Determination of anxiolytic and antidepressant like activity of hydro alcoholic fruit extract of Pyrus communis (L.) and its impact on the memory after chronic dosing in animal models.

The purpose of this study was to evaluate the anxiolytic and antidepressant activity of ethanolic fruit extract of Pyrus communis (pear), in comparison with escitalopram in rodents (rats and mice). Thirty Wistar rats of about 200-250gm and albino mice of 25-30gm, male gender were divided into three groups each comprising of (n=10) animal respectively. Control group received distilled water, positive control received 10mg escitalopram & treated group received 200mg/kg/day of Pyrus communis ethanolic fruit extract orally for 30 days. They were evaluated by using the open field test, forced swim test (FST), plus maze test, light and dark test, hole poking test, stationary rod test, water maze test & cage crossing activity. Results were expressed as mean ± SD. Data was analyzed by using SPSS software (VERSION 21) one way ANOVA followed by Tukey test was used for post hoc analysis. Our result showed that fruit extract had significant antidepressant-like behavior in FST (p<0.001), open field (p<0.05), cage crossing (p<0.001) , significant anxiolytic activity in light and dark box test, plus-maze activity and significantly enhanced learning in water maze and stationary rod test when compared with control. The Pyrus communis fruit extract showed the anxiolytic and antidepressant-like profile in rats and mice. However, further studies need to be carried out in clinical trials for its use in different neuropsychological disorders.

Formulation development and optimization studies of mouth dissolving tablets of tizanidine HCl.

The purpose of this research was the development and optimization of mouth dissolving tablets (MDT) of Tizanidine hydrochloride using superdisintegrant. MDTs of Tizanidine (4mg) were manufactured by direct compression method. Formulations comprised of Tizanidine and excipients including croscarmellose sodium, Avicel PH 102, aspartame, orange flavor and magnesium stearate. Blends of powder were assessed for flow characterization and then compressed by direct compression. During post compression stage, a detail evaluation of tablets with respect to weight variation, hardness, thickness, disintegration time, wetting time, friability, drug content analysis, content uniformity, palatability and dissolution studies was carried out. All the formulations complied with the pharmacopeial requirements of weight, disintegration time and assay. Amongst the trial formulations F4 with concentration of croscarmellose sodium i.e. 5% was proved as best optimized due to satisfactory quality attributes such as least disintegration time and sufficient hardness. Hence, it was concluded that manufacturing of mouth dissolving tablets by addition of superdisintegrant is beneficial for treating patients with dysphagia.

Development and validation of HPLC method for the determination of Cefpodoxime Proxetil in human plasma.

A new, simple, accurate, precise and specific method has been developed for the analysis of Cefpodoxime Proxetil in human plasma. The proposed method was developed and validated with the aim to be used in Bioavailability/Bioequivalence studies for quantification of drug in human plasma. The mobile phase components were acetonitrile, methanol, and water in the ratio of 20:50:30. Ortho phosphoric acid was used to adjust at pH5.0. Flow rate and wavelength were kept 1ml/min and 247nm respectively. The column was C-18 HPLC column 5um particle size, L x 1.d. 25cm x4.6mm. (Supelcosil). Retention time of Cefpodoxime Proxetil was found to be 10.967min. The developed method was validated for selectivity, recovery, accuracy, precision, repeatability, reproducibility, stability and linearity in the range of 0.195mcg/ml to 50mcg/ml. The accuracy and Precision of the proposed method were well within the predefined limits i.e. ±15% for all the calibration standards other than LLOQ (Lower Limit of Quantification) where it was well within ±20% of the nominal value. The analytical recovery was always above 89% showing satisfactory recovery. The coefficient of correlation (R2 ) was 0.999. The developed method was found suitable for the estimation of Cefpodoxime Proxetil in plasma.

Impact of different organic acids on solubility enhancement of cefpodxime proxetil immediate release tablet and its stability studies.

Cefpodoxime proxetil is a third generation cephalosporin antibiotic demonstrates pH dependent solubility and is highly soluble only in acidic pH. The purpose of this investigation was to design and develop immediate release tablets of cefpodoxime proxetil by direct compression method and determine the effect of different solid buffers (organic acids) such as fumaric acid (formulations F1-F4), maleic acid (formulations M1-M4) and citric acid (formulations C1-C4) by using cefpodoxime and acid in the ratios of 4:1, 2:1, 1:1 and 1:2 to achieve pH-independent release of the drug. Physical parameters and assay were found to be within the acceptable range as prescribed in USP 36 / NF 31. In vitro dissolution studies of each formulation were performed in distilled water, USP dissolution medium, HCl buffer solution of pH 1.2, phosphate buffer solutions of pH 4.5 and 6.8 to observe the drug release. The formulations F3, F4, M4 were selected for film coating on the basis of better drug release profile, to protect the drug from chemical degradation through hydrolysis. Film coated formulation F3, F4 and M4 showed a remarkable in vitro release of the drug (72.88±0.43 to 92.67±0.71%) within 30min of observation in all dissolution media and further evaluated by model independent and model dependent approaches. The drug release was found to be best fit to Weibull model as highest r2adjusted (0.924-0.998) and lowest AIC (18.416-54.710) values were obtained in all dissolution media. R Gui® applied for stability studies of F3 and F4 formulations, showing shelf lives of 28 & 27months at ambient and 33 months at accelerated temperatures. Formulation F4 was chosen as best formulation on the basis of physical properties, highest dissolution rate and stability studies.

