Ti-Doped AgNbO3 as Novel Dense Diffusion Barriers of Limiting Current Oxygen Sensors.

The oxygen sensors with limiting current derived from a dense diffusion barrier have an excellent advantage of detecting oxygen partial pressure by controlling the ratio of air and fuel in combustion environments. Therefore, AgNb1-xTixO3-δ (wherein x varies from 0.1 to 0.3) was prepared as such a dense diffusion barrier layer for sensor application. Among the investigated compositions as a new condensed barrier for the diffusion of sensors, AgNb1-xTixO3-δ (x = 0.1, 0.2, 0.3) exhibits oxygen ionic conductivities from 1.37 × 10-4 to 5.78 × 10-3 S·cm-1 in the temperature range of 600-900 °C and outstanding stable electrochemical properties. Herein, we employ these novel materials as dense diffusion barriers and 8 mol % zirconia stabilized by yttria (8YSZ) as a solid-state electrolyte for the fabrication of the oxygen sensors with limiting current. We observed a direct connection between the limiting current and oxygen content within the interval of 0.5-5.0 mol % at 800 °C and a low working voltage. The increase of Ti-doping amount in AgNbO3 accelerates the sensing response to oxygen gas and promotes the service life of the sensor.

Age-dependent aggregation of α-synuclein in the nervous system of gut-brain axis is associated with caspase-1 activation.

α-Synuclein (α-Syn) plays a key role in the development of Parkinson' desease (PD). As aging is acknowledged to be the greatest risk factor for PD, here we investigated α-Syn expression in the ileum, thoracic spinal cord, and midbrain of young (1-month-old), middle-aged (6-, 12-month-old) to old (18-month-old) mice. We demonstrated that both the levels of α-Syn monomers, oligomers and ratios of oligomers to monomers were increased with aging in the ileum, thoracic spinal cord, and midbrain. Whereas, the expression of tyrosine hydroxylase (TH), the rate-limiting enzyme for dopamine synthesis, was decreased with aging in the midbrain. We failed to find corresponding α-Syn mRNA increase with aging. However, we found an increased expression of caspase-1 in the ileum, thoracic spinal cord, and midbrain. A specific caspase-1 inhibitor VX765 significantly reduced levels of both the α-Syn monomers and oligomers triggered by the rotenone in vitro. Taken together, the increase in α-Syn aggregation with aging might not occur first in the gut, but simultaneously in the nervous system of gut-brain axis. The mechanism of the age-dependent aggregation of α-Syn in nervous system is likely triggered by the aging-related caspase-1 activation.

Elucidating the Phase Transformation and Metallization Behavior of Zinc Phosphide under High Pressure.

Among the family of II3V2-type compounds, zinc phosphide (Zn3P2) occupies a unique position. As one of the most promising semiconductors well-suited for photovoltaic applications, Zn3P2 has attracted considerable attention. The stability of its structure and properties are of great interest and importance for science and technology. Here, we systematically investigate the pressurized behavior of Zn3P2 using in situ synchrotron radiation angle-dispersive X-ray diffraction (ADXRD) and in situ electrical resistance measurement under high pressure. The ADXRD experiment shows that Zn3P2 undergoes an irreversible structural phase transition under high pressure, beginning at 11.0 GPa and being completed at ∼17.7 GPa. Consistently, the high-pressure electrical resistance measurement reveals a pressure-induced semiconductor-metal transition for Zn3P2 near 11.0 GPa. The kinetics of the phase transition is also studied using in situ electrical resistance measurement and can be well described by the classical Avrami model. What's more, the new high-pressure structure of Zn3P2 is refined to be orthorhombic with space group Pmmn; the lattice parameters and bulk modulus of this high-pressure phase are determined as a = 3.546 Å, b = 5.004 Å, c = 3.167 Å, and B0 = 126.3 GPa. Interestingly, we also predict a possible structural phase transformation of orthorhombic phase (Pmmn) to cubic phase (P4232) during the decompression process; this cubic Zn3P2 is metastable at ambient conditions. These experimental results reveal the unexpected high-pressure structural behaviors and electrical properties of Zn3P2, which could help to promote the further understanding and the future applications of Zn3P2 as well as other II3V2 compounds.

