Growth Characteristic Analysis of Haematococcus pluvialis in a Microfluidic Chip Using Digital in-Line Holographic Flow Cytometry.

In order to obtain high yield of astaxanthin, a high-value compound with ultrastrong antioxidant capacity, it is necessary to identify the growth characteristics (biomass, morphology, and size) of Haematococcus pluvialis. The current detection methods have the disadvantages of labor-consuming operation or complicated measurement system. It is an urgent need to explore a simple and cost-effective method for the detection of H. pluvialis with large size distribution during its growth period. In this work, a digital in-line holographic flow cytometry using a linear array sensor is proposed to measure the growth characteristics of H. pluvialis in a two-dimensional (2-D) hydrodynamic focusing microfluidic chip. Based on the modified angular spectrum method, the distorting holograms caused by the asynchrony of sample flow velocity and acquisition speed of the linear array sensor were rectified and reconstructed. In addition, the depth-of-focus of the imaging system were digitally extended to cover the entire depth of the microfluidic channel for optimized imaging quality. We have utilized the proposed method to statistically investigate the biomass, morphology and size of H. pluvialis under different culture conditions and growth durations.

Ginkgo Leaf Inspired Fabrication of Micro/Nanostructures and Demonstration of Flexible Enzyme-Free Glucose Sensors.

Flexible enzyme-free glucose sensors have attracted widespread attention due to their importance and potential applications in clinical diagnosis, flexible wearable devices, and implanted devices in vivo. At present, there are still major problems in fabricating flexible enzyme-free glucose sensors with low detection limits, high stability, and high sensitivity at low cost, hindering their practical application. Here, we report a facile strategy for the fabrication of flexible non-enzymatic glucose sensors using ginkgo leaf as a template. NiO film and PEDOT:PSS composite film were deposited on the surface of the ginkgo leaf induced micro-nano hierarchical structure as a sensitive layer and a conductive layer, respectively. The as-prepared, flexible, enzyme-free glucose sensor exhibited excellent electrochemical performance toward glucose oxidation with a sensitivity of 0.7413 mA·mM-1/cm-2, an operating voltage of 0.55 V, a detection limit of 0.329 µM, and good anti-interference. Due to the simple fabrication process and performance reliability, the novel flexible enzyme-free glucose sensor is an attractive candidate for next generation wearable and implantable non-enzymatic glucose diagnostic devices.

Tunable Optical Diffusers Based on the UV/Ozone-Assisted Self-Wrinkling of Thermal-Cured Polymer Films.

Tunable optical diffusers have attracted attention because of the rapid development of next generation stretchable optoelectronics and optomechanics applications. Flexible wrinkle structures have the potential to change the light path and tune the diffusion capability, which is beneficial to fabricate optical diffusers. The generation of wrinkles usually depends on an external stimulus, thus resulting in complicated fabricating equipment and processes. In this study, a facile and low-cost method is proposed to fabricate wrinkle structures by the self-wrinkling of thermal-cured polymer for tunable optical diffusers. The uncured polydimethylsiloxane (PDMS) precursors were exposed to UV/ozone to obtain hard silica layers and then crosslinked via heating to induce the wrinkle patterns. The wrinkle structures were demonstrated as strain-dependent tunable optical diffusers and the optical diffusion of transmitted light via the deformable wrinkle structures was studied and adjusted. The incident light isotropically diffused through the sample at the initial state. When the wrinkle structures deformed, it showed a more pronounced isotropic optical diffusion with uniaxial tensile strain. The optical diffusion is anisotropical with a further increase in uniaxial tensile strain. The proposed method of fabricating wrinkles by UV/ozone-assisted self-wrinkling of thermal-cured polymer films is simple and cost-effective, and the obtained structures have potential applications in tunable optical diffusers.

Rapid identification of ultrathin amorphous damage on monocrystalline silicon surface.

