degree of redox reaction process, which could obtain a balance between Mn3+/Mn4+ ratio and oxygen vacancy concentration for efficient supercapacitors. The different structures of α-MnO2 including the morphology, specific surface area, and composition are successfully constructed by tuning the mole ratio of KMnO4 to Na2SO3. The electrode materials of α-MnO2-0.25 with an appropriate Mn3+/Mn4+ ratio and abundant oxygen vacancy showed an outstanding specific capacitance of 324 F g-1 at 0.5 A g-1, beyond most reported MnO2-based materials. The asymmetric supercapacitors formed from α-MnO2-0.25 and activated carbon can present an energy density as high as of 36.33 W h kg-1 at 200 W kg-1 and also exhibited good cycle stability over a wide voltage range from 0 to 2.0 voltage (kept at approximately 98% after 10 000 cycles in galvanostatic cycling tests) and nearly 100% Coulombic efficiency. Our strategy lays a foundation for fine regulation of defects to improve charge-transfer kinetics.

Construction of Multifunctional and Adjustable Langmuir-Blodgett Composite Films Containing Black Phosphorus with High Stability for Optically Electrical Applications.

Fabrication of composite thin-film materials based on black phosphorus (BP) will greatly broaden the applications of BP in various areas. However, it is still a challenge to prepare a BP-based composite film with good stability and controllable structure. In this work, a series of BP-based composite Langmuir-Blodgett (LB) films are prepared by the self-assembly of polyethyleneimine (PEI)-modified BP nanosheets (BPNSs) (BPNS-PEI) and dye molecules. The presence of PEI greatly improves the stability of BPNSs. As for BPNS-PEI and dye molecules, the electrostatic interactions or π-π stacking interactions ensure the formation of stable composite LB films. Due to the protonation and deprotonation of amino groups, the synthesized BPNS-PEI/dye composite films show a sensitive response to acid and alkali gases, which shows wide application prospects as a highly sensitive gas sensor. Furthermore, surface-enhanced Raman scattering (SERS) proves that the prepared LB films exhibit good reproducibility and obvious Raman enhancement effect on rhodamine 6G molecules. In addition, due to the high carrier transfer rate of the obtained composite films, they possess enhanced photocurrent generation performance than pure BPNS-PEI and pure dye films. The current work demonstrates an effective method for preparing the ordered self-assembled BP-based composite LB films with good SERS and photoelectric conversion performance.

Over-Reduction-Controlled Mixed-Valent Manganese Oxide with Tunable Mn2+/Mn3+ Ratio for High-Performance Asymmetric Supercapacitor with Enhanced Cycling Stability.

Manganese oxides composed of various valence states Mnx+ (x = 2, 3, and 4) have attracted wide attention as promising electrode materials for asymmetric supercapacitor. However, the poor electrical conductivity limited their performance and application. Appropriate regulation content of Mnx+ in mixed-valent manganese oxide can tune the electronic structure and further improve their conductivity and performance. Herein, we prepared manganese oxides with different Mn2+/Mn3+ ratios through an over-reduction (OR) strategy for tuning the internal electron structure of mixed-valent manganese, which could make these material oxides a good platform for researching the structure-property relationships. The Mn2+/Mn3+ ratio of manganese oxide could be precisely tuned from 0.6 to 1.7 by controlling the amount of reducing agent for manipulating the redox processes, where the manganese oxide electrode with the most appropriate Mn2+/Mn3+ ratio, as 1.65 (OR4) exhibits large capacitance (274 F g-1) and the assembling asymmetric supercapacitors by combining OR4 (positive) and the commercial activated carbon (as negative) achieved large 2.0 V voltage window and high energy density of 27.7 Wh kg-1 (power density of 500 W kg-1). The cycle lifespan of the OR4//AC could keep about 92.9% after 10 000-cycle tests owing to the Jahn-Teller distortion of the Mn(III)O6 octahedron, which is more competitive compared to other work. Moreover, a red-light-emitting diode (LED) can easily be lit for 15 min by two all-solid supercapacitor devices in a series.

