RESUMEN
A wide variety of weather conditions, from windstorms to prolonged heat events, can substantially impact power systems, posing many risks and inconveniences due to power outages. Accurately estimating the probability distribution of the number of customers without power using data about the power utility system and environmental and weather conditions can help utilities restore power more quickly and efficiently. However, the critical shortcoming of current models lies in the difficulties of handling (i) data streams and (ii) model uncertainty due to combining data from various weather events. Accordingly, this article proposes an adaptive ensemble learning algorithm for data streams, which deploys a feature- and performance-based weighting mechanism to adaptively combine outputs from multiple competitive base learners. As a proof of concept, we use a large, real data set of daily customer interruptions to develop the first adaptive all-weather outage prediction model using data streams. We benchmark several approaches to demonstrate the advantage of our approach in offering more accurate probabilistic predictions. The results show that the proposed algorithm reduces the probabilistic predictions' error of the base learners between 4% and 22% with an average of 8%, which also result in substantially more accurate point predictions. The improvement made by our algorithm is enhanced as we exchange base learners with simpler models.
RESUMEN
The risks from singular natural hazards such as a hurricane have been extensively investigated in the literature. However, little is understood about how individual and collective responses to repeated hazards change communities and impact their preparation for future events. Individual mitigation actions may drive how a community's resilience evolves under repeated hazards. In this paper, we investigate the effect that learning by homeowners can have on household mitigation decisions and on how this influences a region's vulnerability to natural hazards over time, using hurricanes along the east coast of the United States as our case study. To do this, we build an agent-based model (ABM) to simulate homeowners' adaptation to repeated hurricanes and how this affects the vulnerability of the regional housing stock. Through a case study, we explore how different initial beliefs about the hurricane hazard and how the memory of recent hurricanes could change a community's vulnerability both under current and potential future hurricane scenarios under climate change. In some future hurricane environments, different initial beliefs can result in large differences in the region's long-term vulnerability to hurricanes. We find that when some homeowners mitigate soon after a hurricane-when their memory of the event is the strongest-it can help to substantially decrease the vulnerability of a community.
RESUMEN
Data-driven predictive modeling is increasingly being used in risk assessments. While such modeling may provide improved consequence predictions and probability estimates, it also comes with challenges. One is that the modeling and its output does not measure and represent uncertainty due to lack of knowledge, that is, "epistemic uncertainty." In this article, we demonstrate this point by conceptually linking the main elements and output of data-driven predictive models with the main elements of a general risk description, thereby placing data-driven predictive modeling on a risk science foundation. This allows for an evaluation of such modeling with reference to risk science recommendations for what constitutes a complete risk description. The evaluation leads us to conclude that, as a minimum, to cover all elements of a complete risk description a risk assessment using data-driven predictive modeling needs to be supported by assessments of the uncertainty and risk related to the assumptions underlying the modeling. In response to this need, we discuss an approach for assessing assumptions in data-driven predictive modeling.
RESUMEN
There is an emerging consensus that achieving global tuberculosis control targets will require more proactive case finding approaches than are currently used in high-incidence settings. Household contact tracing (HHCT), for which households of newly diagnosed cases are actively screened for additional infected individuals is a potentially efficient approach to finding new cases of tuberculosis, however randomized trials assessing the population-level effects of such interventions in settings with sustained community transmission have shown mixed results. One potential explanation for this is that household transmission is responsible for a variable proportion of population-level tuberculosis burden between settings. For example, transmission is more likely to occur in households in settings with a lower tuberculosis burden and where individuals mix preferentially in local areas, compared with settings with higher disease burden and more dispersed mixing. To better understand the relationship between endemic incidence levels, social mixing, and the impact of HHCT, we developed a spatially explicit model of coupled household and community transmission. We found that the impact of HHCT was robust across settings of varied incidence and community contact patterns. In contrast, we found that the effects of community contact tracing interventions were sensitive to community contact patterns. Our results suggest that the protective benefits of HHCT are robust and the benefits of this intervention are likely to be maintained across epidemiological settings.