Amorphous silicon (a-Si) is a type of common surface damages during the ultra-precision machining of monocrystalline Si. However, it is difficult to identify the amorphous damage of several nanometers by traditional detection methods, which severely hinders the performance improvement of Si-based products. In this study, ultrathin a-Si was found to act as a mask against etching in HF/HNO3 mixtures, resulting in the formation of protrusive hillocks. Reciprocating sliding on an atomic force microscope (AFM) was employed to simulate a material removal event in surface manufacturing. The effects of normal load, etching time and etchant concentration on selective etching were investigated to optimize the parameters for amorphous damage detection. The mechanisms for selective etching were further addressed based on high-resolution transmission electron microscopy (HRTEM) detection and comparative etching of different surface structures. Further analysis demonstrated that a lower dangling bond density of a-Si could result in the reduction of the dissolution rate, while deformed Si lattices, including stacking faults, dislocations and microcracks, could facilitate rapid selective etching. By the proposed selective etching, ultrathin amorphous damage and its spatial distributions can be rapidly identified with high resolution and low destruction. This study sheds new light on achieving a high-quality Si surface in ultra-precision machining.

Cost-Effective Fabrication of Inner-Porous Micro/Nano Carbon Structures.

This paper reports the fabrication of a new micro/nano carbon architecture array which owns the characteristics of inner-porous, desired conductivity and large effective surface area. The micro/nano inner-porous carbon structures were fabricated for the first time, with ordinary and cost-effective processes, including photolithography, oxygen plasma etching and pyrolysis. Firstly, micro/nano hierarchical photoresist structures array was generated through photolithography and oxygen plasma etching processes. By introducing a critical thin-film spin-coating step, and followed with carefully pyrolyzing process, the micro/nano photoresist structures were converted into innerporous carbon architectures with good electric connection which connected the carbon structures array together. Probably the inner-porous property can be attributed to the shrinkage difference between positive thin film and negative photoresist structures during pyrolyzing process. It is demonstrated that the simple method is effective to fabricate inner-porous carbon structures with good electric connection and the carbon structures can be used as electrochemical electrodes directly and without the addition of other pyrolysis or film coating processes. The electrochemical property of the carbon structures has been explored by cyclic voltammetric measurement. Compared with solid carbon microstructures array, the cyclic voltammetry curve of inner-porous carbon structures shows greatly enhanced current and improved charge-storage capability, indicating great potential in micro energy storage devices and bio-devices.

Inline Measurement of Particle Concentrations in Multicomponent Suspensions using Ultrasonic Sensor and Least Squares Support Vector Machines.

This paper proposes an ultrasonic measurement system based on least squares support vector machines (LS-SVM) for inline measurement of particle concentrations in multicomponent suspensions. Firstly, the ultrasonic signals are analyzed and processed, and the optimal feature subset that contributes to the best model performance is selected based on the importance of features. Secondly, the LS-SVM model is tuned, trained and tested with different feature subsets to obtain the optimal model. In addition, a comparison is made between the partial least square (PLS) model and the LS-SVM model. Finally, the optimal LS-SVM model with the optimal feature subset is applied to inline measurement of particle concentrations in the mixing process. The results show that the proposed method is reliable and accurate for inline measuring the particle concentrations in multicomponent suspensions and the measurement accuracy is sufficiently high for industrial application. Furthermore, the proposed method is applicable to the modeling of the nonlinear system dynamically and provides a feasible way to monitor industrial processes.

An examination of Alzheimer's disease and white matter from 1981 to 2023: a Bibliometric and visual analysis.

