Effects of Porphyromonas gingivalis and Aggregatibacter actinomycetemcomitans on Modeling Subgingival Microbiome and Impairment of Oral Epithelial Barrier.

Periodontitis is an exemplar of dysbiosis associated with the coordinated action of multiple members within the microbial consortium. The polymicrobial synergy and dysbiosis hypothesis proposes a dynamic host-microbiome balance, with certain modulators capable of disrupting eubiosis and driving shifts towards dysbiosis within the community. However, these factors remain to be explored. We established a Porphyromonas gingivalis- or Aggregatibacter actinomycetemcomitans-modified subgingival microbiome model and 16S rRNA sequencing revealed that P. gingivalis and A. actinomycetemcomitans altered the microbiome structure and composition indicated by α and ß diversity metrics. P. gingivalis increased the subgingival dysbiosis index (SDI), while A. actinomycetemcomitans resulted in a lower SDI. Furthermore, P. gingivalis-stimulated microbiomes compromised epithelium function and reduced expression of tight junction proteins, whereas A. actinomycetemcomitans yielded mild effects. In conclusion, by inoculating P. gingivalis, we created dysbiotic microcosm biofilms in vitro resembling periodontitis-related subgingival microbiota, exhibiting enhanced dysbiosis and impaired epithelium integrity.

Regulatory function of the novel transcription factor CxrC in Penicillium oxalicum.

Numerous transcription factors (TFs) in ascomycete fungi play crucial roles in cellular processes; however, how most of them function is poorly understood. Here, we identified and characterized a novel TF, CxrC (POX01387), acting downstream of the key TF CxrA, which is essential for plant-biomass-degrading-enzyme (PBDE) production in Penicillium oxalicum. Deletion of cxrC in P. oxalicum significantly affected the production of PBDEs, as well as mycelial growth and conidiospore production. CxrA directly repressed the expression of cxrC after about 12 hr following switch to Avicel culture. CxrC bound the promoters of major PBDE genes and genes involved in conidiospore development. CxrC was found to bind the TSSGTYR core sequence (S: C and G; Y: T and C; R: G and A) of the important cellulase genes cbh1 and eg1. Both N- and C-terminal peptides of CxrC and the CxrC phosphorylation were found to mediate its homodimerization. The conserved motif LPSVRSLLTP (65-74) in CxrC was found to be required for regulating cellulase production. This study reveals novel mechanisms of TF-mediated regulation of the expression of PBDE genes and genes involved in cellular processes in an ascomycete fungus.

Involvement of phospholipase PLA2 in production of cellulase and xylanase by Penicillium oxalicum.

Phospholipases play vital roles in immune and inflammatory responses in mammals and plants; however, knowledge of phospholipase functions in fungi is limited. In this study, we investigated the effects of deleting predicted phospholipase genes on cellulase and xylanase production, and morphological phenotype, in Penicillium oxalicum. Individual deletion of nine of the ten predicted phospholipase genes resulted in alteration of cellulase and xylanase production, and the morphological phenotypes, to various degrees. The mutant ∆POX07277 lost 22.5 to 82.8% of cellulase (i.e., filter paper cellulase, carboxymethylcellulase, and p-nitrophenyl-ß-cellobiosidase) and xylanase production, whereas p-nitrophenyl-ß-glucopyranosidase production increased by 5.8-127.8 fold. POX07277 (P. oxalicum gene No. 07277) was predicted to encode phospholipase A2 and was found to negatively affect the sporulation of P. oxalicum. Comparative transcriptomic and quantitative reverse transcription-PCR analysis indicated that POX07277 dynamically affected the expression of cellulase and xylanase genes and the regulatory genes for fungal sporulation, under micro-crystalline cellulose induction. POX07277 was required for the expression of the known regulatory gene PoxCxrB (cellulolytic and xylanolytic regulator B in P. oxalicum), which is involved in cellulase and xylanase gene expression in P. oxalicum. Conversely, POX07277 expression was regulated by PoxCxrB. These findings will aid the understanding of phospholipase functions and provide novel insights into the mechanism of fungal cellulase and xylanase gene expression. KEY POINTS : • The roles of phospholipases were investigated in Penicillium oxalicum. • POX07277 (PLA2) is required for the expression of cellulase and xylanase genes. • PoxCxrB dynamically regulated POX07277 expression.