Baicalein inhibits α-synuclein oligomer formation and prevents progression of α-synuclein accumulation in a rotenone mouse model of Parkinson's disease.

Parkinson's disease (PD) is a progressive neurodegenerative disease. α-Synuclein (α-syn) oligomers play a critical role in the progression of PD. Baicalein, a typical flavonoid compound, can inhibit the formation of the α-syn oligomers, and disaggregate existing α-syn oligomers in vitro. However, whether baicalein could inhibit or disaggregate α-syn oligomers in vivo has not been investigated. Therefore, this study was designed to investigate the inhibitory effects of baicalein on α-syn oligomers in vivo and to explore the possible mechanisms of such inhibition. A chronic PD mouse model was created by continuous intragastric administration of rotenone (5mg/kg, 12weeks). Baicalein (100mg/kg) was intraperitoneally injected from 7week to 12week. Our result showed that the amount of α-syn, changes in the levels of the striatal neurotransmitters, and the behavioral changes found in the chronic PD mouse model were prevented after the baicalein injections. Although baicalein did not decrease α-syn mRNA expression, α-syn oligomers were significantly decreased in the ileum, thoracic spinal cord, and midbrain. Furthermore, transmission electron microscopy analysis showed that baicalein could prevent α-syn monomers from the oligomer formation in vitro. Taken together, these results suggest that baicalein could prevent the progression of α-syn accumulation in PD mouse model partly by inhibiting formation of the α-syn oligomers.

Lower serum uric acid levels in cerebral amyloid angiopathy: a pilot study.

Cerebral amyloid angiopathy (CAA) is a common degenerative disease presenting intracerebral hemorrhage (ICH) in older people. Uric acid (UA) is a natural antioxidant, and may have a beneficial role in neurodegenerative diseases. Nevertheless, the role of UA in CAA remains unknown. In the present study, we compared serum UA levels in CAA-associated ICH patients (n = 82) and age/sex-matched controls (n = 82). Serum UA levels in possible CAA were significantly decreased when compared with healthy controls (232.68 ± 77.70 vs. 309.42 ± 59.83 µmol/L; p < 0.001). Furthermore, UA levels in patients clinically diagnosed as probable CAA were significantly lower than those in patients diagnosed as possible CAA (193.06 ± 56.98 vs. 232.68 ± 77.70 µmol/L; p = 0.014). These differences were still significant after adjusting for renal function and dyslipidemia (p < 0.001 and p = 0.002, respectively). However, there were no associations between serum UA levels and the distribution of hemorrhagic lesion, as well as neurological impairment. Our observations indicate that serum UA levels were decreased in CAA patients. UA might play a neuroprotective role in CAA and serve as a potential biomarker for reflecting the severity of Aß deposition.

Comparing the antioxidation and bioavailability of polysaccharides from extruded and unextruded Baijiu vinasses via in vitro digestion and fecal fermentation.

Extrusion has been proven to be a novel approach for modifying the physicochemical characteristic of Baijiu vinasses (BV) to extract polysaccharides, contributing to the sustainable development of brewing industry. However, the comparison of the bioactivity and bioavailability of extruded (EX) and unextruded (UE) BV polysaccharides was unclear, which impended the determination of the efficacy of extrusion in BV resourcing. In this study, in vitro digestion and fecal fermentation experiments were conducted to investigate the bioavailability, and the results showed that EX exhibited less variation in the monosaccharide composition and molecular weight, while exhibiting a stronger antioxidant capacity compared to UE. Moreover, during fermentation EX increased the abundance of Parasutterella and Lachnospiraceae, while UE promoted the proliferation of Bacteroides, Faecalibacterium, and Dialister, resulting in variation in short-chain fatty acids. These findings indicate that extrusion can enhance the capacity of antioxidants and bioavailability of BV polysaccharides.

Characterizing the Contribution of Functional Microbiota Cultures in Pit Mud to the Metabolite Profiles of Fermented Grains.

