Insights into Transfer of Supramolecular Doxorubicin/Congo Red Aggregates through Phospholipid Membranes.

Doxorubicin (DOX) is a commonly used chemotherapeutic drug, from the anthracycline class, which is genotoxic to neoplastic cells via a DNA intercalation mechanism. It is effective and universal; however, it also causes numerous side effects. The most serious of them are cardiotoxicity and a decrease in the number of myeloid cells. For this reason, targeted DOX delivery systems are desirable, since they would allow lowering the drug dose and therefore limiting systemic side effects. Recently, synthetic dyes, in particular Congo red (CR), have been proposed as possible DOX carriers. CR is a planar molecule, built of a central biphenyl moiety and two substituted naphthalene rings, connected with diazo bonds. In water, it forms elongated ribbon-shaped supramolecular structures, which are able to selectively interact with immune complexes. In our previous studies, we have shown that CR aggregates can intercalate DOX molecules. In this way, they preclude DOX precipitation in water solutions and increase its uptake by MCF7 breast cancer cells. In the present work, we further explore the interactions between DOX, CR, and their aggregates (CR/DOX) with phospholipid membranes. In addition to neutral molecules, the protonated doxorubicin form, DXP, is also studied. Molecular dynamics simulations are employed to study the transfer of CR, DOX, DXP, and their aggregates through POPC bilayers. Interactions of CR, DOX, and CR/DOX with model monolayers are studied with Langmuir trough measurements. This study shows that CR may support the transfer of doxorubicin molecules into the bilayer. Both electrostatic and van der Waals interactions with lipids are important in this respect. The former promote the initial stages of the insertion process, the latter keep guest molecules inside the bilayer.

Nucleoside Analog Reverse-Transcriptase Inhibitors in Membrane Environment: Molecular Dynamics Simulations.

The behavior of four drugs from the family of nucleoside analog reverse-transcriptase inhibitors (zalcitabine, stavudine, didanosine, and apricitabine) in a membrane environment was traced using molecular dynamics simulations. The simulation models included bilayers and monolayers composed of POPC and POPG phospholipids. It was demonstrated that the drugs have a higher affinity towards POPG membranes than POPC membranes due to attractive long-range electrostatic interactions. The results obtained for monolayers were consistent with those obtained for bilayers. The drugs accumulated in the phospholipid polar headgroup region. Two adsorption modes were distinguished. They differed in the degree of penetration of the hydrophilic headgroup region. Hydrogen bonds between drug molecules and phospholipid heads were responsible for adsorption. It was shown that apricitabine penetrated the hydrophilic part of the POPC and POPG membranes more effectively than the other drugs. Van der Waals interactions between S atoms and lipids were responsible for this.

The Molecular Bases of the Interaction between a Saponin from the Roots of Gypsophila paniculata L. and Model Lipid Membranes.

In view of the possible medical applications of saponins, the molecular structure of a GOTCAB saponin from the roots of Gypsophila paniculata L. was determined by NMR. The biological activity of saponins may depend on the interaction with cell membranes. To obtain more insight in the mechanism of membrane-related saponin function, an experimental and theoretical study was conducted. Ternary lipid systems composed of sphingomyelin, 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine, and cholesterol were used as models of mammalian cell membranes. The membrane-saponin interaction was studied experimentally by monitoring surface pressure in the monomolecular films formed at the air-aqueous subphase interface. The behavior of GOTCAB saponin in a water box and model monolayer systems was characterized by molecular dynamics simulations. The results obtained showed that, in the systems used, cholesterol had a decisive effect on the interaction between GOTCAB and phosphocholine or sphingomyelin as well as on its location within the lipid film.

Congo Red as a Supramolecular Carrier System for Doxorubicin: An Approach to Understanding the Mechanism of Action.

The uptake and distribution of doxorubicin in the MCF7 line of breast-cancer cells were monitored by Raman measurements. It was demonstrated that bioavailability of doxorubicin can be significantly enhanced by applying Congo red. To understand the mechanism of doxorubicin delivery by Congo red supramolecular carriers, additional monolayer measurements and molecular dynamics simulations on model membranes were undertaken. Acting as molecular scissors, Congo red particles cut doxorubicin aggregates and incorporated them into small-sized Congo red clusters. The mixed doxorubicin/Congo red clusters were adsorbed to the hydrophilic part of the model membrane. Such behavior promoted transfer through the membrane.