Cone beam computed tomography analysis of accessory canals of the canalis sinuosus: A prevalent but often overlooked anatomical variation in the anterior maxilla.

STATEMENT OF PROBLEM: Accessory canals of the canalis sinuosus, a bony canal carrying the anterior superior alveolar nerve and vessels, can often be present but overlooked in the anterior maxilla. Dental implant placement in this area may damage neurovascular branches if this anatomic variation is not carefully identified, resulting in unexpected complications. PURPOSE: The purpose of this retrospective study was to identify accessory canals of the canalis sinuosus and analyze their relationship to the terminal canalis sinuosus and anterior maxilla in Chinese patients to provide a warning for surgeons operating in the anterior maxilla. MATERIAL AND METHODS: Cone beam computed tomography (CBCT) scans of 1007 Chinese patients were examined to identify the prevalence and size of accessory canals with at least 1.0-mm diameter. Axial position of this canal was classified referring to the nasal cavity and adjacent teeth. Its sagittal position was determined by the distance from the bifurcation site of canalis sinuosus to the buccal alveolar crest and the distance from the canal opening to the palatal alveolar crest. Diameter of the terminal canalis sinuosus, distance from the terminal canalis sinuosus to the buccal alveolar crest, and anterior maxillary volume were measured on all scans. Binary logistic regression and the Spearman rank correlation coefficient were used for prevalence and diameter analysis. RESULTS: The prevalence of the accessory canal was 36.9%, positively correlated the anterior maxillary volume (OR 1.408) and negatively correlated with the distance from the terminal canalis sinuosus to the buccal alveolar crest (OR 0.921). Average diameter of such canal was 1.1 ±0.1 mm, significantly higher in men, positively correlated with the diameter of terminal canalis sinuosus (rs=0.163) and the distance from the canal opening to the palatal alveolar crest (rs=0.192). All accessory canals started below the buccal cortical bone, 19.3 ±2.7 mm away from the buccal alveolar crest. There were 61.9% accessory canals opened between the central and the lateral incisors. Openings here and in the central incisor region were closer to the alveolar crest than that between the lateral incisor and the canine (P<.05). CONCLUSIONS: Accessory canals of the canalis sinuosus have high prevalence in the anterior maxilla in a Chinese population. Large anterior maxillary volume has been demonstrated as a risk factor associated with the presence of such canals. The region between the central and the lateral incisors was a predominant location. Openings in this region were closer to the alveolar crest than those between the lateral incisor and the canine.

A universal adhesive incorporating antimicrobial peptide nisin: effects on Streptococcus mutans and saliva-derived multispecies biofilms.

For purpose of enhancing the antibacterial activity of a universal adhesive, the antimicrobial peptide nisin was incorporated into Single Bond Universal and its antibacterial effect on Streptococcus mutans monospecific biofilms and saliva-derived multispecies biofilms was studied. Nisin was incorporated into Single Bond Universal and the antibacterial activity was examined by confocal laser scanning microscopy (CLSM), reverse transcription-quantitative polymerase chain reaction (qRT-PCR), phenol-sulfuric acid method and lactate dehydrogenase enzymatic method. The bonding properties were tested by microtensile bond strength (µTBS) and degree of conversion (DC). Data were analyzed by one-way analysis of variance (ANOVA) and least significant difference multiple comparison tests (P < 0.05). The Single Bond Universal incorporated with 3% (w/v) nisin could significantly inhibit the growth of the S. mutans monospecific biofilms (P< 0.01) and decrease the expression of genes related to extracellular polysaccharide (EPS) synthesis (gtfB, gtfC, gtfD and spaP) and acidogenicity (ldh) (P < 0.05). 3% (w/v) nisin-incorporated Single Bond Universal could also inhibit the growth of saliva-derived multispecies biofilms and decrease the excretion of EPS and lactic acid ( P< 0.05). µTBS and DC of 3% (w/v) nisin-incorporated Single Bond Universal did not deteriorate obviously (P > 0.05). In conclusion, 3% (w/v) nisin-incorporated Single Bond Universal substantially inhibited the growth of both S. mutans monospecific and saliva-derived multispecies biofilms without compromising the bonding properties.

