Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 20 de 41
Filtrar
1.
J Synchrotron Radiat ; 27(Pt 1): 217-221, 2020 Jan 01.
Artículo en Inglés | MEDLINE | ID: mdl-31868755

RESUMEN

Time-resolved X-ray excited optical luminescence (TR-XEOL) was developed successfully for the 23A X-ray nanoprobe beamline located at the Taiwan Photon Source (TPS). The advantages of the TR-XEOL facility include (i) a nano-focused X-ray beam (<60 nm) with excellent spatial resolution and (ii) a streak camera that can simultaneously record the XEOL spectrum and decay time. Three time spans, including normal (30 ps to 2 ns), hybrid (30 ps to 310 ns) and single (30 ps to 1.72 µs) bunch modes, are available at the TPS, which can fulfil different experimental conditions involving samples with various lifetimes. It is anticipated that TR-XEOL at the TPS X-ray nanoprobe could provide great characterization capabilities for investigating the dynamics of photonic materials.

2.
Appl Opt ; 58(32): 8914-8919, 2019 Nov 10.
Artículo en Inglés | MEDLINE | ID: mdl-31873669

RESUMEN

An artificial subwavelength dielectric metalens (ML), the realization of being ultrathin and light-weight, provides a potential candidate with replacing a traditional bulky curved lens with a high image quality. A ML with 1.5 mm in diameter having numerical aperture (NA) $\sim{0.60}$∼0.60 at the near-infrared wavelength of $\lambda = 0.94 \,\,{\unicode{x00B5}{\rm m}}$λ=0.94µm was designed by the finite-difference time-domain (FDTD) method with speeding up optimization of the MLs' scheme by the deep neural network (DNN) model. Additionally, an ultrathin high NA ML was achieved by cost effective semiconductor manufacturing technology. The fabricated ML can focus an incident light down to a spot as small as $ \sim{5.2}\,\,{\rm \unicode{x00B5}{\rm m}} $∼5.2µm with high optical efficiency of $\sim{88.4}\% $∼88.4% (focusing efficiency achieved, 23.7%). We also provided an efficient MLs' semiconductor manufacturing technology for the development of an optical device in near-infrared image technology.

3.
Opt Express ; 26(3): 2731-2739, 2018 Feb 05.
Artículo en Inglés | MEDLINE | ID: mdl-29401809

RESUMEN

Polarization-dependent hard X-ray excited optical luminescence (XEOL) was used to study not only the optical properties but also the crystallographic orientations of a non-polar a-plane ZnO wafer. In addition to a positive-edge jump and extra oscillations in the near-band-edge (NBE) XEOL yield, we observed a blue shift of the NBE emission peak that follows the polarization-dependent X-ray absorption near-edge structure (XANES) as the X-ray energy is tuned across the Zn K-edge. This NBE blue shift is caused by the larger X-ray absorption, generating higher free carriers to reduce the exciton-LO phonon coupling, which causes a decrease in the exciton activation energy. The extra oscillations in XANES and XEOL as the polarization is set parallel to the c-axis is attributed to simultaneous excitations of the Zn 4p - O 2pπ -bond along the c-axis and the bilayer σ-bond, whereas only the σ-bond is excited when the polarization is perpendicular to the c-axis. The polarization-dependent XEOL spectra can be used to determine the crystallographic orientations.

4.
Opt Lett ; 41(7): 1616-9, 2016 Apr 01.
Artículo en Inglés | MEDLINE | ID: mdl-27192301

RESUMEN

Phase recovery by solving the transport-of-intensity equation (TIE) is a non-iterative and non-interferometric phase retrieval technique. From solving the TIE with conventional, one partial derivative and Hilbert transform methods for both the periodic and aperiodic samples, we demonstrate that the Hilbert transform method can provide the smoother phase images with edge enhancement and fine structures. Furthermore, compared with the images measured by optical and atomic force microscopy, the Hilbert transform method has the ability to quantitatively map out the phase images for both the periodic and aperiodic structures.