Charge distributions for molecular dynamics simulations from self-consistent polarization method.

Partial atomic charges are important force field parameters. They are usually computed by applying quantum-chemical calculations and the assumed population scheme. In this study polarization consistent scheme of deriving a charge distribution inside solute molecule is proposed. The environment effect is explicitly taken into account by distributing solvent molecules around the solute target. The performed analysis includes a few computational schemes (HF, MP2, B3LYP, and M026X), basis sets (cc-pvnz, n = 2, 3, …, 6), and electrostatically derived charge distributions (KS, CHELP, CHELPG, and HLY). It is demonstrated that the environment effect is very important and cannot be disregarded. The second solvation shell should be included to achieve the charge convergence. Huge corrections to charge distribution are due to induction and dispersion. The B3LYP/cc-pvqz level of theory is recommended for deriving the charges within self-consistent polarization scheme.

Properties of Lipid Models of Lung Surfactant Containing Cholesterol and Oxidized Lipids: A Mixed Experimental and Computational Study.

We introduce and study a multicomponent lipid film mimicking lipid composition of the human lung surfactant. It consists of phospholipids with various lipid headgroups and tail saturation. Furthermore, it includes cholesterol and oxidized lipids. Langmuir trough and fluorescence microscopy experiments are combined with fully atomistic molecular dynamics simulations. The considered lipid mixtures form complex interfacial films with properties modulated by lateral compression. Cholesterol laterally condenses, and oxidized lipids laterally expand the films; both types of molecules increase film miscibility. Oxidized lipids also alter the lipid-water interface enhancing film hydration; this effect can be partially reversed by cholesterol. Regarding presentation of different chemical moieties toward the aqueous subphase, the zwitterionic phosphatidylcholine groups dominate at the lipid-water interface, while both the negatively charged phosphatidylglycerol and hydroxyl group of cholesterol are less exposed. The investigated synthetic lipid-only mimic of the lung surfactant may serve as a basis for further studies involving nonlipid pulmonary surfactant components.

Nanoscale investigation of the interaction of colistin with model phospholipid membranes by Langmuir technique, and combined infrared and force spectroscopies.

Colistin (Polymyxin E), an antimicrobial peptide, is increasingly put forward as salvage for severe multidrug-resistant infections. Unfortunately, colistin is potentially toxic to mammalian cells. A better understanding of the interaction with specific components of the cell membranes may be helpful in controlling the factors that may enhance toxicity. Here, we report a physico-chemical study of model phospholipid (PL) mono- and bilayers exposed to colistin at different concentrations by Langmuir technique, atomic force microscopy (AFM) and attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR). The effect of colistin on chosen PL monolayers was examined. Insights into the topographical and elastic changes in the PL bilayers within time after peptide injection are presented via AFM imaging and force spectra. Finally, changes in the PL bilayers' ATR-FTIR spectra as a function of time within three bilayer compositions, and the influence of colistin on their spectral fingerprint are examined together with the time-evolution of the Amide II and νCO band integrated intensity ratios. Our study reveals a great importance in the role of the PL composition as well as the peptide concentration on the action of colistin on PL model membranes.

Modeling Lung Surfactant Interactions with Benzo[a]pyrene.

By reducing the surface tension of the air-water interface in alveoli, lung surfactant (LS) is crucial for proper functioning of the lungs. It also forms the first barrier against inhaled pathogens. In this study we inspect the interactions of LS models with a dangerous air pollutant, benzo[a]pyrene (BaP). Dipalmitoylphosphatidylcholine (DPPC), 1-palmitoyl-2-oleoylphosphatidylcholine, and their 1:1 mixture are used as LS models. Pressure-area isotherms are employed to study macroscopic properties of the monolayers. We find that addition of BaP has a condensing effect, manifested by lowering the values of surface pressure and shifting the isotherms to smaller areas. Atomistic details of this process are examined by means of molecular dynamics simulations. We show that initially BaP molecules are accumulated in the monolayers. Upon compression, they are forced to the headgroups region and eventually expelled to the subphase. BaP presence results in reduction of monolayer hydration in the hydrophilic region. In the hydrophobic region it induces increased chain ordering, reduction of monolayer fluidity, and advances transition to the liquid condensed phase in the DPPC system.

