Open-reading-frame sequence tags (OSTs) support the existence of at least 17,300 genes in C. elegans.

The genome sequences of Caenorhabditis elegans, Drosophila melanogaster and Arabidopsis thaliana have been predicted to contain 19,000, 13,600 and 25,500 genes, respectively. Before this information can be fully used for evolutionary and functional studies, several issues need to be addressed. First, the gene number estimates obtained in silico and not yet supported by any experimental data need to be verified. For example, it seems biologically paradoxical that C. elegans would have 50% more genes than Drosophilia. Second, intron/exon predictions need to be tested experimentally. Third, complete sets of open reading frames (ORFs), or "ORFeomes," need to be cloned into various expression vectors. To address these issues simultaneously, we have designed and applied to C. elegans the following strategy. Predicted ORFs are amplified by PCR from a highly representative cDNA library using ORF-specific primers, cloned by Gateway recombination cloning and then sequenced to generate ORF sequence tags (OSTs) as a way to verify identity and splicing. In a sample (n=1,222) of the nearly 10,000 genes predicted ab initio (that is, for which no expressed sequence tag (EST) is available so far), at least 70% were verified by OSTs. We also observed that 27% of these experimentally confirmed genes have a structure different from that predicted by GeneFinder. We now have experimental evidence that supports the existence of at least 17,300 genes in C. elegans. Hence we suggest that gene counts based primarily on ESTs may underestimate the number of genes in human and in other organisms.

Protein interaction mapping in C. elegans using proteins involved in vulval development.

Protein interaction mapping using large-scale two-hybrid analysis has been proposed as a way to functionally annotate large numbers of uncharacterized proteins predicted by complete genome sequences. This approach was examined in Caenorhabditis elegans, starting with 27 proteins involved in vulval development. The resulting map reveals both known and new potential interactions and provides a functional annotation for approximately 100 uncharacterized gene products. A protein interaction mapping project is now feasible for C. elegans on a genome-wide scale and should contribute to the understanding of molecular mechanisms in this organism and in human diseases.

Canine pulmonary angiotensin-converting enzyme. Physicochemical, catalytic and immunological properties.

Antiontensin-converting enzyme (peptidyldipeptide hydrolase, EC 3.4.15.1) has been solubilized from canine pulmonary particles and purified to apparent homogeneity. A value of approx. 140000 was estimated for the molecular weight of the native and the reduced, denatured forms of the enzyme. No free NH2-terminal residue was detected by the dansylation procedure. Carbohydrate accounted for 17% of the weight of the enzyme, and the major residues were galactose, mannose and N-acetylglucosamine with smaller amounts of sialic acid and fucose. Removal of sialic acid residues with neuraminidase did not alter enzymatic activity. The enzyme contained one molar equivalent of zinc. Addition of this metal reversed stimulation and inhibition of activity observed in the presence of Co2+ and Mn2+, respectively. Immunologic homology of pure dog and rabbit enzymes was demonstrable with goat antisera. Fab fragments and intact IgG antibodies displayed similar inhibition dose vs. response curves with homologous enzyme, whereas the fragments were poor inhibitors of heterologous activity compared to the holoantibodies. The canine glycoprotein was much less active than the rabbit preparation in catalyzing hydrolysis of Hip-His-Leu. In contrast, the two enzymes exhibited comparable kinetic parameters with angiotensin I as substrate.

Cloning multiple copies of a DNA segment.

A method for self-ligation of DNA segments, which is based on the rotational non-equivalence of ends produced by AvaI cleavage, has been developed. Using this method and an initiator molecule to encourage the formation of long polymers, we have obtained a plasmid containing 34 repeats of a 123-bp rat DNA segment. All of the repeats are in the same orientation, and the plasmid is quite stable. It should be possible to polymerize any DNA segment by this method. Potential uses of the procedure include production of large amounts of small, homogeneous DNAs for physical studies such as X-ray crystallography, and increasing the expression of cloned genes in bacteria.

Use of uracil DNA glycosylase to control carry-over contamination in polymerase chain reactions.

Polymerase chain reactions (PCRs) synthesize abundant amplification products. Contamination of new PCRs with trace amounts of these products, called carry-over contamination, yields false positive results. Carry-over contamination from some previous PCR can be a significant problem, due both to the abundance of PCR products, and to the ideal structure of the contaminant material for re-amplification. We report that carry-over contamination can be controlled by the following two steps: (i) incorporating dUTP in all PCR products (by substituting dUPT for dTTP, or by incorporating uracil during synthesis of the oligodeoxyribonucleotide primers; and (ii) treating all subsequent fully preassembled starting reactions with uracil DNA glycosylase (UDG), followed by thermal inactivation of UDG. UDG cleaves the uracil base from the phosphodiester backbone of uracil-containing DNA, but has no effect on natural (i.e., thymine-containing) DNA. The resulting apyrimidinic sites block replication by DNA polymerases, and are very labile to acid/base hydrolysis. Because UDG does not react with dUTP, and is also inactivated by heat denaturation prior to the actual PCR, carry-over contamination of PCRs can be controlled effectively if the contaminants contain uracils in place of thymines.

