Effect of Dust and Hot Spots on the Thermal Stability of Laser Sails.

Laser sails propelled by gigawatt-scale ground-based laser arrays have the potential to reach relativistic speeds, traversing the solar system in hours and reaching nearby stars in years. Here, we describe the danger interplanetary dust poses to the survival of a laser sail during its acceleration phase. We show through multiphysics simulations how localized heating from a single optically absorbing dust particle on the sail can initiate a thermal runaway process that rapidly spreads and destroys the entire sail. We explore potential mitigation strategies, including increasing the in-plane thermal conductivity of the sail to reduce the peak temperature at hot spots and isolating the absorptive regions of the sail that can burn away individually.

Fast and rigorous optical simulation of periodically corrugated light-emitting diodes based on a diffraction matrix method.

Increasing the light extraction efficiency has been widely studied for highly efficient organic light-emitting diodes (OLEDs). Among many light-extraction approaches proposed so far, adding a corrugation layer has been considered a promising solution for its simplicity and high effectiveness. While the working principle of periodically corrugated OLEDs can be qualitatively explained by the diffraction theory, dipolar emission inside the OLED structure makes its quantitative analysis challenging, making one rely on finite-element electromagnetic simulations that could require huge computing resources. Here, we demonstrate a new simulation method, named the diffraction matrix method (DMM), that can accurately predict the optical characteristics of periodically corrugated OLEDs while achieving calculation speed that is a few orders of magnitude faster. Our method decomposes the light emitted by a dipolar emitter into plane waves with different wavevectors and tracks the diffraction behavior of waves using diffraction matrices. Calculated optical parameters show a quantitative agreement with those predicted by finite-difference time-domain (FDTD) method. Furthermore, the developed method possesses a unique advantage over the conventional approaches that it naturally evaluates the wavevector-dependent power dissipation of a dipole and is thus capable of identifying the loss channels inside OLEDs in a quantitative manner.

Ultracompact electro-optic waveguide modulator based on a graphene-covered λ/1000 plasmonic nanogap.

The extreme field confinement and electro-optic tunability of plasmons in graphene make it an ideal platform for compact waveguide modulators, with device footprints aggressively scaling orders of magnitude below the diffraction limit. The miniaturization of modulators based on graphene plasmon resonances is however inherently constrained by the plasmon wavelength, while their performance is bounded by material loss in graphene. In this report, we propose to overcome these limitations using a graphene-covered λ/1000 plasmonic nanogap waveguide that concentrates light on length scales more than an order of magnitude smaller than the graphene plasmon wavelength. The modulation mechanism relies on interference between the non-resonant background transmission and the transmission mediated by the gate-tunable nanogap mode, enabling modulation depths over 20 dB. Since the operation of the device does not rely on graphene plasmons, the switching behavior is robust against low graphene carrier mobility even under 1000 cm2/Vs, which is desirable for practical applications.

Molecular characterization of Urosporidium tapetis sp. nov., a haplosporidian hyperparasite infecting metacercariae of Parvatrema duboisi (Dollfus 1923), a trematode parasite of Manila clam Ruditapes philippinarum on the west coast of Korea.

Recently, a putative new hyperparasitic haplosporidian in the genus Urosporidium was identified from metacercariae of the trematode Parvatrema duboisi infecting Manila clam Ruditapes philippinarum on the west coast of Korea. In this study, we applied small subunit ribosomal DNA (SSU rDNA) sequences as a marker to substantiate the phylogenetic relationship of the unidentified Urosporidium within the Order Haplosporida. In our phylogenetic analysis, the 1890 bp of SSU rDNA sequences obtained were closely related to a haplosporidian parasite forming a sister clade to Urosporidium group, although the gene sequences were only 89.22-89.70% similar to Urosporidium spp. Such molecular phylogenetic distance within the genus suggested that the unidentified Urosporidium is a new member of the genus. Accordingly, we report the unidentified haplosporidian hyperparasite as Urosporidium tapetis sp. nov.

Order-of-Magnitude, Broadband-Enhanced Light Emission from Quantum Dots Assembled in Multiscale Phase-Separated Block Copolymers.