Impact of two different saponins on the organization of model lipid membranes.

Saponins, naturally occurring plant compounds are known for their biological and pharmacological activity. This activity is strongly related to the amphiphilic character of saponins that allows them to aggregate in aqueous solution and interact with membrane components. In this work, Langmuir monolayer techniques combined with polarization modulation infrared reflection-absorption spectroscopy (PM-IRRAS) and Brewster angle microscopy were used to study the interaction of selected saponins with lipid model membranes. Two structurally different saponins were used: digitonin and a commercial Merck Saponin. Membranes of different composition, namely, cholesterol, 1,2-dipalmitoyl-sn-glycero-3-phosphocholine or 1,2-dipalmitoyl-sn-glycero-3-phospho-rac-(1-glycerol) were formed at the air/water and air/saponin solution interfaces. The saponin-lipid interaction was characterized by changes in surface pressure, surface potential, surface morphology and PM-IRRAS signal. Both saponins interact with model membranes and change the physical state of membranes by perturbing the lipid acyl chain orientation. The changes in membrane fluidity were more significant upon the interaction with Merck Saponin. A higher affinity of saponins for cholesterol than phosphatidylglycerols was observed. Moreover, our results indicate that digitonin interacts strongly with cholesterol and solubilize the cholesterol monolayer at higher surface pressures. It was shown, that digitonin easily penetrate to the cholesterol monolayer and forms a hydrogen bond with the hydroxyl groups. These findings might be useful in further understanding of the saponin action at the membrane interface and of the mechanism of membrane lysis.

The selective interactions of cationic tetra-p-guanidinoethylcalix[4]arene with lipid membranes: theoretical and experimental model studies.

Behavior of cationic tetra-p-guanidinoethylcalix[4]arene (CX1) and its building block, p-guanidinoethylphenol (mCX1) in model monolayer lipid membranes was investigated using all atom molecular dynamics simulations and surface pressure measurements. Members of two classes of lipids were taken into account: zwitterionic 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) and anionic 1,2-dimyristoyl-sn-glycero-3-phospho-l-serine sodium salt (DMPS) as models of eukaryotic and bacterial cell membranes, respectively. It was demonstrated that CX1 and mCX1 accumulate near the negatively charged DMPS monolayers. The adsorption to neutral monolayers was negligible. In contrast to mCX1, CX1 penetrated into the hydrophobic part of the monolayer. The latter effect, which is possible due to a flip-flop inversion of the CX1 orientation in the lipid layer compared to the aqueous phase, may be responsible for its antibacterial activity.

Glycolipid-cholesterol monolayers: towards a better understanding of the interaction between the membrane components.

In this work, the interaction between a synthetic analog of archaeal lipids and cholesterol was studied using Langmuir technique. The lipid, ß-Mal(3)O(C(16+4))(2), contained phytanyl chains attached via two ether bonds to the sn-2 carbon of the glycerol backbone. The preliminary studies showed that monolayers formed with the pure lipid have a liquid-like character; here, a hypothesis that admixing cholesterol to ß-Mal(3)O(C(16+4))(2) could confer a higher rigidity on the films was tested. To check this proposal, two-dimensional miscibility of cholesterol and ß-Mal(3)O(C(16+4))(2) in monomolecular films was studied using surface pressure and surface potential measurements, as well as Brewster angle microscopy and polarization-modulation infrared reflection absorption spectroscopy. The stability of the monomolecular films was evaluated based on thermodynamics of mixing of cholesterol and ß-Mal(3)O(C(16+4))(2). Atomic level information concerning the orientation of molecules and the degree of hydration of polar headgroups was obtained from molecular dynamics simulations.

