Super-Nernstian pH Sensor Based on Anomalous Charge Transfer Doping of Defect-Engineered Graphene.

The conventional pH sensor based on the graphene ion-sensitive field-effect transistor (Gr-ISFET), which operates with an electrostatic gating at the solution-graphene interface, cannot have a pH sensitivity above the Nernst limit (∼59 mV/pH). However, for accurate detection of the pH levels of an aqueous solution, an ultrasensitive pH sensor that can exceed the theoretical limit is required. In this study, a novel Gr-ISFET-based pH sensor is fabricated using proton-permeable defect-engineered graphene. The nanocrystalline graphene (nc-Gr) with numerous grain boundaries allows protons to penetrate the graphene layer and interact with the underlying pH-dependent charge-transfer dopant layer. We analyze the pH sensitivity of nc-Gr ISFETs by adjusting the grain boundary density of graphene and the functional group (OH-, NH2-, CH3-) on the SiO2 surface, confirming an unusual negative shift of the charge-neutral point (CNP) as the pH of the solution increases and a super-Nernstian pH response (approximately -140 mV/pH) under optimized conditions.

Rational Design of Ultrathin Gas Barrier Layer via Reconstruction of Hexagonal Boron Nitride Nanoflakes to Enhance the Chemical Stability of Proton Exchange Membrane Fuel Cells.

Hexagonal boron nitride (hBN) has great potential as a promising gas barrier layer in proton exchange membrane fuel cells (PEMFCs) as it shows high proton conductivity as well as excellent gas-blocking capability. However, structural defects and mechanical damage during the transfer of the hBN layer and membrane swelling have limited the application of hBN sheets to PEMFCs. Here, an ultrathin gas barrier layer is successfully fabricated on a proton exchange membrane via reconstruction of mechanically exfoliated hBN nanoflakes using a direct spin-coating process. The hBN-coated layer effectively suppresses the gas crossover and inhibits the formation of reactive oxygen radicals in the electrodes without reducing the proton conductivity of the membrane. It is also demonstrated that the structural advantages of hBN-coated gas barrier layers promise high performance of a unit cell even after a open-circuit voltage (OCV) hold test for 100 h. Furthermore, through in-depth postmortem analyses, a time-dependent degradation mechanism of membrane electrode assembly under the OCV condition is rationally proposed.

Self-imagery and advertising effectiveness: the role of sense of presence.

The purpose of this study was to assess whether self-imagery is more effective than other-imagery, and if so, to investigate the mechanism of how self-imagery generates more increased positive responses from consumers. Furthermore, we explored the boundary conditions associated with reduced positive effects of self-imagery on consumer responses. The results of Experiment 1 suggest that self-imagery was more effective than other-imagery in generating a favorable attitude toward an advertisement and purchase intention, since it enhanced a sense of presence, and consequently, imagery engagement. However, based on the results of Experiment 2, when an advertisement evoked a sense of high-risk, self-imagery generated a less favorable attitude toward the advertisement than other-imagery due to the emotion of fear evoked by the advertisement.

Missed a live match? Determinants of League of Legends Champions Korea highlights viewership.

This research aims to explore the determinants of the League of Legends Champions Korea (LCK) highlight views and comment counts. The data of 629 game highlight views and comment counts for seven tournaments were collected from YouTube. The highlight views and comment counts were regressed on a series of before-the-game factors (outcome uncertainty and game quality), after-the-game factors (sum and difference of kills, assists, multiple kills, and upset results), and match-related characteristics (game duration, evening game, and clip recentness). A multi-level least square dummy variable regression was conducted to test the model. Among the before-the-game factors, outcome uncertainty and game quality were significantly associated with highlight views and comment counts. This indicated that fans liked watching games with uncertain outcomes and those involving high-quality teams. Among the after-the-game factors, an upset result was a significant determinant of esports highlight views and comment counts. Thus, fans enjoy watching underdogs win. Finally, the sum of kills and assists only affected view counts, which indicated that fans prefer watching offensive games with more kills and a solo performance rather than teamwork.

hBN Flake Embedded Al2O3 Thin Film for Flexible Moisture Barrier.