5.
Opt Express ; 23(19): 24974-83, 2015 Sep 21.
Artículo en Inglés | MEDLINE | ID: mdl-26406697

RESUMEN

We study the spatially localized dark state, called dark soliton, in a one-dimensional system of the non-resonantly pumped microcavity-polariton condensate (MPC). From the recent work by Xue and Matuszewski [Phys. Rev. Lett. 112, 216401 (2014)], we know that the dark soliton in the pure MPC system is unstable. But we find that a dark soliton pinned by a defect in the impure MPC becomes a gray soliton and can be stabilized by the presence of a defect. Moreover, the stable regime of the gray soliton is given in terms of the defect strength and pump parameter.

6.
Opt Lett ; 40(13): 2969-72, 2015 Jul 01.
Artículo en Inglés | MEDLINE | ID: mdl-26125344

RESUMEN

Single-mode selection is realized for hard x-ray cavity resonance using a three-mirror crystal device. The developed device consists of two coupled Si Fabry-Perot resonators (FPRs) and uses (12 4 0) backward diffraction to reflect back and forth the incident 14.4388 keV x-ray beam. The coupling between the two cavities gives an effective single-mode spectrum with a bandwidth of 0.81 meV. This method can be used to enhance the longitudinal coherent length without affecting transverse coherence, and is potentially useful in generating nearly total coherent beams in synchrotron or free-electron laser facilities.

7.
J Opt Soc Am A Opt Image Sci Vis ; 32(10): 1870-5, 2015 Oct 01.
Artículo en Inglés | MEDLINE | ID: mdl-26479940

RESUMEN

We adopted a finite-difference time-domain (FDTD) scheme to simulate the dynamics and diffraction of exciton-polaritons, governed by the coupling of polarization waves with electromagnetic waves. The polarization wave, an approximate solution to the Schrödinger's equation at low frequencies, essentially captures the exciton behavior. Numerical stability of the scheme is analyzed and simple examples are provided to prove its validity. The system considered is both temporally and spatially dispersive, for which the FDTD analysis has attracted less attention in the literature. Here, we demonstrate that the FDTD scheme could be useful for studying the optical response of the exciton-polariton and its dynamics. The diffraction of a polariton wave from a polaritonic grating is also considered, and many sharp resonances are found, which manifest the interference effect of polariton waves. This illustrates that the measurement of transmittance or reflectance near polariton resonance can reveal subwavelength features in semiconductors, which are sensitive to polariton scattering.

8.
Opt Express ; 22(11): 12880-9, 2014 Jun 02.
Artículo en Inglés | MEDLINE | ID: mdl-24921485

RESUMEN

Broadband graphene oxide/PVA films were used as saturable absorbers (SAs) for mode locking erbium-doped fiber laser (EDFL) and ytterbium-doped fiber laser (YDFL) at 1.06 µm and 1.55 µm. They provide modulation depths of 3.15% and 6.2% for EDFL and YDFL, respectively. Stable self-starting mode-locked pulses are obtained for both lasers, confirming that the graphene oxide is cost-effective. We have generated mode-locked pulses with spectral width, repetition rate, and pulse duration of 0.75 nm, 9.5 MHz, and 2.7 ps. This is the shortest pulse duration directly obtained from an all-normal-dispersion YDFL with graphene-oxide saturable absorber.

9.
Opt Lett ; 38(6): 845-7, 2013 Mar 15.
Artículo en Inglés | MEDLINE | ID: mdl-23503235

RESUMEN

We report the generation of passively harmonic mode-locked pulses using a 1.06 µm semiconductor optical amplifier (SOA) in a figure-eight laser configuration operated in the all-normal-dispersion regime. Different orders of harmonic mode-locking can be obtained from 30 MHz to 12.02 GHz by changing the injection current of the SOA from 80 to 660 mA together with the adjustment of polarization controllers. The highest pulse repetition rate increases almost linearly with the SOA current. As SOA current is set to 660 mA, we obtain the intracavity power of 46 mW at the highest repetition rate of 12.02 GHz, corresponding to the 1202th harmonic of the fundamental mode-locking frequency. To our best knowledge, this is the lowest intracavity power to generate the highest repetition rate with a passively mode-locked laser in the all-normal-dispersion regime.

