Designing a Phenalenyl-Based Dinuclear Ni(II) Complex: An Electrocatalyst with Two Single Ni Sites for the Oxygen Evolution Reaction (OER).

A new dinuclear Ni(II) complex 1, [Ni2II(dtbh-PLY)2], is synthesized from 9-(2-(3,6-di-tert-butyl-2-hydroxybenzylidene)hydrazineyl)-1H-phenalen-1-one, dtbh-PLYH2 ligand, and structurally characterized by various analytical tools including the single-crystal X-ray diffraction (SCXRD) technique. In the solid state, both Ni(II) metal centers in complex 1 exist in a distorted square planar geometry and display the presence of rare Ni···H-C anagostic interactions to form a one-dimensional (1-D) linear motif in the supramolecular array. Complex 1 is further stabilized in the solid state by π-π-stacking interactions between the highly delocalized phenalenyl rings. The redox features of complex 1 have been analyzed by the cyclic voltammetry (CV) technique in solution as well as in the solid state, revealing the crucial involvement of both the Ni(II) metal centers for undergoing quasi-reversible oxidation reactions on the application of an anodic sweep. A complex 1-modified glassy carbon electrode, GC-1, is employed as an electrocatalyst for oxygen evolution reaction (OER) in 1.0 M KOH, giving an OER onset at 1.45 V, and very low OER overpotential, 300 mV vs the reversible hydrogen electrode (RHE) to reach 10 mA cm-2 current density. Furthermore, GC-1 displayed fast OER kinetics with a Tafel slope of 40 mV dec-1, a significantly lower Tafel slope value than those of previously reported molecular Ni(II) catalysts. In situ electrochemical experiments and postoperational UV-vis, Fourier transform infrared (FT-IR), scanning electron microscopy-energy-dispersive X-ray spectroscopy (SEM-EDS), and X-ray photoelectron spectroscopy (XPS) studies were performed to analyze the stability of the molecular nature of complex 1 and to gain reasonable insights into the true OER catalyst.

Redox Switching Behavior in Resistive Memory Device Designed Using a Solution-Processable Phenalenyl-Based Co(II) Complex: Experimental and DFT Studies.

We herein report a novel square-planar complex [CoIIL], which was synthesized using the electronically interesting phenalenyl-derived ligand LH2 = 9,9'-(ethane-1,2-diylbis(azanediyl))bis(1H-phenalen-1-one). The molecular structure of the complex is confirmed with the help of the single-crystal X-ray diffraction technique. [CoIIL] is a mononuclear complex where the Co(II) ion is present in the square-planar geometry coordinated by the chelating bis-phenalenone ligand. The solid-state packing of [CoIIL] complex in a crystal structure has been explained with the help of supramolecular studies, which revealed that the π···π stacking present in the [CoIIL] complex is analogous to the one present in tetrathiafulvalene/tetracyanoquinodimethane charge transfer salt, well-known materials for their unique charge carrier interfaces. The [CoIIL] complex was employed as the active material to fabricate a resistive switching memory device, indium tin oxide/CoIIL/Al, and characterized using the write-read-erase-read cycle. The device has interestingly shown a stable and reproducible switching between two different resistance states for more than 2000 s. Observed bistable resistive states of the device have been explained by corroborating the electrochemical characterizations and density functional theory studies, where the role of the CoII metal center and π-conjugated phenalenyl backbone in the redox-resistive switching mechanism is proposed.

Designing one-compartment H2O2 fuel cell using electroactive phenalenyl-based [Fe2(hnmh-PLY)3] complex as the cathode material.