The lung surfactant activity probed with molecular dynamics simulations.

The surface of pulmonary alveolar subphase is covered with a mixture of lipids and proteins. This lung surfactant plays a crucial role in lung functioning. It shows a complex phase behavior which can be altered by the interaction with third molecules such as drugs or pollutants. For studying multicomponent biological systems, it is of interest to couple experimental approach with computational modelling yielding atomic-scale information. Simple two, three, or four-component model systems showed to be useful for getting more insight in the interaction between lipids, lipids and proteins or lipids and proteins with drugs and impurities. These systems were studied theoretically using molecular dynamic simulations and experimentally by means of the Langmuir technique. A better understanding of the structure and behavior of lung surfactants obtained from this research is relevant for developing new synthetic surfactants for efficient therapies, and may contribute to public health protection.

Differentiating oxicam nonsteroidal anti-inflammatory drugs in phosphoglyceride monolayers.

Meloxicam, piroxicam, and tenoxicam belong to a highly potent oxicam group of nonsteroidal anti-inflammatory drugs. Whereas the structurally similar oxicams have different pharmacokinetics, treatment efficiency, and adverse effects, their common mechanism of action is the inhibition of a membrane enzyme, cyclooxygenase. Because the prerequisite for accessing the cyclooxygenase by the drugs is interaction with the membrane, the focus of the current study was a comparison of how meloxicam, piroxicam, and tenoxicam interact with lipid monolayers used as models of biological membranes. The monolayers were formed with 1,2-dipalmitoyl-sn-glycero-3-phospho-rac-(1-glycerol), 1,2-dipalmitoyl-sn-glycero-3-phospho-l-serine, 1,2-dipalmitoyl-sn-glycero-3-phosphocholine, 1,2-dipalmitoyl-sn-glycero-3-phosphoethanolamine, 1,2-myristoyl-sn-glycero-3-phosphoethanolamine, and 1,2-dilauroyl-sn-glycero-3-phosphoethanolamine. These systems were examined via surface pressure and surface electrical potential measurements, polarization modulation infrared reflection adsorption spectra, and Brewster angle microscopy. The three oxicams are differentiated in the monolayers; meloxicam shows the highest ability to modify membrane fluidity and surface potential, followed by piroxicam and tenoxicam. The dissimilarity of the biological activity of the oxicams may be linked to different interaction with the membrane, as revealed by the present study.

Lung surfactant monolayer - A good natural barrier against dibenzo-p-dioxins.

The present study deals with interaction of two air pollutants: dibenzodioxin, DD, and its' monochlorinated derivative, 2-chlorodibenzodioxin, 2CLDD, with models of the lung surfactant (LS) system. A monolayer composed of DPPC and POPC in 1:1 molar ratio was used as a model of LS. One component monolayers of DPPC and POPC were also examined, to model the interiors of LC and LE domains in LS, respectively. Molecular dynamics simulations and measurements of surface pressure isotherms, as well as polarization modulation-infrared reflection-absorption spectra were employed to study the influence of dioxins on the monolayers. We demonstrate, that both dioxins adsorb and accumulate in the hydrophobic parts of all three monolayers. DD molecules prefer flat orientation on the surface at large areas. Upon compression, they lift and orient perpendicularly to the monolayer. Flat orientation of DD molecules leads to their large surface area. In consequence they preferentially locate in vicinity of unsaturated chains of POPC - they are small enough to fill void spaces created by kinks in unsaturated chains. 2CLDD orient along monolayer normal already at the largest areas and preference for POPC was not observed for them. In laterally relaxed states, a condensing effect, connected with reduction of surface area available to the lipids was observed for both dioxins. In the case of 2CLDD, additional locally ordering influence of dioxin molecules was detected. In compressed states, the presence of dioxin molecules hinders alignment and uniform ordering of lipid chains.

The role of DPPG in lung surfactant exposed to benzo[a]pyrene.