Advances of Anti-Caries Nanomaterials.

Caries is the most common and extensive oral chronic disease. Due to the lack of anti-caries properties, traditional caries filling materials can easily cause secondary caries and lead to treatment failure. Nanomaterials can interfere with the bacteria metabolism, inhibit the formation of biofilm, reduce demineralization, and promote remineralization, which is expected to be an effective strategy for caries management. The nanotechnology in anti-caries materials, especially nano-adhesive and nano-composite resin, has developed fast in recent years. In this review, the antibacterial nanomaterials, remineralization nanomaterials, and nano-drug delivery systems are reviewed. We are aimed to provide a theoretical basis for the future development of anti-caries nanomaterials.

Transcription Factor Atf1 Regulates Expression of Cellulase and Xylanase Genes during Solid-State Fermentation of Ascomycetes.

Transcriptional regulation of cellulolytic and xylolytic genes in ascomycete fungi is controlled by specific carbon sources in different external environments. Here, comparative transcriptomic analyses of Penicillium oxalicum grown on wheat bran (WB), WB plus rice straw (WR), or WB plus Avicel (WA) as the sole carbon source under solid-state fermentation (SSF) revealed that most of the differentially expressed genes (DEGs) were involved in metabolism, specifically, carbohydrate metabolism. Of the DEGs, the basic core carbohydrate-active enzyme-encoding genes which responded to the plant biomass resources were identified in P. oxalicum, and their transcriptional levels changed to various extents depending on the different carbon sources. Moreover, this study found that three deletion mutants of genes encoding putative transcription factors showed significant alterations in filter paper cellulase production compared with that of a parental P. oxalicum strain with a deletion of Ku70 (ΔPoxKu70 strain) when grown on WR under SSF. Importantly, the ΔPoxAtf1 mutant (with a deletion of P. oxalicumAtf1, also called POX03016) displayed 46.1 to 183.2% more cellulase and xylanase production than a ΔPoxKu70 mutant after 2 days of growth on WR. RNA sequencing and quantitative reverse transcription-PCR revealed that PoxAtf1 dynamically regulated the expression of major cellulase and xylanase genes under SSF. PoxAtf1 bound to the promoter regions of the key cellulase and xylanase genes in vitro This study provides novel insights into the regulatory mechanism of fungal cellulase and xylanase gene expression under SSF.IMPORTANCE The transition to a more environmentally friendly economy encourages studies involving the high-value-added utilization of lignocellulosic biomass. Solid-state fermentation (SSF), that simulates the natural habitat of soil microorganisms, is used for a variety of applications such as biomass biorefinery. Prior to the current study, our understanding of genome-wide gene expression and of the regulation of gene expression of lignocellulose-degrading enzymes in ascomycete fungi during SSF was limited. Here, we employed RNA sequencing and genetic analyses to investigate transcriptomes of Penicillium oxalicum strain EU2101 cultured on medium containing different carbon sources and to identify and characterize transcription factors for regulating the expression of cellulase and xylanase genes during SSF. The results generated will provide novel insights into genetic engineering of filamentous fungi to further increase enzyme production.

Intrafibrillar mineralization of polyacrylic acid-bound collagen fibrils using a two-dimensional collagen model and Portland cement-based resins.