Background: Alzheimer's disease (AD) is characterized by the presence of gray matter lesions and alterations in white matter. This study aims to investigate the research related to white matter in the context of AD from a Bibliometric standpoint. Methods: Regular and review articles focusing on the research pertaining to Alzheimer's disease (AD) and white matter were extracted from the Web of Science Core Collection (WOSCC) database, covering the period from its inception to 10th July 2023. The "Bibliometrix" R package was employed to summarize key findings, to quantify the occurrence of top keywords, and to visualize the collaborative network among countries. Furthermore, VOSviewer software was utilized to conduct co-authorship and co-occurrence analyses. CiteSpace was employed to identify the most influential references and keywords based on their citation bursts. The retrieval of AD- and white matter-related publications was conducted by the Web of Science Core Collection. Bibliometric analysis and visualization, including the examination of annual publication distribution, prominent countries, active institutions and authors, core journals, co-cited references, and keywords, were carried out by using VOSviewer, CiteSpace, the Bibliometrix Package, and the ggplot2 Package. The quality and impact of publications were assessed using the total global citation score and total local citation score. Results: A total of 5,714 publications addressing the intersection of Alzheimer's disease (AD) and white matter were included in the analysis. The majority of publications originated from the United States, China, and the United Kingdom. Prominent journals were heavily featured in the publication output. In addition to "Alzheimer's disease" and "white matter," "mild cognitive impairment," "MRI" and "atrophy" had been frequently utilized as "keywords." Conclusion: This Bibliometric investigation delineated a foundational knowledge framework that encompasses countries, institutions, authors, journals, and articles within the AD and white matter research domain spanning from 1981 to 2023. The outcomes provide a comprehensive perspective on the broader landscape of this research field.

Bioinspired High-Performance Bilayer, pH-Responsive Hydrogel with Superior Adhesive Property.

Soft actuators have attracted extensive attention for promising applications in drug delivery, microfluidic switches, artificial muscles and flexible sensors. However, the performance of pH-responsive hydrogel actuators, such as regarding reversible bending property and adhesive property, remains to be improved. In this study, inspired by drosera leaves, we have fabricated high-performance bilayer, pH-responsive poly(acrylamide-acrylic acid-3-acrylamidophenylboronic acid)(P(AAm-AAc-3-AAPBA)) based on the copolymers of AAm, AAc and 3-AAPBA. The pH-sensitive actuators were fabricated by ultraviolet polymerization of the P(AAm-AAc-3-AAPBA) layer as the active actuating layer and the PAAm layer as the auxiliary actuating layer. The effects of pH, glucose concentration and content of 3-AAPBA on bending behavior of P(AAm-AAc-3-AAPBA)/PAAm bilayer actuators were discussed. By tuning the pH of media, the soft actuator could achieve fast and large-amplitude bidirectional bending behaviors. The bending orientation and bending degree can be reversibly and precisely adjusted. More importantly, P(AAm-AAc-3-AAPBA) hydrogel shows good adhesive property in polyvinyl alcohol (PVA) solution; thus, complex structures have been fabricated. In addition, the bilayer hydrogel structures have been demonstrated as soft actuators, bionic flowers and bionic manipulators. The proposed pH-responsive bilayer actuator shows great potential for drug delivery and other medical systems.

The Fusion of Microfluidics and Optics for On-Chip Detection and Characterization of Microalgae.

It has been demonstrated that microalgae play an important role in the food, agriculture and medicine industries. Additionally, the identification and counting of the microalgae are also a critical step in evaluating water quality, and some lipid-rich microalgae species even have the potential to be an alternative to fossil fuels. However, current technologies for the detection and analysis of microalgae are costly, labor-intensive, time-consuming and throughput limited. In the past few years, microfluidic chips integrating optical components have emerged as powerful tools that can be used for the analysis of microalgae with high specificity, sensitivity and throughput. In this paper, we review recent optofluidic lab-on-chip systems and techniques used for microalgal detection and characterization. We introduce three optofluidic technologies that are based on fluorescence, Raman spectroscopy and imaging-based flow cytometry, each of which can achieve the determination of cell viability, lipid content, metabolic heterogeneity and counting. We analyze and summarize the merits and drawbacks of these micro-systems and conclude the direction of the future development of the optofluidic platforms applied in microalgal research.

Boosting the Performance of Self-Powered CsPbCl3-Based UV Photodetectors by a Sequential Vapor-Deposition Strategy and Heterojunction Engineering.