Lung surfactant (LS) occurs at the air-water interface in the alveoli. Its main function is to reduce the work needed to expand the alveoli during inhalation and prevent the alveolar collapse during exhalation. Disturbance of this complex interfacial system by the uptake of pollutant molecules can lead to changes in fluidity, permeability, phase separation and domain formation, which in turn can lead to serious impairment in lung function. Knowledge of the LS-pollutant interaction is essential for understanding the mechanism of this process. In this study, we investigate the interaction of LS models with benzo[a]pyrene (BaP). Dipalmitoylphosphatidylcholine (DPPC), dipalmitoylphosphatidylglycerol (DPPG) sodium salt, and their 4 : 1 mixture are used as LS models. Surface pressure-area isotherms and molecular dynamics simulations are employed to study the properties of LS monolayers. It was found that the addition of BaP has a destabilizing effect on the mixed DPPC/DPPG monolayer, manifested by the decrease in surface pressure. Compression of a monolayer during a respiratory cycle may expel BaP to the bulk solution. It was demonstrated that DPPG is an active component that prevents the BaP molecule from entering the water subphase; as a minor component of LS it can effectively reduce this process. In addition, the presence of BaP in LS models induces the reduction of monolayer hydration in the hydrophilic region and the increase in chain ordering in the hydrophobic region. The observed changes in monolayer fluidity and phase behavior can be a source of various lung function disorders.

Complexation of metal ions in Langmuir films formed with two amphiphilic dioxadithia crown ethers.

The two new crown ethers presented in this study were synthesized in order to investigate two important features of ionophores, namely metal cation complexation and interfacial properties, and the way in which they interrelate. The two derivatives were conceived as analogs of membrane phospholipids with respect to their amphiphilicity and geometry. They contain a hydrophilic 1,1'-dioxo-3,3'-dithio-14-crown ether headgroup and bear two myristoyl or stearoyl lateral chains. The length of the myristoyl and stearoyl derivatives in an extended conformation is comparable with the thickness of the individual leaflets of cell membranes. The membrane-related and complexation properties of the two crown ether derivatives were studied in monomolecular films spread on pure water and on aqueous solutions of mono-, di-, and trivalent metal salts. The properties of the monolayers are described quantitatively using thermodynamic models. The compression isotherms of the monolayers formed on different subphases show a clear-cut differentiation of the monovalent and di- or trivalent cations with both ligands. This differentiation was interpreted in terms of conformational changes occurring in the crown ether derivatives upon complexation. Molecular modeling indicates that the mono- and divalent cations are coordinated differently by the ligands, yielding complexes with different conformations. The differences of the conformations of the mono- and di- or trivalent cation complexes may be important from the point of view of the interactions with lipid membranes and the biological activity of these potential ionophores.

Interfacial approach to polyaromatic hydrocarbon toxicity: phosphoglyceride and cholesterol monolayer response to phenantrene, anthracene, pyrene, chrysene, and benzo[a]pyrene.

Interactions of phenantrene, anthracene, pyrene, chrysene, and benzo[a]pyrene (polyaromatic hydrocarbons) with model phospholipid membranes were probed using the Langmuir technique. The lipid monolayers were prepared using 1,2-dipalmitoyl-sn-glycero-3-phosphocholine, 1,2-dipalmitoyl-sn-glycero-3-phosphoethanolamine, 1,2-dipalmitoyl-sn-glycero-3-phosphoglycerol, 1,2-dipalmitoyl-sn-glycero-3-phosphoserine, 1,2-myristoyl-sn-glycero-3-phosphoethanolamine, 1,2-dilauroyl-sn-glycero-3-phosphocholine, and cholesterol. Surface pressure and electrical surface potential were measured on mixed phospholipid/PAH monolayers spread on a pure water subphase. The morphology of the mixed monolayers was followed with Brewster angle microscopy. Polarization-modulation infrared reflection-absorption spectroscopy spectra obtained on DPPE/benzo[a]pyrene showed that the latter interacts with the carbonyl groups of the phospholipid. On the other hand, the activity of phospholipase A2 toward DLPC used as a probe to locate benzo[a]pyrene in the monolayers indicates that the polyaromatic hydrocarbons are not accessible to the enzyme. The results obtained show that all PAHs studied affect the properties of the pure lipid, albeit in different ways. The most notable effects, namely, film fluidization and morphology changes, were observed with benzo[a]pyrene. In contrast, the complexity of mixed lipid monolayers makes the effect of PAHs difficult to detect. It can be assumed that the differences observed between PAHs in monolayers correlate with their toxicity.

