RESUMEN
Absolute distance measurement is a field of research with a large variety of applications. Laser triangulation is a well-tested and developed technique using geometric relations to calculate the absolute distance to an object. The advantages of laser triangulation include its simple and cost-effective setup with yet a high achievable accuracy and resolution in short distances. A main problem of the technology is that even small changes of the optomechanical setup, e.g., due to thermal expansion, lead to significant measurement errors. Therefore, in this work, we introduce an optical setup containing only a beam splitter and a mirror, which splits the laser into a measurement beam and a reference beam. The reference beam can then be used to compensate for different error sources, such as laser beam dithering or shifts of the measurement setup due to the thermal expansion of the components. The effectiveness of this setup is proven by extensive simulations and measurements. The compensation setup improves the deviation in static measurements by up to 75%, whereas the measurement uncertainty at a distance of 1 m can be reduced to 85 µm. Consequently, this compensation setup can improve the accuracy of classical laser triangulation devices and make them more robust against changes in environmental conditions.
RESUMEN
For applications where only moderate spectral resolution is required, static Fourier transform infrared spectrometers (sFTS) offer a comparatively cost-effective alternative to classical scanning instruments. In this paper, we present an sFTS based on a single-mirror interferometer using only standard optical components and an uncooled microbolometer array. Because the instrument features concave mirrors rather than lenses, dispersion effects can be minimized. This enables broadband operation in the mid-infrared range from 2800 cm-1 to 600 cm-1 at a spectral resolution of 12 cm-1. In addition, the design guarantees comparatively high light throughput and can potentially be designed for increased temperature stability. Alongside a simulation of the temperature- and wavenumber-dependent behavior of the system, we provide a proof of principle of the proposed design by means of experimental results.
RESUMEN
A variety of specialty fibers such as no-core fiber (NCF) have already been studied to reveal their sensing abilities. In this work, we investigate a specialty fiber, square-core fiber, for temperature and strain sensing. A simple single-mode-multimode-single-mode (SMS) fiber sensor was fabricated, consisting of a 30-cm-long square-core fiber. The experimental results indicate that the maximal wavelength-temperature and wavelength-strain sensitivities are -15.3 pm/∘C and -1.5 pm/µÎµ, respectively, while the maximal power-temperature and power-strain sensitivities are 0.0896 dBm/∘C and 0.0756 dBm/µÎµ. Analysis of the results suggests that the fiber sensor has the potential to be used as a high-sensitivity temperature sensor with a low strain sensitivity.