Evaluation of skeletal and dentoalveolar changes in class II division I pediatric patients receiving myofunctional appliance therapy: A preliminary study.

BACKGROUND/PURPOSE: The treatment effect of myofunctional appliance therapy has remained debated. The aim of this study was to evaluate the skeletal and dentoalveolar effects in class II division I pediatric patients receiving Education Fonctionnelle (EF) myofunctional appliance therapy. METHODS: Thirteen patients undergoing EF appliance treatment (9 boys and 4 girls；average 9.3years old) met the inclusion criteria and 13 untreated patients (9 boys and 4 girls；average 9.9 years old) served as controls. Initial and one-year follow-up lateral cephalometric measurement was used to assess skeletal and dentoalveolar changes. Gender ratio was analyzed using Chi-square test. Age and cephalometric measurement changes within and between the two groups were analyzed using Mann-Whitney U test and Wilcoxon signed rank test and Benjamini - Hochberg procedure. RESULTS: There were no significant differences in age, gender ratio, and initial cephalometric measurement data between the two groups. One-year follow-up skeletal findings revealed no significant differences between the two groups. Regarding the dentoalveolar changes, only the values of the upper incisor angle related parameters revealed significances between the two group (with adjusted p value). CONCLUSION: In this preliminary small sample size study, the EF group demonstrated significant upper incisor angle decrease, lower incisor angle increase, and lower incisor tip to mandibular plane distance decrease in comparison to the values measured in the control group. However, only the upper incisor angle changes were statistically significant after p-value adjustment. The skeletal effect of the EF appliance could not be verified in one-year follow-up of cephalometric data.

Patients with juvenile idiopathic arthritis are at increased risk for obstructive sleep apnoea: a population-based cohort study.

BACKGROUND AND OBJECTIVES: Juvenile idiopathic arthritis (JIA), an autoimmune disease, has been proposed to be comorbid with obstructive sleep apnoea (OSA). We aimed at testing the hypothesis that patients with JIA may presented with high risk of OSA in a cohort study. SUBJECTS AND METHODS: This is a cohort study including patients with JIA from 1999 to 2013 identified from a longitudinal health registry. A matched non-JIA control group was also included. The primary outcome variable was presence of OSA. A Cox proportional hazard model was developed to estimate the risk of OSA in patients with JIA. A cumulative probability model was adopted to assess the time-dependent effect of JIA on OSA development, implying a causal link of the association. RESULTS: A total of 2791 patients with JIA were included, and 11 164 individuals without JIA were selected as matched controls. A total of 95 included subjects had OSA: 31 in the JIA group and 64 in the control group. Patients with JIA were more likely to have OSA compared with controls (adjusted hazard ratio, aHR = 1.922, 95% confidence interval [CI] = 1.244-2.970). The incidence of developing OSA was particularly high among patients with JIA-associated deformity that presented at age 18-30 years (aHR = 1.993, 95% CI = 1.277-3.113) and males (aHR = 1.786, 95% CI = 1.097-2.906). The risk of developing OSA increased over 60 months (aHR = 2.523, 95% CI = 1.322-4.815) of follow-up after the JIA diagnosis. CONCLUSIONS: Patients with JIA have a significantly increased risk of developing OSA compared with matched individuals without JIA.

Substitutions of strontium in bioactive calcium silicate bone cements stimulate osteogenic differentiation in human mesenchymal stem cells.

Calcium silicate cements have been considered as alternative bone substitutes owing to its extraordinary bioactivity and osteogenicity. Unfortunately, the major disadvantage of the cements was the slow degradation rate which may limit the efficiency of bone regeneration. In this study, we proposed a facile method to synthesize degradable calcium silicate cements by incorporating strontium into the cements through solid-state sintering. The effects of Sr incorporation on physicochemical and biological properties of the cements were evaluated. Although, our findings revealed that the incorporation of strontium retarded the hardening reaction of the cements, the setting time of different cements (11-19 min) were in the acceptable range for clinical use. The presence of Sr in the CS cements would hampered the precipitation of calcium phosphate products on the surface after immersion in SBF, however, a layer of precipitated calcium phosphate products can be formed on the surface of the Sr-CS cement within 1 day immersion in SBF. More importantly, the degradation rate of the cements increased with increasing content of strontium, consequentially raised the levels of released strontium and silicon ions. The elevated dissolving products may contribute to the enhancement of the cytocompatibility, alkaline phosphatase activity, osteocalcin secretion, and mineralization of human Wharton's jelly mesenchymal stem cells. Together, it is concluded that the strontium-incorporated calcium silicate cement might be a promising bone substitute that could accelerate the regeneration of irregularly shaped bone defects.