Due to the vulnerability of organic optoelectronic devices to moisture and oxygen, thin-film moisture barriers have played a critical role in improving the lifetime of the devices. Here, we propose a hexagonal boron nitride (hBN) embedded Al2O3 thin film as a flexible moisture barrier. After layer-by-layer (LBL) staking of polymer and hBN flake composite layer, Al2O3 was deposited on the nano-laminate template by spatial plasma atomic layer deposition (PEALD). Because the hBN flakes in Al2O3 thin film increase the diffusion path of moisture, the composite layer has a low water vapor transmission ratio (WVTR) value of 1.8 × 10-4 g/m2 day. Furthermore, as embedded hBN flakes restrict crack propagation, the composite film exhibits high mechanical stability in repeated 3 mm bending radius fatigue tests.

Deriving Mental Energy From Task Completion.

Many tasks in everyday life (e.g., making an accurate decision, completing job tasks, and searching for product information) are extrinsically motivated (i.e., the task is performed to gain a benefit) and require mental effort. Prior research shows that the cognitive resources needed to perform an extrinsically motivated task are allocated pre-task. The pre-task allocation of mental resources tends to be conservative, because mental effort is costly. Consequently, there are mental energy deficits when the use of mental resources exceeds the allocated amount. This research provides evidence for post-task mental energy replenishment. The amount of resource replenishment is a function of the size of the mental energy deficit and the favorability of the cost-benefit trade-off experienced at the completion of the task (i.e., the value of the reward given the energy investment). The findings have implications for how cognitive resources management influences the availability of mental energy on a moment-to-moment basis.

Sagittal Relationship between the Maxillary Central Incisors and the Forehead in Digital Twins of Korean Adult Females.

OBJECTIVE: Digital twins of adult Korean females were created as a tool to evaluate and compare the sagittal relationship between the maxillary central incisors and the forehead before and after orthodontic treatment. METHODS: Digital twins were reconstructed for a total of 50 adult female patients using facial scans and cone-beam computed tomography (CBCT) images. The anteroposterior position of the maxillary central incisor and the forehead inclination were measured. RESULTS: The control group presented a mean of 6.7 mm for the sagittal position and 17.5° for forehead inclination. The study group showed a mean of 9.3 mm for the sagittal position and 13.6° for forehead inclination. Most Korean females seeking orthodontic treatment had their maxillary central incisor anterior to the glabella. In contrast, fewer Korean females who completed their orthodontic treatments had their maxillary central incisor anterior to the glabella. Furthermore, patients who had completed the orthodontic treatment were more likely to have the maxillary central incisor between the forehead facial axis and glabella. CONCLUSION: The use of digital twins for three-dimensional (3D) analysis of the profile implies a high clinical significance. In addition, as the facial profile of Koreans is different from that of Caucasians, careful consideration should be made when setting treatment goals for the anteroposterior position of the maxillary central incisors.

Correction of Condylar Displacement of the Mandible Using Early Screw Removal following Patient-Customized Orthognathic Surgery.

OBJECTIVE: Orthognathic surgery (OGS) is a surgical intervention that corrects dentofacial deformities through the movement of maxillary and mandibular segments to achieve adequate masticatory function, joint health, and facial harmony. However, some patients present with occlusal discrepancies, condylar sag, and/or temporomandibular disorders after OGS. Various methods have been employed to solve these problems after surgery. This study aimed to evaluate the effectiveness of early screw removal in patients with occlusal discrepancies after OGS using three-dimensional cone-beam computed tomography (CBCT). METHODS: In 44 patients with dentofacial deformities, patient-customized OGSs with customized plates were performed to correct facial deformities using customized guides with computer-aided surgical simulation. Of the 44 patients, eight patients complained of occlusal discrepancies and temporomandibular disorders after OGS. These eight patients underwent screw removal under local anesthesia around four weeks. The temporomandibular joint spaces at three time points (pre-surgical, post-surgical, and after screw removal) in the sagittal and coronal planes were compared using CBCT. RESULTS: Eight patients showed an increase in joint space on CBCT images immediately after surgery (T1), but after early screw removal (T2), these spaces almost returned to their pre-surgical state, and the temporomandibular joint problem disappeared. CONCLUSIONS: The removal of screws located in the distal segment under local anesthesia between three and four weeks post-surgically may be a treatment option for patients with post-OGS occlusal discrepancies, condylar sag, and/or temporomandibular disorder.

Defect-Free Mechanical Graphene Transfer Using n-Doping Adhesive Gel Buffer.