Achieving high emission efficiency in solid-state quantum dots (QDs) is an essential requirement for high-performance QD optoelectronics. However, most QD films suffer from insufficient excitation and light extraction efficiencies, along with nonradiative energy transfer between closely adjacent QDs. Herein, we suggest a highly effective strategy to enhance the photoluminescence (PL) of QD composite films through an assembly of QDs and poly(styrene-b-4-vinylpyridine)) (PS-b-P4VP) block copolymer (BCP). A BCP matrix casted under controlled humidity provides multiscale phase-separation features based on (1) submicrometer-scale spinodal decomposition between polymer-rich and water-rich phases and (2) sub-10 nm-scale microphase separation between polymer blocks. The BCP-QD composite containing bicontinuous random pores achieves significant enhancement of both light absorption and extraction efficiencies via effective random light scattering. Moreover, the microphase-separated morphology substantially reduces the Förster resonance energy transfer efficiency from 53% (pure QD film) to 22% (BCP-QD composite), collectively achieving an unprecedented 21-fold enhanced PL over a broad spectral range.

Three-dimensionally patterned Ag-Pt alloy catalyst on planar Si photocathodes for photoelectrochemical H2 evolution.

Platinum is still the most active element for the hydrogen evolution reaction (HER); however, it suffers from its scarcity and high cost. Thus, significant efforts have been dedicated to maximize the catalytic activity with less loading. When Pt is utilized at a semiconductor surface, more factors have to be considered. Placing a catalyst directly in contact with a semiconductor supports the extraction of photogenerated minority carriers as well as boosts the catalytic reactions. In addition, a catalyst should be designed with prudence not to interfere in the light path with respect to absorption at the underlying substrate. Herein, we report the development of planar Si-based photocathodes, covered with a native oxide, for the HER, which also satisfy the prerequisites for the use of a three-dimensionally patterned, flower-like Ag-Pt catalyst. The catalyst consisted of nanoparticles of homogeneously alloyed Ag and Pt, fabricated by a galvanic exchange of Pt with Ag. Importantly, these two elements were proven to have their own functionalities. Ag not only contributed to transporting e- and Had to the Pt for subsequent processes of the HER but also effectively extracted minority carriers by diluting the high work function of Pt, leading to a better Schottky barrier at the catalyst-insulator-semiconductor junction. Furthermore, computational simulation revealed that the proposed catalyst pattern alleviated optical light loss with the increasing catalyst loading compared to the two-dimensional case. Owing to these effects, we could achieve 0.36 V (vs. reversible hydrogen electrode) as an open circuit potential and the near maximum current density of planar p-type Si. The findings in this work suggests deeper insights that could support the design of catalysts for solar-fuel systems.

Electronically Tunable Perfect Absorption in Graphene.

The demand for dynamically tunable light modulation in flat optics applications has grown in recent years. Graphene nanostructures have been extensively studied as means of creating large effective index tunability, motivated by theoretical predictions of the potential for unity absorption in resonantly excited graphene nanostructures. However, the poor radiative coupling to graphene plasmonic nanoresonators and low graphene carrier mobilities from imperfections in processed graphene samples have led to low modulation depths in experimental attempts at creating tunable absorption in graphene devices. Here we demonstrate electronically tunable perfect absorption in graphene, covering less than 10% of the surface area, by incorporating multiscale nanophotonic structures composed of a low-permittivity substrate and subwavelength noble metal plasmonic antennas to enhance the radiative coupling to deep subwavelength graphene nanoresonators. To design the structures, we devised a graphical method based on effective surface admittance, elucidating the origin of perfect absorption arising from critical coupling between radiation and graphene plasmonic modes. Experimental measurements reveal 96.9% absorption in the graphene plasmonic nanostructure at 1389 cm-1, with an on/off modulation efficiency of 95.9% in reflection.

Vertical stacking of three-dimensional nanostructures via an aerosol lithography for advanced optical applications.

In this report, we introduce a method utilizing ion-assisted aerosol lithography to stack 3D nanostructures vertically. The stacked 3D nanostructures exhibit extraordinary optical properties: the double layer 3D nanostructures show more than 5-fold increased surface enhanced Raman scattering intensities compared to their single layer counterpart. This unusual enhancement of Raman intensity implies the existence of additional vertical hotspots formed by interlayer cavity effects between the lower and upper nanostructures. Allowing for full three-dimensional control in nanofabrication, this work provides a reliable way to create complex-shaped advanced optical nanostructures with non-intuitive bulk optical properties.

A light-trapping strategy for nanocrystalline silicon thin-film solar cells using three-dimensionally assembled nanoparticle structures.