Asunto(s)
Trazado de Contacto , Tuberculosis/metabolismo , Tuberculosis/transmisión , Algoritmos , Simulación por Computador , Progresión de la Enfermedad , Composición Familiar , Salud Global , Humanos , Incidencia , Probabilidad , Informática en Salud Pública , Ensayos Clínicos Controlados Aleatorios como Asunto , Factores de Riesgo , Tuberculosis/epidemiologíaRESUMEN
Many of the most complicated and pressing problems in hazards research require the integration of numerous disciplines. The lack of a common knowledge base, however, often prohibits clear communication and interaction among interdisciplinary researchers, sometimes leading to unsuccessful outcomes. Drawing on experience with several projects and collective expertise that spans multiple disciplines, the authors argue that a promising way to enhance participation and enable communication is to have a common model, or boundary object, that can integrate knowledge from different disciplines. The result is that researchers from different disciplines who use different research methods and approaches can work together toward a shared goal. This article offers four requirements for boundary objects that may enhance hazards research. Based on these requirements, agent-based models have the necessary characteristics to be a boundary object. The article concludes by examining both the value of and the challenges from using agent-based models as the boundary object in interdisciplinary projects.
RESUMEN
We urgently need to put the concept of resilience into practice if we are to prepare our communities for climate change and exacerbated natural hazards. Yet, despite the extensive discussion surrounding community resilience, operationalizing the concept remains challenging. The dominant approaches for assessing resilience focus on either evaluating community characteristics or infrastructure functionality. While both remain useful, they have several limitations to their ability to provide actionable insight. More importantly, the current conceptualizations do not consider essential services or how access is impaired by hazards. We argue that people need access to services such as food, education, health care, and cultural amenities, in addition to water, power, sanitation, and communications, to get back some semblance of normal life. Providing equitable access to these types of services and quickly restoring that access following a disruption are paramount to community resilience. We propose a new conceptualization of community resilience that is based on access to essential services. This reframing of resilience facilitates a new measure of resilience that is spatially explicit and operational. Using two illustrative examples from the impacts of Hurricanes Florence and Michael, we demonstrate how decisionmakers and planners can use this framework to visualize the effect of a hazard and quantify resilience-enhancing interventions. This "equitable access to essentials" approach to community resilience integrates with spatial planning, and will enable communities not only to "bounce back" from a disruption, but to "bound forward" and improve the resilience and quality of life for all residents.
RESUMEN
Although individual behavior plays a major role in community flood risk, traditional flood risk models generally do not capture information on how community policies and individual decisions impact the evolution of flood risk over time. The purpose of this study is to improve the understanding of the temporal aspects of flood risk through a combined analysis of the behavioral, engineering, and physical hazard aspects of flood risk. Additionally, the study aims to develop a new modeling approach for integrating behavior, policy, flood hazards, and engineering interventions. An agent-based model (ABM) is used to analyze the influence of flood protection measures, individual behavior, and the occurrence of floods and near-miss flood events on community flood risk. The ABM focuses on the following decisions and behaviors: dissemination of flood management information, installation of community flood protection, elevation of household mechanical equipment, and elevation of homes. The approach is place based, with a case study area in Fargo, North Dakota, but is focused on generalizable insights. Generally, community mitigation results in reduced future damage, and individual action, including mitigation and movement into and out of high-risk areas, can have a significant influence on community flood risk. The results of this study provide useful insights into the interplay between individual and community actions and how it affects the evolution of flood risk. This study lends insight into priorities for future work, including the development of more in-depth behavioral and decision rules at the individual and community level.
RESUMEN
Tropical cyclones can significantly damage the electrical power system, so an accurate spatiotemporal forecast of outages prior to landfall can help utilities to optimize the power restoration process. The purpose of this article is to enhance the predictive accuracy of the Spatially Generalized Hurricane Outage Prediction Model (SGHOPM) developed by Guikema et al. (2014). In this version of the SGHOPM, we introduce a new two-step prediction procedure and increase the number of predictor variables. The first model step predicts whether or not outages will occur in each location and the second step predicts the number of outages. The SGHOPM environmental variables of Guikema et al. (2014) were limited to the wind characteristics (speed and duration of strong winds) of the tropical cyclones. This version of the model adds elevation, land cover, soil, precipitation, and vegetation characteristics in each location. Our results demonstrate that the use of a new two-step outage prediction model and the inclusion of these additional environmental variables increase the overall accuracy of the SGHOPM by approximately 17%.