DFT study on the selectivity of complexation of metal cations with a dioxadithia crown ether ligand.

The interactions of a dioxadithia crown ether ligand with Li(+), Na(+), K(+), Mg(2+), Ca(2+), and Zn(2+) cations were investigated using density functional theory (DFT) modeling. The modeling was undertaken to gain insight into the mechanism of the selective complexation of the mono- and dications observed with this ligand experimentally. Two types of conformationally different complexes were located with both mono- and dications. In the first conformer, the cation is bonded to the ether oxygens; in the second conformer, the cation is bonded to the alkoxy and suger oxygens. In general, the complexes formed with dications were found to be more stable than those with monocations, with the stability decreasing with the period number within a given periodic table group of elements. The highest stability was observed for the complexes formed with zinc. The complex formed with lithium was the most stable among those involving monovalent cations. The system interaction energy was decomposed into electrostatic (ES), polarization (P), charge-transfer (CT), exchange (EX), and geometry-deformation (DEF) contributions using the self-consistent charge and configuration method for subsystems (SCCCMS). The stabilizing energy components (ES, P, and CT) exhibit the same trend as the total interaction energy, whereas the destabilizing contributions (EX and DEF) exhibit the opposite trend. It was found that the main contributions responsible for stabilization of the dicationic systems are the P and ES energies; in the monocationic systems, the CT stabilization is equally important. The gas-phase preferences changed when the solvent effect was included. The dioxadithia crown ether ligand preserved its selectivity toward Zn(2+), but the selectivity sequence toward monovalent cations was reversed.

Calixarenes in a membrane environment: a monolayer study on the miscibility of three p-tert-butylcalix[4]arene beta-lactam derivatives with 1,2-dimyristoyl-sn-glycero-3-phosphoethanolamine.

Literature data indicate that some calixarene derivatives with antimicrobial activities may be useful as drugs; one of the aspects of the biological activity of different classes of antibiotics concerns interactions with lipid membranes. Here, the possibility of incorporation and/or translocation of three amphiphilic p-tert-butylcalix[4]arene derivatives across membranes was studied using lipid monolayers. The derivatives used have 6-aminopenicillanic acid or benzylpenicillin moieties grafted in alternate positions at the calixarene lower rim; 1,2-dimyristoyl-sn-glycero-3-phosphoethanolamine (DMPE), a model bacterial membrane lipid, was used to prepare the monolayers. The miscibility of calixarene-antibiotic conjugates with lipid films was studied using surface pressure and surface potential measurements, as well as Brewster angle microscopy. The results obtained show that the miscibility is significantly different for the 6-aminopenicillanic acid and the two benzylpenicillin derivatives. Molecular modeling allowed the assessment of the lowest energy conformations of the calixarene derivatives and gave more insight into the interactions with the DMPE films.

A Langmuir film approach to elucidating interactions in lipid membranes: 1,2-dipalmitoyl-sn-glycero-3-phosphoethanolamine/cholesterol/metal cation systems.

The interactions between two membrane lipids, 1,2-dipalmitoyl-sn-glycero-3-phosphoethanolamine (DPPE) and cholesterol (CHOL), were studied in Langmuir films using surface pressure isotherms and Brewster angle microscopy. The DPPE/CHOL interactions were probed for chosen monolayer and subphase (Na(+), Ca(2+)) composition at 20, 25, and 30 degrees C. The results obtained show that DPPE and CHOL are miscible for the cholesterol mol fractions x(CHOL)=0.3-0.5. Cholesterol induces condensation of the DPPE monolayers. The most significant condensation of the DPPE/CHOL monolayers was observed in the presence of Ca(2+) ions in the subphase at x(CHOL)=0.4. The negative deviation of the molecular surface area (MMA) additivity from the ideal behavior together with negative values of excess free enthalpy of mixing in the monolayers were interpreted in terms of attractive interactions between lipid molecules.