CS-CNTs homojunctions prepared byin situgrowth of carbon nanotubes on the surface of porous carbon spheres for lithium-sulfur batteries.

Lithium-sulfur battery is expected to become a new generation of commercial battery owing to its ultra-high theoretical specific capacity, low-cost, and environmental benign. However, the inherent insulation of sulfur and the shuttle effect of lithium polysulfide between electrodes limit the application of lithium-sulfur battery. In order to solve these problems, we focus on the design of carbon-sulfur composite structure. Herein, CS-CNTs homojunctions featured with the carbon nanotubes (CNTs)in situgrown on carbon sphere (CS) is designed and synthesized by simple polymerization and heat treatment. The composites of CS with interconnected pore networks and CNTs with high conductivity not only offer a conductive framework to promote fast electron transmission, but also provide a larger space to load sulfur and effectively capture polysulfides. The CS-CNTs@S cathode shows better electrochemical performance compared with CS-CPs@S and CS@S. The first discharge specific capacity is 1053 mAh g-1at 0.1 C. After 200 cycles, the specific capacity still remains at 427 mAh g-1.

Preparation and High Photocurrent Generation Enhancement of Self-Assembled Layered Double Hydroxide-Based Composite Dye Films.

Understanding photocurrent conversion of layered double hydroxide (LDH) materials will be a key step in the future application of these materials to light-capturing molecular devices. In the present study, ultrathin nickel-iron layered double hydroxide/dye (NF-LDH/dye) Langmuir-Blodgett (LB) semiconductor films were prepared using an LB device and deposited on an indium tin oxide (ITO) substrate as a photoanode. The photoelectric conversion efficiency of the prepared LB semiconductor film materials was tested. A comparative experiment was performed to effectively explore the photoelectric conversion performances of the LB semiconductor film materials. Specifically, the NF-LDH cast film electrode, the dye cast film electrode, and an ultrathin composite LB film electrode were used as typical samples to explore photoelectric conversion performances. The electrochemical workstation was used to study the photocurrent density, linear scanning voltammetry curve, and electrochemical impedance spectroscopy of LB film electrodes with different layers. The results show that the film electrode cast by LDH alone or dye alone produces weak photocurrent. The photoelectric conversion efficiency of the LB film electrode is enhanced due to the different dyes' molecular structures and/or aggregations on the surface of LDH with various morphological patterns. The combined NF-LDH/dye composite LB film photoelectrode can generate a photocurrent that is 2-5 times stronger than the raw material, and the stable use efficiency is more than 92%. Present obtained composite LB films demonstrated a uniform morphology and good photoelectric conversion ability. This work provides a useful reference for the field of LDH semiconductor optoelectronic devices and solar cells.

Porous FeO x /carbon nanocomposites with different iron oxidation degree for building high-performance lithium ion batteries.

Transition metal oxides have attracted lots of interest for lithium ion battery (LIB) due to the high theoretical capacity, however, the large specific volume change, low electrical conductivity and slow intrinsic lithiation/delithiation still limit the practical applications. In order to overcome the challenge, a novel type of high temperature annealing treatment for the synthesis of 3D porous FeO x nanocrystals embedded in a partially carbon matrix as an example for high-performance LIB is reported. The FeO x /carbon nanocomposites with coral-like architecture achieved at 700 °C (F700) exhibit good long term cyclability with a reversible capacity 1012 mAh g-1 remain after 500 cycles at 1.0 A g-1 and the high rate capacity with a reversible capacity of 233 mAh g-1 even at extremely high current density of 20 A g-1. These excellent electrochemical performances could be attributed to the 3D porous structure and carbon coating, which could not only provide excellent electronic conductivity and enough elastic buffer space to accommodate volume changes upon lithium insertion/extraction, but also effectively avoid agglomeration of the Fe3O4 nanocrystals and maintain the structural integrity of the electrode during the charge/discharge process.

Ni(HCO3)2 nanosheet/nickel tetraphosphate (Ni(P4O11)) nanowire composite as a high-performance electrode material for asymmetric supercapacitors.