Bioassay for specific DNA sequences using a non-radioactive probe.

A novel method for detecting specific DNA sequences is described. The method uses a non-radioactive DNA probe, called a probe-vector, that can transform competent Escherichia coli cells at high efficiency only when it has hybridized to a specific DNA target, thus forming a circular, double-stranded, plasmid-like molecule. The probe-vector carries a plasmid origin of replication and a gene that confers antibiotic resistance on transformed E. coli. The output of the assay--colored bacterial colonies on an agar plate--is quantitative and proportional over a wide range of target concentrations. The utility of the probe-vector method for detecting hepatitis B virus (HBV) DNA in human serum is demonstrated. The assay can detect as little as 0.1 pg HBV DNA. The presence of an internal standard monitors DNA recovery and E. coli transformation efficiency for each sample. The assay has the potential to simultaneously measure the DNA of two or more pathogens within the same clinical sample.

DNA sequence analysis of prm-mutations of coliphage lambda.

Nucleotide sequence changes associated with mutation of the prm promoter of bacteriophage lambda have been determined. Prm-mutations have been assigned to two classes. Class I mutations appear to affect the interaction of RNA polymerase with prm; six class I mutations affect four sites, located 14, 33, 38, and 39 bp preceding the prm transcription startpoint. Class II mutations appear to owe their Prm-phenotype to a change in OR, which could prevent activation of prm by repressor. All three class II mutations are in OR 1.

Parts-per-million water vapor generating system used to simulate moisture in small integrated circuit packages.

A simple, portable system has been developed and tested for generating a known water-vapor content is selected permanent gases or gas mixtures. Parts-per-million values ranging from 250 to 20 000 are generated in a continuous flowing stream at flowrates ranging from 50 to 200 cm(3)/min. A known volume of the flowing gas can be selected to simulate the internal free volume and internal pressure of hermetically sealed packages as small as 0.04 cm(3). By using a variety of available connectors, the selected volume of gas may be transferred into the inlet system of a mass spectrometer for water-vapor calibration. Generator stabilizing time and upper flowrate limits are given along with test results when compared to a Transfer Humidity Standard.

Nucleotide sequence of the yeast plasmid.

The nucleotide sequence of the yeast DNA plasmid (2 mu circle) from Saccharomyces cerevisiae strain A364A D5 has been determined. The plasmid contains 6,318 base pairs, including two identical inverted repeats of 599 base pairs. Possible functions are suggested, and attributes of an improved vector for cloning foreign DNAs in yeast are discussed.

N6,O2'-dibutyryl cycle AMP and glucose regulate the amount of messenger RNA coding for hepatic phosphoenolpyruvate carboxykinase (GTP).

Rat liver phosphoenolpyruvate carboxykinase (GTP) (EC 4.1.1.32) mRNA was purified to 25% of total mRNA activity (greater than 50-fold enrichment) by polysome immunoprecipitation. This preparation was used as template for the synthesis of cDNA that was subsequently cloned in Escherichia coli. The resulting clones were screened by in situ hybridization and by hybrid-selected translation of phosphoenolpyruvate carboxykinase mRNA. The cDNA insert of one plasmid, pPC2, was complementary to phosphoenolpyruvate carboxykinase mRNA as determined by these screening procedures. pPC2 cDNA was 760 base pairs in length and a partial restriction enzyme map was constructed. pPC2 was labeled with 32P by nick translation and was used as a hybridization probe to quantitate phosphoenolpyruvate carboxykinase mRNA following N6,O2'-dibutyryl cAMP (Bt2cAMP) injection or glucose feeding. Bt2cAMP increased whereas glucose decreased the level of hybridizable phosphoenolpyruvate carboxykinase mRNA and in all cases the changes were proportional to the in vitro translational activities measured in a reticulocyte lysate system. The half-life of phosphoenolpyruvate carboxykinase mRNA sequences was measured by an indirect procedure involving their quantitation, by hybridization assay, during deinduction and induction. The half-life was approximately 10-40 min during deinduction by glucose or during induction stimulated by Bt2cAMP. Our data indicate that cAMP enhances some step in the generation of phosphoenolpyruvate carboxykinase mRNA.

Chemical and physical properties of lipopolysaccharide of Yersinia pestis.

Lipopolysaccharide (LPS) prepared from Yersinia pestis 195/P contained d-glucose, d-glycero-d-mannoheptose, l-glycero-d-mannoheptose, glucosamine, 3-deoxyoctulosonic acid, lipid A, beta-hydroxymyristate, acetyl, phosphate, and protein. Traces of ethanolamine, mannose, and galactose were also detected. The lipid A moiety was composed of glucosamine substituted with phosphate, amide-linked beta-hydroxymyristate, and amide-bound acetate. The absence of significant amounts of additional fatty acids indicates a lipid A structure somewhat less complex than that of other gram-negative bacteria. The sugars identified are those generally found in the "core" region of LPS from the Enterobacteriaceae, with the exception of the d-glycero-d-mannoheptose. The molecular weight of the aggregated LPS was estimated to be 1.6 x 10(8).