Elevating the flavor profile of strong flavors Baijiu has always been a focal point in the industry, and pit mud (PM) serves as a crucial flavor contributor in the fermentation process of the fermented grains (FG). This study investigated the influence of wheat flour and bran (MC and FC) as PM culture enrichment media on the microbiota and metabolites of FG, aiming to inform strategies for improving strong-flavor Baijiu flavor. Results showed that adding PM cultures to FG significantly altered its properties: FC enhanced starch degradation to 51.46% and elevated reducing sugar content to 1.60%, while MC increased acidity to 2.11 mmol/10 g. PM cultures also elevated FG's ester content, with increases of 0.36 times for MC-FG60d and 1.48 times for FC-FG60d compared to controls, and ethyl hexanoate rising by 0.91 times and 1.39 times, respectively. Microbial analysis revealed that Lactobacillus constituted over 95% of the Abundant bacteria community, with Kroppenstedtia or Bacillus being predominant among Rare bacteria. Abundant fungi included Rasamsonia, Pichia, and Thermomyces, while Rare fungi consisted of Rhizopus and Malassezia. Metagenomic analysis revealed bacterial dominance, primarily consisting of Lactobacillus and Acetilactobacillus (98.80-99.40%), with metabolic function predictions highlighting genes related to metabolism, especially in MC-FG60d. Predictions from PICRUSt2 suggested control over starch, cellulose degradation, and the TCA cycle by fungal subgroups, while Abundant fungi and bacteria regulated ethanol and lactic acid production. This study highlights the importance of PM cultures in the fermentation process of FG, which is significant for brewing high-quality, strong-flavor Baijiu.

Revealing the influence of exogenously inoculated Bacillus spp. on the microbiota and metabolic potential of medium-temperature Daqu: A meta-omics analysis.

To determine the unique contribution of the bioturbation to the properties of the medium-temperature Daqu, we investigated the differences in microbiota and metabolic composition using the meta-omics approach. Bioturbation increased the amounts of microbial specie and influenced the contribution of the core microbiota to the metabolome. Specifically, inoculated synthetic microbiota (MQB) enhanced the abundance of Bacillus amyloliquefaciens, while Bacillus licheniformis (MQH) increased the abundance of the two Aspergillus species and four species level of lactic acid bacteria. These changes of the microbial profiles significantly increased the potentials of carbohydrate metabolism, amino acid metabolism, and biosynthesis of ester compounds. Consequently, both patterns significantly increased the content of volatile compounds and free amino acids, which were 27.61% and 21.57% (MQB), as well as 15.14% and 17.83% (MQH), respectively. In addition, the contents of lactic acid in MQB and MQH decreased by 65.42% and 42.99%, respectively, closely related to the up- or down-regulation of the expression of their corresponding functional enzyme genes. These results suggested that bioturbation drove the assembly of the core microbiota, rather than becoming critical functional species. Overall, our study provides new insights into the functional role of exogenous isolates in the Daqu microecosystem.

Facile Synthesis of Ce-MOF for the Removal of Phosphate, Fluoride, and Arsenic.

Ce-MOF was synthesized by a solvothermal synthesis method and was used to simultaneously remove phosphate, fluoride and arsenic (V) from water by adsorption. Ce-MOF was characterized by a nitrogen adsorption-desorption isotherm, scanning electron microscopy, and infrared spectroscopy. The effects of initial concentration, adsorption time, adsorption temperature, pH value and adsorbent on the adsorption properties were investigated. A Langmuir isotherm model was used to fit the adsorption data, and the adsorption capacity of phosphate, fluoride, and arsenic (V) was calculated to be 41.2 mg·g-1, 101.8 mg·g-1 and 33.3 mg·g-1, respectively. Compared with the existing commercially available CeO2 and other MOFs, Ce-MOF has a much higher adsorption capacity. Furthermore, after two reuses, the performance of the adsorbent was almost unchanged, indicating it is a stable adsorbent and has good application potential in the field of wastewater treatment.

Obtaining non-digestible polysaccharides from distillers' grains of Chinese baijiu after extrusion with enhanced antioxidation capability.