We report three-dimensionally assembled nanoparticle structures inducing multiple plasmon resonances for broadband light harvesting in nanocrystalline silicon (nc-Si:H) thin-film solar cells. A three-dimensional multiscale (3DM) assembly of nanoparticles generated using a multi-pin spark discharge method has been accomplished over a large area under atmospheric conditions via ion-assisted aerosol lithography. The multiscale features of the sophisticated 3DM structures exhibit surface plasmon resonances at multiple frequencies, which increase light scattering and absorption efficiency over a wide spectral range from 350-1100 nm. The multiple plasmon resonances, together with the antireflection functionality arising from the conformally deposited top surface of the 3D solar cell, lead to a 22% and an 11% improvement in power conversion efficiency of the nc-Si:H thin-film solar cells compared to flat cells and cells employing nanoparticle clusters, respectively. Finite-difference time-domain simulations were also carried out to confirm that the improved device performance mainly originates from the multiple plasmon resonances generated from three-dimensionally assembled nanoparticle structures.

Graphene field effect transistor without an energy gap.

Graphene is a room temperature ballistic electron conductor and also a very good thermal conductor. Thus, it has been regarded as an ideal material for postsilicon electronic applications. A major complication is that the relativistic massless electrons in pristine graphene exhibit unimpeded Klein tunneling penetration through gate potential barriers. Thus, previous efforts to realize a field effect transistor for logic applications have assumed that introduction of a band gap in graphene is a prerequisite. Unfortunately, extrinsic treatments designed to open a band gap seriously degrade device quality, yielding very low mobility and uncontrolled on/off current ratios. To solve this dilemma, we propose a gating mechanism that leads to a hundredfold enhancement in on/off transmittance ratio for normally incident electrons without any band gap engineering. Thus, our saw-shaped geometry gate potential (in place of the conventional bar-shaped geometry) leads to switching to an off state while retaining the ultrahigh electron mobility in the on state. In particular, we report that an on/off transmittance ratio of 130 is achievable for a sawtooth gate with a gate length of 80 nm. Our switching mechanism demonstrates that intrinsic graphene can be used in designing logic devices without serious alteration of the conventional field effect transistor architecture. This suggests a new variable for the optimization of the graphene-based device--geometry of the gate electrode.

Effect of uvulopalatopharyngoplasty on CPAP compliance.

In this retrospective cohort study, we tried to evaluate the compliance of continuous positive airway treatment (CPAP) in the patients with or without previous surgical treatment to OSAS. Retrospective study with prospectively collected data was performed. Eighty-six consecutive OSAS patients who decided to try CPAP were enrolled, and data regarding polysomnography, history of previous surgical treatment and CPAP usage were collected. Among them, nine patients who had history of uvulopalatopharyngoplasty for OSAS were included in the surgery group and another 77 non-surgical patients were assigned to the untreated group. There was no statistical difference for demographics or polysomnographic parameters. They showed similar CPAP acceptance and air leak after the first trial. However, the surgery group (6.39 ± 1.49 h/day) used CPAP significantly longer than the untreated group (4.73 ± 1.64 h/day; p = 0.007) and less troubled with 'waking up during night'. The present study showed that the prior surgery for OSAS doesn't preclude the subsequent CPAP therapy.

Sinonasal evaluation and treatment before liver transplantation: a retrospective review of 982 patients.

Immunosuppression after liver transplantation (LT) increases complications from infection. The usefulness of sinonasal evaluation before LT has not been fully evaluated. The aim of this study was to determine the usefulness of routine sinonasal evaluation before LT and pre-transplant treatment of sinusitis. The clinical records of 982 adult patients (age ≥18 years) who underwent LT between January 1997 and June 2011 were retrospectively reviewed and analyzed. A total of 920 patients (93.7 %) underwent pre-LT sinonasal evaluation, including a sinonasal symptom questionnaire, nasal endoscopy and plain X-ray. Of these patients, 269 (29.2 %) had abnormal findings and underwent paranasal CT scans. Based on CT, 102 patients, including 21 with fungal ball, were diagnosed with sinusitis and 62 (60.8 %) underwent LT after medical or surgical treatment for sinusitis. Another 40 patients (33 with sinusitis and 7 with fungal ball) underwent LT without treatment for sinusitis. No difference in infectious complications was observed according to sinusitis treatment type. Among chronic rhinosinusitis patients, those who underwent LT (n = 48) after adequate treatment had a lower mortality rate than those who did not receive treatment (n = 33) (12.5 vs. 33.3 %; p = 0.024). Sinonasal evaluation preceding LT did not prevent infectious complications but untreated sinusitis might be correlated with increased mortality after LT. Routine pre-LT sinonasal evaluation would be considered for safer transplantation.