The synthesis of uniform low-defect graphene on a catalytic metal substrate is getting closer to the industrial level. However, its practical application is still challenging due to the lack of an appropriate method for its scalable damage-free transfer to a device substrate. Here, an efficient approach for a defect-free, etchant-free, wrinkle-free, and large-area graphene transfer is demonstrated by exploiting a multifunctional viscoelastic polymer gel as a simultaneous shock-free adhesive and dopant layer. Initially, an amine-rich polymer solution in its liquid form allows for conformal coating on a graphene layer grown on a Cu substrate. The subsequent thermally cured soft gel enables the shock-free and wrinkle-free direct mechanical exfoliation of graphene from a substrate due to its strong charge-transfer interaction with graphene and excellent shock absorption. The adhesive gel with a high optical transparency works as an electron doping layer toward graphene, which exhibits significantly reduced sheet resistances without optical transmittance loss. Lastly, the transferred graphene layer shows high mechanical and chemical stabilities under the repeated bending test and exposure to various solvents. This gel-assisted mechanical transfer method can be a solution to connect the missing part between large-scale graphene synthesis and next-generation electronics and optoelectronic applications.

Association studies of -3081(A/T) polymorphism of norepinephrine transporter gene with attention deficit/hyperactivity disorder in Korean population.

Recent studies showing the improvement of ADHD symptoms obtained with the highly selective noradrenergic reuptake inhibitor, atomoxetine, demonstrate that the noradrenergic system plays the role of pathophysiology in this disorder. It is revealed that the norepinephrine transporter gene (SLC6A2) is a possible candidate gene directly related to ADHD. To determine possible roles of the SLC6A2 as a susceptibility gene for ADHD, we performed the genetic association study for a functional -3081(A/T) polymorphism, located in the promoter region of SLC6A2. For the present study of association between ADHD and the SLC6A2, 103 male patients with ADHD and 103 normal male controls were randomly gathered. Significant differences were found in the allele frequencies (chi(2) = 5.60, P = 0.02) and the odds ratio for the allele T between the ADHD and normal subjects was 1.59 (95% CI: 1.08-2.34) suggesting that T allele is critical to make the group difference. Significant group difference was also found in AA, AT, TT genotypes (chi(2) = 7.1, P = 0.02). The odds ratio for TT and AT genotypes was 4.57 (95% CI: 2.56-8.15) and 1.96 (95% CI: 0.96-3.78), respectively. Findings in the present study provided further evidence of association between ADHD and -3081(A/T) polymorphism of SLC6A2.

Highly Efficient n-Type Doping of Graphene by Vacuum Annealed Amine-Rich Macromolecules.

Flexible transparent conducting electrodes (FTCE) are an essential component of next-generation flexible optoelectronic devices. Graphene is expected to be a promising material for the FTCE, because of its high transparency, large charge carrier mobilities, and outstanding chemical and mechanical stability. However, the electrical conductivity of graphene is still not good enough to be used as the electrode of an FTCE, which hinders its practical application. In this study, graphene was heavily n-type doped while maintaining high transmittance by adsorbing amine-rich macromolecules to graphene. The n-type charge-transfer doping of graphene was maximized by increasing the density of free amine in the macromolecule through a vacuum annealing process. The graphene adsorbed with the n-type dopants was stacked twice, resulting in a graphene FTCE with a sheet resistance of 38 ohm/sq and optical transmittance of 94.1%. The figure of merit (FoM) of the graphene electrode is as high as 158, which is significantly higher than the minimum standard for commercially available transparent electrodes (FoM = 35) as well as graphene electrodes doped with previously reported chemical doping methods. Furthermore, the n-doped graphene electrodes not only show outstanding flexibility but also maintain the doping effect even in high temperature (500 K) and high vacuum (~10-6 torr) conditions. These results show that the graphene doping proposed in this study is a promising approach for graphene-based next-generation FTCEs.

Long-term Stability after Reduction of Mandible Fracture by Keyhole Plate: Evaluation at the Time of Plate Removal.