The biomimetic remineralization of apatite-depleted dentin is a potential method for enhancing the durability of resin-dentin bonding. To advance this strategy from its initial proof-of-concept design, we sought to investigate the characteristics of polyacrylic acid (PAA) adsorption to desorption from type I collagen and to test the mineralization ability of PAA-bound collagen. Portland cement and ß-tricalcium phosphate (ß-TCP) were homogenized with a hydrophilic resin blend to produce experimental resins. The collagen fibrils reconstituted on nickel (Ni) grids were mineralized using different methods: (i) group I consisted of collagen treated with Portland cement-based resin in simulated body fluid (SBF); (ii) group II consisted of PAA-bound collagen treated with Portland cement-based resin in SBF; and (iii) group III consisted of PAA-bound collagen treated with ß-TCP-doped Portland cement-based resin in deionized water. Intrafibrillar mineralization was evaluated using transmission electron microscopy. We found that a carbonyl-associated peak at pH 3.0 increased as adsorption time increased, whereas a hydrogen bond-associated peak increased as desorption time increased. The experimental resins maintained an alkaline pH and the continuous release of calcium ions. Apatite was detected within PAA-bound collagen in groups II and III. Our results suggest that PAA-bound type I collagen fibrils can be mineralized using Portland cement-based resins.

Efficacy of pulpotomy in managing irreversible pulpitis in mature permanent teeth: A systematic review and meta-analysis.

OBJECTIVES: This paper evaluated the success rates of pulpotomy, compared its efficacy with non-surgical root canal treatment (NSRCT), evaluated different pulpotomy techniques, and analyzed the effectiveness of contemporary bioactive materials in managing irreversible pulpitis in mature permanent teeth. DATA SOURCES: A comprehensive literature search was conducted across multiple databases including PubMed, Web of Science, Scopus, and the Cochrane Library. Search was conducted from the inception of each database to the present, adhering to PRISMA 2020 guidelines. STUDY SELECTION: Studies were selected through a multi-step screening process, focusing on adult populations, randomized controlled trials, and single-arm trials. DATA: Fifteen randomized controlled trials and eight single-arm trials were included. For a follow-up period of more than 24 months, pooled clinical success rate of pulpotomy was 92.9 % (95 %CI;82.1-99.0 %), whereas pooled radiographic success rate was 78.5 % (95 %CI;66.7-88.4 %). Meta-analyses showed that there was no significant difference in success rates between pulpotomy and NSRCT, between full and partial pulpotomy techniques, or between Mineral Trioxide Aggregate pulpotomy and Calcium Enriched Mixture pulpotomy. The results indicated comparable efficacy across these variables. CONCLUSIONS: The study highlights the potential of less invasive treatments. Pulpotomy may be a viable alternative to NSRCT for managing irreversible pulpitis in mature permanent teeth. Limitations such as the low quality of some single-arm trials and the high risk of bias in some randomized controlled trials highlight the need for further research to standardize methodologies and broaden literature inclusion for a more comprehensive understanding of the efficacy of pulpotomy, considering the high success rates reported. Clinical Significance This quantitative systematic review recognizes the potential of full or partial pulpotomy as a viable treatment alternative to root canal therapy for managing irreversible pulpitis in mature permanent teeth. Future studies should aim for standardized protocols to validate these findings and improve patient treatment outcomes.

Predicting case difficulty in endodontic microsurgery using machine learning algorithms.