Hybrid surface-phonon-plasmon polariton modes in graphene/monolayer h-BN heterostructures.

Infrared transmission measurements reveal the hybridization of graphene plasmons and the phonons in a monolayer hexagonal boron nitride (h-BN) sheet. Frequency-wavevector dispersion relations of the electromagnetically coupled graphene plasmon/h-BN phonon modes are derived from measurement of nanoresonators with widths varying from 30 to 300 nm. It is shown that the graphene plasmon mode is split into two distinct optical modes that display an anticrossing behavior near the energy of the h-BN optical phonon at 1370 cm(-1). We explain this behavior as a classical electromagnetic strong-coupling with the highly confined near fields of the graphene plasmons allowing for hybridization with the phonons of the atomically thin h-BN layer to create two clearly separated new surface-phonon-plasmon-polariton (SPPP) modes.

Highly confined tunable mid-infrared plasmonics in graphene nanoresonators.

Single-layer graphene has been shown to have intriguing prospects as a plasmonic material, as modes having plasmon wavelengths ~20 times smaller than free space (λp ~ λ0/20) have been observed in the 2-6 THz range, and active graphene plasmonic devices operating in that regime have been explored. However there is great interest in understanding the properties of graphene plasmons across the infrared spectrum, especially at energies exceeding the graphene optical phonon energy. We use infrared microscopy to observe the modes of tunable plasmonic graphene nanoresonator arrays as small as 15 nm. We map the wavevector-dependent dispersion relations for graphene plasmons at mid-infrared energies from measurements of resonant frequency changes with nanoresonator width. By tuning resonator width and charge density, we probe graphene plasmons with λp ≤ λ0/100 and plasmon resonances as high as 310 meV (2500 cm(-1)) for 15 nm nanoresonators. Electromagnetic calculations suggest that the confined plasmonic modes have a local density of optical states more than 10(6) larger than free space and thus could strongly increase light-matter interactions at infrared energies.

Light-Intensity Switching of Graphene/WSe2 Synaptic Devices.

2D van der Waals heterojunctions (vdWH) have emerged as an attractive platform for the realization of optoelectronic synaptic devices, which are critical for energy-efficient computing systems. Photogating induced by charge traps at the interfaces indeed results in ultrahigh responsivity and tunable photoconductance. Yet, optical potentiation and depression remain mostly modulated by gate bias, requiring relatively high energy inputs. Thus, advanced all-optical synapse switching strategies are still needed. In this work, a reversible switching between positive photoconductivity (PPC) and negative photoconductivity (NPC) is achieved in graphene/WSe2 vdWH solely through light-intensity modulation. Consequently, the graphene/WSe2 synaptic device shows tunable optical potentiation and depression behavior with an ultralow power consumption of 127 aJ. The study further unravels the complex interplay of gate bias and incident light power in determining the sign and magnitude of the photocurrent, showing the critical role of charge trapping and photogating at interfaces. Interestingly, it is found that switching between PPC to NPC can be also obtained at 0 mV drain-source voltage. Overall, the reversible potentiation/depression effect based on light intensity modulation and its combination with additional gate bias tunability is very appealing for the development of energy-efficient optical communications and neuromorphic computing.

Electrostatic steering of thermal emission with active metasurface control of delocalized modes.

We theoretically describe and experimentally demonstrate a graphene-integrated metasurface structure that enables electrically-tunable directional control of thermal emission. This device consists of a dielectric spacer that acts as a Fabry-Perot resonator supporting long-range delocalized modes bounded on one side by an electrostatically tunable metal-graphene metasurface. By varying the Fermi level of the graphene, the accumulated phase of the Fabry-Perot mode is shifted, which changes the direction of absorption and emission at a fixed frequency. We directly measure the frequency- and angle-dependent emissivity of the thermal emission from a fabricated device heated to 250 °C. Our results show that electrostatic control allows the thermal emission at 6.61 µm to be continuously steered over 16°, with a peak emissivity maintained above 0.9. We analyze the dynamic behavior of the thermal emission steerer theoretically using a Fano interference model, and use the model to design optimized thermal steerer structures.

The targeted inhibition of mitochondrial Hsp90 overcomes the apoptosis resistance conferred by Bcl-2 in Hep3B cells via necroptosis.

