Cell monolayer deformation microscopy reveals mechanical fragility of cell monolayers following EMT.

Tissue and cell mechanics are crucial factors in maintaining homeostasis and in development, with aberrant mechanics contributing to many diseases. During the epithelial-to-mesenchymal transition (EMT), a highly conserved cellular program in organismal development and cancer metastasis, cells gain the ability to detach from their original location and autonomously migrate. While a great deal of biochemical and biophysical changes at the single-cell level have been revealed, how the physical properties of multicellular assemblies change during EMT, and how this may affect disease progression, is unknown. Here we introduce cell monolayer deformation microscopy (CMDM), a new methodology to measure the planar mechanical properties of cell monolayers by locally applying strain and measuring their resistance to deformation. We employ this new method to characterize epithelial multicellular mechanics at early and late stages of EMT, finding the epithelial monolayers to be relatively compliant, ductile, and mechanically homogeneous. By comparison, the transformed mesenchymal monolayers, while much stiffer, were also more brittle, mechanically heterogeneous, displayed more viscoelastic creep, and showed sharp yield points at significantly lower strains. Here, CMDM measurements identify specific biophysical functional states of EMT and offer insight into how cell aggregates fragment under mechanical stress. This mechanical fingerprinting of multicellular assemblies using new quantitative metrics may also offer new diagnostic applications in healthcare to characterize multicellular mechanical changes in disease.

MAP4K4 regulates forces at cell-cell and cell-matrix adhesions to promote collective cell migration.

Collective cell migration is not only important for development and tissue homeostasis but can also promote cancer metastasis. To migrate collectively, cells need to coordinate cellular extensions and retractions, adhesion sites dynamics, and forces generation and transmission. Nevertheless, the regulatory mechanisms coordinating these processes remain elusive. Using A431 carcinoma cells, we identify the kinase MAP4K4 as a central regulator of collective migration. We show that MAP4K4 inactivation blocks the migration of clusters, whereas its overexpression decreases cluster cohesion. MAP4K4 regulates protrusion and retraction dynamics, remodels the actomyosin cytoskeleton, and controls the stability of both cell-cell and cell-substrate adhesion. MAP4K4 promotes focal adhesion disassembly through the phosphorylation of the actin and plasma membrane crosslinker moesin but disassembles adherens junctions through a moesin-independent mechanism. By analyzing traction and intercellular forces, we found that MAP4K4 loss of function leads to a tensional disequilibrium throughout the cell cluster, increasing the traction forces and the tension loading at the cell-cell adhesions. Together, our results indicate that MAP4K4 activity is a key regulator of biomechanical forces at adhesion sites, promoting collective migration.

Ruggedized Self-Propelling Hemostatic Gauze Delivers Low Dose of Thrombin and Systemic Tranexamic Acid and Achieves High Survival in Swine With Junctional Hemorrhage.

INTRODUCTION: Hemorrhage is responsible for 91% of preventable prehospital deaths in combat. Bleeding from anatomic junctions such as the groin, neck, and axillae make up 19% of these deaths, and reports estimate that effective control of junctional hemorrhage could have prevented 5% of fatalities in Afghanistan. Hemostatic dressings are effective but are time-consuming to apply and are limited when proper packing and manual pressure are not feasible, such as during care under fire. CounterFlow-Gauze is a hemostatic dressing that is effective without compression and delivers thrombin and tranexamic acid into wounds. Here, an advanced prototype of CounterFlow-Gauze, containing a range of low thrombin doses, was tested in a lethal swine model of junctional hemorrhage. Outcomes were compared with those of Combat Gauze, the current dressing recommended by Tactical Combat Casualty Care. MATERIALS AND METHODS: CounterFlow-Gauze containing thrombin doses of 0, 20, 200, and 500 IU was prepared. Swine received femoral arteriotomies, and CounterFlow-Gauze was packed into wounds without additional manual compression. In a separate study using a similar model of junctional hemorrhage without additional compression, CounterFlow-Gauze containing 500 IU thrombin was tested and compared with Combat Gauze. In both studies, the primary outcomes were survival to 3 h and volume of blood loss. RESULTS: CounterFlow-Gauze with 200 and 500 IU had the highest 3-h survival, achieving 70 and 75% survival, respectively. CounterFlow-Gauze resulted in mean peak plasma tranexamic acid concentrations of 9.6 ± 1.0 µg/mL (mean ± SEM) within 3 h. In a separate study with smaller injury, CounterFlow-Gauze with 500 IU achieved 100% survival to 3 h compared with 92% in Combat Gauze animals. CONCLUSIONS: An advanced preclinical prototype of CounterFlow-Gauze formulated with a minimized thrombin dose is highly effective at managing junctional hemorrhage without compression. These results demonstrate that CounterFlow-Gauze could be developed into a feasible alternative to Combat Gauze for hemorrhage control on the battlefield.