RESUMEN
Recently, the concept of black swans has gained increased attention in the fields of risk assessment and risk management. Different types of black swans have been suggested, distinguishing between unknown unknowns (nothing in the past can convincingly point to its occurrence), unknown knowns (known to some, but not to relevant analysts), or known knowns where the probability of occurrence is judged as negligible. Traditional risk assessments have been questioned, as their standard probabilistic methods may not be capable of predicting or even identifying these rare and extreme events, thus creating a source of possible black swans. In this article, we show how a simulation model can be used to identify previously unknown potentially extreme events that if not identified and treated could occur as black swans. We show that by manipulating a verified and validated model used to predict the impacts of hazards on a system of interest, we can identify hazard conditions not previously experienced that could lead to impacts much larger than any previous level of impact. This makes these potential black swan events known and allows risk managers to more fully consider them. We demonstrate this method using a model developed to evaluate the effect of hurricanes on energy systems in the United States; we identify hurricanes with potentially extreme impacts, storms well beyond what the historic record suggests is possible in terms of impacts.
RESUMEN
There is increasing concern over deep uncertainty in the risk analysis field as probabilistic models of uncertainty cannot always be confidently determined or agreed upon for many of our most pressing contemporary risk challenges. This is particularly true in the climate change adaptation field, and has prompted the development of a number of frameworks aiming to characterize system vulnerabilities and identify robust alternatives. One such methodology is robust decision making (RDM), which uses simulation models to assess how strategies perform over many plausible conditions and then identifies and characterizes those where the strategy fails in a process termed scenario discovery. While many of the problems to which RDM has been applied are characterized by multiple objectives, research to date has provided little insight into how treatment of multiple criteria impacts the failure scenarios identified. In this research, we compare different methods for incorporating multiple objectives into the scenario discovery process to evaluate how they impact the resulting failure scenarios. We use the Lake Tana basin in Ethiopia as a case study, where climatic and environmental uncertainties could impact multiple planned water infrastructure projects, and find that failure scenarios may vary depending on the method used to aggregate multiple criteria. Common methods used to convert multiple attributes into a single utility score can obscure connections between failure scenarios and system performance, limiting the information provided to support decision making. Applying scenario discovery over each performance metric separately provides more nuanced information regarding the relative sensitivity of the objectives to different uncertain parameters, leading to clearer insights on measures that could be taken to improve system robustness and areas where additional research might prove useful.
RESUMEN
Simulation models are widely used in risk analysis to study the effects of uncertainties on outcomes of interest in complex problems. Often, these models are computationally complex and time consuming to run. This latter point may be at odds with time-sensitive evaluations or may limit the number of parameters that are considered. In this article, we give an introductory tutorial focused on parallelizing simulation code to better leverage modern computing hardware, enabling risk analysts to better utilize simulation-based methods for quantifying uncertainty in practice. This article is aimed primarily at risk analysts who use simulation methods but do not yet utilize parallelization to decrease the computational burden of these models. The discussion is focused on conceptual aspects of embarrassingly parallel computer code and software considerations. Two complementary examples are shown using the languages MATLAB and R. A brief discussion of hardware considerations is located in the Appendix.
RESUMEN
In August 2012, Hurricane Isaac, a Category 1 hurricane at landfall, caused extensive power outages in Louisiana. The storm brought high winds, storm surge, and flooding to Louisiana, and power outages were widespread and prolonged. Hourly power outage data for the state of Louisiana were collected during the storm and analyzed. This analysis included correlation of hourly power outage figures by zip code with storm conditions including wind, rainfall, and storm surge using a nonparametric ensemble data mining approach. Results were analyzed to understand how correlation of power outages with storm conditions differed geographically within the state. This analysis provided insight on how rainfall and storm surge, along with wind, contribute to power outages in hurricanes. By conducting a longitudinal study of outages at the zip code level, we were able to gain insight into the causal drivers of power outages during hurricanes. Our analysis showed that the statistical importance of storm characteristic covariates to power outages varies geographically. For Hurricane Isaac, wind speed, precipitation, and previous outages generally had high importance, whereas storm surge had lower importance, even in zip codes that experienced significant surge. The results of this analysis can inform the development of power outage forecasting models, which often focus strictly on wind-related covariates. Our study of Hurricane Isaac indicates that inclusion of other covariates, particularly precipitation, may improve model accuracy and robustness across a range of storm conditions and geography.