BACKGROUND: Various types of miniplates have been developed and used for the reduction of facial bone fractures. We introduced Yang's Keyhole (YK) plate, and reported on its short-term stability. The purpose of this study was to evaluate the long-term stability of the YK plate, as a follow-up study, by examining the patients who had used the YK plate among the patients with the reduction of mandible fractures and who visited for plate removal. METHODS: We reviewed the medical records of 16 patients who underwent mandibular fracture fixation using a YK plate (group I) and 17 patients who underwent mandibular fracture fixation using a conventional plate (group II). Assessment was then made on malunion, occlusal stability, discomfort during the application, and clinical symptoms. RESULTS: From January 2015 to December 2017, a total of 36 patients underwent mandibular fracture surgery using a YK plate. A total of 16 patients received plate removal. Among them, 15 were male and 1 female. The average age was 26 years. The applied surgical sites were the 12 on mandibular angle, 4 on mandibular symphysis, and 2 on subcondyle. The application period of YK plate was an average of 335 days. During the same period, 45 people underwent surgery on the conventional plate. A total of 17 patients received plate removal. Among them, 15 were male and 2 females. The average age was 36 years. The applied surgical sites were the 8 on mandibular angle, 4 on mandibular symphysis, and 2 on subcondyle. The application period of the conventional plate was an average of 349 days. No malocclusion occurred at the time of removal, and occlusion was stable. No patient complained of joint disease or discomfort. CONCLUSION: The YK plate system, in which the screw was first inserted and the plate was applied, for clinical convenience did not cause any particular problem and no significant difference from the conventional plate.

Transforaminal Endoscopic Discectomy for Hard or Calcified Lumbar Disc Herniation: A New Surgical Technique and Clinical Outcomes.

OBJECTIVE: Hard or calcified discs are often adherent to surrounding nerve tissue. The whole herniated disc is difficult to remove by pulling part of the hernia mass, which makes obtaining good results through endoscopic treatment difficult. The purpose of this study was to describe the details of the transforaminal endoscopic lumbar discectomy technique for a hard or calcified disc and report the clinical results. METHODS: From October 2016 to June 2019, 43 consecutive cases diagnosed as hard or calcified lumbar disc herniation at our institution and treated with transforaminal endoscopic discectomy were evaluated. Endoscopic decompression was performed in patients with hard or calcified lumbar disc herniation. RESULTS: The preoperative visual analog scale score for leg pain (mean ± standard deviation) was 7.09 ± 1.74. The score improved to 2.55 ± 1.35 at 1 week postoperatively, 1.88 ± 1.29 at 4 weeks postoperatively, and 1.58 ± 1.0 at 26 weeks postoperatively (P < 0.01 for all). The preoperative Oswestry Disability Index (mean ± standard deviation) was 55.4 ± 23.04, which improved to 30.89 ± 13.64 at 1 week postoperatively, 23.08 ± 11.64 at 4 weeks postoperatively, and 16.42 ± 9.76 at 26 weeks postoperatively (P < 0.01 for all). Two patients developed a dural laceration. Both patients were discharged after several hours of observation. None of the patients had postoperative infection, epidural hematoma, or delayed neurological deterioration. CONCLUSIONS: Transforaminal endoscopic discectomy could be an effective treatment method for a selected group of patients with hard or calcified lumbar disc herniation.

A Simple and Safe Approach for Maxillary Sinus Augmentation with the Advanced Surgical Guide.

OBJECTIVE: The development of digital dentistry has contributed to the astonishing advancement of implant dentistry. Furthermore, digital technology is expected to be applied extensively to sinus augmentation, which is an advanced technique for implant surgery. This study introduces a simple method for a safer and more precise lateral window opening for sinus augmentation using a navigation program. METHODS: Five eligible patients with residual alveolar bone of 4 mm or less are presented, requiring lateral approach for sinus augmentation. Navigation system was opted for the sinus lift with simultaneous implant placement. Virtual planning started with establishing the adequate position of the lateral window based on the radiographic images and the scanned file of the dentition. The position of the window was indicated on the guide within the program. Afterwards, the virtually designed surgical guide was fabricated either with 3D printer or milling machine for the actual surgery. RESULTS: All the patients who underwent surgery with the surgical guide showed no sign of clinical complications including pain, swelling, nausea, epistaxis, or early loss of the implants. Results of radiographic evaluation also showed adequate placement of the implants in a pre-planned position, and the sinus window was also formed in the desired location. CONCLUSION: Lateral window opening combined with digital navigation system is believed to be a promising technique for a more precise as well as safer sinus augmentation.

Unraveling the Factors Affecting the Electrochemical Performance of MoS2-Carbon Composite Catalysts for Hydrogen Evolution Reaction: Surface Defect and Electrical Resistance of Carbon Supports.