Nickel compounds, especially Ni(HCO3)2 (here denoted as NiC), have been widely combined with other materials to obtain composites with a more favorable structure that exhibit excellent electrochemical performance as supercapacitors. Unfortunately, the complicated processes for preparing such composites directly restrict their further application. Herein, we prepared a NiC/nickel tetraphosphate (Ni(P4O11)) nanocomposite (NiC/NiP) by introducing [Formula: see text] ions into the NiC reaction system; this composite can be applied in high-performance supercapacitors. The micromorphology of NiC/NiP material displayed an appropriate combination of NiP nanowires and thin NiC nanosheets, which provide sufficient active sites, short ion diffusion paths and fast ion diffusion speeds. NiC/NiP material exhibited an excellent rate performance of 70.2% retained capacity, although the current was increased by 15 times (1196 F g-1 at 2.0 A g-1 and 840 F g-1 at 30 A g-1). The energy density of a NiC/NiP//active carbon (AC) asymmetric supercapacitor fabricated in 6 M KOH was as much as 39.02 W h kg-1 and 26.67 W h kg-1 under corresponding power densities of 160 W kg-1 and 8000 W kg-1, respectively. The asymmetric supercapacitor delivered a stable cyclic performance of 78% capacitive retention after 5000 continuous charge/discharge cycles. More importantly, a 2.5 V light-emitting diode was lit successfully by two NiC/NiP//AC asymmetric supercapacitors in series. These results confirm that NiC/NiP nanocomposite has great potential in practical applications of electrochemical energy storage devices.

Oestrogen Receptor ß Activation Protects Against Myocardial Infarction via Notch1 Signalling.

PURPOSE: Oestrogen receptor ß is believed to exert a cardioprotective effect against ischaemic injury. Nonetheless, the mechanism underlying its protective action remains to be fully elucidated. Recently, increased attention has been focused on Notch1 signalling for ameliorating cardiac ischaemic injury. Here, we hypothesised that oestrogen receptor ß activation attenuates myocardial infarction (MI)-induced cardiac damage by modulating the Notch1 signalling pathway. METHODS: Male C57BL/6 mice were used to establish an MI model through the ligation of the anterior descending branch of the left coronary artery. Two chemical drugs, 2,3-Bis(4-hydroxyphenyl)-propionitrile (DPN) and N-[N-(3,5-difluorophenacetyl)-l-alanyl]-s-phenylglycine t-butyl ester (DAPT), a specific inhibitor of Notch1 signalling) were administered via intraperitoneal injection to change oestrogen receptor ß and Notch1 activities. Immunohistochemistry, western blot analysis, enzyme-linked immunosorbent assay (Elisa) assessment and echocardiography were used in this study to analyse cardiac oxidative stress, apoptosis, infraction volume, fibrosis and cardiac function. RESULTS: DPN-mediated oestrogen receptor ß activation effectively protected cardiomyocytes from MI-induced oxidative damage and apoptosis. Furthermore, oestrogen receptor ß activation reduced the infarct size and lowered the levels of myocardial enzymes in the serum, thereby leading to greater overall cardiac function improvement. Ischaemic injury-induced myocardial fibrosis was attenuated by oestrogen receptor ß activation. Nevertheless, all of these cardioprotective effects of oestrogen receptor ß activation were almost abrogated by DAPT administration, i.e. DAPT attenuated the anti-oxidative and anti-apoptotic effects and the decrease in infarct and fibrotic areas and reversed cardiac functional recovery. The levels of phospho-phosphatidylinositol-3-kinase (PI3K) and phospho-protein kinase B (Akt) were increased after DPN administration, and this change was reversed after DAPT was administered. CONCLUSIONS: All of these new findings indicate that oestrogen receptor ß activation is effective in ameliorating MI-induced cardiac dysfunction by enhancing Notch1 signalling and that PI3K/Akt signalling is the downstream mediator.

Inhibition of Peptidyl Arginine Deiminase-4 Prevents Renal Ischemia-Reperfusion-Induced Remote Lung Injury.