Trigeminocardiac reflex during non-surgical root canal treatment of teeth with irreversible pulpitis.

BACKGROUND/PURPOSE: Trigeminocardiac reflex (TCR) is a unique clinical incident of acute change in hemodynamic balance, which may lead to hypotension, bradycardia, and even clinical crisis. Up to date, no study so far considers the impact of non-surgical root canal treatment (NSRCT) of irreversible pulpitis teeth under either local infiltration or block anesthesia on hemodynamic change possibly related to TCR. METHODS: This study enrolled 111 patients with 138 irreversible pulpitis teeth that were treated by two sessions of NSRCT. The first session involved mainly the removal of vital pulp tissue with the direct stimulation of the dental branches of the trigeminal nerve, and the second session included the root canal enlargement and debridement with minimal disturbance to the dental branches of the trigeminal nerve. Vital signs mainly the blood pressure were recorded during both NSRCT sessions. RESULTS: The incidences of NSRCT patients with MABP decrease ≧10%, ≧15%, or ≧20% were all significantly higher in the first NSRCT session than in the second NSRCT session (all the P-values < 0.001). In the first NSRCT session, the incidence of patients with MABP decrease ≧10% was significantly associated with tooth type. For both upper and lower teeth, the patients with premolars treated by NSRCR had significantly higher incidences of MABP decrease ≧10% than those with either anterior or molar teeth treated by NSRCR (all the P-values < 0.05). CONCLUSION: We conclude that vital pulp extirpation may lead to a substantial drop in patient's blood pressure possibly related to TCR.

Tensile force on human macrophage cells promotes osteoclastogenesis through receptor activator of nuclear factor κB ligand induction.

Little is known about the effects of tensile forces on osteoclastogenesis by human monocytes in the absence of mechanosensitive cells, including osteoblasts and fibroblasts. In this study we consider the effects of tensile force on osteoclastogenesis in human monocytes. The cells were treated with receptor activator of nuclear factor κB ligand (RANKL) to promote osteoclastogenesis. Then,expression and secretion of cathepsin K were examined. RANKL and the formation of osteoclasts during the osteoclast differentiation process under continual tensile stress were evaluated by Western blot. It was also found that -100 kPa or lower induces RANKL-enhanced tartrate-resistant acid phosphatase activity in a dose-dependent manner. Furthermore, an increased tensile force raises the expression and secretion of cathepsin K elevated by RANKL, and is concurrent with the increase of TNF-receptor-associated factor 6 induction and nuclear factor κB activation. Overall, the current report demonstrates that tensile force reinforces RANKL-induced osteoclastogenesis by retarding osteoclast differentiation. The tensile force is able to modify every cell through dose-dependent in vitro RANKL-mediated osteoclastogenesis, affecting the fusion of preosteoclasts and function of osteoclasts. However, tensile force increased TNF-receptor-associated factor 6 expression. These results are in vitro findings and were obtained under a condition of tensile force. The current results help us to better understand the cellular roles of human macrophage populations in osteoclastogenesis as well as in alveolar bone remodeling when there is tensile stress.

The synergistic effects of Chinese herb and injectable calcium silicate/ß-tricalcium phosphate composite on an osteogenic accelerator in vitro.

This study investigates the physicochemical and biological effects of traditional Chinese medicines on the ß-tricalcium phosphate (ß-TCP)/calcium silicate (CS) composites of bone cells using human dental pulp cell. CS is an osteoconductive and bioactive material. For this research we have combined ß-TCP and CS and check its effectiveness, a series of ß-TCP/CS composites with different ratios of Xu Duan (XD) were prepared to make new bioactive and biodegradable biocomposites for bone repair. XD has been used in Traditional Chinese Medicine for hundreds of years as an antiosteoporosis, tonic and antiaging agent for the therapy of low back pain, traumatic hematoma, threatened abortion and bone fractures. Formation of bone-like apatite, the diametral tensile strength, and weight loss of composites were considered before and after immersion in simulated body fluid (SBF). In addition, we also examined the effects of XD released from ß-TCP/CS composites and in vitro human dental pulp cell (hDPCs) and studied its behavior. The results show the XD-contained paste did not give any demixing when the weight ratio of XD increased to 5-10 % due to the filter-pressing effect during extrusion through the syringe. After immersion in SBF, the microstructure image showed a dense bone-like apatite layer covered on the ß-TCP/CS/XD composites. In vitro cell experiments shows that the XD-rich composites promote human dental pulp cells (hDPCs) proliferation and differentiation. However, when the XD quantity in the composite is more than 5 %, the amount of cells and osteogenesis protein of hDPCs were stimulated by XD released from ß-TCP/CS composites. The combination of XD in degradation of ß-TCP and osteogenesis of CS gives strong reason to believe that these calcium-based composite cements may prove to be promising bone repair materials.