All-inorganic CsPbCl3 perovskite in ultraviolet (UV) detection is drawing increasing interest owing to its UV-matchable optical band gap, ultrahigh UV stability, and superior inherent optoelectronic properties. Almost all of the reported CsPbCl3 photodetectors employ CsPbCl3 nano- or microstructures as sensitive components, while CsPbCl3 polycrystalline film-based self-powered photodetectors are rarely studied on account of the terrible precursor solubility. Herein, a novel sequential vapor-deposition technique is demonstrated to fabricate CsPbCl3 polycrystalline film for the first time. High-quality CsPbCl3 films with excellent optical, electronic, and morphological features are obtained. A self-powered photodetector based on the CsPbCl3 film is constructed without any charge transport layer, showing a high UV detection performance. A thin p-type PbS buffer layer is further introduced to passivate the surface defects of the CsPbCl3 layer and decrease the interfacial energy barrier by forming a type-II heterojunction, contributing to a faster hole extraction rate and a suppressed dark current level. The best-performing device achieves an ultrafast response time of 1.92 µs, an ultrahigh on/off ratio of 2.22 × 105, and a responsivity of 0.22 A/W upon 375 nm UV illumination at 0 V bias. This comprehensive performance is the best among all of the CsPbCl3 photodetectors reported to date. The as-prepared photodetectors also present an eminent UV irradiation and long-term durability in ambient air. Furthermore, a large-area and uniform 625-pixel UV image sensor is fabricated and attains a prominent imaging capability. Our work opens a new avenue for the scalable production of CsPbCl3-based optoelectronics.

High-performance optical projection controllable ZnO nanorod arrays for microweighing sensors.

Optical microweighing sensors are an essential component of micro-force measurements in physical, chemical, and biological detection fields, although, their limited detection range (less than 15°) severely hinders their wide application. Such a limitation is mainly attributed to the essential restrictions of traditional light reflection and optical waveguide modes. Here, we report a high-performance optical microweighing sensor based on the synergistic effects of both a new optical projection mode and a ZnO nanorod array sensor. Ascribed to the unique configuration design of this sensing method, this optical microweighing sensor has a wide detection range (more than 80°) and a high sensitivity of 90 nA deg-1, which is much larger than that of conventional microcantilever-based optical microweighing sensors. Furthermore, the location of the UV light source can be adjusted within a few millimeters, meaning that the microweighing sensor does not need repetitive optical calibration. More importantly, for low height and small incident angles of the UV light source, we can obtain highly sensitive microweighing properties on account of the highly sensitive ZnO nanorod array-based UV sensor. Therefore, this kind of large detection range, non-contact, and non-destructive microweighing sensor has potential applications in air quality monitoring and chemical and biological detection.

Facile Synthesis of Free-Standing NiO/MnO2 Core-Shell Nanoflakes on Carbon Cloth for Flexible Supercapacitors.

Free-standing NiO/MnO2 core-shell nanoflake structure was deposited on flexible carbon cloth (CC) used as electrode for high-performance supercapacitor (SC). The NiO core was grown directly on CC by hydrothermal process and the following annealing treatment. MnO2 thin film was then covered on NiO structures via a self-limiting process in aqueous solution of 0.5 M KMnO4 and 0.5 M Na2SO4 with a carbon layer serving as the sacrificial layer. Both the core and shell materials are good pseudocapacitive materials, the compounds of binary metal oxides can provide the synergistic effect of all individual constituents, and thus enhance the performance of SC electrode. The obtained CC/NiO/MnO2 heterostructure was directly used as SC electrodes, showing an enhanced electrochemical performance including areal capacitance of 316.37 mF/cm2 and special gravimetric capacitance of 204.3 F/g at the scan rate of 50 mV/s. The electrode also shows excellent cycling stability, which retains 89% of its initial discharge capacitance after 2200 cycles with >97% Coulombic efficiency. The synthesized binder-free hierarchical composite electrode with superior electrochemical properties demonstrates enormous potential in the application of flexible SCs.

Layered microporous polymers by solvent knitting method.