Ischemia reperfusion (IR) can lead to acute kidney injury and can be complicated by acute lung injury, which is one of the leading causes of acute kidney injury-related death. Peptidyl arginine deiminase-4 (PAD4) is a member of the PAD enzyme family and plays a critical role in inflammatory reactions and neutrophil extracellular trap formation in a variety of pathological conditions. It has been reported that PAD4 inhibition can protect certain organs from ischemic injury. In this study, we aimed to understand the mode of action of PAD4 in renal ischemia-reperfusion-mediated acute lung injury. Bilateral renal pedicle occlusion was induced for 30 min followed by reperfusion for 24 h. A specific inhibitor of PAD4, GSK484, was delivered via intraperitoneal injection to alter the PAD4 activity. The pulmonary PAD4 expression, pulmonary impairment, neutrophil infiltration, Cit-H3 expression, neutrophil extracellular trap formation, inflammatory cytokine secretion, and pulmonary apoptosis were analyzed. We found that renal ischemia reperfusion was associated with pulmonary pathological changes and increases in neutrophil infiltration, neutrophil extracellular trap formation, and inflammatory cytokine secretion in the lungs of the recipient animals. Suppression of PAD4 by GSK484 reduced remote lung injury by mitigating neutrophil infiltration, neutrophil extracellular trap formation, apoptosis, and inflammatory factor secretion. Our findings demonstrate that specific PAD4 inhibition by GSK484 may be an effective strategy to attenuate distant lung injury complicating renal ischemia-reperfusion injury.

Sin1 (Stress-Activated Protein Kinase-Interacting Protein) Regulates Ischemia-Induced Microthrombosis Through Integrin αIIbß3-Mediated Outside-In Signaling and Hypoxia Responses in Platelets.

Objective- Microthrombosis as a serious consequence of myocardial infarction, impairs the microvascular environment and increases the occurrences of heart failure, arrhythmia, and death. Sin1 (stress-activated protein kinase-interacting protein) as an essential component of mTORC2 (mammalian target of rapamycin complex 2) is required for cell proliferation and metabolism in response to nutrients, stress, and reactive oxygen species and activates Akt and PKC (protein kinase C). However, the activation and function of Sin1/mTORC2 in ischemia-induced microthrombosis remain poorly understood. Approach and Results- The phosphorylation of the mTORC2 target Akt at S473 (serine 473) was significantly elevated in platelets from the distal end of left anterior descending obstructions from patients who underwent off-pump coronary artery bypass grafting compared with platelets from healthy subjects. Consistent with this finding, phosphorylation of T86 in Sin1 was also dramatically increased. Importantly, the augmented levels of phosphorylated Sin1 and Akt in platelets from 61 preoperative patients with ST-segment-elevation myocardial infarction correlated well with the no-reflow phenomena observed after revascularization. Platelet-specific Sin1 deficiency mice and Sin1 T86 phosphorylation deficiency mice were established to explore the underlying mechanisms in platelet activation. Mechanistically, Sin1 T86 phosphorylation amplifies mTORC2-mediated downstream signals; it is also required for αIIbß3-mediated outside-in signaling and plays a role in generating hypoxia/reactive oxygen species through NAD+/Sirt3 (sirtuin 3)/SOD2 (superoxide dismutase 2) pathway. Importantly, Sin1 deletion in platelets protected mice from ischemia-induced microvascular embolization and subsequent heart dysfunction in a mouse model of myocardial infarction. Conclusions- Together, the results of our study reveal a novel role for Sin1 in platelet activation. Thus, Sin1 may be a valuable therapeutic target for interventions for ischemia-induced myocardial infarction deterioration.

MicroRNA-146a protects against myocardial ischaemia reperfusion injury by targeting Med1.