Activation of focal adhesion kinase induces extracellular signal-regulated kinase-mediated osteogenesis in tensile force-subjected periodontal ligament fibroblasts but not in osteoblasts.

The exact mechanism by which focal adhesion kinase (FAK) translates mechanical signals into osteogenesis differentiation in force-subjected cells has not been elucidated. The responses to different forces differ according to the origin of cells and the type of stress applied. Therefore, the recruitment of osteoclast and osteoblast progenitor cells, and the balanced activation of these cells around and within the periodontal ligament (PDL) are essential for alveolar bone remodeling. Cells within the PDL and MG63 cells were subjected to tensile forces of -100 kPa for different periods of time. At various times during the tensile force application, they were processed for the purpose of analyzing cell viability, cell cycle, and osteogenic protein. The effect of small interfering RNA transfection targeting FAK was also evaluated. Tensile force enhanced a rapid increase in the phosphorylation of FAK and up-regulated osteogenic protein expression in PDL cells, but not in MG63 cells. Transfecting PDL cells with FAK antisense oligonucleotide diminished alkaline phosphatase and osteocalcin secretion. These findings suggest that tensile force activates FAK pathways in PDL cells, which down-regulate immune cytokine and up-regulate osteogenic protein.

An in vitro evaluation of aligner force decay in artificial saliva.

Background/purpose: The present study aimed to compare the force decay of invisible aligners for maxillary anterior teeth with 0.1 mm (D1), 0.2 mm (D2), and 0.3 mm (D3) labial movement within a simulated oral environment over 7 days. Materials and methods: The prepared invisible aligners were immersed in saliva (S) and subjected to applied force (F) for 7 days. The aligners were set and placed on the maxillary right central incisor with 0.1 mm (D1), 0.2 mm (D2), and 0.3 mm (D3) labial movement. Thin-film pressure sensors were used to measure the aligner force changes. The data were collected and analyzed by statistical methods. Results: Significant differences were observed in the initial and first-day force between the D2 and D3 groups under simulated oral environment force (SF) (P < 0.05). There was a significant difference in force decay between Day 1 and Day 7 for all groups (P < 0.05). The SFD1 group showed a significant decrease in force on Day 5 (P < 0.05), while the SFD2 and SFD3 groups showed significant force decay on Day 4 (P < 0.05). The force decay ratio on Day 7 was higher in the SFD3 group than in the SFD1 and SFD2 groups, but no significant difference was observed. Conclusion: Larger labial movement of the aligners resulted in higher force decay under artificial saliva environments, and the force decay of invisible aligners was increased by immersion time in artificial saliva.

Force degradation study on aligner plates immersed in various solutions.

Background/purpose: The strength of aligners themselves has a high decay rate and is susceptible to accelerated degradation in the environment. The purpose of this study was to compare three types of invisible aligner films after being immersed in coffee, tea, cola, and red wine for seven days and to evaluate the changes in their strengths. Materials and methods: Three types of invisible aligner plates with a thickness of 0.75 mm, i.e., Duran T (polyethylene terephthalate glycol, PETG), Biolon (polyethylene terephthalate, PET), and Zendura FLX (polyurethane, PU), were soaked in artificial saliva and four drinks (coffee, tea, cola, red wine) for 1, 4, and 7 days. The strength test was performed by using the three-point bending test method. The residual strength ratio for the same type of invisible correction film at the same time was separately recorded. The independent t-test was used to indicate significant differences at P < 0.05. Results: The Biolon invisible correction film soaked in cola, red wine and artificial saliva showed significant differences on the 1st and 4th days (P < 0.05). The Duran T invisible correction film soaked in coffee and artificial saliva showed significant differences on the first day (P < 0.05). The Zendura FLX invisible correction film had a waterproof layer on the surface, and there was no significant difference between soaking in any drink and soaking in saliva (P > 0.05). Conclusion: Invisible correction films with different ingredients soaked in solutions show a strength decay phenomenon, except for those with TPU ingredients.

