Novel Paraquat Detection Strategy Enabled by Carboxylatopillar[5]arene Confined in Nanochannels on a Paper-Based Sensor.

Paper-based optical sensors have emerged as a promising technology for pesticide detection and attracted extensive attention. However, in practical analytical applications, it may suffer from limited sensitivity with traditional signal amplification strategies. Here, we developed a novel mesoporous silica-modified paper-based sensor for a sensitive capture and analysis of the pesticide paraquat. Carboxylatopillar[5]arene was covalently introduced into the nanochannels for the rapid capture of target paraquat molecules due to the mass transfer confinement effect within nanopores. In addition, the large specific surface area of mesoporous silica enabled high-abundance immobilization of the capture agent and promoted its binding efficiency, which, in turn, contributed to improving the sensitivity. This work highlights the great potential of nanochannels as a development platform for sensitive paper-based sensors that can be used to develop new systems for the detection of paraquat and even other pesticides.

A Novel Virus Detection Strategy Enabled by TR512-Peptide-Based Bioorthogonal Capture and Enrichment of Preamplified Nucleic Acid.

High-cost viral nucleic acid detection devices (e.g., qPCR system) are limited resources for developing counties and rural areas, leading to underdiagnosis or even pandemics of viral infectious diseases. Herein, a novel virus detection strategy is reported. Such detection method is enabled by TR512-peptide-based biorthogonal capture and enrichment of commercially available Texas red fluorophore labeled nucleic acid on the functionalized paper. The GST-TR512 fusion protein electrostatically immobilized on the paper is constructed to retain the binding affinity of TR512-peptide toward Texas red fluorophore labeled nucleic acid released in the preamplification process, then the enrichment of analytes enhances fluorescence signal for rapid detection as volume of sample filters through the paper. The method is generally applicable to different nucleic acid preamplification strategies (PCR, RAA, CRISPR) and different virus types (Hepatitis B virus (HBV), African swine fever virus (ASFV), human papillomavirus (HPV), and severe acute respiratory syndrome coronavirus-2 (SARS-CoV-2 or 2019 nCoV)). Finally, a full-set virus detection device is developed in house to detect the presence of Hepatitis B virus (HBV) viral gene in patients' blood samples. Taken together, we first apply TR512-peptide in the signal enrichment and the novel detection strategy may offer an inexpensive, rapid, and portable solution for areas with limited access to a standard diagnosis laboratory.

The BODIPY-based chemosensor for the fluorometric determination of organochlorine pesticide dicofol.

Dicofol is an organochlorine pesticide, which is widely used in fruits, tea and other crops, and is moderately toxic to humans. Therefore, the monitoring of organochlorine pesticide-dicofol is critical for food safety. In this work, a fluorometric chemosensor based on mercaptoethanol and boron dipyrromethene (BODIPY) was first constructed to detect the dicofol. The chemosensor displayed turn-off fluorescence behavior upon dicofol with a detection limit of 200 ppb. The nucleophilicity of the glutathione and other biological thiols was studied to evaluate the reactivity of thiols with dicofol. In practical applications, an obvious color difference was observed on a paper based microfluidic device modified by phenyltriethoxysilane (PTES). We designed an integrated device for pretreatment and paper-based detection, and successfully used for the detection of dicofol in tea. The applicability was demonstrated by detection of dicofol in real tea samples with good recovery ranging from 86% to 109%. The apparatus was convenient and could be used for on-site evaluation of dicofol.

A sensitive biosensor for ochratoxin A detection based on triple-helix aptaswitch and bioorthogonal capture enabled signal amplification.

Ochratoxin A (OTA) has been classified as a possible human carcinogen and accurate monitoring of OTA is crucial for avoiding the contaminant risk. Herein, a sensitive biosensor for OTA detection was reported. This biosensor achieved a lower detection limit of 0.026 ng/mL with the linear range of 0.03-50 ng/mL, owning to the coordination of the structure-switching of the aptaswitch and bioorthogonal capture-based signal amplification of the functionalized paper. Finally it was applied in real samples precisely and a portable device was developed for the easy readout of the fluorescent signal. Notably, this approach possessed adequate simplicity with the thorough avoidance of fluorescence plate reader or complicated material modification steps for signal amplification, and it was universally applicable by replacing the aptamer sequence in the loop instead of redesigning the structure of triple-helix aptaswitch for multifarious target analytes. Taken together, we first combined the triple-helix aptaswitch and bioorthogonal capture-based signal amplification in the detection of OTA, and this novel detection method may offer a simple, cost-effective and sensitive sensing platform for agricultural products quality monitoring.