In MoS2-carbon composite catalysts for hydrogen evolution reaction (HER), the carbon materials generally act as supports to enhance the catalytic activity of MoS2 nanosheets. The carbon support provides a large surface area for increasing the MoS2 edge site density, and its physical structure can affect the electron transport rate in the composite catalysts. However, despite the importance of the carbon materials, direct observation of the effects of the physical properties of the carbon supports on the HER activity of MoS2-carbon composite catalysts has been hardly reported. In this work, we conduct an experimental model study to find the fundamental and important understanding of the correlation between the structural characteristics of carbon supports and the HER performance of MoS2-carbon composite catalysts using surface-modified graphitic carbon shell (GCS)-encapsulated SiO2 nanowires (GCS@SiO2 NWs) as support materials for MoS2 nanosheets. The surface defect density and the electrical resistance of GCS@SiO2 NWs are systematically modulated by control of H2 gas flow rates during the carbon shell growth on the SiO2 NWs. From in-depth characterization of the model catalysts, it is confirmed that the intrinsic catalytic activity of MoS2-carbon composites for the HER is improved linearly with the conductance of the carbon supports regardless of the MoS2 edge site density. However, in the HER polarization curve, the apparent current density increases in proportion to the product of the number of MoS2 edge sites and the conductance of GCS@SiO2 NWs.

A case-control association study of the polymorphism at the promoter region of the DRD4 gene in Korean boys with attention deficit-hyperactivity disorder: evidence of association with the -521 C/T SNP.

Recent genetic studies at the 5' end of the dopamine D4 receptor (DRD4) gene have identified several polymorphisms having a possible relationship with attention deficit-hyperactivity disorder (ADHD). This study examined the association between the -521 and -376 promoter single nucleotide polymorphisms (SNPs) of the DRD4 gene and ADHD through a case-control association study in Korean boys, who constitute a single ethnic population. Ninety-four ADHD and ninety-five control boys were enrolled in this study. All of the ADHD subjects completed a comprehensive and standardized diagnostic and psychological evaluation battery including the ADHD Rating Scale-IV (ARS). Genotyping for the 2 promoter SNPs was performed. There were significant differences in the genotype and allele frequencies of the -521 C/T SNP between the ADHD and control groups (chi2=6.28, p=0.043 and chi2=6.22, p=0.013, respectively). However, the distribution of the -376 C/T genotypes and alleles were similar in the ADHD and control groups. The subtypes of ADHD were not related to either of these two SNPs. In the ADHD subjects, the -521 TT genotype group had a higher score in the inattentive subscale and a lower score in the hyperactive subscale of the parents version of ARS, although these differences did not attain statistical significance (p=0.146, p=0.082). In conclusion, there was a significant association between the -521 C/T SNP and ADHD in Korean boys. These results suggest a role of the -521 C/T SNP in the susceptibility for ADHD.

Transforaminal Endoscopic Decompression for Lumbar Spinal Stenosis: A Novel Surgical Technique and Clinical Outcomes.

OBJECTIVE: Transforaminal endoscopic treatment has been reported to be an effective treatment option in patients with lumbar disc herniation. However, it is rarely performed for spinal stenosis because of the limitation of endoscopic working mobility caused by the exiting nerve root and foraminous bony structure. The objective of this study was to describe a novel transforaminal endoscopic decompression technique for spinal stenosis and report the clinical results. METHODS: From October 2015 to October 2016, 30 consecutive cases were diagnosed as lateral recess stenosis in our institution and underwent transforaminal endoscopic decompression. Visual analog scale (VAS) of back and leg pain and the Oswestry Disability Index (ODI) were measured preoperatively and at follow-up. RESULTS: The mean ± SD value of preoperative VAS leg pain score was 7.6 ± 1.17. The score improved to 2.2 ± 1.11 at 1 week postoperatively, 1.73 ± 0.96 at 4 weeks postoperatively, and 1.63 ± 0.95 at 26 weeks postoperatively (P < 0.01). The mean ± SD value of the preoperative ODI score was 65.69 ± 14.22. The score improved to 24.29 ± 11.89 at 1 week postoperatively, 21.25 ± 9.25 at 4 weeks postoperatively, and 15.62 ± 10.49 at 26 weeks postoperatively (P < 0.01). There were no patients with postoperative infection, dural tear, delayed neurologic deterioration, or conversion to open surgery. CONCLUSIONS: Transforaminal endoscopic decompression under local anesthesia could be an effective treatment method for the selected group of patients with spinal stenosis.