Clinical evaluation of 3D-printed zirconia crowns fabricated by selective laser melting (SLM) for posterior teeth restorations: Short-term pilot study.

Background/purpose: Zirconia crowns (ZrC) without veneering porcelain have become an effective alternative in clinical practice. Monolithic zirconia restorations fabricated by the dry milling method do not have acceptable clinical properties. This study evaluated the periodontal qualities of three-dimensional printed ZrC using the modified United States Public Health Service (USPHS) criteria. Materials and methods: A total of 15 patients who required dental crowns were recruited, and all 15 teeth were restored with digital 3D-printed ZrC. All crowns were assessed at the time of crown placement and 2, 6, and 24 weeks post-placement. Clinical parameters, including plaque index, gingival index, probing depth, crown marginal integrity, and attrition of the antagonist's teeth, were evaluated and recorded. Results: According to the Modified California Dental Association quality evaluation system, 100% of the crowns received satisfactory grades. Despite the significant increase in plaque index and gingival index at two weeks post-ZrC placement, there was no deterioration in probing depth. Moreover, there was discard usage of ZrC on the antagonist's teeth at 24 weeks posttreatment. Of the 15 crowns, one tooth had to be extracted due to a vertical root fracture. Overall, the digital 3D-printed crowns showed no adverse effects on periodontal tissues after 24 weeks of follow-up. Conclusion: The 3D-printed ZrC showed no periodontal problems. It can serve as an alternative for patients, particularly those with high esthetic expectations.

Low-level diode laser therapy reduces lipopolysaccharide (LPS)-induced bone cell inflammation.

UNLABELLED: In this study, the aim is to investigate the cytologic effects of inflammatory bone cells after in vitro low-level laser therapy (LLLT). A human osteosarcoma cell line (MG63) was cultured, infected with lipopolysaccharide (LPS) and exposed to low-level laser treatment at 5 or 10 J/cm(2) using a 920 nm diode laser. MG63 cell attachment was observed under a microscope, and cell viability was quantified by mitochondrial colorimetric assay (MTT). LPS-treated MG63 cells were irradiated with LLLT, and the inflammatory markers iNOS, TNF-α and IL-1, were analyzed by reverse transcription polymerase chain reaction (RT-PCR) and Western blot. The data were collected and analyzed by one-way analysis of variance (ANOVA); p < 0.05 indicated a statistically significant difference. Low-level laser treatment on MG63 cells increased their ability to attach and survive. After irradiation, the expression levels of iNOS, TNF-α and IL-1 in LPS-infected MG63 cells decreased over time (p < 0.05). CONCLUSIONS: low-level diode laser treatment increased the MG63 cell proliferative ability and decreased the expression of inflammatory mediators in MG63 cells.

An in vitro comparison of the frictional forces between archwires and self-ligating brackets of passive and active types.

The aim of this study was to compare the static and kinetic frictional forces generated by various contemporary designs of self-ligating brackets (SLBs) and different wire alloys. In total, six different brackets (four passive type SLB, one active SLB, and one conventional bracket) were investigated using stainless steel, nickel-titanium, and titanium-molybdenum alloy archwires of several sizes. The friction forces were measured by sliding on a bracket-wire combination system in an EZ instron testing machine. A scanning electron microscope (SEM) was used to examine the wear effects of the wall surfaces of bracket slots. Energy-dispersive spectroscopy (EDS) was used to identify the elemental compositions of the bracket surfaces. The data were collected and statistically analysed using analysis of variance. The results of static and kinetic frictional forces were lower in passive type SLBs (P < 0.05), except in the Smart Clip bracket. The wire materials or wire dimensions in the present study showed similar friction forces with no statistical differences (P > 0.05). The wearing effects were not obviously found in bracket slots under SEM observation. Only conventional brackets and mini-Clippy SLB revealed nickel ions via EDS analysis. This study shows that passive SLBs are associated with lower static or kinetic friction forces than those of active SLBs or conventional brackets. Wear on the bracket slots was not observed in the present study.