BACKGROUND: Myocardial ischaemia reperfusion injury (MIRI) is a difficult problem in clinical practice, and it may involve various microRNAs. This study investigated the role that endogenous microRNA-146a plays in myocardial ischaemia reperfusion and explored the possible target genes. METHODS: MIRI models were established in microRNA-146a deficient (KO) and wild type (WT) mice. MicroRNA-146a expression was evaluated in the myocardium of WT mice after reperfusion. The heart function, area of myocardium infarction and in situ apoptosis were compared between the KO and WT mice. Microarray was used to explore possible target genes of microRNA-146a, while qRT-PCR and dual luciferase reporter assays were used for verification. Western blotting was performed to detect the expression levels of the target gene and related signalling molecules. A rescue study was used for further testing. RESULTS: MicroRNA-146a was upregulated 1 h after reperfusion. MicroRNA-146a deficiency decreased heart function and increased myocardial infarction and apoptosis. Microarray detected 19 apoptosis genes upregulated in the KO mice compared with the WT mice. qRT-PCR and dual luciferase verified that Med1 was one target gene of microRNA-146a. TRAP220, encoded by Med1 in the KO mice, was upregulated, accompanied by an amplified ratio of Bax/Bcl2 and increased cleaved caspase-3. Inhibition of microRNA-146a in H9C2 cells caused increased TRAP220 expression and more apoptosis under the stimulus of hypoxia and re-oxygenation, while knockdown of the increased TRAP220 expression led to decreased cell apoptosis. CONCLUSIONS: MicroRNA-146a exerts a protective effect against MIRI, which might be partially mediated by the target gene Med1 and related to the apoptosis signalling pathway.

PIAS1 protects against myocardial ischemia-reperfusion injury by stimulating PPARγ SUMOylation.

BACKGROUND: Myocardial ischemia-reperfusion injury (IRI) has become one of the most serious complications after reperfusion therapy in patients with acute myocardial infarction. Small ubiquitin-like modification (SUMOylation) is a reversible process, including SUMO E1-, E2-, and E3-mediated SUMOylation and SUMO-specific protease-mediated deSUMOylation, with the latter having been shown to play a vital role in myocardial IRI previously. However, little is known about the function and regulation of SUMO E3 ligases in myocardial IRI. RESULTS: In this study, we found dramatically decreased expression of PIAS1 after ischemia/reperfusion (I/R) in mouse myocardium and H9C2 cells. PIAS1 deficiency aggravated apoptosis and inflammation of cardiomyocytes via activating the NF-κB pathway after I/R. Mechanistically, we identified PIAS1 as a specific E3 ligase for PPARγ SUMOylation. Moreover, H9C2 cells treated with hypoxia/reoxygenation (H/R) displayed reduced PPARγ SUMOylation as a result of down-regulated PIAS1, and act an anti-apoptotic and anti-inflammatory function through repressing NF-κB activity. Finally, overexpression of PIAS1 in H9C2 cells could remarkably ameliorate I/R injury. CONCLUSIONS: Collectively, our findings demonstrate the crucial role of PIAS1-mediated PPARγ SUMOylation in protecting against myocardial IRI.

Hierarchical self-assembly flower-like ammonium nickel phosphate as high-rate performance electrode material for asymmetric supercapacitors with enhanced energy density.

Ammonium nickel phosphate has a large specific capacitance as an electrode material at low current density, but its capacitance decays fast at high current density, which directly affects the rate performance of supercapacitors. Herein, we demonstrate a facile route for the controllable synthesis of hierarchical self-assembly flower-like ammonium nickel phosphate as a high-rate electrode material for asymmetric supercapacitors, which is an important strategy to enhance the energy density at high power density. The flower-like structures are hierarchically assembled by a mass of rectangular sheets, which can provide fast electron transport and short ion diffusion path, thereby exhibiting excellent electrochemical performance with ultrahigh specific capacitance of 1016 F g-1 at 1.0 A g-1. More importantly, the NH4NiPO4 · H2O materials exhibit outstanding rate performance (800 F g-1 even at large current density of 30 A g-1) and superior long-term cycle life (83% of capacity retention up to 3000 cycles at 5 A g-1). Furthermore, the NH4NiPO4 · H2O//AC asymmetric supercapacitors are assembled in aqueous KOH electrolyte, and exhibit high energy density (46.2 Wh kg-1 at 160 W kg-1 and 26.7 Wh kg-1 at a large power density of 4000 W kg-1, respectively). Due to the outstanding electrochemical performance, the all-solid-state asymmetric supercapacitors are successfully constructed using these materials.