10.
Opt Express ; 20(5): 5530-7, 2012 Feb 27.
Artículo en Inglés | MEDLINE | ID: mdl-22418359

RESUMEN

We report on the room temperature polariton lasing and photon lasing in a ZnO-based hybrid microcavity under optical pumping. A series of experimental studies of the polariton lasing (exciton-photon detunings of δ = -119 meV) in the strong-coupling regime are discussed and compared to a photon lasing (δ = -45 meV) in the weak-coupling regime obtained in the same structure. The measured threshold power density (31.8 kW/cm2) of polariton lasing is one order of magnitude lower than that of the photon lasing (318.2 kW/cm2). In addition, the comparison between polariton lasing and photon lasing is done in terms of the linewidth broadening, blue-shift of the emission peak, and polarization.


Asunto(s)
Amplificadores Electrónicos , Rayos Láser , Óxido de Zinc/química , Diseño de Equipo , Análisis de Falla de Equipo , Fotones , Temperatura
11.
Opt Express ; 20(11): 12457-62, 2012 May 21.
Artículo en Inglés | MEDLINE | ID: mdl-22714233

RESUMEN

We report the observation of lasing action from an optically pumped gallium nitride quasicrystal nanorod arrays. The nanorods were fabricated from a GaN substrate by patterned etching, followed by epitaxial regrowth. The nanorods were arranged in a 12-fold symmetric quasicrystal pattern. The regrowth grew hexagonal crystalline facets and core-shell multiple quantum wells (MQWs) on nanorods. Under optical pumping, multiple lasing peaks resembling random lasing were observed. The lasing was identified to be from the emission of MQWs on the nanorod sidewalls. The resonant spectrum and mode field of the 12-fold symmetric photonic quasicrystal nanorod arrays is discussed.


Asunto(s)
Galio/química , Rayos Láser , Nanopartículas/química , Nanopartículas/ultraestructura , Nanotecnología/instrumentación , Diseño de Equipo , Análisis de Falla de Equipo
12.
Opt Express ; 19(22): 21109-15, 2011 Oct 24.
Artículo en Inglés | MEDLINE | ID: mdl-22108962

RESUMEN

We demonstrate a single frequency diode-pumped Nd:GdVO(4) laser at 1070 nm using a volume Bragg grating as the output coupler of a short plano-concave cavity. The TEM(00) output had a maximum power of 300 mW and a linewidth less than 23 MHz. The beam propagation parameter M2 and the divergence angle at 200 mW were 1.2 and 0.37°, respectively. The single frequency tuning range was 5.1 GHz at 100 mW. Upon locking the laser frequency to a confocal reference cavity, a relative stability of 7.58 kHz was achieved. If frequency doubled, such as using a periodically-poled lithium niobate (PPLN) crystal, this laser offers an excellent light source for parity non-conservation experiments of atomic thallium.

13.
Opt Express ; 19(5): 4101-12, 2011 Feb 28.
Artículo en Inglés | MEDLINE | ID: mdl-21369239

RESUMEN

Wide bandgap semiconductors are promising materials for the development of polariton-based optoelectronic devices operating at room temperature (RT). We report the characteristics of ZnO-based microcavities (MCs) in the strong coupling regime at RT with a vacuum Rabi splitting of 72 meV. The impact of scattering states of excitons on polariton dispersion is investigated. Only the lower polariton branches (LPBs) can be clearly observed in ZnO MCs since the large vacuum Rabi splitting pushes the upper polariton branches (UPBs) into the scattering absorption states in the ZnO bulk active region. In addition, we systematically investigate the polariton relaxation bottleneck in bulk ZnO-based MCs. Angle-resolved photoluminescence measurements are performed from 100 to 300 K for different cavity-exciton detunings. A clear polariton relaxation bottleneck is observed at low temperature and large negative cavity detuning conditions. The bottleneck is suppressed with increasing temperature and decreasing detuning, due to more efficient phonon-assisted relaxation and a longer radiative lifetime of the polaritons.