The sustainable chemical energy of H2O2 as a fuel and an oxidant in an advantageous single-compartment fuel cell design can be converted into electric energy, which requires molecular engineering to design suitable cathodes for lowering the high overpotential associated with H2O2 reduction. The present work covers the synthesis and structural characterization of a novel cathode material, [FeIII2(hnmh-PLY)3] complex, 1, designed from a PLY-derived Schiff base ligand (E)-9-(2-((2-hydroxynaphthalen-1-yl)methylene)hydrazineyl)-1H-phenalen-1-one, hnmh-PLYH2. Complex 1, when coated on the surface of a glassy carbon electrode (GC-1) significantly catalyzed the reduction of H2O2 in an acidic medium. Therefore, a complex 1 modified glassy carbon electrode was employed in a one-compartment H2O2 fuel cell operated in 0.1 M HCl with Ni foam as the corresponding anode to produce a high open circuit potential (OCP) of 0.65 V and a peak power density (PPD) of 2.84 mW cm-2. CV studies of complex 1 revealed the crucial participation of two Fe(III) centers for initiating H2O2 reduction, and the role of coordinated redox-active PLY units is also highlighted. In the solid state, the π-conjugated network of coordinating (hnmh-PLY) ligands in complex 1 has manifested interesting face-to-face π-π stacking interactions, which have helped the reduction of the complex and facilitated the overall catalytic performance.

A closed-shell phenalenyl-based dinuclear iron(III) complex as a robust cathode for a one-compartment H2O2 fuel cell.

Closed-shell phenalenyl (PLY) systems are increasingly becoming more attractive as building blocks for developing promising catalysts and electroactive cathode materials, as they have tremendous potential to accept electrons and participate in redox reactions. Herein, we report a PLY-based dinuclear [FeIII2(hmbh-PLY)3] complex, 1, and its utility as a cathode material in a H2O2 fuel cell. Complex 1 was synthesized from a new Schiff base ligand, (E)-9-(2-(2-hydroxy-3-methoxybenzylidene)hydrazineyl)-1H-phenalen-1-one, hmbh-PLYH2, designed using a PLY precursor, Hz-PLY. The newly derived ligand and complex 1 were characterized by various analytical techniques, including single-crystal X-ray diffraction (SCXRD). The cyclic voltammetry (CV) study revealed that complex 1 undergoes five electron reductions under an applied electric potential. When the electroactive complex 1 was employed as a cathode in a membrane-less one-compartment H2O2 fuel cell, with Ni foam as the corresponding anode, the designed fuel cell exhibited an exceptionally high peak power density (PPD) of 2.41 mW cm-2, in comparison with those of all the previously reported Fe-based molecular complexes. DFT studies were performed to gain reasonable insights into the two-electron catalytic reduction (pathway I) of H2O2 by the Fe-center of complex 1 and to explore the geometries, energetics of the electrocatalyst, reactive intermediates and transition states.

Designing a Redox Noninnocent Phenalenyl-Based Copper(II) Complex: An Autotandem Catalyst for the Selective Oxidation of Polycyclic Aromatic Hydrocarbons (PAHs).

A square-planar [CuIIL] complex 1, based on the redox-active phenalenyl unit LH2 = 9,9'-(ethane-1,2-diylbis(azanediyl))bis(1H-phenalen-1-one), is prepared and structurally characterized by single-crystal X-ray diffraction analysis. Complex 1 crystallizes at room temperature with the P1 space group. The molecular structure of 1 reveals the presence of intriguing C-H···Cu intermolecular anagostic interactions of the order ∼2.7715 Å. Utilizing the presence of anagostic interactions and the free nonbonding molecular orbitals (NBMOs) of the closed-shell phenalenyl unit in 1, the oxidation reactions of some industrially important polycyclic aromatic hydrocarbons (PAHs) in the presence of the [CuIIL] complex under very mild conditions have been reported. The direct conversion of anthracene-9-carbaldehyde to 9,10-anthraquinone in one step concludes that the catalyst shows dual activity in the chemical transformations. This also includes the first report of a "single-step" catalytic transformation of pyrene-1-carbaldehyde to the synthetically difficult pyren-4-ol, a precursor for the synthesis of several novel fluorescent probes for cell imaging.