RESUMEN
The U.S. federal government regulates the reliability of bulk power systems, while the reliability of power distribution systems is regulated at a state level. In this article, we review the history of regulating electric service reliability and study the existing reliability metrics, indices, and standards for power transmission and distribution networks. We assess the foundations of the reliability standards and metrics, discuss how they are applied to outages caused by large exogenous disturbances such as natural disasters, and investigate whether the standards adequately internalize the impacts of these events. Our reflections shed light on how existing standards conceptualize reliability, question the basis for treating large-scale hazard-induced outages differently from normal daily outages, and discuss whether this conceptualization maps well onto customer expectations. We show that the risk indices for transmission systems used in regulating power system reliability do not adequately capture the risks that transmission systems are prone to, particularly when it comes to low-probability high-impact events. We also point out several shortcomings associated with the way in which regulators require utilities to calculate and report distribution system reliability indices. We offer several recommendations for improving the conceptualization of reliability metrics and standards. We conclude that while the approaches taken in reliability standards have made considerable advances in enhancing the reliability of power systems and may be logical from a utility perspective during normal operation, existing standards do not provide a sufficient incentive structure for the utilities to adequately ensure high levels of reliability for end-users, particularly during large-scale events.
RESUMEN
Wind power is becoming an increasingly important part of the global energy portfolio, and there is growing interest in developing offshore wind farms in the United States to better utilize this resource. Wind farms have certain environmental benefits, notably near-zero emissions of greenhouse gases, particulates, and other contaminants of concern. However, there are significant challenges ahead in achieving large-scale integration of wind power in the United States, particularly offshore wind. Environmental impacts from wind farms are a concern, and these are subject to a number of on-going studies focused on risks to the environment. However, once a wind farm is built, the farm itself will face a number of risks from a variety of hazards, and managing these risks is critical to the ultimate achievement of long-term reductions in pollutant emissions from clean energy sources such as wind. No integrated framework currently exists for assessing risks to offshore wind farms in the United States, which poses a challenge for wind farm risk management. In this "Perspective", we provide an overview of the risks faced by an offshore wind farm, argue that an integrated framework is needed, and give a preliminary starting point for such a framework to illustrate what it might look like. This is not a final framework; substantial work remains. Our intention here is to highlight the research need in this area in the hope of spurring additional research about the risks to wind farms to complement the substantial amount of on-going research on the risks from wind farms.
Asunto(s)
Medición de Riesgo , Viento , Estados UnidosRESUMEN
Count data are pervasive in many areas of risk analysis; deaths, adverse health outcomes, infrastructure system failures, and traffic accidents are all recorded as count events, for example. Risk analysts often wish to estimate the probability distribution for the number of discrete events as part of doing a risk assessment. Traditional count data regression models of the type often used in risk assessment for this problem suffer from limitations due to the assumed variance structure. A more flexible model based on the Conway-Maxwell Poisson (COM-Poisson) distribution was recently proposed, a model that has the potential to overcome the limitations of the traditional model. However, the statistical performance of this new model has not yet been fully characterized. This article assesses the performance of a maximum likelihood estimation method for fitting the COM-Poisson generalized linear model (GLM). The objectives of this article are to (1) characterize the parameter estimation accuracy of the MLE implementation of the COM-Poisson GLM, and (2) estimate the prediction accuracy of the COM-Poisson GLM using simulated data sets. The results of the study indicate that the COM-Poisson GLM is flexible enough to model under-, equi-, and overdispersed data sets with different sample mean values. The results also show that the COM-Poisson GLM yields accurate parameter estimates. The COM-Poisson GLM provides a promising and flexible approach for performing count data regression.
Asunto(s)
Modelos Lineales , Medición de Riesgo/estadística & datos numéricos , Sesgo , Bases de Datos Factuales , Humanos , Funciones de Verosimilitud , Distribución de Poisson , Análisis de RegresiónRESUMEN
This article compares statistical methods for modeling power outage durations during hurricanes and examines the predictive accuracy of these methods. Being able to make accurate predictions of power outage durations is valuable because the information can be used by utility companies to plan their restoration efforts more efficiently. This information can also help inform customers and public agencies of the expected outage times, enabling better collective response planning, and coordination of restoration efforts for other critical infrastructures that depend on electricity. In the long run, outage duration estimates for future storm scenarios may help utilities and public agencies better allocate risk management resources to balance the disruption from hurricanes with the cost of hardening power systems. We compare the out-of-sample predictive accuracy of five distinct statistical models for estimating power outage duration times caused by Hurricane Ivan in 2004. The methods compared include both regression models (accelerated failure time (AFT) and Cox proportional hazard models (Cox PH)) and data mining techniques (regression trees, Bayesian additive regression trees (BART), and multivariate additive regression splines). We then validate our models against two other hurricanes. Our results indicate that BART yields the best prediction accuracy and that it is possible to predict outage durations with reasonable accuracy.