Percutaneous delivery of self-propelling hemostatic powder for managing non-compressible abdominal hemorrhage: a proof-of-concept study in swine.

INTRODUCTION: Non-compressible intra-abdominal hemorrhage (NCIAH) is a major cause of preventable death on the battlefield and in civilian trauma. Currently, it can only be definitively managed with surgery, as there are limited strategies for controlling ongoing NCIAH in the prehospital environment. We hypothesized that a self-propelling thrombin-containing powder (SPTP) could increase survival in a swine model of NCIAH when delivered percutaneously into the closed abdomen using an engineered spray system. MATERIALS AND METHODS: Nineteen swine underwent surgical laparotomy followed by a Grade V liver injury that created massive hemorrhage, before closing the abdomen with sutures. Animals either received treatment with standard of care fluid resuscitation (n=9) or the SPTP spray system (n=10), which consisted of a spray device and a 14 Fr catheter. Using the spray system, SPTP was delivered into a hemoperitoneum identified using a focused assessment with sonography in trauma (FAST) exam. Lactated Ringer's solution was administered to all animals to maintain a mean arterial pressure (MAP) of >50 mmHg. The primary outcome was percentage of animals surviving at three hours following injury. RESULTS: In the swine model of NCIAH, a greater percentage of animals receiving SPTP survived to three hours, although differences were not significant. The SPTP spray system increased the median survival of animals from 1.6 hr in the fluid resuscitation group to 4.3 hr. The SPTP spray system delivered a total mass of 18.5 ± 1.0 g of SPTP. The mean change in intra-abdominal pressure following SPTP delivery was 5.2 ± 1.8 mmHg (mean ± SEM). The intervention time was 6.7 ± 1.7 min. No adverse effects related to the SPTP formulation or the spray system were observed. SPTP was especially beneficial in animals that had either severely elevated lactate concentrations or low mean arterial pressure of <35 mmHg shortly after injury. CONCLUSIONS: This demonstrates proof-of-concept for use of a new minimally invasive procedure for managing NCIAH, which could extend survival time to enable patients to reach definitive surgical care.

Centrifugation and index matching yield a strong and transparent bioinspired nacreous composite.

Glasses have numerous applications because of their exceptional transparency and stiffness; however, poor fracture, impact resistance, and mechanical reliability limit the range of their applications. Recent bioinspired glasses have shown superior mechanical performance, but they still suffer from reduced optical quality. Here, we present a nacreous glass composite that offers a combination of strength, toughness, and transparency. Micrometer-sized glass tablets and poly(methyl methacrylate) (PMMA) were mixed and structured by centrifugation, creating dense PMMA-glass layers. A transparent composite was created by tuning the refractive index of PMMA to that of glass and using chemical functionalization to create continuous interfaces. The fabrication method is robust and scalable, and the composite may prove to be a glass alternative in diverse applications.

Pattern-Based Contractility Screening, a Reference-Free Alternative to Traction Force Microscopy Methodology.