The different irradiation parameters of carbon dioxide laser effects on periodontal ligament cells.

Background: /purpose: Photobiostimulation (PBS) can affect cellular functions. The objective of the present study was to evaluate the cellular changes in periodontal ligament (PDL) cells that received different carbon dioxide (CO2) laser irradiation parameters under negative pressure culture. Materials and methods: The negative pressure-cultured PDL cells on normal medium and differentiation medium were subjected to continuous irradiation with a CO2 laser at an energy density of 5 J/cm2 or 10 J/cm2. The irradiated PDL cells were harvested at Days 1, 5 and 7, and their viability was analyzed by the Presto Blue assay and the biologic markers alkaline phosphatase (ALP), bone sialopoietin (BSP), osteopontin (OPN), osteocalcin (OC), matrix metalloproteinase-3 (MMP-3) collagen I (Col I) and cyclooxygenase-2 (COX-2) expression by reverse transcription-polymerase chain reaction (RT-PCR). Results: The PDL cell viability showed that the differentiation medium groups were higher than the normal culture groups. The cell morphologies were all expressed as spindle type. The inflammatory markers in the laser-irradiated groups were higher on the first day and decreased on the seventh day (P < 0.05). Osteogenesis markers were highly expressed at different time periods (P < 0.05). The Col I and OPN genes were highly expressed on the first day, and the Col I high expression lasted until the seventh day. The OC gene was highly expressed on the seventh day. The effects of PDL cultured in differential medium and normal medium were the same in the present study. Conclusion: A low-dose CO2 laser continuously irradiating cultured PDL cells can induce osteogenesis and reduce cell inflammatory expression.

The Effect of Probiotics Use on Salivary Cariogenic Bacteria in Orthodontic Patients with Various Caries Risk Status.

BACKGROUND: The purpose of this study was to evaluate the change in intraoral cariogenic bacteria density after probiotic use in patients with orthodontic treatment, and to compare the impact of probiotics in patients with various caries risk status. METHODS: Patients that planned to receive orthodontic treatment were recruited according to this study's inclusion/exclusion criteria. A probiotic prescription (Lactobacteria 3 mg, Glycobacteria 2 mg) was started one month after the initial orthodontic treatment. Saliva sampling and cultures using a CRT kit (caries risk test) were performed at three time points (T0, T1, T2). Mutans streptococci (MS) and Lactobacilli (LB) density were evaluated and scored using the interpretation chart in the CRT kit to evaluate the change in bacteria density at three time points, to define the high and low caries risk prior to orthodontic treatment, and to evaluate if there were differences in probiotics between the high and low caries risk groups. RESULTS: Thirty-three orthodontic patients were enrolled, twenty-two classified as high caries risk and eleven as low caries risk. After undergoing treatment for one month, the densities of MS and LB increased significantly (p = 0.011, p = 0.001); probiotics for one month decreased the density of MS and LB, but the differences were statistically nonsignificant (p = 0.109, p = 0.109). Patients classified as low risk of caries demonstrated an increase in MS and LB density one month after orthodontic treatment (p = 0.024, p = 0.001), probiotic use did not result in a significant reduction in bacteria density (p = 1000, p = 0.933). In patients with high caries risk, there were no statistically significant changes in MS count between the three time points (p = 0.127); a significant change in LB density occurred at T0-T1 (p = 0.011) only. CONCLUSIONS: Supplemental use of probiotic oral tablets during orthodontic treatment aimed at reducing cariogenic bacteria count in saliva did not achieve significant differences, regardless of patients' risk status for caries.

The Synergistic Effect of Cyclic Tensile Force and Periodontal Ligament Cell-Laden Calcium Silicate/Gelatin Methacrylate Auxetic Hydrogel Scaffolds for Bone Regeneration.