Asunto(s)
Tormentas Ciclónicas , Suministros de Energía Eléctrica , Electricidad , Modelos TeóricosRESUMEN
BACKGROUND: Optimizing organ yield (number of organs transplanted per donor) is a potentially modifiable way to increase the number of organs available for transplant. Models to predict the expected deceased donor organ yield have been developed based on ordinary least squares regression and logistic regression. However, alternative modeling methodologies incorporating machine learning may have superior performance compared with conventional approaches. METHODS: We evaluated the predictive accuracy of 14 machine learning models for predicting overall organ yield in a cross-validation procedure. The models were parameterized using data from the Organ Procurement and Transplantation Network database from 2000 to 2018. The inclusion criteria for the study were adult deceased donors between 18 and 84 years of age that had at least 1 organ procured for transplantation. RESULTS: A total of 89,520 donors met the inclusion criteria. Their mean (standard deviation) age was 44 (15) years, and approximately 58% were male. Our cross-validation analysis showed that a tree-based gradient boosting model outperformed the remaining 13 models. Compared with the currently used prediction models, the gradient boosting model improves prediction accuracy by reducing the mean absolute error between 3 and 11 organs per 100 donors. CONCLUSION: Our analysis demonstrated that the gradient boosting methodology had the best performance in predicting overall deceased donor organ yield and can potentially serve as an aid to assess organ procurement organization performance.
Asunto(s)
Aprendizaje Automático , Modelos Estadísticos , Recolección de Tejidos y Órganos , Obtención de Tejidos y Órganos , Adulto , Femenino , Humanos , Masculino , Persona de Mediana EdadRESUMEN
The objective of this article is to evaluate the performance of the COM-Poisson GLM for analyzing crash data exhibiting underdispersion (when conditional on the mean). The COM-Poisson distribution, originally developed in 1962, has recently been reintroduced by statisticians for analyzing count data subjected to either over- or underdispersion. Over the last year, the COM-Poisson GLM has been evaluated in the context of crash data analysis and it has been shown that the model performs as well as the Poisson-gamma model for crash data exhibiting overdispersion. To accomplish the objective of this study, several COM-Poisson models were estimated using crash data collected at 162 railway-highway crossings in South Korea between 1998 and 2002. This data set has been shown to exhibit underdispersion when models linking crash data to various explanatory variables are estimated. The modeling results were compared to those produced from the Poisson and gamma probability models documented in a previous published study. The results of this research show that the COM-Poisson GLM can handle crash data when the modeling output shows signs of underdispersion. Finally, they also show that the model proposed in this study provides better statistical performance than the gamma probability and the traditional Poisson models, at least for this data set.
RESUMEN
Hurricanes frequently cause damage to electric power systems in the United States, leading to widespread and prolonged loss of electric service. Restoring service quickly requires the use of repair crews and materials that must be requested, at considerable cost, prior to the storm. U.S. utilities have struggled to strike a good balance between over- and underpreparation largely because of a lack of methods for rigorously estimating the impacts of an approaching hurricane on their systems. Previous work developed methods for estimating the risk of power outages and customer loss of power, with an outage defined as nontransitory activation of a protective device. In this article, we move beyond these previous approaches to directly estimate damage to the electric power system. Our approach is based on damage data from past storms together with regression and data mining techniques to estimate the number of utility poles that will need to be replaced. Because restoration times and resource needs are more closely tied to the number of poles and transformers that need to be replaced than to the number of outages, this pole-based assessment provides a much stronger basis for prestorm planning by utilities. Our results show that damage to poles during hurricanes can be assessed accurately, provided that adequate past damage data are available. However, the availability of data can, and currently often is, the limiting factor in developing these types of models in practice. Opportunities for further enhancing the damage data recorded during hurricanes are also discussed.