A mercury-thiol affinity system for rapid generation of overlapping labeled DNA fragments for DNA sequencing.

We describe an in vitro protocol for quickly generating overlapping terminal-labeled restriction fragments for DNA sequence analysis via the Maxam-Gilbert technique. The protocol involves introducing mercurated nucleotides into one end of a region to be sequenced, partial digestion with several restriction enzymes and terminal-labeling, separation of the mercurated restriction enzymes and terminal-labeling, separation of the mercurated restriction fragments from non-mercurated ones on a thiol column and resolution of the different mercurated fragments on one preparative agarose gel. The protocol was used to determine the nucleotide sequence of a 980 base pair cDNA that contains the coding region for a variable surface glycoprotein of Trypanosoma brucei. It could just as quickly and easily be used to obtain many terminal-labeled overlapping restriction fragments covering a region of several kilobases.

Serum angiotensin-converting enzyme. Isolation and relationship to the pulmonary enzyme.

Angiotensin-converting enzyme from rabbit serum was purified almost 60,000-fold to apparent homogeneity by a procedure exploiting its affinity for antibodies prepared against the enzyme from lung. The pure serum and pulmonary enzymes exhibited identical behavior during gel filtration, sucrose gradient centrifugation, and disc gel electrophoresis in the reduced, denatured state. Their catalytic properties with hippurylhistidylleucine, angiotensin I, and bradykinin as substrates were similar and their reactivity with antilung enzyme antibody was indistinguishable as examined by immunodiffusion, inhibition dose-response curves, and radioimmunoassay. Their content of fucose, mannose, galactose, and N-acetylglucosamine was also comparable; however, N-acetylneuraminic acid was much more abundant in the serum glycoprotein. This difference may reflect selective removal of sialic acid-deficient enzyme molecules from the circulation by the hepatic lectin which has been postulated to initiate the catabolic phase for plasma glycoproteins (Ashwell, G., and Morell, A.G. (1974) Adv. Enzymol. Relat. Areas Mol. Biol. 41, 91-128).

DNA cloning using in vitro site-specific recombination.

As a result of numerous genome sequencing projects, large numbers of candidate open reading frames are being identified, many of which have no known function. Analysis of these genes typically involves the transfer of DNA segments into a variety of vector backgrounds for protein expression and functional analysis. We describe a method called recombinational cloning that uses in vitro site-specific recombination to accomplish the directional cloning of PCR products and the subsequent automatic subcloning of the DNA segment into new vector backbones at high efficiency. Numerous DNA segments can be transferred in parallel into many different vector backgrounds, providing an approach to high-throughput, in-depth functional analysis of genes and rapid optimization of protein expression. The resulting subclones maintain orientation and reading frame register, allowing amino- and carboxy-terminal translation fusions to be generated. In this paper, we outline the concepts of this approach and provide several examples that highlight some of its potential.

Cloning and expression of the Pst I restriction-modification system in Escherichia coli.

Here we report the cloning and preliminary characterization of the Pst I restriction-modification system of Providencia stuartii 164. Transformants of Escherichia coli carrying the Pst I gene system inserted into the cloning vector pBR322 were selected on the basis of acquired resistance to bacteriophage lambda infection. Pst I endonuclease was detected in osmotic shock fluid from each of the resistant clones. Plasmid and chromosomal DNA from these clones could not be digested by Pst I, indicating that the gene for the corresponding modification enzyme had also been cloned and was being expressed. The smallest recombinant plasmid encoding both activities, pPst201, contains an insert of approximately 4000 base pairs. In vitro transcription studies indicate that this DNA fragment also contains the endogenous promoter(s) of the system. When pPst201 was introduced into a minicell-producing strain of E. coli, two new proteins, 32,000 and 35,000 daltons, were synthesized. We have assigned these to the Pst I modification (methylase) and restriction enzymes, respectively. The active form of the restriction enzyme is a dimer, as determined by gel filtration. Constructed transformants of P. stuartii 164 that carry the Pst I system inserted into pBR322 produce approximately 10 times more Pst I endonuclease activity than does the native strain.

Construction and analysis of recombinant DNAs containing a structural gene for rat prolactin.

Poly A-containing RNA enriched in prolactin-coding sequences was isolated from female rate pituitaries after induction with diethylstilbesterol. Double stranded cDNA was synthesized from this RNA and inserted into plasmid pBR322 at the Pst I site via the poly(dG):polyy(dC) tailing method. E. coli was transformed with this DNA and the recombinant plasmid in one of the transformants characterized in detail. About half of its 900 base pair cDNA insert was sequenced. The DNA sequence is consistent with most of the reported amino acid sequence of rat preprolactin. In addition, the recombinant plasmids in two of the other transformants appear to contain growth hormone coding sequences.