Asunto(s)
Refractometría/instrumentación , Óxido de Zinc/química , Campos Electromagnéticos , Diseño de Equipo , Análisis de Falla de Equipo , Ensayo de Materiales , Miniaturización , Dispersión de Radiación , Temperatura
14.
Opt Lett ; 36(7): 1284-6, 2011 Apr 01.
Artículo en Inglés | MEDLINE | ID: mdl-21479059

RESUMEN

We use a new (to our knowledge) fabrication method of a single-walled carbon nanotube (SWCNT) absorber without polymer to sustain high-power illumination. Using a series of saturable absorbers (SAs) incorporating different amounts of SWCNTs, we demonstrate mode-locking for a Nd:GdVO4 laser in the 1 µm spectral range. Continuous-wave mode-locking (CWML) pulses with a maximum output power of 3.6 W at 1063 nm and high noise extinction of 61 dB has been achieved to give the highest pulse peak power of 3.6 kW and pulse energy of 30 nJ under 15 W pumping. To our knowledge, this is the highest CWML output power with SWCNT-SAs reported. The measured nonlinear absorption of the SWCNT-SAs shows a modulation depth of ~3% with subpicosecond recovery time.

15.
Nanotechnology ; 22(45): 455203, 2011 Nov 11.
Artículo en Inglés | MEDLINE | ID: mdl-22019939

RESUMEN

We demonstrated that graphene oxide material could be used as a highly efficient saturable absorber for the Q-switched Nd:GdVO4 laser. A novel and low-cost graphene oxide (GO) absorber was fabricated by a vertical evaporation technique and high viscosity of polyvinyl alcohol (PVA) aqueous solution. A piece of GO/PVA absorber, a piece of round quartz, and an output coupler mirror were combined to be a sandwich structure passive component. Using such a structure, 104 ns pulses and 1.22 W average output power were obtained with the maximum pulse energy at 2 µJ and a slope efficiency of 17%.

16.
Opt Express ; 18(7): 7397-406, 2010 Mar 29.
Artículo en Inglés | MEDLINE | ID: mdl-20389762

RESUMEN

Direct-backward third harmonic generation (DBTHG) has been regarded as negligible or even inexistent due to the large value of wave-vector mismatch. In the past, BTHG signals were often interpreted as back-reflected or back-scattered forward-THG (FTHG). In this paper, we theoretically and experimentally demonstrate that backward third harmonic waves can be directly generated, and that their magnitude can be comparable with FTHG in nanostructures. Experimental data of DBTHG from ZnO thin films, CdSe quantum dots and Fe(3)O(4) nanoparticles agree well with simulation results based on the Green's function. An integral equation was also derived for fast computation of DBTHG in nano films. Our investigation suggests that DBTHG can be a potentially powerful tool in nano-science research, especially when combined with FTHG measurements.


Asunto(s)
Nanoestructuras/química , Nanotecnología/métodos , Óptica y Fotónica , Algoritmos , Simulación por Computador , Compuestos Férricos/química , Procesamiento de Imagen Asistido por Computador , Modelos Estadísticos , Distribución Normal , Puntos Cuánticos
17.
Nanotechnology ; 21(48): 485202, 2010 Dec 03.
Artículo en Inglés | MEDLINE | ID: mdl-21051799

RESUMEN

Two indoline dyes, coded D149 and D205, were used as the sensitizers of ZnO dye-sensitized solar cells (DSCs) with optimal energy conversion efficiencies of more than 5%, under AM 1.5 full sunlight illumination (100 mW cm( - 2)). Higher interfacial charge transfer rate and retardant fluorescence decay confirmed from transient fluorescence illustrated that D205-sensitized ZnO DSCs could possess better electron transport than D149-sensitized ZnO DSCs. The enhancement of V(oc) and J(sc) for D205-sensitized ZnO DSCs was ascribed to the effective suppression of electron recombination by extending the alkyl chain on the terminal rhodanine moiety from ethyl to octyl. The evidence of enhanced electron diffusion coefficient was further shown by electrochemical impedance spectroscopy (EIS).