OBJECTIVES: The study aimed to develop and validate machine learning models for case difficulty prediction in endodontic microsurgery, assisting clinicians in preoperative analysis. METHODS: The cone-beam computed tomographic images were collected from 261 patients with 341 teeth and used for radiographic examination and measurement. Through linear regression (LR), support vector regression (SVR), and extreme gradient boosting (XGBoost) algorithms, four models were established according to different loss functions, including the L1-loss LR model, L2-loss LR model, SVR model and XGBoost model. Five-fold cross-validation was applied in model training and validation. Explained variance score (EVS), coefficient of determination (R2), mean absolute error (MAE), mean squared error (MSE) and median absolute error (MedAE) were calculated to evaluate the prediction performance. RESULTS: The MAE, MSE and MedAE values ​​of the XGBoost model were the lowest, which were 0.1010, 0.0391 and 0.0235, respectively. The EVS and R2 values ​​of the XGBoost model were the highest, which were 0.7885 and 0.7967, respectively. The factors used to predict the case difficulty in endodontic microsurgery were ordered according to their relative importance, including lesion size, the distance between apex and adjacent important anatomical structures, root filling density, root apex diameter, root resorption, tooth type, tooth length, root filling length, root canal curvature and the number of root canals. CONCLUSIONS: The XGBoost model outperformed the LR and SVR models on all evaluation metrics, which can assist clinicians in preoperative analysis. The relative feature importance provides a reference to develop the scoring system for case difficulty assessment in endodontic microsurgery. CLINICAL SIGNIFICANCE: Preoperative case assessment is a crucial step to identify potential risks and make referral decisions. Machine learning models for case difficulty prediction in endodontic microsurgery can assist clinicians in preoperative analysis efficiently and accurately.

Biomechanical perspectives on dentine cracks and fractures: Implications in their clinical management.

OBJECTIVES: The present review discussed the biomechanical properties of cracks and fractures in crown and root dentine and attempted to explain why cracked teeth and vertical root fractures are so frequent despite the existence of multiple crack toughening mechanisms in dentine. The implications of this knowledge were used to justify how these defects are managed clinically. DATA, SOURCES AND STUDY SELECTION: Literature search was conducted on PubMed, Web of Science, and Scopus for a narrative review on fracture mechanics of crown and root dentine as well as the clinical management of cracked teeth and teeth with vertical root fracture. CONCLUSIONS: Although dentine is tougher and less brittle than enamel, it's facture toughness is considerably lower than most ductile metals. Because the initiation toughness of dentine is very low, cracks initiate from incipient damage under low stress While crack toughening mechanisms exist that enable dentine to resist crack extension, these mechanisms are often inadequate for protecting dentine from crack propagation that ultimately leads to catastrophic failure. Additional factors such as ageing also reduces the resistance of dentine to crack growth. Because dentine cracks are eventually filled with bacteria biofilms upon exposure to oral fluids, they enable rapid bacteria ingress into the dental pulp via open dentinal tubules. To date, treatment options for cracked teeth are limited. While most teeth with vertical root fracture are recommended for extraction, new strategies have been reported that appeared to achieve short-term success in preserving these teeth. CLINICAL SIGNIFICANCE: Current strategies for the management for dentine cracks and fractures are limited and their long-term effectiveness remain uncertain. Understanding the characteristics, toughening mechanism and weakening factors of tooth cracks is helpful in designing better treatment.

Translation of Japanese Literature Language and Natural Language Environment Understanding Based on Artificial Neural Network.

Literary translation encompasses not only the communication of ideas across cultures but also the conversion of one word into another. The translation of Japanese literature will, therefore, undoubtedly convey this foreign culture. This study examines the semantic expression of words, the NN model for common sense reasoning, the method of building a common sense knowledge base, and the translation of Japanese literary language with an emphasis on the semantic expression and reasoning methods of natural language based on NN. The network structure, parameter processing, learning algorithm, and learning samples are all discussed in detail at the same time as the integrated NN model is presented. According to simulation results, this algorithm can achieve an accuracy of about 95% and a recall rate of about 96.5%. In addition to greatly enhancing the model's flexibility and popularity, this approach successfully addresses the issue of information loss. It can offer some references for both the translation of literary language and the understanding of natural language.

A two-phase and long-lasting multi-antibacterial coating enables titanium biomaterials to prevent implants-related infections.