Formulation and stability evaluation of immediate release antioxidant tablet.

Oxidative stress plays an important part in the development of human diseases. Pharmaceutical strategies are required to be work out in order to fight against such oxidative damages. Designing of new formulations that can protect human beings from the undesirable effects, consequence of oxidative stress, the crucial cellular and molecular processes, along with recurring oxidative damage and diseases is to be expedited. The main objective of present work was to design a rapidly releasing synthetic antioxidant tablet dosage form comprising of vitamin A, vitamin C, vitamin E and zinc in combination with lecithin (a phospho-lipid) that can fulfill human health and nutritional requirement and to perform stability studies. Beside active ingredients, the excipients used in present formulation were; Avicel pH 102, starch pregelatinized, silicon dioxide colloidal and polyethylene glycol 8000 milled magnesium stearate, acid stearic fine powder and aq.opa dry coating material. The immediate release formulation of antioxidant was prepared by wet granulation method. Three different trials were developed. Vitamin C was selected as tracer for detection and evaluation of tablet dosage form. When the resulting formulation was evaluated by USP 24 / NF 19, 2000 guidelines and later by stability studies, it was found that their quality can be maintained over a storage period of 24 months.

Physico-chemical comparison of famotidine tablets prepared via dry granulation and direct compression techniques.

Famotidine is generally employed for the treatment of gastric ulcer. The present study was conducted to fabricate famotidine tablets using various diluents. The binder was incorporated to the formulations in different proportions. Both the dry granulation and direct compression techniques were employed to develop the tablets. Physical evaluation of tablets i.e. tablets hardness, friability, weight variation, thickness and diameter was determined. In vitro dissolution studies of the prepared tablets were carried out for 60 min using the USP apparatus II and 900 ml 0.1 M HCl stirred at 37 ± 0.5°C with a speed of 50 rpm. Physical analysis of tablets prepared via direct compression showed satisfactory results regarding the weight variation, hardness and friability, since their respective values were within the BP limits. All the prepared famotidine tablets exhibited diffusion based mode of drug release. 100% release of drug occurred in less than 60 min. The drug release from all the formulated tablets has elaborated the involvement of diffusion (Higuchian drug release). This comparative study exhibited that physical parameters of tablets are affected by the technique of tabletting.

Report: Studies on antibacterial activity of some traditional medicinal plants used in folk medicine.

Ethanolic extracts of eight medicinal plants commonly used in folk medicine were tested for their antibacterial activity against four Gram positive strains (Bacillus subtilis, Staphylococcus aureus, Staphylococcus epidermidis and, Streptococcus pneumoniae) and six Gram negative strains (Escherichia coli, Proteus vulgaris, Proteus mirabilis. Salmonella typhi para A, Salmonella typhi para B and Shigella dysenteriae) that were obtained from different pathological laboratories located in Karachi, Pakistan. Disc diffusion method was used to analyze antibacterial activity. Out of eight, five medicinal plants showed antibacterial activity against two or more than two microbial species. The most effective antimicrobial plant found to be Punica granatum followed by Curcuma zedoaria Rosc, Grewia asiatica L and Carissa carandas L, Curcuma caesia Roxb respectively. From these results, it is evident that medicinal plants could be used as a potential source of new antibacterial agents.

Formulation design and evaluation of Cefuroxime axetil 125 mg immediate release tablets using different concentration of sodium lauryl sulphate as solubility enhancer

Cefuroxime axetil immediate release tablets were formulated by direct compression method with different percentages of sodium lauryl sulphate (SLS) such as 0.5, 1.0, 1.5 and also without SLS. Resulting batches of tablets were evaluated by both pharmacopeial and non-pharmacopeial methods to ascertain the physico-mechanical properties. Dissolution test were carried out in different medium like 0.07 M HCl, distilled water, 0.1M HCl of pH 1.2 and phosphate buffers at pH 4.5 and 6.8 to observe the drug release against the respective concentration of SLS used. Later, test formulations were compared by f1 (dissimilarity) and f2 (similarity) factors using a reference brand of cefuroxime axetil. Significant differences (p<0.05) in dissolution rate were recorded with the change in concentration of SLS in different media. Test formulation T3 containing 1% SLS was found to be best optimized formulation based on assay, disintegration, dissolution and similarity and dissimilarity factors.

Formularam-se comprimidos de liberação imediata à base de cefuroxima axetil, pelo método de compressão direta, com diferentes percentagens de lauril sulfato de sódio (LSS), tais como 0,5, 1,0, 1,5, e também sem SLS. Os lotes resultantes dos comprimidos foram avaliados por ambos os métodos da farmacopeia e não farmacopeicos para determinar as propriedades físico-mecânicas. O teste de dissolução foi realizado em meios diferentes, como HCl 0,07 M, água destilada, HCl 0,1 M com pH 1,2 e os tampões fosfato (pH 4,5 e 6,8) para observar a liberação do fármaco contra a correspondente concentração de LSS utilizado. Em seguida, as formulações de teste foram comparadas por fatores f1 (dissimilaridade) e f2 (similaridade), utilizando uma marca de referência de cefuroxima axetil. Diferenças significativas (p<0,05) na taxa de dissolução foram registradas com a mudança na concentração de LSS em diferentes meios de dissolução. A formulação T3 contendo LSS a 1% foi considerada a melhor formulação otimizada com base nos ensaios de desintegração, dissolução e fatores de semelhança e dissimilaridade.