The development of 3D printing technologies has allowed us to fabricate complex novel scaffolds for bone regeneration. In this study, we reported the incorporation of different concentrations of calcium silicate (CS) powder into fish gelatin methacrylate (FGelMa) for the fabrication of CS/FGelMa auxetic bio-scaffolds using 3D printing technology. Our results showed that CS could be successfully incorporated into FGelMa without influencing the original structural components of FGelMa. Furthermore, it conveyed that CS modifications both the mechanical properties and degradation rates of the scaffolds were improved in accordance with the concentrations of CS upon modifications of CS. In addition, the presence of CS enhanced the adhesion and proliferation of human periodontal ligament cells (hPDLs) cultured in the scaffold. Further osteogenic evaluation also confirmed that CS was able to enhance the osteogenic capabilities via activation of downstream intracellular factors such as pFAK/FAK and pERK/ERK. More interestingly, it was noted that the application of extrinsic biomechanical stimulation to the auxetic scaffolds further enhanced the proliferation and differentiation of hPDLs cells and secretion of osteogenic-related markers when compared to CS/FGelMa hydrogels without tensile stimulation. This prompted us to explore the related mechanism behind this interesting phenomenon. Subsequent studies showed that biomechanical stimulation works via YAP, which is a biomechanical cue. Taken together, our results showed that novel auxetic scaffolds could be fabricated by combining different aspects of science and technology, in order to improve the future chances of clinical applications for bone regeneration.

Comparison of friction force between corroded and noncorroded titanium nitride plating of metal brackets.

INTRODUCTION: Titanium nitride (TiN) plating is a method to prevent metal corrosion and can increase the surface smoothness. The purpose of this study was to evaluate the friction forces between the orthodontic bracket, with or without TiN plating, and stainless steel wire after it was corroded in fluoride-containing solution. METHODS: In total, 540 metal brackets were divided into a control group and a TiN-coated experimental group. The electrochemical corrosion was performed in artificial saliva with 1.23% acidulated phosphate fluoride (APF) as the electrolytes. Static and kinetic friction were measured by an EZ-test machine (Shimadazu, Tokyo, Japan) with a crosshead speed of 10 mm per minute over a 5-mm stretch of stainless steel archwire. The data were analyzed by using unpaired t test and analysis of variance (ANOVA). RESULTS: Both the control and TiN-coated groups' corrosion potential was higher with 1.23% APF solution than with artificial solution (P <0.05). In brackets without corrosion, both the static and kinetic friction force between the control and TiN-coated brackets groups showed a statistically significant difference (P <0.05). In brackets with corrosion, the control group showed no statistical difference on kinetic or static friction. The TiN-coated brackets showed a statistical difference (P <0.05) on kinetic and static friction in different solutions. CONCLUSION: TiN-coated metal brackets, with corrosion or without corrosion, cannot reduce the frictional force.

Effects of treatment with local anesthetics on RANKL expression in MG63 and PDL cells.

BACKGROUND/PURPOSE: Local anesthesia (LA) application is a routine dental work in clinic. The aim of present study was to evaluate the extent of biologic effects of LA on periodontal ligaments (PDL) or bone cells (MG63). MATERIALS AND METHODS: Local anesthetics (LAs) at different concentrations were added to PDL and MG 63 cells. The viability of the cells was analyzed using an MTT assay. The inflammatory markers, COX-2, IL-1, IL-6 and TNF-A, of PDL and MG63 cells treated with LAs were analyzed with a Western blot assay. The extract medium of the LA-treated PDL cells was added to the MG63 cells for subsequent culture and to examine the RANKL, ALP, and OPG expression. The data were statistically analyzed with p < 0.05 set as an indication of significance. RESULTS: The viability of the PDL and MG63 cells was less 50% at LAs concentrations above the 10 mM. At high LA concentrations, the PDL and MG63 cells treated with LAs became spherical in shape, or vesicles developed in the cytoplasm. The IL-1, IL-6, and TNF-A expression in the PDL groups showed no statistical differences between Septanest and Scandonest (p > 0.05). The RANKL expression in the MG63 cells increased as the Septanest and Scandonest concentrations were increased in the PDL extract medium (p < 0.05) after 48 h of culturing. CONCLUSION: The LAs with adrenaline increased inflammation in the PDL and MG63 cells. The LA-treated PDL extract medium increased the RANKL expression in the MG63 cells.

Effects of different aligner materials and attachments on orthodontic behavior.