Previous studies have reported that a Gamitrinib variant containing triphenylphosphonium (G-TPP) binds to mitochondrial Hsp90 and rapidly inhibits its activity, thus inducing the apoptotic pathway in the cells. Accordingly, G-TPP shows a potential as a promising drug for the treatment of cancer. A cell can die from different types of cell death such as apoptosis, necrosis, necroptosis, and autophagic cell death. In this study, we further investigated the mechanisms and modes of cell death in the G-TPP-treated Hep3B and U937 cell lines. We discovered that G-TPP kills the U937 cells through the apoptotic pathway and the overexpression of Bcl-2 significantly inhibits U937 cell death to G-TPP. We further discovered that G-TPP kills the Hep3B cells by activating necroptosis in combination with the partial activation of caspase-dependent apoptosis. Importantly, G-TPP overcomes the apoptosis resistance conferred by Bcl-2 in Hep3B cells via necroptosis. We also observed that G-TPP induces compensatory autophagy in the Hep3B cell line. We further found that whereas there is a Bcl-2-Beclin 1 interaction in response to G-TPP, silencing the beclin 1 gene failed to block LC3-II accumulation in the Hep3B cells, indicating that G-TPP triggers Beclin 1-independent protective autophagy in Hep3B cells. Taken together, these data reveal that G-TPP induces cell death through a combination of death pathways, including necroptosis and apoptosis, and overcomes the apoptosis resistance conferred by Bcl-2 in Hep3B cells via necroptosis. These findings are important for the therapeutic exploitation of necroptosis as an alternative cell death program to bypass the resistance to apoptosis.

Infection of wild mullet (Mugil cephalus) with Myxobolus episquamalis in Korea.

Wild mullet (Mugil cephalus) with white cysts on their scales were obtained from Yeosu on the south coast of Korea in 2009. Cyst-like plasmodia consisted of a large number of mature myxosporean spores and numerous sporogonic stages. Spores were oval-shaped in their front view, tapering anteriorly to a blunt apex, and lenticular in their lateral view. They measured 7.0 µm (6.2-7.6) in length, 5.2 µm (4.0-6.2) in width, and 4.9 µm (3.8-6.0) in thickness. Polar capsules contained a polar filament with five to six turns and measured 3.5 µm (2.5-4.5) in length and 2.0 µm (1.6-2.3) in width. Nucleotide sequences of the 18S rRNA gene of the myxosporean parasites in our study showed 99.8 % identity with Myxobolus episquamalis Egusa, Maeno and Sorimachi, 1990 from mullet in Tunisia. These results suggest that the Myxobolus sp. found on the scales of wild mullet is M. episquamalis. In the histopathological examination, spores were observed not only in the plasmodia on the scales, but also in the intestine, pancreas, heart, kidney, stomach, gill, skin, spleen, and liver, suggesting the possibility of the coinfection by different Myxobolus species.

Design parameters of free-form color splitters for subwavelength pixelated image sensors.

Metasurface-based color splitters are emerging as next-generation optical components for image sensors, replacing classical color filters and microlens arrays. In this work, we report how the design parameters such as the device dimensions and refractive indices of the dielectrics affect the optical efficiency of the color splitters. Also, we report how the design grid resolution parameters affect the optical efficiency and discover that the fabrication of a color splitter is possible even in legacy fabrication facilities with low structure resolutions.

Production and Characterization of Monoclonal Antibodies Against Structural Proteins of Hirame Novirhabdovirus.

Hirame novirhabdovirus (HIRRV) is a significant viral pathogen of Japanese flounder (Paralichthys olivaceus). In this study, seven monoclonal antibodies (mAbs) against HIRRV (isolate CA-9703) were produced and characterized. Three mAbs (1B3, 5G6, and 36D3) were able to recognize nucleoprotein (N) (42 kDa) and four mAbs (11-2D9, 15-1G9, 17F11, and 24-1C6) recognized matrix (M) protein (24 kDa) of HIRRV. Western blot, Enzyme-linked immunosorbent assay, and indirect fluorescent antibody technique (IFAT) results indicated that the developed mAbs were specific to HIRRV without any cross-reactivity against other different fish viruses and epithelioma papulosum cyprini cells. All the mAbs comprised IgG1 heavy chain and κ light chain except 5G6, which has a heavy chain of IgG2a class. These mAbs can be very useful in development of immunodiagnosis of HIRRV infection.