In clinical work, the main challenges for titanium (Ti) implantation are bacterial infection and aseptic loosening, which severely affect the survival rate of implants. The first 4 weeks post-operation is the infection peak phase of implants. Inhibiting implant infection caused by bacteria adhesion and proliferation during the early phase as well as promoting subsequent osteointegration is essential for implant success. Herein, we constructed a quaternary ammonium carboxymethyl chitosan (QCMC), collagen (COL Ⅰ) and hydroxyapatite (HAP) multilayers coating on Ti substrates via a modified layer-by-layer (LBL) technique and polymerization of dopamine. The QCMC/COL/HAP coating exhibited a multi-antibacterial property with a two-phase function: (1) At the first 4 weeks post-operation, the covalently bonded QCMC could be slowly degraded and demonstrated both contact-killing and release-killing properties during the infection peak phase; (2) At the second phase, osteogenesis and osseointegration-promotion capabilities were enhanced by HAP under the effective control of infection. The multifilm coating was degraded for more than 45 days under the action of collagenase Ⅰ, and displayed good biocompatibility in vivo and in vitro. Most importantly, the coating exhibited a long-lasting antibacterial activity for more than 3 months, against the main pathogenic bacteria of peri-implant infections. Both in vitro studies and in vivo animal models revealed a desirable osteogenic differentiation capacity of Ti-CCH. Therefore, our study reports a two-phase, long-lasting multi-antibacterial coating on Ti-CCH and indicates potential applications of the modified LBL strategy in orthopaedic fields, which is enlightening for developing practical implant and scaffold materials.

Influence of pecking frequency at working length on the volume of apically extruded debris: A micro-computed tomography analysis.

Background/purpose: There is no consensus to date on how many repetitive pecking motions at working length (WL) should be regarded as optimal during instrumentation. Therefore, this study aimed to evaluate the effect of pecking frequency at WL on the volume of apically extruded debris using three single-file systems in curved, oval-shaped canals. Materials and methods: Forty-five single-rooted mandibular premolars with curved, oval-shaped canals were prescanned by micro-computed tomography, anatomically paired-matched, and randomly divided among three groups (n = 15 each): Reciproc Blue (RB), WaveOne Gold (WOG) and XP-endo Shaper (XPS). Samples were embedded in agarose gel to collect extruded debris. After preparation to the WL, each sample was rescanned after one, two, four, 10, and 20 pecking motions at WL, respectively. The debris volume was innovatively calculated by a modification of an existing method using micro-computed tomography. The apical preparation size was also measured. Data were compared using a two-way repeated-measures analysis of variance. Results: All single-file systems extruded debris apically, irrespective of the pecking frequency at WL. The extruded debris volume correlated positively with the minor foramen size (P < 0.05); both increased with pecking frequency for each single-file system (P < 0.05). The minor foramen size corresponded to the instrument tip size when reaching the WL once. Conclusion: To produce less debris extrusion and obtain a predictable foramen size corresponding to the instrument tip size, a single pecking motion may be preferred when using single-file systems. Caution should be exercised when applying the current results to clinical situations.

Machine learning models for prognosis prediction in endodontic microsurgery.

OBJECTIVES: This study aimed to establish and validate machine learning models for prognosis prediction in endodontic microsurgery, avoiding treatment failure and supporting clinical decision-making. METHODS: A total of 234 teeth from 178 patients were included in this study. We developed gradient boosting machine (GBM) and random forest (RF) models. For each model, 80% of the data were randomly selected for the training set and the remaining 20% were used as the test set. A stratified 5-fold cross-validation approach was used in model training and testing. Correlation analysis and importance ranking were conducted for feature selection. The predictive accuracy, sensitivity, specificity, positive predictive value (PPV), negative predictive value (NPV), F1 score, and the area under the curve (AUC) of receiver operating characteristic (ROC) curves were calculated to evaluate the predictive performance. RESULTS: There were eight important predictors, including tooth type, lesion size, type of bone defect, root filling density, root filling length, apical extension of post, age, and sex. For the GBM model, the predictive accuracy was 0.80, with a sensitivity of 0.92, specificity of 0.71, PPV of 0.71, NPV of 0.92, F1 of 0.80, and AUC of 0.88. For the RF model, the accuracy was 0.80, with a sensitivity of 0.85, specificity of 0.76, PPV of 0.73, NPV of 0.87, F1 of 0.79, and AUC of 0.83. CONCLUSIONS: The trained models were developed by eight common variables, showing the potential ability to predict the prognosis of endodontic microsurgery. The GBM model outperformed the RF model slightly on our dataset. CLINICAL SIGNIFICANCE: Clinicians can use machine learning models for preoperative analysis in endodontic microsurgery. The models are expected to improve the efficiency of clinical decision-making and assist in clinician-patient communication.