BACKGROUND/PURPOSE: The orthodontic aligner becomes popular worldwide in orthodontic therapy as an esthetic alternative to fixed labial braces. This study evaluated orthodontic tooth movement behavior using different aligner materials and attachment shapes for the movement of a single tooth. MATERIALS AND METHODS: First bicuspid extracted resin typodont models were printed with a 3D printer. Three type of attachments, an ellipsoid shape (thick and thin) and a bar, were designed to fit the canine crown surface. Three types of aligner materials, Polyethylene Terephthalate enhanced with glycol (BIOSTAR) Polyethylene Terephthalate (BenQ), and Thermoplastic polyurethanes (TPU) were used to fabricate different aligners. The typodonts with aligners were sunk in a water bath to simulate canine distal movement in vivo. The canine crown, root movement, and long axis angle changes in each step were calculated and recorded. The data were analysed using a oneway ANOVA statistical method. RESULTS: Comparing the three aligners, the changes the long axis of the canine showed that the BENQ group had a smaller change in the long axis angle. The BENQ group canine involved bodily movement, but the canine movement of the BIOSTAR and TPU group involved tipping. Comparing the three attachments, the bar type attachment had more canine crown tipping in the BIOSTAR and TPU groups. The thick and thin ellipsoid-shaped attachments showed no statistical differences in tooth movement. CONCLUSION: Attachment shape or size had little influence on the bodily movement of the tooth. A high modulus material may thus be suitable for clinical applications.

Bidirectional Differentiation of Human-Derived Stem Cells Induced by Biomimetic Calcium Silicate-Reinforced Gelatin Methacrylate Bioink for Odontogenic Regeneration.

Tooth loss or damage is a common problem affecting millions of people worldwide, and it results in significant impacts on one's quality of life. Dental regeneration with the support of stem cell-containing scaffolds has emerged as an alternative treatment strategy for such cases. With this concept in mind, we developed various concentrations of calcium silicate (CS) in a gelatin methacryloyl (GelMa) matrix and fabricated human dental pulp stem cells (hDPSCs)-laden scaffolds via the use of a bioprinting technology in order to determine their feasibility in promoting odontogenesis. The X-ray diffraction and Fourier transform-infrared spectroscopy showed that the incorporation of CS increased the number of covalent bonds in the GelMa hydrogels. In addition, rheological analyses were conducted for the different concentrations of hydrogels to evaluate their sol-gel transition temperature. It was shown that incorporation of CS improved the printability and printing quality of the scaffolds. The printed CS-containing scaffolds were able to release silicate (Si) ions, which subsequently significantly enhanced the activation of signaling-related markers such as ERK and significantly improved the expression of odontogenic-related markers such as alkaline phosphatase (ALP), dentin matrix protein-1 (DMP-1), and osteocalcin (OC). The calcium deposition assays were also significantly enhanced in the CS-containing scaffold. Our results demonstrated that CS/GelMa scaffolds were not only enhanced in terms of their physicochemical behaviors but the odontogenesis of the hDPSCs was also promoted as compared to GelMa scaffolds. These results demonstrated that CS/GelMa scaffolds can serve as cell-laden materials for future clinical applications and use in dentin regeneration.

The synergistic effects of Xu Duan combined Sr-contained calcium silicate/poly-ε-caprolactone scaffolds for the promotion of osteogenesis marker expression and the induction of bone regeneration in osteoporosis.

Osteoporosis and its related problems such as fractures are gradually becoming common due to an aging population. Current methods to treat osteoporosis include medical and surgical options such as bone implants. Recent developments in 3D printing and materials science technologies has allowed us to fabricate individualized scaffolds with desired properties. In this study, we mixed Xu Duan into strontium­calcium silicate powder at 5% (XD5) and 10% (XD10) and fabricated 3D scaffolds with polycaprolactone. All scaffolds were assessed for its physical, mechanical, and biological properties to evaluated for its feasibility for bone tissue engineering in the osteoporosis model. Our results showed that such a scaffold could be fabricated using extrusion-based printing techniques and that addition of XD did not alter original structural properties of the SrCS. Furthermore, the XD5 and XD10 scaffolds were found to be non-toxic to cells and cells cultured on the scaffolds had significantly higher proliferation and secreted increased osteogenic-related proteins in in vitro studies as compared to the XD0 groups. Remarkably, the XD10 scaffolds could be used as substitutes for the critical-sized bone defect (7.0 mm diameter and 8.0 mm depth) in the osteoporotic rabbit model. The XD10 scaffolds can enhance bone ingrowth and accelerate new bone regeneration even in complex osteoporotic pathological environments. These results showed that such a Chinese medicine-contained scaffold had potential in osteoporosis bone tissue regeneration and could be considered as a promising tool for future clinical used applications.