The sensing and generation of cellular forces are essential aspects of life. Traction force microscopy (TFM) has emerged as a standard broadly applicable methodology to measure cell contractility and its role in cell behavior. While TFM platforms have enabled diverse discoveries, their implementation remains limited in part due to various constraints, such as time-consuming substrate fabrication techniques, the need to detach cells to measure null force images, followed by complex imaging and analysis, and the unavailability of cells for postprocessing. Here we introduce a reference-free technique to measure cell contractile work in real time, with commonly available substrate fabrication methodologies, simple imaging, and analysis with the availability of the cells for postprocessing. In this technique, we confine the cells on fluorescent adhesive protein micropatterns of a known area on compliant silicone substrates and use the cell deformed pattern area to calculate cell contractile work. We validated this approach by comparing this pattern-based contractility screening (PaCS) with conventional bead-displacement TFM and show quantitative agreement between the methodologies. Using this platform, we measure the contractile work of highly metastatic MDA-MB-231 breast cancer cells that is significantly higher than the contractile work of noninvasive MCF-7 cells. PaCS enables the broader implementation of contractile work measurements in diverse quantitative biology and biomedical applications.

Nuclei deformation reveals pressure distributions in 3D cell clusters.

Measuring pressures within complex multi-cellular environments is critical for studying mechanobiology as these forces trigger diverse biological responses, however, these studies are difficult as a deeply embedded yet well-calibrated probe is required. In this manuscript, we use endogenous cell nuclei as pressure sensors by introducing a fluorescent protein localized to the nucleus and confocal microscopy to measure the individual nuclear volumes in 3D multi-cellular aggregates. We calibrate this measurement of nuclear volume to pressure by quantifying the nuclear volume change as a function of osmotic pressure in isolated 2D culture. Using this technique, we find that in multicellular structures, the nuclear compressive mechanical stresses are on the order of MPa, increase with cell number in the cluster, and that the distribution of stresses is homogenous in spherical cell clusters, but highly asymmetric in oblong clusters. This approach may facilitate quantitative mechanical measurements in complex and extended biological structures both in vitro and in vivo.

On the percolation of alginate/calcium systems at low concentrations.

The sol-to-gel transition of an alginate rich in ß-d-mannuronic acid residues and at a concentration of 0.1% w/v in 15 mM NaCl in the presence of calcium ions of 0 to 3.5mM was studied with dynamic light scattering. The dynamics of the different systems added further insight into the alginate gel forming mechanisms. Below a Ca(2+) concentration of 0.7 mM, the build-up of small aggregates could be verified. Moreover, at a critical concentration, close to 0.9 mM Ca(2+), a percolated, non-ergodic network started to form from some of these aggregates, with smaller aggregates still diffusing in the network. The system displayed strong non-ergodicy at high Ca(2+) concentrations with a non-ergodicity parameter that appeared to form discontinuously from near zero to a clearly non-zero value at the critical Ca(2+) concentration.

Composite alginate gels for tunable cellular microenvironment mechanics.

The mechanics of the cellular microenvironment can be as critical as biochemistry in directing cell behavior. Many commonly utilized materials derived from extra-cellular-matrix create excellent scaffolds for cell growth, however, evaluating the relative mechanical and biochemical effects independently in 3D environments has been difficult in frequently used biopolymer matrices. Here we present 3D sodium alginate hydrogel microenvironments over a physiological range of stiffness (E = 1.85 to 5.29 kPa), with and without RGD binding sites or collagen fibers. We use confocal microscopy to measure the growth of multi-cellular aggregates (MCAs), of increasing metastatic potential in different elastic moduli of hydrogels, with and without binding factors. We find that the hydrogel stiffness regulates the growth and morphology of these cell clusters; MCAs grow larger and faster in the more rigid environments similar to cancerous breast tissue (E = 4-12 kPa) as compared to healthy tissue (E = 0.4-2 kpa). Adding binding factors from collagen and RGD peptides increases growth rates, and change maximum MCA sizes. These findings demonstrate the utility of these independently tunable mechanical/biochemistry gels, and that mechanical confinement in stiffer microenvironments may increase cell proliferation.