Influence of the Number of Pecking Motions at Working Length on the Shaping Ability of Single-file Systems in Long Oval-shaped Curved Canals.

INTRODUCTION: The present study compared the effect of the number of pecking motions at the working length (WL) on the shaping ability of single-file systems in long oval-shaped curved root canals. METHODS: Single-rooted mandibular premolars with long oval-shaped curved canals (25°-35°) were prescanned using micro-computed tomographic imaging, anatomically paired, and randomly divided into 3 groups (n = 15): XP-endo Shaper (XPS; FKG Dentaire, La Chaux-de-Fonds, Switzerland), Reciproc Blue (RB; VDW, Munich, Germany), and WaveOne Gold (WOG; Dentsply Sirona, Ballaigues, Switzerland). After preparation to the WL, each specimen underwent 1, 2, 4, 10, or 20 pecking motions to the WL and was rescanned. Morphologic parameters were measured and analyzed using a 2-factor repeated measures analysis of variance and the Scheirer-Ray-Hare test. RESULTS: The minor apical diameter and percentage increase in canal volume increased with the number of pecking motions, whereas the percentage of unprepared canal surface area decreased (P < .05). The mean minor diameters (in mm) at D0 varied between 0.29 and 0.35 after 4 pecking motions with the RB and WOG systems and between 0.35 and 0.36 after 10 pecking motions with the XPS system. No significant differences in canal transportation or centering ratio were observed among the groups at the levels of canal curvature and canal thirds (P > .05). CONCLUSIONS: Increasing the number of pecking motions improves the cutting efficacy of single-file systems without adversely altering the anatomic characteristics of oval-shaped curved canals. No more than 4 pecking motions for the RB and WOG systems and 10 pecking motions for the XPS system appear to be acceptable for the shaping of these difficult to clean root canals.

Periodontal Bifunctional Biomaterials: Progress and Perspectives.

Periodontitis is a chronic infectious disease that destroys periodontal supportive tissues and eventually causes tooth loss. It is attributed to microbial and immune factors. The goal of periodontal therapy is to achieve complete alveolar bone regeneration while keeping inflammation well-controlled. To reach this goal, many single or composite biomaterials that produce antibacterial and osteogenic effects on periodontal tissues have been developed, which are called bifunctional biomaterials. In this review, we summarize recent progress in periodontal bifunctional biomaterials including bioactive agents, guided tissue regeneration/guided bone regeneration (GTR/GBR) membranes, tissue engineering scaffolds and drug delivery systems and provide novel perspectives. In conclusion, composite biomaterials have been greatly developed and they should be chosen with care due to the risk of selection bias and the lack of evaluation of the validity of the included studies.

The Antibacterial Effect of Graphene Oxide on Streptococcus mutans.

To select the optimal graphene oxide (GO) for anticaries dental applications, aqueous dispersions containing GO nanosheets with various oxygen-containing functional groups were prepared and characterized using atomic force microscopy (AFM), X-ray photoelectron spectroscopy (XPS) and Raman spectroscopy. The antibacterial effect towards Streptococcus mutans (S. mutans) in both planktonic and biofilm forms was studied by colony forming units (CFU) counting, 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl tetrazolium bromide (MTT) reduction assay, live/dead fluorescent staining, and confocal laser scanning microscopy (CLSM) observation. The oxidation capacity of different GO nanosheets was examined by 2,3-bis(2-methoxy-4-nitro-5-sulfophenyl)-2H-tetrazolium-5-carboxanilide (XTT) assay and in vitro glutathione (GSH) oxidation assay. The results indicated that GO exerted strong antibacterial activities in a concentration-dependent manner towards S. mutans in both planktonic and biofilm forms. The minimum bactericidal concentration (MBC) was 40 µg/mL for planktonic S. mutans. When the concentration was higher than 80 µg/mL, 80% of the bacteria in the biofilms were devitalized. GO nanosheets with more oxygen-containing functional groups exerted higher toxicity at low concentrations. The functional groups of GO played a crucial role in its antibacterial outcome.