18.
Opt Express ; 17(3): 1299-307, 2009 Feb 02.
Artículo en Inglés | MEDLINE | ID: mdl-19188958

RESUMEN

Modulation instability (MI) in a coupled resonator optical waveguide (CROW) and photonic-crystal waveguide (PCW) with nonlinear Kerr media was studied by using the tight-binding theory. By considering the coupling between the defects, we obtained a discrete nonlinear evolution equation and termed it the extended discrete nonlinear Schrödinger (EDNLS) equation. By solving this equation for CROWs and PCWs, we obtained the MI region and the MI gains, G(p,q), for different wavevectors of the incident plane wave (p) and perturbation (q) analytically. In CROWs, the MI region, in which solitons can be formed, can only occur for pa being located either before or after pi/2, where a is the separation of the cavities. The location of the MI region is determined by the number of the separation rods between defects and the sign of the Kerr coefficient. However, in the PCWs, pa in the MI region can exceed the pi/2. For those wavevectors close to pi/2, the MI profile, G(q), can possess two gain maxima at fixed pa. It is quite different from the results of the nonlinear CROWs and optical fibers. By numerically solving the EDNLS equation using the 4th order Runge-Kutta method to observe exponential growth of small perturbation in the MI region, we found it is consistent with our analytic solutions.

19.
Inorg Chem ; 48(19): 9180-4, 2009 Oct 05.
Artículo en Inglés | MEDLINE | ID: mdl-19722545

RESUMEN

This study reports the synthesis of morphology-controlled BaTiO(3) nanostructures such as spherical, cube-shaped and rod-shaped BaTiO(3) using a molten-salt synthesis method. This method synthesized products from a reaction of BaO/BaCO(3) and TiO(2) with a eutectic mixture of NaCl-KCl flux at 700 degrees C for 1 h. The experiment used powder X-ray diffraction, field emission scanning electron microscopy, and transmission electron microscopy to investigate the structure and morphology of the products. Moreover, the current work also provides a proposed synthetic mechanism of BaTiO(3) in the molten salt to illustrate the in situ transformation mechanism of BaTiO(3) nanostructures in the reaction. The results of the study revealed that the initial shape of the titania and the dissolution rate of the initial precursors critically determine the shapes of the final products.

20.
J Fluoresc ; 19(3): 511-6, 2009 May.
Artículo en Inglés | MEDLINE | ID: mdl-19057987

RESUMEN

Under a 980 nm laser pumping, quenching of green upconversion (UC) emission accompanied with enhancement of red UC emission observed was dominated by the energy back-transfer (EBT) process in Er(3+) and Yb(3+) co-doped PbTiO(3), BaTiO(3), and SrTiO(3) polycrystalline powders. The efficiency of the EBT process depends not only on Yb(3+) concentration but also on level match of the doped Er(3+) and Yb(3+) ions caused by the crystal fields with different symmetries. Our UC emission spectra and X-ray diffraction confirm that the centrosymmetric crystal field arising from reducing tetragonality causes level match of transition (4)S3/2-->I13/2 of Er(3+) and (2)F7/2-->(2)F5/2 of Yb(3+). This level match is responsible for enhancing red UC emission.


Asunto(s)
Erbio/química , Iterbio/química , Electricidad , Espectrometría de Fluorescencia , Temperatura , Titanio/química , Difracción de Rayos X
SELECCIÓN DE REFERENCIAS
DETALLE DE LA BÚSQUEDA