Two-dimensional (2D) nanomaterials, especially 2D organic nanomaterials with unprecedentedly diverse and controlled structure, have attracted decent scientific interest. Among the preparation strategies, the top-down approach is one of the considered low-cost and scalable strategies to obtain 2D organic nanomaterials. However, some factors of their layered counterparts limited the development and potential applications of 2D organic nanomaterials, such as type, stability, and strict synthetic conditions of layered counterparts. We report a class of layered solvent knitting hyper-cross-linked microporous polymers (SHCPs) prepared by improving Friedel-Crafts reaction and using dichloroalkane as an economical solvent, stable electrophilic reagent, and external cross-linker at low temperature, which could be used as layered counterparts to obtain previously unknown 2D SHCP nanosheets by method of ultrasonic-assisted solvent exfoliation. This efficient and low-cost strategy can produce previously unreported microporous organic polymers with layered structure and high surface area and gas storage capacity. The pore structure and surface area of these polymers can be controlled by tuning the chain length of the solvent, the molar ratio of AlCl3, and the size of monomers. Furthermore, we successfully obtain an unprecedentedly high-surface area HCP material (3002 m2 g-1), which shows decent gas storage capacity (4.82 mmol g-1 at 273 K and 1.00 bar for CO2; 12.40 mmol g-1 at 77.3 K and 1.13 bar for H2). This finding provides an opportunity for breaking the constraint of former knitting methods and opening up avenues for the design and synthesis of previously unknown layered HCP materials.

Enhanced cycling stability of NiCo2S4@NiO core-shell nanowire arrays for all-solid-state asymmetric supercapacitors.

As a new class of pseudocapacitive material, metal sulfides possess high electrochemical performance. However, their cycling performance as conventional electrodes is rather poor for practical applications. In this article, we report an original composite electrode based on NiCo2S4@NiO core-shell nanowire arrays (NWAs) with enhanced cycling stability. This three-dimensional electrode also has a high specific capacitance of 12.2 F cm-2 at the current density of 1 mA cm-2 and excellent cycling stability (about 89% retention after 10,000 cycles). Moreover, an all-solid-state asymmetric supercapacitor (ASC) device has been assembled with NiCo2S4@NiO NWAs as the positive electrode and active carbon (AC) as the negative electrode, delivering a high energy density of 30.38 W h kg-1 at 0.288 KW kg-1 and good cycling stability (about 109% retention after 5000 cycles). The results show that NiCo2S4@NiO NWAs are promising for high-performance supercapacitors with stable cycling based on the unique core-shell structure and well-designed combinations.

High-performance binder-free supercapacitor electrode by direct growth of cobalt-manganese composite oxide nansostructures on nickel foam.

A facile approach composed of hydrothermal process and annealing treatment is proposed to directly grow cobalt-manganese composite oxide ((Co,Mn)3O4) nanostructures on three-dimensional (3D) conductive nickel (Ni) foam for a supercapacitor electrode. The as-fabricated porous electrode exhibits excellent rate capability and high specific capacitance of 840.2 F g(-1) at the current density of 10 A g(-1), and the electrode also shows excellent cycling performance, which retains 102% of its initial discharge capacitance after 7,000 cycles. The fabricated binder-free hierarchical composite electrode with superior electrochemical performance is a promising candidate for high-performance supercapacitors.

Growth of hierarchal mesoporous NiO nanosheets on carbon cloth as binder-free anodes for high-performance flexible lithium-ion batteries.

Mesoporous NiO nanosheets were directly grown on three-dimensional (3D) carbon cloth substrate, which can be used as binder-free anode for lithium-ion batteries (LIBs). These mesoporous nanosheets were interconnected with each other and forming a network with interval voids, which give rise to large surface area and efficient buffering of the volume change. The integrated hierarchical electrode maintains all the advantageous features of directly building two-dimensional (2D) nanostructures on 3D conductive substrate, such as short diffusion length, strain relaxation and fast electron transport. As the LIB anode, it presents a high reversible capacity of 892.6 mAh g(-1) after 120 cycles at a current density of 100 mA g(-1) and 758.1 mAh g(-1) at a high charging rate of 700 mA g(-1) after 150 cycles. As demonstrated in this work, the hierarchical NiO nanosheets/carbon cloth also shows high flexibility, which can be directly used as the anode to build flexible LIBs. The introduced facile and low-cost method to prepare NiO nanosheets on flexible and conductive carbon cloth substrate is promising for the fabrication of high performance energy storage devices, especially for next-generation wearable electronic devices.