Family of Highly Luminescent Pure Ionic Copper(I) Bromide Based Hybrid Materials.

While a number of highly luminescent copper(I) halide based hybrid materials built on coordinate bonds (Cu-L; L = N, P, S-based ligands) have been obtained, the poor structural stability largely limited their commercialization. In contrast, according to the previous studies, the ionic structures (L-free) are more stable than those built on Cu-L coordinate bonds. However, the extremely weak emission hinders their optical applications. Herein, we report a tetra-alkylammonium-cation-induced strategy for the synthesis of stable and highly luminescent ionic CuBr-based hybrid materials. It is interesting to find that the tetra-alkylammonium cations with different chains could induce diverse CuBr-based anions. Moreover, most of these CuBr-based hybrids are highly luminescent, which makes them promising candidates as an alternative to phosphors and with potential applications in sensing.

Physicochemical Profiles of the Marketed Agrochemicals and Clues for Agrochemical Lead Discovery and Screening Library Development.

Combinatorial chemistry, high-throughput and virtual screening technologies have been extensively used for discovering agrochemical leads from chemical libraries. The knowledge of the physicochemical properties of the marketed agrochemicals is useful for guiding the design and selection of such libraries. Since the earlier profiling of marketed agrochemicals, the number and types of marketed agrochemicals have significantly increased. Recent studies have shown the change of some physicochemical properties of oral drugs with time. There is a need to also profile the physicochemical properties of the marketed agrochemicals. In this work, we analyzed the key physicochemical properties of 1751 marketed agrochemicals in comparison with the previously-analyzed herbicides and insecticides, 106 391 natural products and 57 548 diverse synthetic libraries compounds. Our study revealed the distribution profiles and evolution trend of different types of agrochemicals that in many respects are broadly similar to the reported profiles for oral drugs, with the most marked difference being that agrochemicals have a lower number of hydrogen bond donors. The derived distribution patterns provided the rule of thumb guidelines for selecting potential agrochemical leads and also provided clues for further improving the libraries for agrochemical lead discovery.

Kinetics and thermodynamics studies on the BMP-2 adsorption onto hydroxyapatite surface with different multi-morphological features.

The effect of the surface topography on protein adsorption process is of great significance for designing hydroxyapatite (HA) ceramic material surfaces. In this work, three different topographies of HA materials HA-sheet, HA-rod, and HA-whisker were synthesized and testified by X-ray diffraction (XRD), Fourier transform infrared (FT-IR), Brunauer-Emmett-Teller (BET) and a field emission scanning electron microscopy (FE-SEM). We have systematically investigated the adsorption kinetics and thermodynamics of bone morphogenetic proteins (BMP-2) on the three different topography surfaces of HA, respectively. The results showed that the maximum adsorption capacities of HA-sheet, HA-rod and HA-whisker were (219.96 ± 10.18), (247.13 ± 12.35), and (354.67 ± 17.73) µg · g(-1), respectively. Kinetic parameters, rate constants, equilibrium adsorption capacities and related correlation coefficients, for each kinetic model were calculated as well as discussed. It demonstrated that the adsorption of BMP-2 onto HA could be described by the pseudo second-order equation. Adsorption of BMP-2 onto HA followed the Langmuir isotherm. It confirmed that compared with other samples HA-whisker had more adsorption sites for its high specific surface area which could provide more opportunities for protein molecules. The adsorption processes were endothermic (ΔH > 0), spontaneous (ΔG < 0) and entropy increasing (ΔS > 0). A possible adsorption mechanism has been proposed. In addition, the BMP-2 could be adsorbed to the surface which existed slight conformational changes by FT-IR.