-759 C/T polymorphism of 5-HT2C receptor gene and early phase weight gain associated with antipsychotic drug treatment.

5-HT2C receptor gene is viewed as an important candidate gene in pharmacogenetic studies of antipsychotic drug-induced weight gain. However, inconsistent results have been obtained in different populations. We investigated the association between the -759C/T polymorphism of the 5-HT2C receptor gene with early phase (after 4 weeks of treatment) weight gain induced by antipsychotic treatment in Korean schizophrenia patients. The study subjects were eighty-four in-patients receiving monotherapy with one of six antipsychotic drugs. Patients with the variant allele (-759T) were found to be less likely to have substantial (> 5%) weight gain (Fisher's exact test, p=0.030), and this association (t=1.91, df=75, p=0.030) was supported by the repeated measures analysis after controlling for possible confounding effects, i.e., age, sex, baseline BMI, and the type of antipsychotic medicine administered. The variant allele also appeared to have a protective effect against weight gain in a subgroup of patients receiving risperidone. These results support the involvement of the -759C/T polymorphism of the 5-HT2C receptor gene in antipsychotics-induced weight gain in the Korean population.

Clinical application of 3D-printed-step-bolus in post-total-mastectomy electron conformal therapy.

The 3D-printed boluses were used during the radiation therapy of the chest wall in six patients with breast cancer after modified radical mastectomy (MRM). We measured the in-vivo skin doses while both conventional and 3D-printed boluses were placed on the chest wall and compared the mean doses delivered to the ipsilateral lung and the heart. The homogeneity and conformity of the dose distribution in the chest wall for both types of boluses were also evaluated. The uniformity index on the chest skin was improved when the 3D-printed boluses were used, with the overall average skin dose being closer to the prescribed one in the former case (-0.47% versus -4.43%). On comparing the dose-volume histogram (DVH), it was found that the 3D-printed boluses resulted in a reduction in the mean dose to the ipsilateral lung by up to 20%. The precision of dose delivery was improved by 3% with the 3D-printed boluses; in contrast, the conventional step bolus resulted in a precision level of 5%. In conclusion, the use of the 3D-printed boluses resulted in better dose homogeneity and conformity to the chest wall as well as the sparing of the normal organs, especially the lung. This suggested that their routine use on the chest wall as a therapeutic approach during post-mastectomy radiation therapy offers numerous advantages over conventional step boluses.

Psychiatric comorbidity in Korean children and adolescents with attention-deficit hyperactivity disorder: psychopathology according to subtype.

It is well-known that more than 50% of attention-deficit hyperactivity disorder (ADHD) cases also have comorbid psychiatric disorders. We evaluated the comorbid psychopathology of Korean children and adolescents with ADHD using a standardized diagnostic instrument. The Korean Kiddie-Schedule for Affective Disorders and Schizophrenia-Present and Lifetime Version (K-SADS-PL-K) was administered and completed in 105 patients who had been referred to the outpatient and inpatient clinics at the Samsung Medical Center from March 2004 to May 2005. All of the cases were diagnosed as ADHD according to DSM-IV criteria. We analyzed their clinical characteristics and psychiatric comorbidities, and assessed the correlation of any comorbidity with gender, age and ADHD subtype. Among our 105 participants, 70 (66.7%) subjects were diagnosed with combined-type ADHD, 22 (21.0%) were the predominantly inattentive type, only 1 (1.0%) was determined to have the predominantly hyperactive-impulsive type of ADHD, and 12 (11.4%) were classified as not otherwise specified (NOS) ADHD. Eighty (76.2%) subjects had at least one comorbid disorder such as oppositional defiant disorder (n = 53, 50.5%), anxiety disorders (n = 35, 33.3%) and affective disorders (n = 15, 14.3%). Our patients ranged in age from five to 16 years. Among the factors including gender, age, and ADHD subtype, ADHD subtype was the only one significant to comorbidity in our study. The results of this study suggest that psychiatric comorbidity in Korean children with ADHD is similar to the results of previous studies in western countries. Out of all the ADHD subtypes, the combined-type group had a significantly higher ratio of comorbid disorders and psychopathologies.