Distillers' grains of Chinese Baijiu (DGS) presents a significant challenge to the environmentally-friendly production of the brewing industry. This study utilized screw extrusion to modify the morphological and crystalline characteristics of DGS, resulting in a 316 % increase in the yield of non-digestible polysaccharides extraction. Physiochemical characteristics of extracted polysaccharides were variated, including infrared spectrum, monosaccharide composition, and molecular weight. Polysaccharides extracted from extruded DGS exhibited enhanced inhibitory capacity on α-amylase activity and starch hydrolyzation, as compared to those extracted from unextruded DGS. Additionally, the ABTS, DPPH, and OH radical scavenging efficiencies took a maximum increase of 1.20, 1.38, and 1.02-fold, correspondingly. Extrusion is a novel approach for the recycling non-digestible polysaccharides from DGS, augmenting the bioactivity of extracts and their potential application in functional food.

An inferential procedure for the probability of passing the USP dissolution test.

Dissolution is one of the tests that is required and specified by the United States Pharmacopeia and National Formulary (USP/NF) to ensure that the drug products meet the standards of the identity, strength, quality, purity, and stability. The sponsors also establish the in-house specifications for the mean and standard deviation of the dissolution rates to guarantee a high probability of passing the USP/NF dissolution test. However, the USP/NF dissolution test is a complicated three-stage sampling plan that involves both the sample mean dissolution rate of all units and the dissolution rate of individual units. It turns out that the true probability of passing the USP/NF dissolution is formidable to compute analytically even when the population mean and variance of dissolution rates are known. It is not clear that previously proposed methods are the estimators of the true probability for passing the USP dissolution test. Therefore, we propose to employ a parametric bootstrap method in conjunction with the Monte Carlo simulation to obtain the sampling distribution of the estimated probabilities of passing the USP/NF dissolution test and hence the confidence interval for the passing probability. In addition, a procedure is proposed to test whether the true probability of passing the USP/NF dissolution test is greater than some specified value. A numerical example illustrates the proposed method. Copyright © 2011 John Wiley & Sons, Ltd.

Powder conductor for pressure calibration applied to large volume press under high pressure.

Pressure is the core of high-pressure science and technology, and the accuracy of pressure calibration is of much importance for high-pressure experiments and production. Although the pressure limit of the large volume press (LVP) continues to increase, there are no well solutions for in situ pressure calibration. In this study, using in situ high-pressure electrical performance measurement technology, two ideal calibration standard materials in powder conductors, cadmium phosphide (Cd3P2) and zinc telluride (ZnTe) with stable physical and chemical properties and obvious resistance change, are applied to pressure calibration in the LVP. In situ high-pressure synchrotron radiation x-ray diffraction was used to verify the phase transition pressure point of Cd3P2. The introduction of powder conductors for pressure calibration commits to establish a pressure system, which is safer, more stable to operate, and more accurate in experimental measurements for the LVP.

Efficient generation of neural stem cell-like cells from rat adipose derived stem cells after lentiviral transduction with green fluorescent protein.

Neural stem cells (NSCs) can be isolated from nervous tissues or derived from embryonic stem cells. However, their procurement for clinical applications is limited, and there is a need for alternative types of cell that have NSCs properties. In the present study, the differentiation potential of rat adipose-derived stem cells (ADSCs) was evaluated by infecting these cells with a lentiviral vector-encoding green fluorescent protein (GFP). ADSCs transduced with lentivirus were able to generate NSC-like cells, without any effects on their growth, phenotype, and normal differentiation potential. NSC-like cells derived from ADSCs formed neurospheres and expressed high levels of the neural progenitor marker nestin. In the absence of selected growth factors, these neurospheres differentiated into neurons expressing NeuN and MAP2 and GFAP-expressing glia, as determined by immunocytochemistry, Western blotting, and quantitative real-time polymerase chain reaction. These results demonstrate that ADSCs can be induced to generate neurospheres that have NSC-like properties and may thus constitute a potential source of cells in stem cell therapy for neurological disorders.