ARTP/EMS-combined multiple mutagenesis efficiently improved production of raw starch-degrading enzymes in Penicillium oxalicum and characterization of the enzyme-hyperproducing mutant.

BACKGROUND: Application of raw starch-degrading enzymes (RSDEs) in starch processing for biofuel production can effectively reduce energy consumption and processing costs. RSDEs are generally produced by filamentous fungi, such as Penicillium oxalicum, but with very low yields, which seriously hampers industrialization of raw starch processing. Breeding assisted by random mutagenesis is an efficient way to improve fungal enzyme production. RESULTS: A total of 3532 P. oxalicum colonies were generated after multiple rounds of mutagenesis, by atmospheric and room-temperature plasma (ARTP) and/or ethyl methanesulfonate (EMS). Of these, one mutant A2-13 had the highest RSDE activity of 162.7 U/mL, using raw cassava flour as substrate, a yield increase of 61.1%, compared with that of the starting strain, OXPoxGA15A. RSDE activity of A2-13 further increased to 191.0 U/mL, through optimization of culture conditions. Increased expression of major amylase genes, including the raw starch-degrading glucoamylase gene, PoxGA15A, and its regulatory gene, PoxAmyR, as well as several single-nucleotide polymorphisms in the A2-13 genome, were detected by real-time reverse transcription quantitative PCR and genomic re-sequencing, respectively. In addition, crude RSDEs produced by A2-13, combined with commercial α-amylase, could efficiently digest raw corn flour and cassava flour at 40 °C. CONCLUSIONS: Overall, ARTP/EMS-combined mutagenesis effectively improved fungal RSDE yield. An RSDE-hyperproducing mutant, A2-13, was obtained, and its RSDEs could efficiently hydrolyze raw starch, in combination with commercial α-amylase at low temperature, which provides a useful RSDE resource for future starch processing.

The inhibitory effect of carboxyl-terminated polyamidoamine dendrimers on dentine host-derived matrix metalloproteinases in vitro in an etch-and-rinse adhesive system.

The biomimetic remineralization of collagen fibrils has increased interest in restoring the demineralized dentine generated by dental caries. Carboxyl-terminated polyamidoamine dendrimers (PAMAM-COOH), hyperbranched polymeric macromolecules, can act as non-collagenous proteins to induce biomimetic remineralization on a dentine organic matrix. However, in vivo remineralization is an extremely time-consuming process; before complete remineralization, demineralized dentine collagen fibrils are susceptible to degradation by host-derived matrix metalloproteinases (MMPs). Therefore, we examined the effect of fourth-generation PAMAM-COOH (G4-PAMAM-COOH) on the collagenolytic activities of endogenous MMPs, the interaction between G4-PAMAM-COOH and demineralized dentine collagen and the influence of G4-PAMAM-COOH pre-treatment on resin-dentine bonding. G4-PAMAN-COOH not only inhibited exogenous soluble rhMMP9 but also hampered the proteolytic activities of dentine collagen-bound MMPs. Cooperated with the results of G4-PAMAM-COOH absorption and desorption, FTIR spectroscopy provided evidence for the exclusive electrostatic interaction rather than hydrogen or covalent bonding between G4-PAMAM-COOH and dentine collagen. Furthermore, G4-PAMAM-COOH pre-treatment showed no damage to resin-dentine bonding because it did not significantly decrease the elastic modulus of the demineralized dentine, degree of conversion, penetration of the adhesive into the dentinal tubules or ultimate tensile strength. Thus, G4-PAMAM-COOH can effectively inactivate MMPs, retard the enzymolysis of collagen by MMPs and scarcely influence the application of resin-dentine bonding.